Canon REALiS WUX4000 Pro AV Multimedia Projector WUX4000 User's Manual
Canon REALiS WUX4000 Pro AV Manual
![]() |
View all Canon REALiS WUX4000 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS WUX4000 Pro AV manual content summary:
- Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual/ Installation Manual Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 2
Manual (Operation)/Installation Manual (Installation and Maintenance) (This Manual) This manual combines the user's manual and the installation manual for the WUX4000 Multimedia Projector. The user's manual by a qualified technician or Canon dealer. Read this manual thoroughly to make the most of - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 3
Quick Reference Guide This Quick Reference Guide will help you find functions that make full use of the projector and are useful for producing an attractive presentation, etc. Connecting the Projector Connecting to the Computer (P37 - P39) Connecting to AV Equipment (P40 - P42) Projecting an Image - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 4
Manual 2 Quick Reference Guide 3 Safety Instructions...10 Safety Precautions ...11 CAUTION ON HANGING FROM THE CEILING 11 ■ READ AND KEEP THIS OWNER'S MANUAL - P46 39 ■ Outputting Audio to Speakers 39 Connecting to AV Equipment 40 ■ Connecting to Digital Video Output Terminal (Digital - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 5
Table of Contents Table of Contents Starting Projection ...43 ■ When the Language Selection Screen Appears 44 ■ When the Password Input Screen Appears 44 ■ When "No signal" Appears 44 ■ When Notebook Computer Screen Does Not Appear 45 ■ Adjusting Image ...45 Changing Notebook Computer Screen - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 6
Table of Contents Setting Display Status 75 Selecting an Image Projection Mode 75 Selecting an Input Signal Type (Analog PC 76 Selecting an Input Signal Type (Component 76 Adjust Input Signal (Analog PC) Total dots 77 Adjust Input Signal (Analog PC) Tracking 77 Adjust Input Signal (Analog PC) - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 7
Remote Control Channel 98 Selecting a Display Language 99 Showing/Hiding the Guide Screen 99 Showing/Hiding the Input Status 100 Selecting the HDMI Input Projecting Distance 122 ■ Lens Shift Function ...124 Connecting to AV Equipment 126 ■ Connectable Equipment and Input Terminals 126 ■ Connection Terminal - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 8
Table of Contents Connecting to a Network 129 Preparing the Remote Control 130 Connection Methods ...130 Setting an IP Address...131 ■ Windows 7...131 ■ Windows Vista...132 ■ Windows XP ...133 ■ Mac OS X ...134 ■ Resetting the IP Address Setting of the Computer 134 Network Settings on the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 9
Contents Table of Contents Appendix 163 Appendix ...165 Troubleshooting ...166 LED Indicator Meanings ...166 Symptoms and Operate the Remote Control 170 Relationship between Aspect and Screen Aspect 171 Supported Signal Types 173 Product Specifications 174 ■ Projector ...174 ■ Remote control - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 10
, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 11
Safety Instructions Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 12
MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 13
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 14
Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets the contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) 14 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 15
Instructions Safety Instructions Federal Communication Commission Notice Multimedia Projector, Model: WUX4000 • Consult the dealer or an experienced instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 16
Safety Instructions Precautions for Use As this section contains important safety- bundled. • Do not use a damaged power cord. If your power cord is damaged, purchase a replacement from a Canon dealer. • Do not use any power cord other than the type that is included with this projector. • Be sure to - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 17
Safety Instructions Safety Instructions Warning Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so could result in a - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 18
Safety Instructions Warning Pay attention to the following points regarding installation could cause an electric shock or burn. If inspection, maintenance or repair is required, contact a Canon dealer. • Do not disassemble or modify the projector (including consumable parts) or the remote control. - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 19
Safety Instructions Safety Instructions Caution Precautions for Installation and Handling • Do not that periodic maintenance of the projector be performed. For details of maintenance costs, contact a Canon dealer. • When hanging the projector from a ceiling, put the projector down on the floor - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 20
to cool down sufficiently. Failure to do so could result in a burn or personal injury due to heat from the lamp or projector. • When an instruction to replace the lamp has been displayed (LAMP Indicator Displays (P31)), the possibility of the lamp breaking will increase. Replace the lamp with a new - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 21
Safety Instructions Safety Instructions For Safe Use Precautions for Carrying and Transporting Projector • This projector is a precision instrument. Do not the interior of the projector which could cause a malfunction. • If you need to transport the projector, contact a Canon dealer for advice. 21 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 22
Safety Instructions For Safe Use build up inside the projector and this could result in a malfunction. • Do not block the air intake or exhaust vents of the cooling fan. Doing so could cause heat 2300 m: Contact a Canon dealer if you intend to use this projector at altitudes of 2300 m or higher. 22 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 23
Before Use 23 Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 24
/ Installation Manual (CD-ROM) Warranty Card Important Information ■Installing Remote Control Batteries 1 2 Open the battery com- Insert batteries. partment lid. Insert 2 new AAA bat- Slide the lid while teries in the compart- pressing it down. ment with the + and - poles positioned - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 25
■Remote Control Operating Range Point the remote control at the infrared remote receiver on the front or rear of the projector whenever pressing any button. (26.3') (26.3') • Use the remote control within a distance of approximately 8 m (26.3') from the projector. • Use the remote control within - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 26
Air filter (P157) Anti-theft lock hole An anti-theft wire cable (not included) can be connected. Do not block the air intake. Doing so may cause a malfunction. ■Rear Side Exhaust vent Do not block the air exhaust. Doing so may cause a malfunction. Lamp cover Infrared remote receiver (P25) 26 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 27
on the ceiling. Depending on the installation environment, an extension pipe (part No.: RS-CL08 or RS-CL09) may also be required. Contact a Canon dealer where you purchased the projector for more detailed information. • Make sure to use the optional ceiling attachment. • You should never install the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 28
tion nearer. ASPECT button (P55) Changes the aspect ratio mode. D.SHIFT/KEYSTONE button (P59) Corrects keystone distortion buttons: For keystone adjustment. Press D.SHIFT/KEYSTONE to correct keystone distortion. • Moves the image up, down, left, or right when [16:9 D. image shift] or [4:3 D. image - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 29
and performs remote control channel settings. (P98) VOL button (P67) P-TIMER button (P69) Displays the time elapsed since this button was pressed. Adjusts the sound volume. [+] button: Increases the volume. [+-] button: Decreases the volume. MUTE button (P67) BLANK button (P66) Mutes the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 30
button (P43, P64) Turns the projector on or off. (3) MENU button (P72) Displays a menu on the screen. (4) LENS button Each time the button is pressed, the screen changes to focus adjustment (P57), zoom (image size) adjustment (P56), or lens shift (image position) adjustment (P58). To adjust, use the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 31
Before Use Part Names ■LED Indicator Displays The illumination status of the LED indicators indicates the operating status of the projector. Status Power is not connected. POWER ON (green) : Off : Lit LED indicator STAND BY WARN- LAMP (red) ING (red) (orange) : Flashing TEMP (red) Ready to - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 32
Port (CONTROL) This terminal is used by servicing technicians. It is not used during ordinary use. (6)AUDIO IN Terminal (AUDIO IN) (P37, P38, P41) Receives the audio input corresponding to 2 image input systems other than HDMI IN. The internal speaker outputs the audio signal for the selected - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 33
MULTIMEDIA PROJECTOR Operation 33 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 34
34 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 35
Projecting an Image 35 Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 36
Steps for Connecting the Projector and Projecting an Image Installation work will be performed by a qualified technician or Canon dealer where the projector was purchased. Connecting the Projector to Equipment (P126) Starting Projection (P43) Do you want to project an image from a notebook - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 37
Operation Projecting an Image Connecting the Projector Connecting the Projector to a Computer Connect the projector to the computer. Before connecting the cables, turn off both the projector and computer. A digital connection (P38) is recommended when projecting a WUXGA or UXGA image in high - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 38
Connecting the Projector BNC cable (Input signal type: [Analog PC] - P46) Computer Mini D-sub 15-pin BNC terminal converter cable (not included) Mini D-sub 15-pin BNC terminal converter cable (not included) Monitor output terminal (mini D-sub 15-pin) BNC cable (not included) When inputting - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 39
Operation Projecting an Image Connecting the Projector ■HDMI cable (Input signal type: [HDMI] - P46) Computer Projector HDMI cable (not included) To HDMI IN Digital image output terminal (HDMI terminal) * When an HDMI cable is connected, digital sound is also connected at the same time. ■ - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 40
equipment. Before connecting the cables, turn off both the projector and AV equipment. The description provided here is one example. For more detailed information, refer to the manual for the connected AV equipment. ■Connecting to Digital Video Output Terminal (Digital Connection) HDMI cable (Input - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 41
the Projector ■Connecting to Analog Video Output Terminal (Analog Connection) Component cable (Input signal type: [Component] - P46) A component video signal from the AV equipment can be inputted into the projector by connecting the component cable to the ANALOG PC/COMPONENT IN terminal of the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 42
Connecting the Projector ■Outputting Audio to Speakers It is possible to output audio from the projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Audio cable (not included) Mini jack Audio input terminal (AUDIO IN) Use an audio - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 43
Projection 1 Check the connection between the projector and the computer or AV equipment. (P40 - P42) 2 Connect the power cord and it off. • To save power, unplug the power cord when not in use. 3 Press the POWER button. The [POWER] indicator flashes green, and then stops flashing and remains lit - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 44
the OK button. You can change the language from the menu at a later time. (P99) If the language selection screen is out of focus, press the FOCUS button to perform focus adjustment. Remote control Projector An item highlighted in orange will be selected. ■When the Password Input Screen Appears If - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 45
icon while holding down the [Fn] key. While pushing key Press a key such as or . • The function key you use and the method used to turn on the external monitor output vary depending on the model. For details, see the instructions for your notebook computer. • With Windows 7, you can turn on - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 46
when multiple computers or multiple sets of AV equipment are connected. Skip this step if you have not changed the input signal since the last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 47
an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to display the window shown on the lower projection. 2 You can switch the available input signal types by pressing the INPUT button. • You can select the target input signal with Only the input signals displayed in - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 48
Adjusting the Image Setting the Display Resolution of the Computer Based on the performance of the projector (resolution: 1920 x 1200 pixels), set the display resolution of the computer to "1920 x 1200 pixels" or the resolution closest to the output signal resolution of the computer. (P173) ■Windows - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 49
the computer from the [Resolutions] list. 4 Close the [System Preferences] window. AUTO PC If the image display is shifted or adjusted. ■Performing the Auto PC Function Press the AUTO PC button to perform projector For the signal types supported by the projector, see the table on page 173. 49 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 50
the correct aspect ratio for the screen which is used. Perform the following steps to select the aspect ratio of the projected image. 1 Press the MENU button to display a menu window. Remote control Projector 2 Use the [ ] / [ ] buttons to select the [Display settings] tab. Remote control - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 51
the image to the left or right while projecting the image horizontally. For the details on how to move the image, refer to page 53. 5 Press the OK button to confirm your setting and then - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 52
Adjusting the Image Moving Image with 16:9 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button when [16:9 D. image shift] is selected as the screen aspect in Projector [ ] button Moves image up [ ] button Moves image down 3 When image shift adjustment has been completed, press the OK button. 52 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 53
Adjusting the Image Moving Image with 4:3 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button when [4:3 D. image shift] is Moves the image right 3 When image shift adjustment has been completed, press the OK button. Resetting the Image Shift Perform the following steps to reset the image - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 54
Adjusting the Image ■Selecting Aspect Ratio Select the aspect ratio of projected image based on the input signal type, aspect ratio of the screen and resolution. For more details, refer to page 171 "Relationship between Aspect and Screen Aspect". Types of Aspect Ratios Auto The image is projected at - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 55
the ASPECT button on the remote control and select an appropriate aspect ratio. Press the ASPECT button to change the aspect ratio type. For more details on the aspect ratios, refer to page 171 "Relationship between Aspect and Screen - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 56
too small to adjust it with the zoom function. (P123) 1 Press either the ZOOM button on the remote controller or the LENS button on display the window shown at lower right. Remote control Projector Push twice 2 Press the pointer buttons to adjust the image size. Remote control Projector [ ] - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 57
remote control or the LENS button on the projector in order to display the window shown on the lower right. Remote control Projector 2 Press the pointer buttons to adjust the focus. Remote control Projector [ ] / [ ] buttons Move the focus position farther away [ ] / [ ] buttons Move the focus - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 58
To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the remote control or the LENS button on top edges. With the Short Fixed Lens, the areas are at the four corners. 1 Press either the LENS-SHIFT button on the remote control or the LENS button on the projector 3 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 59
lens shift function is not returned when the power is turned off. To return it to its original position, perform reset. During screen position adjustment, press and hold the LENS-SHIFT button on the remote control or the LENS button on the projector to display the [Lens shift Reset] window. The - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 60
the D.SHIFT/KEYSTONE button to display the window shown on the lower right. Remote control 2 Press the pointer buttons to adjust. Remote control Projector [ ] button Reduces the length of the the length of the right edge 3 When the keystone distortion has been corrected, press the OK button. 60 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 61
Projecting an Image Adjusting the Image ■Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the window, select [OK] with the [ ] button, and then press the OK button. 61 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 62
Selecting an Image Mode You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. (P86) ■Image Modes The image modes which can be selected vary somewhat - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 63
IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) Remote control You can also select any image mode from the [Image mode] menu. ( - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 64
• You cannot turn the projector on while the cooling process is in operation. • If you want to continue projecting without turning off the power, press a button other than POWER, or else wait until the confirmation message disappears. • After turning off the projector, wait at least 5 minutes before - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 65
Useful Functions Available During a Presentation Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 66
You want to perform a computer operation which is irrelevant to the proceedings of the presentation. • You want to stop a moving image. Remote control Press the image. Press the image. button to black out the button again to show the • You can set the screen state while blacking out the image on - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 67
the computer if the volume level is too low. • You can also adjust the volume level of the speakers connected via the audio output terminal. Press the function. button again to cancel the mute • You can also mute the sound of the speakers connected via the audio output terminal. 67 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 68
in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the button. A part of the image is enlarged each time the button is pressed. Remote control You can move the enlarged area by using the buttons. Remote control Projector You can - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 69
a Presentation Showing the Elapsed Time Useful when: • You want to manage the timing of the presentation. Operation Useful Functions Available During a Presentation Press the button to start counting. • The elapsed time is displayed on the lower right corner of the screen. • Time is counted up to - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 70
70 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 71
Setting Functions from Menus Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 71 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 72
to set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into 5 tabs as shown below. [Display settings] tab (P75) [System settings] tab (P96) You can set the operation of the projector. You can set the type of signal or the method of projection of the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 73
How to Use Menus ■Basic Operation of Menu 1 Press the [MENU] button to display the menu window. Remote control Projector 2 Use the [ ] / [ ] buttons to select a tab. Remote control Projector • If the tab position is - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 74
the setting. Selecting from a different screen (1) Example: Menu position 1. Press the OK button to display a different screen. 2. Then follow the instruction on the screen. Selecting from a different screen (2) Example: Tracking 1. Press the OK button to display a different screen. 2. Use the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 75
] for the input signal. • This mode is also available when you select [HDMI (480p, 576p, 720p, 1080i, 1080p)] and [Component (480p, 576p, 720p, 1080i, 1080p)]. Press the OK button to accept your setting and then - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 76
of the computer. • For the signal types supported by the projector, see the table on page 173. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. • Refer to the User's Manual of the AV equip- ment connected to the projector to confirm - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 77
the image distorts or flickers. Display settings Input signal settings Tracking Use [ ] / [ ] to select a value. When you have completed the adjustment, press the MENU button. • Perform this adjustment if the [AUTO PC] function (P49) cannot adjust the projected image correctly. Use [ ] / [ ] to - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 78
moves to the left. Use [ ] / [ ] to select a value. As the value increases, the screen moves upward. When you have completed the adjustment, press the MENU button. • Perform this adjustment if the [AUTO PC] function (P49) cannot adjust the projected image correctly. When you have completed the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 79
pixels Use [ ] / [ ] to select a value. Use [ ] / [ ] to select a value. Operation Setting Functions from Menus When you have completed the adjustment, press the MENU button. • Perform this adjustment if the [AUTO PC] function (P49) cannot adjust the projected image correctly. When you have - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 80
press the MENU button. • [Auto] is the factory default. • You can select this only when the type of sig- nal sent from AV equipment is RGB. • The signal level is selected automatically in [Auto] mode. (Some AV equipment may not support refer to the User's Manual of the AV equipment connected to the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 81
the peripheral sections of images may be cut out depending on the resolution of the signal. In such a case, select [Off]. Press the OK button to accept your setting and then press the MENU button. • The factory defaults settings are [On] when [HDMI In] is set for [Auto] and [Off] when it - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 82
. Display settings Screen color Move the menu to the desired position with the buttons. When the menu has been moved to the desired position, press the OK or MENU button. Normal Greenboard Adjust Select this if a standard type of projection screen is used. The images are projected in a light - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 83
the OK button to accept your setting and then press the MENU button. • [None] is the factory default. Rear ceiling mounted projection • To hang the projector from the ceiling, use the optional bracket. Contact a Canon dealer where you purchased the projector for more detailed information. • If - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 84
when blank] HDMI Digital PC Component Analog PC You can display a black or blue screen and temporarily blank out the projected image by pressing the BLANK button on the remote control. Display settings User screen settings Screen when blank Black Blue The screen is all black. The screen - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 85
logo Projects an input signal immediately after turning on the projector. Displays the Canon logo that was registered in advance at the factory. Press the OK button to accept your setting and then press the MENU button. • [Canon logo] is the factory default. 16:10 16:9 4:3 16:9 D. image shift - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 86
sRGB This mode conforms to sRGB standards. It is suitable for pro- jecting pictures images taken with an sRGB-compatible digital cam- era Stored settings can be selected as an image mode. Press the OK button to accept your setting and then press the MENU button. • [Standard] is the factory - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 87
is a computer (ANALOG PC, DIGITAL PC or HDMI (when [HDMI In] is [Computer]) and when AV equipment is connected (COMPONENT, HDMI (when [HDMI In] is [Auto])). As a result, it is possible Operation Setting Functions from Menus When the desired save destination is selected, press the OK button. 87 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 88
of the image on the projected image. [ ] Decreases the contrast of an image. The image becomes less vivid. When you have completed the adjustment, press the MENU button. • The adjustment you have made is stored as adjusted values for the input signals and image mode of the current projection. 88 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 89
remote control. Image adjustment Gamma [ ] Increases the sharpness of an image. [ ] Decreases the sharpness of an image. When you have completed the adjustment, press the MENU button. • The adjustment you have made is stored as adjusted values for the input signals and image mode of the current - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 90
of Offset dark portions of each color. [ ] Increases the color reproducibility. [ ] Decreases the color reproducibility. When you have completed the adjustment, press the MENU button. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 91
. Examples of Ambient Light Settings Level Example Location L Projection room, bar M Photo studio, gallery H Conference room, lecture room Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • [Ambient light] can be set only in the fol- lowing - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 92
button to accept your setting and then press the MENU button. • The factory default settings are [Off] when the connected equipment is a Computer (ANALOG PC, DIGITAL PC, HDMI (when [HDMI In] is [Computer])) and [Weak] when the connected equipment is AV equipment (COMPONENT, HDMI (when [HDMI In] is - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 93
. If you select [Adjust], the previous setting of 6-axis color adjustment becomes active again. Enables 6-axis color adjustment. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • The adjustment you have made is stored as adjusted values - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 94
settings of the other are overwritten. Image adjustment Advanced adjustment buttons to adjust the position of the point. When you have completed the adjustment, press the OK button. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 95
Reset Normal Quiet Projects an image at the normal brightness level. Reduces the lamp brightness and cooling fan noise. Press the OK button to accept your setting and then press the MENU button. • [Normal] is the factory default. • The adjustment you have made is stored as adjusted values for - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 96
in order to save power when the projector is not in use. System settings Power management mode Skip the POWER Button Operation [Direct power on] on the projector by connecting the power cable without pressing the POWER button. System settings Direct power on Off Standby Exit Disables the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 97
prevent its operation from either the side control or remote control. System settings Key lock Operation Setting Functions from Menus Off Disables the beep. On Enables the beep. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default. • The beep - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 98
different channel to each remote control so that each operates independently. System settings Remote control Selecting a Channel on the Remote control You controls set to any channel can be used. Press the OK button to accept your setting and then press the MENU button. • The factory default is - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 99
Analog PC You can select whether to show or hide the guide screen which explains operations. System settings Guide Operation Setting Functions from Menus Use the buttons to select the menu language, then press the OK button. English German French Italian Spanish Portuguese Swedish Russian - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 100
System settings HDMI In Off The input status is not displayed. On The input status is displayed. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default. Auto Computer Select when AV - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 101
the projector unless the correct password is entered. System settings Other settings Password settings Setting Various Functions To the password from the remote control, in standby state press the MENU button 3 times, then press the POWER button. Operation Setting Functions from Menus Off - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 102
settings] - [Lens Ctrl Lock] HDMI Digital PC Component Analog PC You can lock lens-related button operations. System settings Other settings Lens Ctrl Lock Press the OK button after selecting [Register password], and the following screen for registering a password appears. Off Focus, zoom - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 103
extend the menu display time from the normal setting of 30 seconds to 3 minutes. System settings Other settings Menu display time Operation Setting Functions from Menus Select [Lens shift Reset] and press the OK button. The following screen for confirmation appears. Use the [ ] / [ ] buttons to - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 104
has increased and is approaching the overheat temperature. System settings Other settings Overheat Warning Display Reducing Flickering [ On The [High temperature warning] icon is displayed. Press the OK button to accept your setting and then press the MENU button. When [On] is set, the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 105
screen is projected for approximately 20 seconds. • To cancel deflicker, press the POWER button. Resetting the Lamp Counter [Other settings] - reset the lamp counter that indicates the time for lamp replacement. System settings Other settings Lamp counter Do not reset the lamp counter except - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 106
Setting Various Functions Over 3,000 hours Displayed as a green, yellow and red bar. Select [OK] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button. ■ About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 107
settings to the factory defaults. System settings Other settings Factory defaults Setting Various Functions Operation Setting Functions from Menus Select [Factory defaults] and press the OK button. The following screen for confirmation appears. OK Settings are reset to default. Cancel - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 108
Item Model name Input signal Firmware Serial No. IP address* Gateway address* E-mail sender address* E-mail recipient address* Projector name* Location* System information ID Meaning Model name of this projector Details of the input signal currently selected Information such as the signal type - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 109
MULTIMEDIA PROJECTOR Installation and Maintenance Do not attempt installation yourself. Be sure to request installation from a qualified technician or Canon dealer. 109 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 110
110 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 111
Installation 111 Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 112
so may damage the projector. Installation Precautions Be sure to read "Safety Instructions" on page 10 - 22. Pay attention to the following when installing • Do not block the cooling fan intake or exhaust vent. If the intake or exhaust vent is blocked, heat may contact your Canon dealer. 112 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 113
quality. ■ Install at a Sufficient Distance from Walls and Other Obstructions • If the air intake or Air intake vent exhaust vent is blocked, heat will accumulate inside the projector, possibly resulting in a Exhaust vent fire, shortening the projector lifetime, and Warmed airflow causing - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 114
Installation Precautions ■When using mounted on the ceiling When the projector is used mounted on the ceiling or installed in a high location, it is necessary to periodically clean the air intake and exhaust vents, and the area around the air filter. If dust accumulates in the intake or exhaust - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 115
Installation Procedure Selecting the Projection Method and Installation Location (P116) Installing/Removing the Lens Unit (P117) Setting Up the Projector (P122) Connecting to AV Equipment (P126) Selecting an Input Signal (P46) Adjusting the Image (P48) Connecting to a Network (P129) 115 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 116
Selecting the Projection Method and Installation Location ■Ceiling Mounting or Rear Projection You can mount the projector on the ceiling (ceiling mounting) with it turned upside down or place it behind the screen (rear projection) if you use a translucent screen. Ceiling Mounting Rear Projection - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 117
may cause an accident or personal injury. • Do not attempt to install or remove the lens unit yourself. Be sure to request this service from a qualified technician or Canon dealer. • When installing and removing the lens unit, be sure not to touch the surface of the lens with your hands or scratch - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 118
Installing/Removing the Lens Unit 2 Loosen the cosmetic panel screw, then slide the cosmetic panel toward the rear to remove it. The cosmetic panel screw is attached to the cosmetic panel and designed to prevent it from falling off. 3 In order to prevent damage, close the lamp cover and temporarily - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 119
Installation and Maintenance Installation Installing/Removing the Lens Unit 5 Then turn the projector back over and remove the sleeve. 6 Referring the following illustration, insert the lens connector of the lens unit into the front right side of the projector slowly until it contacts the end. At - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 120
Installing/Removing the Lens Unit 8 Insert the projector lens cable into the connector until a click sound is heard. 9 Return the sleeve, cosmetic panel, and lamp cover to their original conditions. When the power is first turned on after the lens unit is replaced, the initialization operation will - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 121
the Lens Unit" (P117 - P119) and remove the sleeve. 2 Disconnect the lens cable from the lens connector. When pulling out (disconnecting) the lens cable, press the buttons on both sides of the lens cable connector while pulling out the cable. 3 Fix the lens cable as shown in the illustration and - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 122
Setting Up the Projector ■Positioning the Projector in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projection. • The screen must not be exposed to direct sunlight or light from lighting equipment. - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 123
Installation and Maintenance Installation Setting Up the Projector Lens unit Diagonal Image size (cm) Projection distance Distance from optical when axis when projection is 16:10 (diagonal) 16:10 16:9 4:3 Zoom Zoom Maximum Minimum perpendicular to screen* (cm) Width Height Width - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 124
Setting Up the Projector ■Lens Shift Function The projector includes a lens shift function. Operation of the buttons slides the lens up, down, left, and right, moving the image position. For the function operations, refer to "Adjusting the Image Position" (P58). The amount of lens shift is indicated - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 125
Setting Up the Projector ˃ Moves right by up to approximately 10% of the image width. Installation and Maintenance Installation At maximum rightward lens shift Area where lens movement is not possible With the Standard Zoom Lens and Long Zoom Lens, when the shift exceeds 44% in the upward - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 126
(P40) Digital video camera* (P40) AV equipment (P41) DVI-D IN terminal can only be used to connect to a PC. Computer (P39) * Select playback mode before connecting. LAN terminal Network (P130) Service port (not normally used) AUDIO IN terminal AUDIO OUT terminal Audio signal for each - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 127
Installation and Maintenance Installation Connecting to AV Equipment ■Connection Terminal and Connection Cable Input signal HDMI Input terminal HDMI IN Types of connection cables HDMI cable (not included) Digital PC DVI-D IN - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 128
128 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 129
Connecting to a Network Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 129 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 130
IP address is not overlapped with other computers that are on the same LAN. When you set the IP address of the projector, follow the instruction in "Configuring the Network from the Computer" (P140) on the web screen or refer to "TCP/IP Setting" (P139). • When you connect the computer to - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 131
Preparing the Remote Control Setting an IP Address Following is an explanation of how to set the PC IP address for each operating system. ■Windows 7 1 From the PC [Start] menu, select [Control Panel]. 2 Click on [Network and Internet Connections], then click on [View network status and tasks - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 132
Preparing the Remote Control ■Windows Vista 1 From the PC [Start] menu, select [Control Panel]. 2 Click on [View network status and tasks]. 3 From the menu on the left side of the window, click on [Manage network connections]. 4 Right-click [Local Area Connection], and open [Properties]. 5 Select [ - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 133
Installation and Maintenance Connecting to a Network Preparing the Remote Control ■Windows XP 1 From the PC [Start] menu, select [Control Panel]. 2 Select [Network and Internet Connections] and open [Network Connections]. 3 Right-click [Local Area Connection], and open [Properties]. 4 Select [ - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 134
Preparing the Remote Control ■Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the System Preferences window, click [Network] to display the Network preference window. 3 Select [Built-in Ethernet] and click the [TCP/IP] tab. Take notes of the original - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 135
, the window shown below appears. Use the buttons to enter the 4-digit password. Lock Lock the settings. After the OK button is pressed to confirm and the MENU button is pressed to close the window, the lock is re-engaged. If you change the network settings, be sure to continue operating without - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 136
network settings. Network Setting Network Password setting Off Disables the network function. On Enables the network function. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. Off A network password is not used. On A network password - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 137
to accept your setting and then press the MENU button. • [On] is the factory default. • This projector conforms to Class 1 as defined in the PJLink standards of the JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands that are defined by - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 138
for users and expand the use of projectors through early systemization for network monitoring and control of projectors, which will IP setting items (IP address, subnet mask, gateway address). Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 139
and gateway address in the same way. Finally, select [Enter]. When [Network setting initialization] is selected, the window shown below appears. Select [YES] then press the OK button. • The factory defaults are shown below. IP address 192.168.254.254 Subnet mask 255.255.255.0 Gateway address - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 140
. 2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The password input screen appears. The factory default IP address is "192.168.254 user name is "root" and the password is "system". The projector web screen appears in the web browser. 140 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 141
Configuring the Network From the Computer The following information is displayed. Projector name Location MAC address IP address Power Status Lamp Time Normal Mode Lamp Time Quiet Mode Lamp Time Converted Filter Time Alert The name of the projector on the network The location of projector - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 142
Configuring the Network From the Computer 5 Select the function to set from the menu (1), then enter the setting in the displayed field (2) and click [OK] (3). (1) (2) (3) 6 A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 143
Installation and Maintenance Connecting to a Network Configuring the Network From the Computer ■Resetting to Factory Defaults 1 Perform steps 1 - 3 of "Displaying and Configuring the Network Configuration Screen" (P140) to display the setting window. 2 Click [Initialize]. 3 A confirmation window - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 144
as shown below. Input error Error Password setting error Invalid SMTP System failed to connect SMTP server. System failed to connect POP3 server. System doesn't support this auth type. System failed to authenticate. The system failed to send the test mail. Save Failed Meaning A setting outside - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 145
symbols (4 -15 characters). When logging into the web screen, system enter the password in 1-byte alphanumeric characters and symbols (4 -15 characters). For confirmation, enter the same system password that you entered in [New password]. Select whether to turn - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 146
the range of 0 - 255 using 1-byte numbers. Select whether to turn the error mail sending function on or off. Factory default setting MailUserAccount [email protected] 0.0.0.0 25 0.0.0.0 (GMT) Dublin, Lisbon, London 10 3 OFF 146 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 147
Setting Up the Network ■Mail Authentication Settings [Mail auth] From [Mail auth] in the settings window, you can configure the settings for authentication of mail that is sent when an error occurs. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" ( - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 148
(P146) is displayed. The sender name which was set from [Mail] in the settings window (P146) is displayed. The predetermined mail title "Canon Projector test" is displayed. ■SNMP Settings [SNMP] From [SNMP] in the settings window, you can configure the settings related to control of projectors - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 149
Connecting to a Network Item Projector name Location Explanation Factory default setting Enter the projector name in 1-byte alphanu- WUX4000 meric characters and symbols (1 - 63 char- acters). Enter the projector installation location in 1- byte alphanumeric characters and - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 150
PJLink authentication password in 1-byte alphanumeric characters (1 - 32 characters). For confirmation, enter the same password that you entered in [Password]. Factory default setting ON ON system system 150 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 151
2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The password input screen appears. The factory default IP address is "192.168 and the password is "system". 4 The projector web screen appears in the web browser. Click [Projector control]. 151 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 152
Controlling the Projector from a Computer 5 The projector control screen appears. The projector can be controlled from this screen. Item Projector name IP address Refresh Power Input Aspect Image mode Blank Mute Auto PC Information Explanation The name of the connected projector is displayed. ( - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 153
The cooling fan or another component may be defective. Contact your Canon dealer. Faulty power supply The voltage of part of the power supply is abnormally high or any other problem has occurred in the power supply. Contact your dealer. Faulty lens connector The lens cable is not connected to the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 154
154 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 155
Maintenance 155 Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 156
cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 157
frame. 4 Install a new air filter into the frame. First insert the air filter tab into the groove on the handle side of the frame, then press the air filter into the frame. Installation and Maintenance Maintenance 157 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 158
your Canon dealer. • Replacement air filter part No.: RS-FL01 Cleaning the Air Filter The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged with dust, the projector may be damaged since it will block When you press the POWER - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 159
OK and POWER buttons are available while this screen is displayed. • When you press the POWER button, "Push POWER button again to turn off power." message POWER button is available while this screen is displayed. • When you press the POWER button, "Push POWER button again to turn off power." - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 160
correctly since it may break during use if it has been scratched or subjected to impact. If the lamp breaks, contact your Canon dealer and follow the instructions in "Precautions on the lamp" (P19) and "Lamp handling precautions" (P20). • When replacing the lamp, do not remove any screws other than - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 161
unit and secure it with the 3 screws. 5 Close the lamp cover and tighten the screws. 6 Turn on the power. Bring up the menu and select [System settings] - [Other settings] - [Lamp counter]. 161 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 162
Replacing the Lamp 7 Select [Reset] - [OK] to reset the lamp counter. 162 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 163
MULTIMEDIA PROJECTOR Appendix 163 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 164
164 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 165
Appendix 165 Appendix Installation and Maintenance Operation Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 166
Troubleshooting LED Indicator Meanings When there is a problem with the projector, the LED indicator on intake or exhaust vent is blocked, remove the obstacle. If the same warning occurs again, there may be a malfunction in the projector. Contact your Canon dealer. WARNING and Faulty lamp LAMP - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 167
Troubleshooting LED indicator status WARNING flashes 3 times. Meaning Filter error Countermeasure The air filter is not installed. Check whether or not the air filter is installed correctly. Contact your Canon dealer blocking the air intake or exhaust vent and contact your Canon dealer AV press the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 168
Troubleshooting Cause The BLANK function has been selected. No image is projected due to a problem with the computer. The external monitor output is not set on the notebook computer correctly. The displayed image is not the same as that displayed on the computer. Countermeasure Press 's Manual that - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 169
Troubleshooting ■The Projected Image Is Blurred Cause Countermeasure The image is are lit.) Wait until the projector temperature drops, then make sure that the intake and exhaust vents are not blocked and turn on the projector. (P26, P27, P43) Check whether the air filter is clogged with dust. - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 170
is between 5°C and 35°C. (P22) If you use the projector at 2300 m or higher above sea level, contact your Canon dealer. The projector may be damaged. Contact your Canon dealer. ■You Cannot Operate the Remote Control Cause Batteries are not installed properly or they have run out. You are operating - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 171
Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P50) and aspect (P54). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type. - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 172
Relationship between Aspect and Screen Aspect Using Screen Screen aspect ratio setting PC Resolution of screen WUXGA 16:10 WSXGA+, WXGA+ 16:10 WXGA [4:3] [4:3 D. image shift] UXGA 4:3 SXGA+, XGA, SVGA, VGA 4:3 SXGA 5:4 Purpose of projection Aspect setting Project an image in the - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 173
Signal Types This projector supports the following signal types. If your computer or AV equipment is compatible with specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of 162 MHz or higher. * Use a - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 174
■ Projector Model name Display system Optical system Type WUX4000 RGB liquid crystal system Color separation by dichroic mirror/ control dry-cell batteries, power cord, PC connection cable, User's Manual / Installation Manual, warranty certificate *1 When standard zoom lens is used * 99.99 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 175
Product Specifications ■Specification of Each Lens Unit (Option) Name Standard Zoom Lens Long Zoom Lens Model number RS-IL01ST RS-IL02LZ External View Short Fixed Lens RS-IL03WF Focal length F number Projection distance Lens shift Vertical Horizontal Width Height Length Weight Zoom ratio - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 176
Product Specifications ■External View 9911mmmm (3.5'') 115500mmmm (5.9'') 92 mm 92(3m.6m'') 43403m0mmm(16.9'') 38308m0mmm(15.0'') Bolt holes (M4 x 6) for installation of ceiling attachment 12812m8mm(m5.0'') 2342.354m.5mm(m9.2'') 53 mm 5(32m.1m'') 21221m2mm(m8.4'') (6.1'') 11441.1.55mmmm - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 177
■Service Port (CONTROL) Pin assignment Product Specifications Pin No. 1 2 3 4 5 6 7 8 9 Signal OPEN RxD TxD OPEN GND OPEN OPEN OPEN OPEN Communication format Communication mode : RS-232-C, asynchronous, - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 178
Product Specifications Commands ASCII representation Image mode USER 1 IMAGE=USER_1 USER 2 USER 3 IMAGE=USER_2 IMAGE=USER_3 USER 4 IMAGE=USER_4 Image mode acquisition Brightness Brightness acquisition Sharpness Sharpness acquisition Contrast Contrast acquisition Aspect USER - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 179
Product Specifications 179 Appendix Other Information - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 180
IN Terminal 32 Dynamic gamma 92 F Factory defaults 107 FOCUS 57 FREEZE 66 G Guide 99 H HDMI 39, 40, 46, 127 HDMI color space 80 HDMI IN 108 INPUT 47 Input signal select 46, 76 Input Terminal 32 Connecting to AV Equipment 40 Connection to Computer 37 K Key lock 97 Keystone 59 L - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 181
Image Quality 86 Setting a network password 136 Setting Display Status 75 Setting Various Functions 96 Sharpness 89 Side control 30 Signal type 173 System settings menu 72 T TCP/IP settings 139 Total dots 77 Tracking 77 True size (Aspect 54 Turning on external monitor output (preparing - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 182
from the ceiling. For details, refer to the assembly and installation manual provided with the ceiling attachment RS-CL11. • Installing/Removing the Lens replacement of the lens unit, contact a qualified technician or Canon dealer for your safety. Do not attempt installation and replacement of - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 183
Rear, Ceiling mounted User screen settings P76 No signal screen Black P84 Blue* Screen when blank Black * P84 Blue P76 Projector on Return Skip P85 Canon logo* Screen Aspect 16:10* P85 16:9 4:3 16:9 D. image shift 4:3 D. image shift P77 P77 P78 P78 P79 P79 P80 P80 P81 183 - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 184
Menu Configuration Image Adjustment Menu Image mode COMMON P86 Standard * Photo/sRGB User 1 - 5 (as creating profile) Digital PC/Analog PC P86 Presentation VividPhoto Component/HDMI P86 Dynamic Video Cinema Create Profile P87 Baseline Image P87 Mode (when user memory is selected - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 185
Menu Configuration System Settings Menu Network Setting Menu Power management mode Direct power on Beep Key lock Remote control Language Guide Off * P96 Standby Exit Off * P96 On Off P97 On * Off * P97 Main unit Remote control Ch1 P98 Ch2 Ch3 Ch4 Independent * English German - Canon REALiS WUX4000 Pro AV | Multimedia Projector WUX4000 User's Manual - Page 186
HONGKONG CO., LTD. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong CANON SINGAPORE PTE. LTD. 1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632 CANON KOREA CONSUMER IMAGING INC. Gangnam Finance Center 17F,737,YeoksamDong, Gangnam-gu, Seoul, 135-984, Korea
![](/manual_guide/products/canon-realis-wux4000-pro-av-multimedia-projector-wux4000-users-manual-7cd2a68/1.png)
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix
Installation and Maintenance
Projecting an Image
Safety Instructions
Before Use
Table of Contents
Setting Functions from Menus
Operation
Useful Functions Available
During a Presentation
ENG
MULTIMEDIA PROJECTOR
User’s Manual/
Installation
Manual