Canon REALiS LCOS SX6 REALiS SX6 Architect and Engineer Specifications
Canon REALiS LCOS SX6 Manual
 |
View all Canon REALiS LCOS SX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS LCOS SX6 manual content summary:
- Canon REALiS LCOS SX6 | REALiS SX6 Architect and Engineer Specifications - Page 1
have a native resolution of SXGA+ (1400 x 1050). c. The projector must support WXGA (for wide screen use). d. The projector's brightness must be 3500 correction of ±20 degrees vertically. c. The projector must have manual keystone correction of ±20 degrees horizontally. d. The projector must have - Canon REALiS LCOS SX6 | REALiS SX6 Architect and Engineer Specifications - Page 2
Control System Compatibility a. The projector must be certified to be used with AMX, Crestron and Extron systems. Ratings: a. The projector must be powered by 100V to 240V/ 50/60Hz. b. The projector must weight less than 11 pounds. c. The Projector's noise level must not exceed 35dB in brighter mode - Canon REALiS LCOS SX6 | REALiS SX6 Architect and Engineer Specifications - Page 3
Reflective LCD panels (LCoS) x 3 4:3 SXGA+ 3500 ANSI Lumens 88% 1000:1 +/- 20 degrees(Auto/Manual) +/- 20 degrees(Manual) F1.85－2.5 , f=21.7－35.8 mm 9:1, Fixed 1.7x Powered , 12x Digital zoom Powered (Auto/Manual) 40" - 300" 3.9 - 29.5ft (1.2 - 9m) / 100": 9.8 - 16.1ft (3.0 - 4.9m) 1.46-2.43:1 Adobe
-
1 -
2 -
3
 |
 |
REALiS SX6
1/23/08
Architect & Engineer Specification
www.canonprojectors.com
(800) OK-CANON
Bid Spec
1.0 Description
The projector shall be SXGA+ resolution.
It should use LCOS technology with high contrast and
high brightness. .
Projector shall have seemless image with high uniformity.
It must include
power zoom and power focus.
Lens should be of short throw - 100 inch diagonal screen at less
than 10 feet.
2.0 Bid Specification
Technology:
a.
The projector must use the LCOS technology and incorporate AISYS system.
b.
The projector must have a native resolution of SXGA+ (1400 x 1050).
c.
The projector must support WXGA (for wide screen use).
d.
The projector’s brightness must be 3500 lumens with contrast of 1000:1.
e.
The projector lens must have a wide angle (100 inch diagonal screen at less than 10 feet).
f.
The projector must have a built in powered optical zoom lens of 1.7 times.
g.
The projector’s pixel aperture must be 90% or higher.
h.
The projector’s uniformity must be 85% or higher.
Image Adjustments
a.
The projector must have Adobe RGB and sRGB color space.
b.
The projector must have automatic keystone correction of ±20 degrees vertically.
c.
The projector must have manual keystone correction of ±20 degrees horizontally.
d.
The projector must have the ability to be placed in a vertical position with the lens
pointing up or down.
User Friendly Features:
a.
The projector must have auto input detection.
b.
The projector must have auto focus.
c.
The projector must have auto vertical keystone.
d.
The projector must have auto wall color correction.
e.
The projector must have internal charging unit to run fan for time period adequate to cool
lamp when power has been removed from projector.
Inputs and Outputs:
a.
The projector must have one DVI input.
b.
The projector must have ability to accept 2 VGA inputs.
c.
The projector must have one VGA output to drive external monitor or other display device.
d.
The projector must have component input.
e.
The projector must have s-video input.
f.
The projector must have composite video input.
g.
The projector must have a USB port for mouse control through the IR remote.
Power Management
a.
The projector must have an internal condenser to run the fan making it possible
●
To unplug the projector as soon as it is turned off.
●
To prevent damage to the projector and lamp in case of accidental power lost.
Control Management
a.
The projector must have an option network adapter for LAN control.
b.
The projector must have RS-232C serial control port to be used with control systems.
c.
The projector must have an IR sensor in the front and rear for remote control capability.