Canon REALiS WUX5000 D Multimedia Projector WUX5000 / WUX4000 User's Manual
Canon REALiS WUX5000 D Manual
View all Canon REALiS WUX5000 D manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS WUX5000 D manual content summary:
- Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual / Installation Manual Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 2
to a network, as well as perform maintenance. Read this manual thoroughly to make the most of your projector. Installation of the projector should be performed by a qualified technician. Contact the Canon Customer Support Center for further information. Symbols of Button Operations The projector - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 3
(P98) Turning on the Projector by Connecting the Power Cord (P98) Disabling the Beep During Operation (P99) Disabling Buttons (P99) Hiding Guide Messages (P101) Setting a Password (P103) Producing a Presentation Temporarily Blacking Out an Image (P68) Freezing the Picture (P68) Adjusting the Volume - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 4
Table of Contents How to Use This Manual 2 Quick Reference Guide 3 Safety Instructions...10 Safety Precautions ...11 CAUTION ON HANGING FROM THE CEILING 11 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE 12 AC Power Cord Requirement 14 Federal Communication Commission Notice 15 Canadian - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 5
Table of Contents Table of Contents Starting Projection ...45 ■ When the Language Selection Screen Appears 46 ■ When the Password Input Screen Appears 46 ■ When "No signal" Appears 46 ■ When Notebook Computer Screen Does Not Appear 47 ■ Adjusting Image ...47 Changing Notebook Computer Screen - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 6
Table of Contents Setting Display Status 77 Selecting an Image Projection Mode 77 Selecting an Input Signal Type (Analog PC 78 Selecting an Input Signal Type (Component 78 Adjust Input Signal (Analog PC) Total dots 79 Adjust Input Signal (Analog PC) Tracking 79 Adjust Input Signal (Analog PC) - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 7
Channel Settings 100 Selecting a Display Language 101 Showing / Hiding the Guide Screen 101 Showing / Hiding the Input Status 102 Selecting the HDMI Default Setting 109 Checking Projector Information 110 Installation Manual (Installation and Maintenance 111 Installation ...113 Installation - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 8
Table of Contents Connecting to a Network 131 Preparing the Remote Control 132 Connection Methods ...132 Setting an IP Address...133 ■ Windows 7...133 ■ Windows Vista...134 ■ Windows XP ...135 ■ Mac OS X ...136 ■ Resetting the IP Address Setting of the Computer 136 Network Settings on the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 9
Contents Table of Contents Appendix 165 Appendix ...167 Troubleshooting ...168 LED Indicator Meanings ...168 Symptoms and Operate the Remote Control 172 Relationship between Aspect and Screen Aspect 173 Supported Signal Types 175 Product Specifications 176 ■ Projector ...176 ■ Remote control - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 10
again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 11
Safety Instructions Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 12
■READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 13
of power source indicated on the marking label. If you are not sure of the type of power supplied, contact the Canon Customer Support Center or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 14
Safety Instructions AC potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 15
B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 16
Safety Instructions Precautions for Use As this section contains important safety-related situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. • If smoke is - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 17
Safety Instructions Safety Instructions Warning Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so could result in a - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 18
Safety Instructions Warning Pay attention to the following points regarding an electric shock or burn. If inspection, maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including consumable parts) or the remote control - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 19
Safety Instructions Safety Instructions Caution Pay attention to the following points regarding installation of the projector be performed. For details of maintenance costs, contact the Canon Customer Support Center. • When hanging the projector from a ceiling, put the projector down on the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 20
to cool down sufficiently. Failure to do so could result in a burn or personal injury due to heat from the lamp or projector. • When an instruction to replace the lamp has been displayed (LAMP Indicator Displays (P33)), the possibility of the lamp breaking will increase. Replace the lamp with a new - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 21
Safety Instructions Safety Instructions For Safe Use Pay attention to the following points when carrying or transporting the projector. • This projector is a precision by the user. Be sure to have the procedure performed by a qualified technician or contact the Canon Customer Support Center. 21 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 22
Safety Instructions For Safe Use Pay attention to the following points when installing or using the projector. • Be sure to install the projection or downward projection, it is necessary to change the settings of the projector. For further details, contact the Canon Customer Support Center. 22 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 23
Before Use 23 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 24
to a computer (part No.: YH7-2307) (mini D-sub 15-pin / mini D-sub 15-pin) For the U.S.A. and Canada User's Manual / Installation Manual (CD-ROM) Warranty Card Important Information ■Installing Remote Control Batteries 1 2 Open the battery com- Insert batteries. partment lid. Insert - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 25
Before Use Supplied Accessories Pay attention to the following points when handling the batteries. Failing to do so could result in a fire or personal injury. • Do not heat, short circuit or disassemble the batteries, or place them in a fire. • Do not attempt to recharge the batteries. • Remove the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 26
Preparing the Remote Control ■Remote Control Operating Range Point the remote control at the infrared remote receiver on the front or rear of the projector whenever pressing any button. (26.3') (26.3') • Use the remote control within a distance of approximately 8 m (26.3') from the projector. • - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 27
Before Use Part Names Main Unit ■Front Side Power cord connector (P45) Side control (P32) Lens unit Air intake vent Terminals and connectors Infrared remote receiver (P26) Air filter (P159) Do not block the air intake. Doing so may cause a malfunction. Anti-theft lock hole An anti-theft wire - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 28
Part Names ■Rear Side ■Bottom Side Exhaust vent Do not block the air exhaust. Doing so may cause a malfunction. Lamp cover Infrared remote receiver (P26) Screw holes for installation of ceiling attachment Adjustable feet (P118) 28 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 29
Depending on the installation environment, an extension pipe (part No.: RS-CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional ceiling attachment. • You should never install the ceiling attachment by yourself - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 30
Part Names Remote Control The projector can be operated using buttons on the remote control or the side control on the main unit. The remote control allows you to operate all functions of the projector. POWER button (P45, P66) Turns the projector on or off. FOCUS button (P59) Adjusts focusing. [ ] / - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 31
Part Names Before Use INPUT button (P49) Switches the input signal. LENS-SHIFT button (P60) Moves the lens up, down, left, or right. ZOOM button (P58) buttons: Move the lens. Adjusts the image size. [ ] / [ ] buttons: Increase the image size. [ ] / [ ] buttons: Decrease the image size. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 32
Part Names Side Control (1) LED indicators (P33) The projector status is shown by the LED indicators (off / on / flashing). For indicator status, refer to "LED Indicator Displays" (P33). • POWER ON (green): Lights up or flashes when the power is on. • STAND BY (red) : Lights up or flashes during - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 33
Before Use Part Names ■LED Indicator Displays The illumination status of the LED indicators indicates the operating status of the projector. : Off : Lit : Flashing LED indicator POWER ON (green) STAND BY (red) WARNING (red) LAMP (orange) TEMP (red) Operating status Power is not connected. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 34
the digital content image signal (HDMI). Carries both video and audio signals across a single cable. (1) (2) (3) (4) (5) (6) (7) (5)Service Port (CONTROL) This terminal is used by servicing technicians. It is not used during ordinary use. (6)AUDIO IN Terminal (AUDIO IN) (P39, P40, P43 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 35
MULTIMEDIA PROJECTOR User's Manual (Operation) 35 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 36
36 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 37
Projecting an Image 37 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 38
Steps for Connecting the Projector and Projecting an Image Installation work should be performed by a qualified technician. Contact the Canon Customer Support Center for further information. Connecting the Projector to Equipment (P128) Starting Projection (P45) Do you want to project an image from - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 39
User's Manual Projecting an Image Connecting the Projector Connecting the Projector to a Computer Connect the projector to the computer. A digital connection (P40) is recommended when projecting a WUXGA - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 40
Connecting the Projector BNC cable (Input signal type: [Analog PC] - P48) Computer Mini D-sub 15-pin BNC terminal converter cable (not included) Mini D-sub 15-pin BNC terminal converter cable (not included) Monitor output terminal (mini D-sub 15-pin) BNC cable (not included) When inputting - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 41
User's Manual Projecting an Image Connecting the Projector ■HDMI cable (Input signal type: [HDMI] - P48) Computer Projector HDMI cable (not included) To HDMI IN Digital image output - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 42
to AV Equipment Connect the projector and AV equipment. The description provided here is one example. For more detailed information, refer to the manual for the connected AV equipment. Before connecting the cables, turn off both the projector and AV equipment. ■Connecting to Digital Video Output - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 43
User's Manual Projecting an Image Connecting the Projector ■Connecting to Analog Video Output Terminal (Analog Connection) Component cable (Input signal type: [Component] - P48) A component video signal from - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 44
Connecting the Projector ■Outputting Audio to Speakers It is possible to output audio from the projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Audio cable (not included) Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 45
projector and the computer or AV equipment. (P42 - P44) 2 Connect the power cord and make sure that the [STAND BY] indicator is lit (red). User's Manual Projecting an Image Connect the ground terminal on the power plug to ground. Not doing so could result in an electric shock. Also the computer - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 46
Starting Projection Changing Operations When Projector is Turned On You can change operations when the projector is turned on as follows. • You can turn on the projector by connecting the power cord, without pressing the POWER button. (P98) • You can change the countdown window. (P87) • You can skip - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 47
User's Manual Projecting an Image Starting Projection ■When Notebook Computer Screen method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 7, you can turn on image output by holding down the Windows logo - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 48
not changed the input signal since the last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input signal Input terminal Types of connection cables HDMI HDMI cable (not included - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 49
User's Manual Projecting an Image Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to display the window shown on the lower right. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 50
Adjusting the Image Setting the Display Resolution of the Computer Based on the performance of the projector (resolution: 1920 x 1200 pixels), set the display resolution of the computer to "1920 x 1200 pixels" or the resolution closest to the output signal resolution of the computer. (P175) ■Windows - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 51
User's Manual Projecting an Image Adjusting the Image ■Mac OS X 1 Open the Apple Menu and select [System Preferences]. ], [Vertical position], [Horizontal pixels] and [Vertical pixels] to make adjustments. (P79 - P81) • For the signal types supported by the projector, see the table on page 175. 51 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 52
Adjusting the Image Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 53
Adjusting the Image 4 Use the [ ] / [ ] buttons to select the desired contents. Remote control Projector User's Manual Projecting an Image 16:10 Select this when you use a screen with aspect ratio of 16:10. Also, select this when you project an image - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 54
Adjusting the Image Moving Image with 16:9 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button when [16:9 D. image shift] is selected as the screen aspect in order to display the window shown on the lower right. Remote control 2 Use the [ ] / [ ] buttons to move the image. The minimum value is -60, - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 55
User's Manual Projecting an Image Adjusting the Image Moving Image with 4:3 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button when [4:3 D. image shift] is selected as the screen aspect - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 56
Adjusting the Image ■Selecting Aspect Ratio Select the aspect ratio of projected image based on the input signal type, aspect ratio of the screen and resolution. For more details, refer to page 173 "Relationship between Aspect and Screen Aspect". Types of Aspect Ratios Auto The image is projected at - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 57
aspect ratio type. For more details on the aspect ratios, refer to page 173 "Relationship between Aspect and Screen Aspect". Remote control Example: User's Manual Projecting an Image You can also select any aspect ratio from the menu. (P77) Some aspect ratios may not appear depending on the type - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 58
Adjusting the Image Adjusting the Image Size The size of the projected image can be adjusted by pressing the ZOOM button on the remote control or the LENS button on the projector. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 59
User's Manual Projecting an Image Adjusting the Image Adjusting the Focus To adjust the focus, press the FOCUS button on the remote control or the LENS button - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 60
Adjusting the Image Adjusting the Image Position To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the remote control or the LENS button on the projector. This function is referred to as "lens shift" because the position of the projected image is changed by - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 61
User's Manual Projecting an Image Adjusting the Image ■Resetting the Position The lens position after movement with the lens shift function is not returned when the power - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 62
Adjusting the Image Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button can be used to correct keystone distortion. • Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is too large to adjust, move the projector installation position so that it is completely - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 63
User's Manual Projecting an Image 2 Press the pointer buttons to adjust. Remote control Projector Adjusting the Image [ ] button Reduces the length of the upper edge [ ] button Reduces - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 64
dark room. This image mode emphasizes color saturation. Suitable for viewing images taken with a digital camera that supports sRGB in a moderately dark room. This image mode supports the sRGB standard. Suitable for watching video taken with a video camera in a moderately dark room. Suitable for - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 65
User's Manual Projecting an Image Selecting an Image Mode ■How to Select an Image Mode Press the IMAGE button on the remote control to select. The image - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 66
Turning Off the Projector 1 Press the POWER button to display the window shown on the lower right. Remote control Projector When this window is displayed, press the POWER button again to turn off the power. The lamp goes off, the [STAND BY] indicator starts flashing in red and the cooling - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 67
Useful Functions Available During a Presentation Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 68
Useful Functions Available During a Presentation Temporarily Blacking Out an Image Useful when: • You have finished the presentation. • You want to divert attendees' attention from the screen. Remote control Freezing the Picture Useful when: • You want to perform a computer operation which is - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 69
User's Manual Useful Functions Available During a Presentation Useful Functions Available During a Presentation Adjusting the Volume Muting the Sound Useful when: • You want to adjust the volume level - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 70
Useful Functions Available During a Presentation Zooming an Image Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the button. A part of the image is enlarged each time the button is pressed. Remote control - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 71
Useful Functions Available During a Presentation Showing the Elapsed Time Useful when: • You want to manage the timing of the presentation. User's Manual Useful Functions Available During a Presentation Screen Press the button to start counting. • The elapsed time is displayed on the lower right - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 72
72 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 73
Setting Functions from Menus Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 73 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 74
How to Use Menus Use the menus to set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into 5 tabs as shown below. [Display settings] tab (P77) [System settings] tab (P98) You can set the operation of the projector. You can set the type of signal or the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 75
not highlighted in orange, use the [ ] / [ ] buttons to move the highlight to the top. 3 Use the [ ] / [ ] buttons to select an item. Remote control Projector User's Manual Setting Functions from Menus 75 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 76
different screen (1) Example: Menu position 1. Select Menu Position. 2. Press the OK button to display a different screen. 3. Then follow the instruction on the screen. Selecting from a different screen (2) Example: Tracking 1. Select Input signal settings. 2. Select Tracking. 3. Press the OK button - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 77
Setting Display Status User's Manual Setting Functions from Menus Selecting an Image Projection Mode [Aspect] HDMI Digital PC Component Analog PC You can select a projection mode corresponding to the aspect - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 78
to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. • For the signal types supported by the projector, see the table on page 175. Press the OK button to accept your setting and then press the MENU button. • [Auto] is - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 79
User's Manual Setting Functions from Menus Adjust Input Signal (Analog PC) Total dots [Input signal settings] - [Total dots] HDMI Digital PC Component Analog PC You can adjust - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 80
Setting Display Status Adjust Input Signal (Analog PC) Horizontal position [Input signal settings] - [Horizontal position] HDMI Digital PC Component Analog PC You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. Display settings - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 81
length of the screen is too long or too short in the vertical direction. Display settings Input signal settings Vertical pixels User's Manual Setting Functions from Menus Use [ ] / [ ] to select a value. Use [ ] / [ ] to select a value. Screen When you have completed the adjustment, press the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 82
level is selected automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between [ the HDMI input level. For more detailed information, refer to the manual for the AV equipment connected to the projector. Auto RGB YCbCr - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 83
] HDMI Digital PC Component Analog PC You can select this as required when the images have low resolution. Display settings Progressive User's Manual Setting Functions from Menus Off The entire input signal (100%) is projected. The images projected may be smaller than the full projection - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 84
Setting Display Status Selecting a Menu Position [Menu position] HDMI Digital PC Component Analog PC You can change the position of menus displayed. Display settings Menu position Correcting the Screen Color [Screen color] HDMI Digital PC Component Analog PC You can adjust the color - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 85
Status Normal projection (none) Ceiling mounted projection User's Manual Setting Functions from Menus Rear projection None Ceiling mounted Rear from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • If you flip the image, the keystone - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 86
Setting Display Status No Signal Screen [User screen settings] - [No signal screen] HDMI Digital PC Component Analog PC You can display either a black or blue screen when there is no input signal. Display settings User screen settings No signal screen Screen When Blank [User screen settings - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 87
PC Component Analog PC Select according to the aspect ratio of the projection screen. (P52) Display settings Screen aspect Projector on User's Manual Setting Functions from Menus Skip Canon logo Projects an input signal immediately after turning on the projector. Displays the Canon logo that - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 88
. Photo/ sRGB Suitable for viewing images taken with a digital camera that sup- ports sRGB in a moderately dark room. This image mode supports the sRGB standard. Video Suitable for watching video taken with a video camera in a moder- ately dark room. Cinema Suitable for watching media - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 89
memory is displayed in the menu as [Baseline Image Mode]. Use the [ ] / [ ] buttons and select the save destination. (Saved memories are indicated by checkmarks.) User's Manual Setting Functions from Menus When the desired save destination is selected, press the OK button. 89 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 90
Selecting an Image Quality Adjusting the Brightness [Brightness] HDMI Digital PC Component Analog PC You can adjust the brightness of images. Image adjustment Brightness Adjusting the Contrast [Contrast] HDMI Digital PC Component Analog PC You can adjust the contrast of images. If you want - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 91
User's Manual Setting Functions from Menus Adjusting the Sharpness [Sharpness] HDMI Digital PC Component Analog PC You can adjust the sharpness of images. Image adjustment Sharpness Selecting - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 92
Selecting an Image Quality Adjusting Color [Color adjustment] HDMI Digital PC Component Analog PC You can adjust the color depth and hue of images for each primary color, red, green and blue. The color temperature can also be adjusted. Image adjustment Color adjustment Color Adjusts the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 93
fluorescent. Fluorescent Select this if the ambient light source is a day white fluorescent. Fluorescent H Select this if the ambient light source is normal. H Select this if the ambient light is high. User's Manual Setting Functions from Menus Off Adjust Projects an image with no correction. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 94
Selecting an Image Quality Noise reduction [Advanced adjustment] - [Noise reduction] HDMI Digital PC Component Analog PC You can reduce image noise. Image adjustment Advanced adjustment Noise reduction Dynamic gamma [Advanced adjustment] - [Dynamic gamma] HDMI Digital PC Component Analog - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 95
image colors with RGB (red, green, blue) and CMY (cyan, magenta, yellow). Image adjustment Advanced adjustment 6-axis color adjust User's Manual Setting Functions from Menus Off Disables the memory color correction function. L M Specifies the intensity of the memory H color correction in - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 96
Selecting an Image Quality Detailed Gamma Correction [Advanced adjustment] - [Fine-Tune Gamma] HDMI Digital PC Component Analog PC The four gamma curves (white, red, green, blue) can be adjusted. When the white curve is adjusted, the adjustment is also applied to the other three colors. This - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 97
User's Manual Setting Functions from Menus Reducing the Lamp Brightness [Lamp mode] HDMI Digital PC Component Analog PC Reducing the lamp brightness reduces power consumption and cooling - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 98
Setting Various Functions Selecting the Power Management Mode [Power management mode] HDMI Digital PC Component Analog PC You can turn off the lamp or projector automatically in order to save power when the projector is not in use. System settings Power management mode Skip the POWER Button - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 99
Component Analog PC You can lock the projector to prevent its operation from either the side control or remote control. System settings Key lock User's Manual Setting Functions from Menus Off Disables the beep. On Enables the beep. Press the OK button to accept your setting and then press the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 100
Setting Various Functions Main Unit and Remote Control Channel Settings [Remote control] HDMI Digital PC Component Analog PC When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remote control so that each operates independently. System - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 101
HDMI Digital PC Component Analog PC You can select whether to show or hide the guide screen which explains operations. System settings Guide User's Manual Setting Functions from Menus Use the buttons to select the menu language, then press the OK button. English German French Italian Spanish - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 102
Setting Various Functions Showing / Hiding the Input Status [Show Input Status] HDMI Digital PC Component Analog PC Select whether or not to show the input signal status on the screen when there is no signal or a signal has been set. System settings Show Input Status Selecting the HDMI Input - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 103
reset.) To forcibly cancel the password from the remote control, in standby state press the MENU button 3 times, then press the POWER button. User's Manual Setting Functions from Menus Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 104
Setting Various Functions Registering a Password [Other settings] - [Register password] HDMI Digital PC Component Analog PC You can register a password for starting projection. System settings Other settings Register password Prohibiting Operation of the Lens [Other settings] - [Lens Ctrl - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 105
PC You can extend the menu display time from the normal setting of 30 seconds to 3 minutes. System settings Other settings Menu display time User's Manual Setting Functions from Menus Select [Lens shift Reset] and press the OK button. The following screen for confirmation appears. Use the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 106
Setting Various Functions Showing / Hiding the High Temperature Warning Icon [Other settings] - [Overheat Warning Display] HDMI Digital PC Component Analog PC You can select whether or not to display the [High temperature warning] icon when the temperature inside the projector has increased and - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 107
. Otherwise, the lamp counter cannot indicate the correct timing for replacing the lamp. For details of lamp replacement, refer to page 161. User's Manual Setting Functions from Menus Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 108
Setting Various Functions Over 3,000 hours Displayed as a green, yellow and red bar. Select [OK] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button. ■ About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 109
settings and restore the system settings to the factory defaults. System settings Other settings Factory defaults Setting Various Functions User's Manual Setting Functions from Menus Select [Factory defaults] and press the OK button. The following screen for confirmation appears. OK Settings - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 110
Checking Projector Information [Information] HDMI Digital PC Component Analog PC You can check information about the signal types of the images projected and other information. Information Information shown Item Model name Input signal Firmware Serial No. IP address* Gateway address* E-mail - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 111
MULTIMEDIA PROJECTOR Installation Manual (Installation and Maintenance) Do not attempt installation yourself. Be sure to request installation from a qualified technician or contact the Canon Customer Support Center. 111 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 112
112 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 113
Installation 113 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 114
lens while transporting it. Doing so may damage the projector. Installation Precautions Be sure to read "Safety Instructions" on page 10 - 22. Pay attention to the following when installing the projector. • Do not by a qualified technician or contact the Canon Customer Support Center. 114 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 115
Installation Manual Installation Installation Precautions ■ Do Not Use in the Following Environments • Do not install ■ When Using the Projector at Altitudes Greater than 2,300 m Contact the Canon Customer Support Center if you intend to use this projector at altitudes of 2,300 m or higher. 115 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 116
change the settings of the projector. If using the projector for upward or downward projection, please contact the Canon Customer Support Center. ˃ ˃ Upward projection: Inclination of the projector should be no more than 10° from the vertical axis. *2 ˃ ˃ Downward projection: Inclination - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 117
Installation Manual Installation Installation Procedure Selecting the Projection Method and Installation Location (P118) Installing / Removing the Lens Unit (P119) Setting Up the Projector (P124) Connecting to AV - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 118
Selecting the Projection Method and Installation Location ■Ceiling Mounting or Rear Projection You can mount the projector on the ceiling (ceiling mounting) with it turned upside down or place it behind the screen (rear projection) if you use a translucent screen. Ceiling Mounting Rear Projection - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 119
Installation Manual Installation Installing / Removing the Lens Unit ■Installing the to install or remove the lens unit yourself. Be sure to request this service from a qualified technician or contact the Canon Customer Support Center. • When installing and removing the lens unit, be sure not to - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 120
Installing / Removing the Lens Unit 2 Loosen the cosmetic panel screw, then slide the cosmetic panel toward the rear to remove it. The cosmetic panel screw is attached to the cosmetic panel and designed to prevent it from falling off. 3 In order to prevent damage, close the lamp cover and - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 121
Installation Manual Installation Installing / Removing the Lens Unit 5 Then turn the projector back over and remove the sleeve. 6 Referring the following illustration, insert the lens connector of - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 122
Installing / Removing the Lens Unit 8 Insert the projector lens cable into the connector until a click sound is heard. 9 Return the sleeve, cosmetic panel, and lamp cover to their original conditions. When the power is first turned on after the lens unit has been installed or replaced, lens shift - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 123
Installation Manual Installation Installing / Removing the Lens Unit ■Removing the Lens Unit 1 Perform steps 1 to 5 of "Installing the Lens Unit" (P119 - P121) and remove the sleeve. 2 Disconnect - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 124
Setting Up the Projector ■Positioning the Projector in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projection. • The screen must not be exposed to direct sunlight or light from lighting equipment. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 125
Setting Up the Projector Installation Manual Installation Lens unit Diagonal when 16:10 (diagonal) 16:10 Width Height Image size (cm) 16:9 Width Height 4:3 Width Height Projection distance Wide limit Tele - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 126
Setting Up the Projector ■Lens Shift Function The projector includes a lens shift function. Operation of the buttons slides the lens up, down, left, and right, moving the image position. For the function operations, refer to "Adjusting the Image Position" (P60). The amount of lens shift is indicated - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 127
Setting Up the Projector ˃ Moves right by up to approximately 10% of the image width. Installation Manual Installation At maximum rightward lens shift Area where lens movement is not possible With the Standard Zoom Lens and Long Zoom Lens, when the shift - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 128
DVI-D IN terminal can only be used to connect to a PC. Computer (P41) * Select playback mode before connecting. LAN terminal Network (P132) Service port (not normally used) AUDIO IN terminal AUDIO OUT terminal Audio signal for each image input (P39, P40, P43) Analog PC / Component Amplified - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 129
Installation Manual Installation Connecting to AV Equipment ■Connection Terminal and Connection Cable Input signal Input terminal Types of connection cables HDMI HDMI cable (not included) Digital PC - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 130
130 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 131
Connecting to a Network Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 131 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 132
IP address is not overlapped with other computers that are on the same LAN. When you set the IP address of the projector, follow the instruction in "Configuring the Network from the Computer" (P142) on the web screen or refer to "TCP / IP Setting" (P141). • When you connect the computer to - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 133
Installation Manual Connecting to a Network Preparing the Remote Control Setting an IP Address Following is an explanation of how to set the PC IP address for each - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 134
Preparing the Remote Control ■Windows Vista 1 From the PC [Start] menu, select [Control Panel]. 2 Click on [View network status and tasks]. 3 From the menu on the left side of the window, click on [Manage network connections]. 4 Right-click [Local Area Connection], and open [Properties]. 5 Select [ - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 135
Installation Manual Connecting to a Network Preparing the Remote Control ■Windows XP 1 From the PC [Start] menu, select [Control Panel]. 2 Select [Network and Internet Connections] and open [Network - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 136
Preparing the Remote Control ■Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the System Preferences window, click [Network] to display the Network preference window. 3 Select [Built-in Ethernet] and click the [TCP/IP] tab. Take notes of the original network settings (IP address - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 137
] You can lock / unlock the network settings so that they cannot be changed and cancel the lock. Network Setting Network setting lock Installation Manual Connecting to a Network Unlock Cancel the lock and allow other network settings to be changed. The password must be entered in order to cancel - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 138
Network Settings on the Projector Turning On / Off the Network Function [Network function] You can turn the projector network function on and off. Power can be saved by turning the function off. Network Setting Network function Setting a Network Password [Network Password setting] You can set - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 139
using commands that meet PJLink standards. Network Setting PJLink Installation Manual Connecting to a Network When [Register Network Password] is (Japan Business Machine and Information System Industries Association). This projector supports all commands that are defined by PJLink Class 1, and has - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 140
Network Settings on the Projector What is PJLink? In September 2003, the PJLink Working Group was established under the Data Projector Committee. During the first year, this PJLink Working Group standardized PJLink as a new interface specification for projectors. PJLink is a unified standard for - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 141
Network Settings [Network setting initialization] You can initialize the projector network settings. Network Setting Network setting initialization Installation Manual Connecting to a Network When [TCP/IP setting] is selected, the window shown below appears. Use the [ ] / [ ] buttons to - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 142
Configuring the Network From the Computer ■Displaying and Configuring the Network Configuration Screen 1 Turn on the computer and projector. 2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The password input screen appears. The factory - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 143
unit: Filter error Unknown error To operate the projector from the computer, click [Projector control] (P153). 4 To configure, click [Settings]. The settings window appears. Installation Manual Connecting to a Network 143 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 144
Configuring the Network From the Computer 5 Select the function to set from the menu (1), then enter the setting in the displayed field (2) and click [OK] (3). (1) (2) (3) 6 A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 145
Installation Manual Connecting to a Network Configuring the Network From the Computer ■Resetting to Factory Defaults 1 Perform steps 1 - 3 of "Displaying and Configuring the Network Configuration Screen" (P142) to - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 146
when sending a test mail. Failed to connect to the POP3 server attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test mail failed due to a connection failure with the SMTP server or - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 147
and set basic network information. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). Installation Manual Connecting to a Network Item Password User name New password Confirm new password TCP/IP DHCP IP address Subnet mask Default gateway - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 148
Setting Up the Network ■Setting Up Email [Mail] From [Mail] in the settings window, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). Item To: Cc: From: SMTP server IP address - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 149
is sent when an error occurs. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). Installation Manual Connecting to a Network Item Mail authentication User name Password Confirm password POP3 server IP address POP3 server port number POP before - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 150
Setting Up the Network ■Sending a Test Mail [Send test mail] From [Send test mail] in the settings window, you can send a test mail to the mail address that was set in [Mail]. The settings cannot be changed from this window. Item To: Cc: From: Subject: Explanation The recipient address which was - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 151
installed on the network. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). Installation Manual Connecting to a Network Item Projector name Location Explanation Factory default setting Enter the projector name in 1-byte alphanu- WUX5000 or - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 152
Setting Up the Network ■Setting PJLink [PJLink] From [PJLink] in the setting window, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). For - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 153
Installation Manual Connecting to a Network Controlling the Projector from a Computer When the projector is connected to a network, it is possible to control the projector from a computer via - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 154
Controlling the Projector from a Computer 5 The projector control screen appears. The projector can be controlled from this screen. Item Projector name IP address Refresh Power Input Aspect Image mode Blank Mute Auto PC Information Explanation The name of the connected projector is displayed. ( - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 155
Error Mail Installation Manual Connecting to a Network The reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, * For details, contact the Canon Customer Support Center. 155 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 156
156 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 157
Maintenance 157 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 158
cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 159
. First insert the air filter tab into the groove on the handle side of the frame, then press the air filter into the frame. Installation Manual Maintenance 159 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 160
filter will not work properly. • When the lamp is replaced, it is recommend that you also replace the air filter. • Contact the Canon Customer Support Center for further information. • Replacement air filter part No.: RS-FL01 Cleaning the Air Filter The air filter protects the lens and mirror inside - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 161
disappeared, all buttons become operable. • You can check the usage time of the lamp in [Lamp counter] in the [System settings] menu. (P107) 161 Installation Manual Maintenance - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 162
it may break during use if it has been scratched or subjected to impact. If the lamp breaks, contact the Canon Customer Support Center or follow the instructions in "Precautions on the lamp" (P19) and "Lamp handling precautions" (P20). • When replacing the lamp, do not remove any screws other than - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 163
the lamp cover and tighten the screws. 6 Turn on the power. Bring up the menu and select [System settings] - [Other settings] - [Lamp counter]. 163 Installation Manual Maintenance - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 164
Replacing the Lamp 7 Select [Reset] - [OK] to reset the lamp counter. • It is recommended that you also replace the air filter when you replace the lamp. • Contact the Canon Customer Support Center for further information. • Replacement air filter product number: RS-FL01 164 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 165
MULTIMEDIA PROJECTOR Appendix 165 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 166
166 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 167
Appendix 167 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 168
Troubleshooting LED Indicator Meanings When there is a problem with the projector, the LED indicator same warning occurs again, there may be a malfunction in the projector. Contact the Canon Customer Support Center. WARNING and Faulty lamp LAMP are lit. The lamp does not illuminate. Turn the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 169
Troubleshooting LED indicator status WARNING flashes 6 times. WARNING flashes 3 times. Meaning Faulty lens connector Filter error Countermeasure Disconnect the lens connector which joins the lens unit and projector. Contact the Canon Customer Support the Canon Customer Services Center. Check - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 170
Troubleshooting Cause No input signal type has been selected. The image signal type is incorrect. The BLANK function has been selected. No image is projected due to a problem notebook computer. For more detailed information, refer to the manual that came with your computer. Check whether the dual - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 171
Troubleshooting ■The Projected Image Is Blurred Cause Countermeasure The image is out of focus. Adjust the focus. (P59) The distance to the screen is too short. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 172
Troubleshooting Cause The lamp has broken (or there is a lamp malfunction). The operating temperature is inappropriate. Other reasons Countermeasure Check whether the lamp has broken. If the lamp has broken, follow the instructions in "Precautions on the lamp" on page 19. If the lamp has not - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 173
Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P52) and aspect (P56). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type. - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 174
Relationship between Aspect and Screen Aspect Using Screen Screen aspect ratio setting PC Resolution of screen WUXGA 16:10 WSXGA+, WXGA+ 16:10 WXGA [4:3] [4:3 D. image shift] UXGA 4:3 SXGA+, XGA, SVGA, VGA 4:3 SXGA 5:4 Purpose of projection Aspect setting Project an image in the - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 175
Signal Types This projector supports the following signal types. If your computer or AV .000 * The specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of 162 MHz or higher. * Use a VGA cable in - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 176
/ 18.7 lbs (not including projection lens unit) Remote control, remote control dry-cell batteries, power cord, PC connection cable, User's Manual / Installation Manual, warranty certificate *1 When using a Standard Zoom Lens (RS-IL01ST). Varies depending on the type of lens unit. *2 When lamp mode - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 177
Product Specifications ■Remote control Power supply DC 3.0V, using two AAA-size batteries Operating range Dimensions Weight (not including batteries) Approx. 8 m± 25° horizontal and vertical (to infrared remote receiver) 43 mm (W) x 23 mm (H) x 135 mm (D) / 1.7 (W) x 0.9 (H) x 5.3 (D) in. 56 g - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 178
Product Specifications ■External View 9911mmmm (3.5'') 115500mmmm (5.9'') 92 mm 92(3m.6m'') 43403m0mmm(16.9'') 38308m0mmm(15.0'') Bolt holes (M4 x 6) for installation of ceiling attachment 1281m28mm(5m.0'') 2342.354m.5mm(m9.2'') 53 mm 5(32m.1m'') 21221m2mm(m8.4'') (6.1'') 11441.1.55mmmm - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 179
■Service Port (CONTROL) Pin assignment Product Specifications Pin No. 1 2 3 4 5 6 7 8 9 Signal OPEN RxD TxD OPEN GND OPEN OPEN OPEN OPEN Communication format Communication mode : RS-232-C, asynchronous, - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 180
Product Specifications Commands ASCII representation Image mode USER 1 IMAGE=USER_1 USER 2 USER 3 IMAGE=USER_2 IMAGE=USER_3 USER 4 IMAGE=USER_4 Image mode acquisition Brightness Brightness acquisition Sharpness Sharpness acquisition Contrast Contrast acquisition Aspect USER - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 181
Product Specifications 181 Appendix Other Information - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 182
74 Displaying logo 87 DVI 40, 48, 129 DVI-D IN 40 DVI-D IN Terminal 34 Dynamic gamma 94 F Factory defaults 109 FOCUS 59 FREEZE 68 G Guide 101 H HDMI 41, 42, 48, 129 HDMI color space 82 HDMI IN Terminal 34, 41, 42 HDMI input level 82 HDMI over scan 83 Horizontal - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 183
Index LED indicator 168 M Making a Gamma Correction 91 Memory Color Correction 95 MENU 74 Menu display time 105 Menu position 84 MUTE 69 N Network function 138 Network Setting 74 Network setting initialization 141 Noise reduction 94 O OK 31 P Password settings 103 PJLink 139 POWER 45 - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 184
the projector from the ceiling. For details, refer to the assembly and installation manual provided with the ceiling attachment RS-CL11. • Installing / Removing the Lens unit, contact a qualified technician or the Canon Customer Support Center for further information. Do not attempt installation and - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 185
Menu Configuration Display settings Menu Aspect Digital PC/Analog PC Auto * Full 16:9 4:3 True size HDMI Auto * Full 16:9 4:3 Zoom True size Component Auto * 16:9 4:3 Zoom True size Input signal select Analog PC 640x480 : 1920x1200 Component Auto * 1080p 1080i 1035i 720p 576p 480p 576i 480i - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 186
Menu Configuration Image Adjustment Menu Image mode COMMON P88 Standard * Photo/sRGB User 1 - 5 (as creating profile) Digital PC / Analog PC P88 Presentation VividPhoto Component / HDMI P88 Dynamic Video Cinema Advanced adjustment Ambient light Off * Adjust Type Level P93 Tungsten - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 187
Menu Configuration System Settings Menu Network Setting Menu Power management mode Direct power on Beep Key lock Remote control Language Guide Off * P98 Standby Exit Off * P98 On Off P99 On * Off * P99 Main unit Remote control Ch1 Ch2 Ch3 Ch4 Independent * P100 English German - Canon REALiS WUX5000 D | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 188
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga,
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix
Installation Manual
Projecting an Image
Safety Instructions
Before Use
Table of Contents
Setting Functions from Menus
Useful Functions Available
During a Presentation
User’s Manual
ENG
MULTIMEDIA PROJECTOR
User’s Manual /
Installation
Manual