Canon REALiS LCOS WUX500 WUX500 WUX450ST Users Manual

Canon REALiS LCOS WUX500 Manual

Get Canon REALiS LCOS WUX500 PDF manuals and user guides View all Canon REALiS LCOS WUX500 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon REALiS LCOS WUX500 manual content summary:

  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 1
    PROJECTOR User's Manual Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting ENG
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 2
    to a network are given in the "Advanced Guide" section. Read this manual thoroughly to make the most of your projector. Installation of the projector should be performed by a qualified technician, if possible. Contact the Canon Customer Support
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 3
    Table of Contents How to Use This Manual 2 Projector Highlights 5 Safety Instructions 7 Safety Precautions 8 CAUTION ON HANGING Input Terminal 35 Remote Control 36 Preparing the Remote Control 38 Basic Guide 41 Installation Procedure 42 Setting Up the Projector 42 Relationship between
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 4
    Replacement Lamp 170 Lamp Replacement Procedure ......... 171 Product Specifications 174 Relationship between Aspect and Screen Aspect 174 Displayed Test Patterns 178 Supported Signal Types 179 Troubleshooting 188 LED Indicator Details 188 Symptoms and Solutions 189 Index 195 Option 197 4
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 5
    . Split-Screen Display Splits the screen for projection of two separate input signals at once. (P157) HDBaseT Input The projector supports HDBaseT, a next-generation connectivity standard. HDBaseT offers a convenient connection for carrying high-quality video and audio signals equivalent to HDMI
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 6
    NMPJ), refer to the NMPJ user's manual. -"/ Wi-Fi Connectivity In addition to wired LAN connectivity, the projector also supports Wi-Fi. In Projector Access Point enables projection from multiple computers to multiple projectors. (P113) Canon Service Tool for PJ (Canon ST) An iOS app for easy
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 7
    again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 8
    Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • (1.6') 50 cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended time
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 9
    ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 10
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 11
    Safety Instructions Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. 11
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 12
    limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Park, Melville
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 13
    Safety Instructions Safety Instructions Safety Symbols in this Manual This section describes the safety symbols used in this manual. Important projector safety information is identified by the following symbols. Always observe the safety information by these symbols. Denotes the risk of death or
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 14
    Safety Instructions Precautions for Use As this section contains important safety-related situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. • If smoke is
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 15
    Safety Instructions Safety Instructions Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so may cause a fire, electric
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 16
    Safety Instructions Installation and Handling Precautions Pay attention to the following points regarding hot. If inspection, maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including consumable parts) or the remote
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 17
    Safety Instructions Safety Instructions Pay attention to the following points regarding installation and or sponge mat, etc. • Be sure to ask a qualified technician or the Canon Customer Support Center to perform the installation work. Poor installation work could result in an accident. • For
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 18
    Safety Instructions Precautions on the Lamp This projector uses a high-pressure In this case, never attempt to replace the lamp by yourself. Always request service from a qualified technician or the Canon Customer Support Center. • With ceiling-mounted projectors, the lamp may fall out when you
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 19
    Safety Instructions Safety Instructions Precautions for the Batteries of the Remote Control Pay attention to the following points regarding handling of batteries. Failing to do so could result in a
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 20
    Safety Instructions Pay attention to the following points regarding installation and handling of the projector. • If the projector will not be used for a long period of time,
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 21
    For Safe Use For Safe Use Pay attention to the following points when carrying or transporting the projector. • This projector is a precision instrument. Do not knock it over or subject it to impacts. Doing so may cause a malfunction. • Protection of the projector cannot be guaranteed if used
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 22
    the adjustable feet before moving the projector. Leaving the feet extended may cause damage. Precautions for Installation Be sure to read "Safety Instructions" and "For Safe Use" (P7 - P21). Also take the following precautions during installation. • Do not strike the projector or Air intake vent
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 23
    above 2,300 m (7,545.8'), Adjust the Settings Projector settings must be adjusted when using the projector at altitudes of 2,300 m (7,545.8') or higher. Specifically, refer to instructions for [Fan mode] (P92) in the [Install settings] menu. 23
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 24
    Before Installation ■ When Using Mounted on the Ceiling When the projector is used mounted on the ceiling or installed in a high location, it is necessary to periodically clean the air intake and exhaust vents, and the area around the air filter. Dust that accumulates in intake or exhaust vents may
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 25
    must also be adjusted. • For upward or downward projection, refer to instructions for [Vertical projection] (P93) in the [Install settings] menu. • Always request installation by a qualified technician or the Canon Customer Support Center. 10° 10° Upward projection: Inclination of the projector
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 26
    Before Installation Copyright Notice Please note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright or the copyright holder of the original material. Ensure Network Security Take measures to ensure network
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 27
    PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NO SUPPORT Canon Inc., and all its subsidiaries or its dealers do not make any support service regarding the source code. Canon Inc., and all its subsidiaries or its dealers shall not respond to any
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 28
    RC06) Optional remote controls are also available (RS-RC05). However, some buttons are not supported with this projector. The RS-RC05 can also be used as a wired remote. ( 5.9') For Continental Europe • Important Information For the U.S.A. and Canada • User's Manual (CD-ROM) • Warranty Card 28
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 29
    Before Use Before Use ■ Attaching the Lens Cap WUX500: Align the lens cap notch with the optical zoom adjustment lever as shown and attach the cap. WUX450ST: There is no need to align the lens cap when attaching it. • Always remove the cap before projection. Accidentally leaving the cap on during
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 30
    Before Use Part Names Projector (WUX500) ■ Front Side Hole caps (P43) Attach option feet (sold separately). LED indicators (P33) Power cord connector (P51) Terminals and connectors (P35) Side control (P32) ■ Rear Side Projection lens (P32) Infrared remote receiver (P39) Air intake vent Air
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 31
    Before Use Projector (WUX450ST) ■ Front Side Before Use Hole caps (P43) Attach option feet (sold separately). LED indicators (P33) Power cord connector (P51) Terminals and connectors (P35) Side control (P32) ■ Rear Side Projection lens (P32) Infrared remote receiver (P39) Air intake vent Air
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 32
    Before Use Projection Lens WUX500 WUX450ST (1) (2) (2) (1) Optical zoom adjustment (WUX500) Move the lever to resize the image. (P58) (2) Focus adjustment Turn the focus ring to adjust image focus. (P58) Side Control (6) (7) (5) (4) (3) (2) (1) (1) POWER button (P52, P68) Turns the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 33
    under normal conditions when the power is on. • WARNING (red) : Lights up or flashes when an error occurs. • LAMP (orange) : Lights up or flashes when a problem occurs with the lamp or lamp cover. • TEMP (red) : Lights up or flashes when the internal temperature is high. 33
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 34
    Before Use ■ LED Indicator Displays The LED indicators flash or illuminate to indicate the operating status of the projector. Legend: Example of when the POWER ON indicator is on; : Off : Lit : Flashing LED indicator POWER ON (green) WARNING (red) LAMP (orange) TEMP (red) Operating status A
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 35
    (shielded twisted pair) can be used for both video and audio input. This terminal can also be used to connect the projector to a network. (10) Service port (CONTROL) (P185) Used for executing user commands (P186 - P187). 35
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 36
    Before Use Remote Control The projector can be operated using buttons on the remote control or the side control on the projector. The remote control allows you to operate all functions of the projector. (4) KEYSTONE button (P64) (8) Corrects keystone distortion. The [Keystone] setting enables
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 37
    Before Use Before Use (14) EXIT button (P74) Cancels functions such as menu display or test pattern during operation and returns to the image display. (15) VOL button Adjusts the sound volume. (10) [+] button: Increases the volume. [-] button: Decreases the volume. (11) (16) TEST PATTERN
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 38
    Before Use Preparing the Remote Control ■ Installing Remote Control Batteries 1 Open the battery compartment lid. Slide the lid while pressing it down. 2 Insert batteries. Insert 2 new AAA batteries in the compartment with the + and - terminals positioned correctly. 3 Close the compartment lid.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 39
    Before Use Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 25° WUX500 8 m (26.3') 8 m (26.3') 25° 25° 25° 25° WUX450ST 4 m (13.1') 8 m (26.3') 25° 25° •
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 40
    Before Use ■ Using an Optional Wired Remote (RS-RC05) To use a wired remote control with the projector, use the RS-RC05, sold separately. Use a cable with a ø3.5 mm stereo mini jack (not included). Remote control (RS-RC05) Terminal for wired remote control ø3.5 mm stereo mini jack cable (not
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 41
    Basic Guide Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting 41
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 42
    front of the screen. On some screens, colors may appear distorted when images are viewed from the side, but this does not indicate a problem with the projector. For best results, use a matte screen with a wide viewing angle (WUX450ST). Screen Viewing areas where colors may appear distorted 30
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 43
    Basic Guide Installation Procedure Installation Procedure ■ Installation Tilted Upward To correct keystone distortion when the projector is tilted upward (using adjustable feet, for example), perform keystone correction (
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 44
    Option" (P197). For details, refer to the assembly and installation manual provided with the ceiling attachment. Mounting the Projector on the Ceiling You CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 45
    Height Height Basic Guide Installation Procedure Installation Procedure Relationship between Projecting Distance and Image Size The size of projected images is determined by zooming, relative to the distance from
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 46
    side of the projector, which moves the lens up, down, left, or right. For instructions, refer to "Adjusting the Image Position" (P58). ■ Amount of Lens Shift The described below. Using lens shift outside of this range may cause problems such as peripheral dimness or lower resolution. In this case,
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 47
    Basic Guide Installation Procedure WUX500 Image size (Dia.) 40 60 80 100 150 200 250 300 values are the approximate horizontal lens shift distance from the central image position within the range supported for lens shift. • Watch projected images as you perform lens shift adjustment. • When
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 48
    Connection Procedure Before connecting the projector to other equipment, turn off both the projector and the other equipment. Connecting a Computer Amplified speakers Mini jack RCA terminal Audio cable (not included) Audio cable (not included) AUDIO OUT terminal ANALOG PC-1 / DVI-I terminal
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 49
    Basic Guide Connection Procedure Connecting a Computer (continued) Connection Procedure Computer AUDIO output terminal Monitor output terminal (Mini D-sub 15-pin) Audio cable (not included) Computer cable (not
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 50
    Connection Procedure Connecting AV Equipment Amplified speakers RCA Mini jack terminal AV equipment RCA Mini jack terminal D terminal RCA component terminal Audio cable (not included) Audio cable (not included) D terminal plug - RCA plug component conversion cable (not included) RCA plug
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 51
    Basic Guide Connection Procedure Connection Procedure Notes on HDBaseT • Use a shielded cable rated at CAT5e or better. • Maximum transmission distance is 100 m. • However, maximum transmission distance may
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 52
    Projection Procedure Step 1 Turn the Projector On 1 Check the connection between the projector and the computer or AV equipment. (P48 - P50) For instructions on connecting the power cord, refer to "Plugging the Projector In" (P51). 2 Press the POWER button. The [POWER ON] indicator initially
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 53
    the menu at a later time. (P106) If the language selection screen is out of focus, adjust the focus. (P58) Remote control Projector Basic Guide Projection Procedure An item highlighted in orange will be selected. ■ When the Password Input Screen Appears If you have set a password, the password
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 54
    . • The function key you use and the method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 10, Windows 8.1 or Windows 7, you can turn on image output by holding down the Windows logo key and pressing
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 55
    Basic Guide Projection Procedure Projection Procedure Step 2 Select an Input Signal Select be projected when you have selected [LAN] as the input signal. For details, refer to the NMPJ user's manual. • Images on USB flash drives can be projected when you have selected [USB] as the input signal.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 56
    Projection Procedure Step 3 Adjust the Image Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the display resolution of the computer to the resolution closest to the output signal resolution of the projector. (P179) Maximum resolution 1920 X 1200
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 57
    Basic Guide Projection Procedure Projection Procedure ■ Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 position], [Horizontal pixels] and [Vertical pixels] in [Input signal settings]. (P77) • For the signal types supported by the projector, see the table on page 179 to 180. 57
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 58
    Projection Procedure Focusing, Resizing, or Moving the Image ■ Adjusting Image Focus To adjust the focus, turn the focus ring. WUX500 Focus ring WUX450ST Focus adjustment Focus ring Focus adjustment On the WUX450ST, images will waver as you turn the focus ring. Hold the focus ring on top and
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 59
    Basic Guide Projection Procedure ■ WUX500 Vertical lens shift dial (2) (1) Projection Procedure (3) (4) Horizontal lens shift dial (1) Turning upper lens shift dial clockwise: Moves the image down. (2) Turning upper
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 60
    Projection Procedure Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 61
    Basic Guide Projection Procedure Projection Procedure 3 Select [Screen aspect] with the [ ] / [ ] buttons, and then press the OK button. Remote control Projector 4 Use the [ ] / [ ] buttons to select the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 62
    Projection Procedure 16:9 D. image shift Select this when you use a screen with an aspect ratio of 16:9. Keystone correction cannot be performed in this mode. However, it is possible to move the image up / down when projecting level. For details about how to move the image, refer to "Digital image
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 63
    Basic Guide Projection Procedure Projection Procedure Selecting an Aspect Ratio Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the ASPECT
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 64
    to adjust image width or height distortion separately, and use corner correction to adjust the position of each corner of the image. For instructions on switching keystone correction, refer to "Keystone" (P91). • Keystone correction may not be effective in some lens shift positions. • If keystone
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 65
    Basic Guide Projection Procedure Projection Procedure 2 Press the pointer buttons to adjust the dimensions. Remote control Projector To correct top distortion, press the [ ] button. To correct bottom
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 66
    Projection Procedure 2 Press the pointer button of the corner for correction, and then press the OK button. Remote control Projector 3 Press the pointer buttons to adjust the corner. Remote control Projector 4 When you have finished correcting, press the OK button. Corner adjustment settings
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 67
    Basic Guide Projection Procedure Projection Procedure Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 68
    Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) Remote control You can also select any image mode from the [
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 69
    Basic Guide Convenient Features Convenient Features This section describes features convenient project images stored on a USB flash drive simply by connecting it to the USB port. For instructions on projection from a USB flash drive in the projector's USB port, see "Projecting Images on a USB Flash
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 70
    Convenient Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see "Test pattern" (P98) or "
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 71
    Advanced Guide Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting 71
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 72
    Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [Input settings] tab (P75) You can set the type of signal or the method of projection of the images input. [Image adjustment] tab (P82) You can adjust
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 73
    button to display the menu window. Remote control Projector Using Menus 2 Press the [ ] / [ ] buttons to select a tab. Remote control Projector Advanced Guide Using Menus • If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to move the current selection to the top
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 74
    screen (1) Example: Menu position (P97) 1. Select [Menu position]. 2. Press the OK button to display a different screen. 3. Then follow the instruction on the screen. Selecting from a different screen (2) Example: Tracking (P77) 1. Select [Input signal settings]. 2. Press the OK button to display
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 75
    ratio, resolution, and projection from a USB flash drive. Advanced Guide Menu Description (When the input signal is Analog PC-1) Menu Function adjusts display position misalignment and screen flickering. Input signal select Manually set a resolution to suit computer images. Input signal
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 76
    insufficient, adjust [Total dots], [Tracking], [Horizontal/Vertical position] and [Horizontal/Vertical pixels] in [Input signal settings]. (P77) • For supported signals, see the table on page 179 - 180. Input signal select > [Input settings] > [Input signal select] Select a suitable resolution
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 77
    [Input settings] > [Input signal settings] Complete input signal settings. Use the [ ] / [ ] buttons to adjust the levels as needed. Advanced Guide Menu Description Submenu Total dots Tracking Horizontal position Vertical position Horizontal pixels Vertical pixels Function Adjust the total number
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 78
    > [Input settings] > [PC-free multi projection] Specify settings when projecting images on a USB flash drive to multiple networked projectors. For instructions, see "Using PC-Free Multi Projection" (P154). Mode setting Specify the mode for PC-free multi projection: Primary*1 or Secondary*2 mode
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 79
    the left side and 50% for the right. Mode 7-3 Use 70% of the screen width for the left side and 30% for the right. Advanced Guide Menu Description Network and USB input cannot be combined for split-screen display. Similarly, HDBaseT and HDMI input cannot be combined. • Control can be switched
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 80
    level is selected automatically. (Some AV equipment and HDBaseT transmitters may not support this.) • If your AV equipment HDMI output can be set to [ or [Expanded]. For more detailed information, refer to the user's manual for the AV equipment connected to the projector. Color space > [Input
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 81
    Advanced Guide Menu Description Menu Description Progressive > [Input settings] > [Progressive] Performs progressive processing optimized for still images in cinematic content or moving images in videos. Option Off
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 82
    Menu Description Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. (When the input signal is Analog PC-1) Menu Function Details Image mode * Select overall image quality to suit the projected image. P83 Create profile Save desired
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 83
    Advanced Guide Menu Description Menu Description Image mode > [Image adjustment] > [Image mode] Select the overall image quality for projected images. Can also be selected by pressing the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 84
    Menu Description Brightness > [Image adjustment] > [Brightness] Adjust image brightness. Contrast > [Image adjustment] > [Contrast] Sharpen or soften image contrast. Sharpness > [Image adjustment] > [Sharpness] Adjust image sharpness. Gamma > [Image adjustment] > [Gamma] Correct image areas that are
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 85
    Advanced adjustment > [Image adjustment] > [Advanced adjustment] Fine-tune noise reduction and color tone. Menu Description Advanced Guide Menu Description Ambient light Minimize the effect of ambient light on the screen. Option Function Off Projects an image with no correction. Adjust
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 86
    Menu Description MPEG noise reduction Reduce MPEG image noise. Option Off Weak Middle Strong Function Disables MPEG noise reduction. Specify one of three levels of intensity of the MPEG noise reduction. This setting is not displayed for LAN or USB input. Mosquito noise reduction Reduce mosquito
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 87
    . Adjustments to white are also applied to the three other colors. Note that adjusting any color will overwrite previous adjustments. Advanced Guide Menu Description • For details on gamma correction, see page 84. • Use input signals or a built-in test pattern for adjustment. • Adjustment
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 88
    Menu Description • Adjustment to settings other than [Ambient light] is stored as setting values for the current input signal and image mode. • Image resolution may seem lower when noise reduction is applied. Lamp mode > [Image adjustment] > [Lamp mode] Reducing the lamp brightness reduces power
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 89
    . Project a test pattern to check the resolution and color of projection during installation. Details P90 P90 P90 P91 P91 P92 P92 P96 P96 P98 Advanced Guide Menu Description 89
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 90
    image is inverted in the vertical direction. • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • Image flipping will reset any adjustment for keystone distortion. In this case, redo the adjustment. Screen
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 91
    Advanced Guide Menu Description Menu Description • Changing the screen aspect will reset any keystone or digital image shift setting. • [Auto] may be automatically selected for the aspect
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 92
    Menu Description Digital image shift > [Install settings] > [Digital image shift] Moves the position of the projected image. For 16:9 D. Image Shift, move images vertically using the [ ] / [ ] buttons, and for 4:3 D. Image Shift, move images horizontally using the [ ] / [ ] buttons. This cannot be
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 93
    Advanced Guide Menu Description Menu Description Incorrect settings may shorten the useful which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see "Projecting from Multiple Projectors at Once (Edge Blending)" (P159). [Off] Disable blending
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 94
    Menu Description Submenu Side Color blending adjustment Left / Right / Top / Bottom Width Start position Function Select the direction of the blending area to adjust. Specify the width between the start and end markers. Moves the position of the start marker. • Large blending areas may cover
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 95
    Advanced Guide Menu Description Submenu Black level adjustment Marker Reset Menu Description Function Because black is lighter in the blending area than in other areas, you can
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 96
    Menu Description Submenu Function Correct image distortion by aligning corners of the blending area with the image from the reference projector. For multi-projection alignment, align the corners with the projector blending area (already adjusted) that forms the basis. Points to adjust Blending
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 97
    position Reposition menu display. Use the buttons to move the menu to the desired position. Guide Shows the guide screen. Option Function Off Hides the guide screen. On Shows the guide screen. The guide screen is shown at the following cases. • No input signal is detected. • An invalid
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 98
    Menu Description Lamp warning display Specify whether to show a lamp replacement message after the lamp has been used for a specified period. Option Function Off The prepare lamp message and the lamp warning are not displayed. On The prepare lamp message and the lamp warning are displayed.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 99
    settings Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations. Advanced Guide Menu Description (When the input signal is Analog PC-1) Menu User screen settings Interface settings Power management mode Power management
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 100
    Menu Description User screen settings > [System settings] > [User screen settings] Capture a logo and specify logo display settings. Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 101
    Advanced Guide Menu Description Menu Description Projector on Select a logo to show after startup while the projector is warming up. Option Function Skip Project input signals immediately
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 102
    Menu Description To Unlock Key Lock Function Turn off the projector and unplug the power plug. Hold down the OK button on the main unit and plug in the power cord, as you continue to hold down the OK button. In a moment, a beep will sound, and the controls will be unlocked. When you access this
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 103
    input signal value received is indicated by a white line. Advanced Guide Menu Description Image signal quality High Middle Low Indicated by the green for the port selected for serial communication. Submenu Function Service port Use the service port (CONTROL). HDBaseT Use the HDBaseT port.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 104
    Menu Description HDMI image input Set the type of equipment which is connected to the HDMI port. Note that to some extent, the [HDMI image input] setting determines which image modes are available. (P67) Option Function Auto Select when AV equipment will be connected. Image processing, menu
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 105
    Advanced Guide Menu Description Menu Description Power management duration > [System settings] > [Power management duration] Specify how long before the lamp is turned off or the projector enters
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 106
    Menu Description Motion blur reduction > [System settings] > [Motion blur reduction] Motion blur is blurring that occurs during video playback. Motion blur reduction can make this blurring less noticeable. Option Off On Function Motion blur reduction is not performed. Motion blur reduction is
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 107
    operation with a password, set a password, reset counters for lamp or air filter replacement, and access other settings and information. Advanced Guide Menu Description Password settings Disables the projector unless the correct password is entered. Option Function Off The projector can be
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 108
    Menu Description Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the buttons. The 4-digit password is entered from the left to right digits. When the final digit is entered, the password is automatically registered. Press
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 109
    drive. Check the version indicated before updating the firmware. Advanced Guide Menu Description • Firmware versions shown here are for illustration be possible to download updates. For details, contact the Canon Customer Support Center. Firmware updating takes a few minutes. During the update,
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 110
    H/V Screen aspect Zoom (WUX450ST) Keystone Professional settings Micro-digital image shift Registration Fan mode Vertical projection Screen color On screen Guide Show input status Overheat warning display Menu display time Lamp warning display Air filter warning display Split screen ID display Test
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 111
    Advanced Guide Menu Description Menu Description Main factory defaults System settings Submenu HDBaseT LAN LAN USB Audio in 1 HDBaseT Off Communication settings Serial communication Service port Wired network LAN port HDMI image input Computer HDBaseT image input Computer Submenu
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 112
    Menu Description Network settings Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 113
    Advanced Guide Menu Description Menu Description Wireless Networks • Projector Access Point (PJ AP) Mode The projector can be used as an access point for direct communication with
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 114
    projector's wired or wireless IP address is not the same as that of other computers on the network. To set a projector IP address, follow the instructions in "Completing Computer Settings" (P127) and use the web screen, or use projector TCP/IP settings. (P120, P124) 114
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 115
    Advanced Guide Menu Description Menu Description • When you connect the computer to the network for the first time, it is also necessary to perform settings on the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 116
    the Canon website for a list of countries and regions where use of the wireless LAN function permitted. Canon assumes no responsibility whatsoever for problems, etc., that may arise from use of the wireless LAN function in countries and regions other than those listed. ■ Model Number WUX500/WUX450ST
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 117
    in this section apply to wired and wireless network connections, setting a network password, and other aspects of networked projection. Advanced Guide Menu Description (When the input signal is Analog PC-1) Menu Function Network settings lock Lock network settings to prevent changes. Network
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 118
    Menu Description Network settings lock > [Network Settings] > [Network settings lock] You can lock/unlock the network settings so that they cannot be changed. Option Unlock Lock Function Cancels the lock and allows other network settings to be changed. The password must be entered in order to
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 119
    PC-free multi projection mode. • A message is displayed at the initial startup in PJ AP mode (P113) requesting that you check security key settings. Advanced Guide Menu Description 119
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 120
    Menu Description Detailed settings (wired) > [Network settings] > [Detailed settings (wired)] Display and manually change the wired IP address, gateway address, and other settings. Available only when wired networking is [On]. Menu IP address Gateway address MAC address DHCP
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 121
    ) - DHCP (P134) - IP address (P134) - Subnet mask (P134) - Default gateway (P134) • [NMPJ Password] (P136) • [Mail] (P137) • [Mail auth] (P138) • [SNMP] (P139) • [Projector info.] (P140) Advanced Guide Menu Description 121
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 122
    Network settings] > [Detailed settings (wireless)] Display and manually change the wireless IP address, gateway address, and 2 minutes, select [OK] on the screen. Connect in PIN mode. Following the instructions shown, enter the displayed 8-digit PIN code on the wireless base station (access point),
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 123
    Menu Menu Description Function Manually specify the projector's wireless settings. Advanced Guide Menu Description Submenu Mode Function Shows the wireless connection mode. (P113, P114) A list of available access point SSIDs is displayed. You can find available access
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 124
    Menu Description Menu DHCP Function Enable or disable wireless DHCP on the projector. Submenu Off On Function Disables the DHCP function. TCP/IP settings can be configured. Enables the DHCP function. Searches the DHCP server. It will no longer be possible to enter TCP/IP settings (IP address,
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 125
    Advanced Guide Menu Description Menu Description PJLink > [Network settings] > [PJLink] established by the Japan Business Machine and Information System Industries Association (JBMIA). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 126
    settings] > [Crestron RoomView] Crestron RoomView enables centralized management of multiple projectors over a network. Networked projectors can be remotely controlled to troubleshoot issues, check the useful life of lamps, or turn the projectors on or off. Specify whether to use Crestron RoomView
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 127
    Advanced Guide Menu Description Completing Computer Settings Menu Description Specifying an IP Address Instructions for setting a computer's wired or wireless IP address are as follows for each operating system. ■ Windows 10 1 Right-click the Start button (Windows logo) in
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 128
    Menu Description 5 For a wired connection, right-click [Ethernet], or for a wireless connection, right-click [Wi-Fi]. Next, click [Properties]. 6 In the [This connection uses the following items] list, select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties] button. Make a note of
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 129
    Advanced Guide Menu Description Menu Description ■ Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the System Preferences window, click [Network] to display the Network
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 130
    air filter unit Faulty power supply Unknown error * For details on downloading the Networked Multi-Projection (NMPJ) application, refer to the NMPJ user's manual. The projector's own default IP address is 192.168.254.254 for wired connections and 192.168.253.254 for wireless connections. If DHCP
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 131
    Advanced Guide Menu Description Menu Description 4 Enter the user name and password on the password input window, then click [OK]. The factory default user name is "root"
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 132
    Menu Description 2 Enter setting details in the fields shown (1), and then click [OK] (2). (1) (2) 3 A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the projector. Selecting [Wired], [Wireless], or [Password] in the menu will
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 133
    ). For confirmation, enter the same password that you entered in [New password]. Factory default setting root system system We recommend changing the default password. Advanced Guide Menu Description 133
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 134
    the projector's wired MAC address. Select whether to turn the DHCP function on or off for wired connections. The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from the server. [IP address] [Subnet mask] [Default gateway] Enter the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 135
    setting procedure, refer to "Network Setting" (P131). Advanced Guide Menu Description Item MAC address DHCP IP address Subnet mask function on or off for wireless connections. The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 136
    ). For confirmation, enter the same password as you entered in [Password]. For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user's manual. 136
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 137
    screen, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to "Network Setting" (P131). Advanced Guide Menu Description Item To: Cc: From: SMTP server IP address SMTP server port number SNTP server IP address Time zone Mail resend interval* Mail
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 138
    Menu Description Mail Authentication Settings [Mail auth] From [Mail auth] in the settings screen, you can configure the settings for authentication of mail that is sent when an error occurs. For the setting procedure, refer to "Network Setting" (P131). Item Mail authentication User name Password
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 139
    configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol). For the setting procedure, refer to "Network Setting" (P131). Advanced Guide Menu Description 139
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 140
    Menu Description Item SNMP Receive community Password Confirm password Explanation Factory default setting Select the SNMP function version. If OFF is selected, the SNMP function will be turned off and the other settings in this screen cannot be changed. OFF Enter the community name which will
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 141
    a network. For the setting procedure, refer to "Network Setting" (P131). For information about PJLink, refer to "What is PJLink?" (P125). Advanced Guide Menu Description Item PJLink PJLink authentication Password Confirm password Explanation Turn the PJLink function on or off. If OFF is selected
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 142
    when sending a test mail. Failed to connect to the POP3 server attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test mail failed due to a connection failure with the SMTP server or
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 143
    Advanced Guide Menu Description Menu Description Resetting Network Settings to the Default Settings 1 Perform steps 1 - 3 on "Displaying the Network Configuration Screen" (P129) to display the settings screen. 2 Click [Initialize]. 3 A confirmation window appears. Click [OK]. 143
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 144
    The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 145
    window, then click [OK]. The factory default user name is "root" and the password is "system". The projector control screen appears. Advanced Guide Menu Description The projector can be controlled from this screen. Item Projector name Comment Refresh Power Input Aspect Image mode Blank Mute Auto
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 146
    Menu Description Item Explanation Split screen Select the setting for split-screen mode and click [Apply] to switch to split-screen projection. (P79, P157) Split screen control Select the control rights setting for split-screen mode and click [Apply] to switch the side currently under control.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 147
    installed are displayed. (P140) System information ID System information. Normally this is not displayed. * The values are not displayed when network functions are [Off]. Advanced Guide Menu Description 147
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 148
    Menu Description Some values may not be displayed, depending on whether wired or wireless functions are enabled or disabled. ( : displayed, ×: not displayed) Item Wired/Wireless Off/Off On/Off On/On (Pj AP) Off/On (Pj AP) Off/On (Infra) IP address (wired) × × × IP address (wireless) × ×
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 149
    Advanced Guide Advanced Projection Advanced Projection Projecting Images on a USB Flash Drive JPEG images stored on a USB flash drive connected to the projector can be projected as
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 150
    Advanced Projection 3 Select a file to project. Motion blur reduction is not available when projecting JPEG files on a USB flash drive. (P106) 4 Switch to other images as needed. To switch to the previous image, press the [ ] button. To switch to the next image, press the [ ] button. To rotate
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 151
    Advanced Guide Advanced Projection Advanced Projection Description of USB File Browser If a USB flash memory is connected to the projector, the USB file browser appears. In the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 152
    Advanced Projection Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and projecting on the screen. ■ Selecting a Drive This step may not be necessary when a USB flash drive is connected directly to the projector's USB port. If a USB
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 153
    Advanced Guide Advanced Projection Advanced Projection Running a Slideshow of Data Saved in a USB Flash Memory Multiple images on a USB flash drive can be projected consecutively, with each
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 154
    Advanced Projection Using PC-Free Multi Projection A JPEG image on a USB flash drive can be divided among up to nine projectors and combined into a single, large image. When projectors are connected via a wired LAN, the projector that produces the image in the upper left is called the Primary
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 155
    Advanced Guide Advanced Projection Advanced Projection 3 Configure some projectors as Secondaries. Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Secondary]. Complete this setting on each Secondary
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 156
    Advanced Projection • [Destination projector setting] Specify Secondary projector IP addresses. • [Slideshow interval] Specify the slideshow interval (5 seconds to 10 minutes). • [Animation effect] Specify the transition to use for slideshows. 5 On the Primary projector, select [Input settings] > [
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 157
    Advanced Guide Advanced Projection Advanced Projection Split-Screen Display Two input images can be projected side by side. This is split-screen display. When you activate split-
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 158
    Advanced Projection • If you specify [LAN] or [USB] as an input signal, the screen width is evenly divided between the left and right areas. (P79) • When projection resumes from standby or after the lamp is momentarily turned off in split-screen mode, display reverts to single-image mode (showing
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 159
    Advanced Guide Advanced Projection Advanced Projection Projecting from Multiple Projectors at Once (Edge Blending) Overlapping edges of images from multiple projectors used together can be blended to make the overall image more seamless. ■ Basic Instructions Follow these steps when using two
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 160
    toward the center of the image) is called area "D." Normally, three areas are identified in the context of end markers: A, B, and C. In the following instructions, only area D is adjusted, and the widths of A, B, and C are left at the default value of 0. To prepare for adjustment, set [No signal
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 161
    brightness and colors of the blending area and area D match. Advanced Guide Advanced Projection Adjust [D-area base] to lighten the black level, and and C must be adjusted to suit these blending areas. In this example, instructions are given for adjusting area B. 1 In the [Install settings] menu,
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 162
    corner in the blending area can be aligned with the blending area of the reference projector. • First, complete [Side] adjustment as described in "Basic Instructions" (P159). • Sides set to an edge-blending width of 12 or more can be adjusted when [Keystone] is set to [Corner adjustment] and the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 163
    opposite side of the overlapping area, so that the screen as a whole is corrected. 5 Set the reference projector's edge-blending markers to [Off] (P159). Advanced Guide Advanced Projection 163
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 164
    164
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 165
    Other Information Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting 165
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 166
    Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Do not use adhesives, lubricants, oils, or alkaline detergents for maintenance of the projector. They could adhere to the cabinet
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 167
    Follow the procedure below when cleaning the air filter. 1 Turn the power of the projector off and pull out the power plug. 2 As you press the top and bottom of the air filter cover to release the lock, remove the cover. Maintenance 3 Open the filter cover and remove it. 4 Remove the air filter.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 168
    ] is set to [Off]. (P98) Reset the air filter counter manually. (P109) Replacing the Air Filter This projector uses the following air filter. Air filter part no.: RS-FL02 Contact the Canon Customer Support Center when purchasing a replacement air filter. Follow the procedure below when
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 169
    4 Remove the air filter. Maintenance Other Information Maintenance 5 Follow this procedure in reverse to install a new air filter. • Handle the air filter carefully. If damaged, the air filter will not work properly. • We recommend cleaning or replacing the air filter (Part No.: RS-FL02) when you
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 170
    after you turn it on, the lamp may be broken. In this case, never attempt to replace the lamp by yourself. Always request service from the Canon Customer Support Center. Additionally, with ceiling-mounted projectors, the lamp may fall out when you open the lamp cover or while you are attempting to
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 171
    Other Information Maintenance Maintenance • Be sure to use the specified lamp. • Contact the Canon Customer Support Center for further information. This can also be purchased from the Canon website. • Do not touch the inner glass surface when you replace the lamp.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 172
    Maintenance 4 Loosen the three screws securing the lamp unit. 5 Remove the lamp unit. 6 Follow this procedure in reverse to install a new lamp unit. 7 Turn on the power. Bring up the menu and select [System settings] > [Other settings] > [Lamp counter]. 8 Select [Reset] - [Yes] to reset the lamp
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 173
    • We recommend cleaning or replacing the air filter (part no.: RS-FL02) when you replace the lamp. • To order air filters, contact the Canon Customer Support Center. ■ If the Lamp Cover Comes Off Align the point of attachment on the lamp cover with the groove on the projector and gently push
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 174
    Product Specifications Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P60) and aspect (P62). Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 175
    Product Specifications ■ When projecting at the original aspect ratio on a 16:9 screen Original Aspect Ratio (16:10) 1920 x 1200 1440 x 900 1280 x 800 Screen aspect setting (P60) Aspect setting (P62) [Auto] Screen image (16:9) 1920 x 1080 1280 x 720 [16:9] [16:9 D. image shift] [16:9] [Auto
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 176
    Product Specifications ■ When projecting to fill a 16:10 screen Original Aspect Ratio (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 (4:3) 1600 x 1200 1400 x 1050 640 x 480 Screen aspect setting (P60) Aspect setting (P62) [16:10] [Auto] [16:10] [16:10] [16:10] ■
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 177
    Product Specifications ■ When projecting to fill a 4:3 screen Original Aspect Ratio (16:10) 1920 x 1200 1440 x 900 1280 x 800 Screen aspect setting (P60) Aspect setting (P62) [4:3] (16:9) [4:3] 1920 x 1080 [4:3 [4:3] 1280 x 720 D. image shift] (4:3) 1600 x 1200 1400 x 1050 640 x 480
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 178
    to switch pattern. A dialog box is shown during test pattern display that identifies the current test pattern and provides operating instructions. The following test patterns can be displayed. Use [ ] / [ ] to switch patterns Use [ ] / [ ] to switch option patterns (1) Color bars (2) Stairstep
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 179
    Signal Types This projector supports the following signal types. If your computer or AV equipment is compatible with any one of these signal types, the projector's Auto PC function selects
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 180
    .000 60.000 24.000 25.000 30.000 * The specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of higher than 162 MHz. * Use a computer cable in which all pins are connected. If the cable is
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 181
    length / F value 1.8x / 21.7 - 39.0 mm / f2.8 - / 8.8 mm / f2.7 Zooming / Focus adjustment Manual / Manual - / Manual Lens shift V: 0% to +60% (manual) H: ±10% (manual) V: 0% to +75% (manual) H: ±10% (manual) Light source, power consumption 260 W / 200 W (Lamp mode 260 W / 200 W (Lamp mode
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 182
    Product Specifications Model name WUX500 WUX450ST DVI-I terminal (29-pin DVI connector) Analog PC, Digital PC HDMI terminal HDMI (deep color only) ANALOG PC / COMPONENT terminal (mini D-sub 15-pin) Analog PC, Component Input terminal HDBaseT terminal (RJ-45) Networked multi-projection,
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 183
    control, remote control dry-cell batteries, power cord, lens cap, PC cable, Important Information, User's Manual (CD-ROM) and Warranty Card IEEE802.11b/g/n Wireless connectivity Supported channels 1 CH - 11 CH Frequency band 2.4 GHz *1 In full power lamp mode *2 Compliance with ISO21118
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 184
    Product Specifications ■ External View WUX500 Bolt holes (M6 x 4) for installation of ceiling attachment 33 mm (1.3") 301 mm (11.9") (5.7") 144.5 mm 144.5 mm 289 mm (11.3") 136 mm (5.4") 72 mm (2.8") 91.5 mm (3.6") 362 mm (14.3") (5.7") 118 mm (4.6") 337 mm (13.3") WUX450ST 370 mm (14
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 185
    Pin No. Signal 9 +5 V power 10 Ground (Vertical sync.) 11 Ground 12 DDC data 13 Horizontal sync. 14 Vertical sync. 15 DDC clock ■ Service Port (CONTROL) Pin assignment Pin No. Signal 1 OPEN 2 RxD 3 TxD 4 OPEN 5 GND 6 OPEN 7 Internal pull-up 8 OPEN 9 OPEN Communication format
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 186
    Product Specifications User commands Commands Power on Power supply Power off Power status acquisition HDMI Digital PC Analog PC-1 Analog PC-2 Input source Component LAN USB HDBaseT Input source acquisition Standard Presentation Photo/sRGB Dynamic Video Image Mode User 1 User 2 User 3 User
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 187
    Product Specifications Commands ASCII representation Sharpness Sharpness value setting SHARP= Sharpness acquisition GET=SHARP Contrast Contrast value setting CONT= Contrast acquisition GET=CONT Auto ASPECT=AUTO 4:3 ASPECT=4:3 Aspect 16:9 16:10
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 188
    Troubleshooting LED Indicator Details When there is a problem with the projector, the LED indicator the same warning occurs again, there may be a malfunction in the projector. Contact the Canon Customer Support Center. WARNING and Faulty lamp LAMP are lit. The lamp does not illuminate. If the lamp
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 189
    Troubleshooting LED indicator status WARNING (only) flashes 3 times repeatedly. Meaning Filter error Cause and countermeasure The air filter is not installed. Check whether or not the air filter is installed correctly. Contact the Canon Customer Support Center if the same warning occurs again.
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 190
    Troubleshooting BLANK function has been selected. No image is projected due to a problem with the computer. The external monitor output is not set on the model of notebook computer. For more detailed information, refer to the manual that came with your computer. Check whether the dual screen (
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 191
    Troubleshooting Cause Images on a USB flash drive cannot be projected. The LAN cable (shielded twisted pair) is not connected correctly. a normal image. Clean the lens. (P166) Adjust the tracking with the [Auto PC] or [Tracking] function. (P76, P77) Other Information Troubleshooting 191
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 192
    Troubleshooting Cause Video is blurred. Motion blur reduction is not available. The is clogged, clean or replace the air filter. (P166, P168) If the lamp has ruptured, follow the instructions in "Note the following precautions when replacing lamps that stop working. Failure to do so could result in
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 193
    after startup. Wait at least 40 seconds, and then try to connect again. (P129) Follow the instructions in "Network Setting" (P131 - P132), "Wireless LAN (Wi-Fi)" (P116), and "Detailed settings is still not possible, contact the Canon Customer Support Center. Other Information Troubleshooting 193
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 194
    Troubleshooting ■ You Cannot Operate the Remote Control Cause Batteries are not installed properly or they have run out. You are operating the remote control from the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 195
    Index Numerics 6-axis color adjust 87 A Adjusting keystone distortion 64 Air filter 168 Ambient light 85 AMX Device Discovery 126 Analog PC 55 ANALOG PC-1 / DVI-I terminal......... 35 ANALOG PC-2 / COMPONENT terminal 35 ASPECT 63 Aspect 62, 174 AUDIO IN terminal 35 AUDIO OUT terminal 35
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 196
    Once (Edge Blending 159 Projector on 101 Sharpness 84 Side control 32 Signal type 179 Slideshows 79, 81, 153 Split-screen display 157 Supported Signal Types 179 System settings 72, 99 T Test pattern 178 Tracking 77 True size (Aspect 62 Turning on external monitor output (preparing the
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 197
    • Option feet Part No.: RS-FT01 * Use the above materials to hang the projector from the ceiling. For details, refer to the assembly and installation manual provided with the ceiling attachment. 197
  • Canon REALiS LCOS WUX500 | WUX500 WUX450ST Users Manual - Page 198
    CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
Safety Instructions
Before Use
Basic Guide
Installation Procedure
Connection Procedure
Projection Procedure
Convenient Features
Advanced Guide
Using Menus
Menu Description
Advanced Projection
Other Information
Maintenance
Product Specifications
Troubleshooting
ENG
MULTIMEDIA PROJECTOR
User’s Manual