Home » Canon Manuals » Projectors » Canon REALiS X600 » Manual Viewer

Canon REALiS X600 User Manual

Canon REALiS X600 Manual

View all Canon REALiS X600 manuals

Add to My Manuals
Save this manual to your list of manuals

Canon REALiS X600 manual content summary:

Canon REALiS X600 | User Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 2
z Adjust the height of the projecting image (P38). z Select a display language when turning on the projector for the first time (P36). 4. Set up the computer. z Turn on the computer and set the resolution. P39-40 5. Select the input signal by pressing the button. P43-45 z Select an appropriate
Canon REALiS X600 | User Manual - Page 3
the aspect ratio or display area in the [Aspect] menu as required (P64, 78, 79). Finishing the projection... Turn off the projector z Turn off the projector and unplug the power cord. P53-54 * Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video image. 3
Canon REALiS X600 | User Manual - Page 4
The MULTIMEDIA PROJECTOR SX6/SX60/X600 are high-performance projectors which project the data from the computer and the moving picture from the DVD player to the big screen. Major Features Smooth and Beautiful Imaging Capability Incorporation of AISYS, Canon's unique optical engine, and LCOS (Liquid
Canon REALiS X600 | User Manual - Page 5
This Manual Supplied Manuals User's Manual (This Document) This is a universal manual for the projector, SX6/SX60/X600. This manual provides detailed information on how to use the projectors. Read this manual thoroughly to make the most of your projector and ensure safety. Quick Start Guide (Another
Canon REALiS X600 | User Manual - Page 6
, or other accidents. If your projector is not operating correctly, read this manual again, check operations and cable connections, and try the solutions shown in the "Troubleshooting" section at the end of this booklet. If the problem still persists, contact the service center or the dealer where
Canon REALiS X600 | User Manual - Page 7
INSTRUCTIONS Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. z This projector projects intense light the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be
Canon REALiS X600 | User Manual - Page 8
the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the projector. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection of the projector during a lightning storm, or when it is left unattended or unused for long
Canon REALiS X600 | User Manual - Page 9
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions
Canon REALiS X600 | User Manual - Page 10
INSTRUCTIONS AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country you purchased it. AC Power Cord for the United States and Canada: The AC Power Cord used in the United States and Canada THE US LAMP(S) INSIDE THIS disposal service.
Canon REALiS X600 | User Manual - Page 11
INSTRUCTIONS Federal Communication Commission Notice Multimedia Projector, Model: SX6/SX60/X600 equipment off and on, the user is encouraged to try to instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon
Canon REALiS X600 | User Manual - Page 12
, consult a doctor immediately. If a lamp explodes, its shards may scatter inside the projector. Ask the Canon service representative to clean and check the inside of the projector and replace the lamp. Disposal of Waste Lamp Dispose of the projectors mercury lamp according to local regulations just
Canon REALiS X600 | User Manual - Page 13
SAFETY INSTRUCTIONS Installation Precautions Ensure that the projector is installed with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Installation Install the projector correctly. Incorrect installation may cause troubles
Canon REALiS X600 | User Manual - Page 14
of Contents Quick Reference - How to start projection 2 Features of the Multimedia Projector SX6/SX60/X600 4 Supplied Manuals and Symbols Used in This Manual 5 Supplied Manuals...5 Safety Instructions 6 Safety Precautions...7 AC Power Cord Requirement 10 Federal Communication Commission Notice
Canon REALiS X600 | User Manual - Page 15
Color Adjustment (2 92 Making Advanced Color Adjustment (1 93 Making Advanced Color Adjustment (2 93 Making Advanced Color Adjustment (3 94 Reducing the Lamp Brightness 94 Resetting the Image Settings 95 Setting Various Function with the System Settings Menu 96 Setting Auto Setup Function 96
Canon REALiS X600 | User Manual - Page 16
the Air Filter 107 Replacing the Lamp ...108 Troubleshooting 112 WARNING Lamp Flash Patterns 112 Symptoms and Solutions 113 Appendix ...118 Supported Computer Signal Types 118 Relationship between Screen Size and Projecting Distance 119 Glossary ...120 Specifications ...123 Index ...125 Menu
Canon REALiS X600 | User Manual - Page 17
BEFORE USE Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 18
Supplied Accessories Check whether the following accessories are supplied with the projector. z Remote control z Batteries (type AAA, two) for (0.4m/1.3') [YH7-2084] For the U.S.A and Canada z Carrying bag z Lens cap z Lens cap strap z User's Manual z Quick Start Guide z Warranty card 18
Canon REALiS X600 | User Manual - Page 19
in use, attach the lens cap to protect the lens from dust and other foreign objects. Putting the Projector in the Carrying Bag As shown in the illustration on the right, put the projector in the carrying bag with its lens faces sideway. Align the lens with the dimple on the cushioning
Canon REALiS X600 | User Manual - Page 20
Front Side Terminals and Connectors Infrared Remote Receiver (P26) Ranging Window Do not place any obstacle between the projector and the screen, as the auto focusing function may fail to operate correctly. Be sure to remove the lens cap during projection. Failure to do
Canon REALiS X600 | User Manual - Page 21
intake. Failure to do so will result in malfunctions or fire hazards. Air Intake Vent Lamp Cover (P109) Rear Adjustable Foot (for fine adjustment) Mounting the Projector on the Ceiling You can mount the projector on the ceiling. You need an optional ceiling mounting bracket (part number: RS-CL06
Canon REALiS X600 | User Manual - Page 22
(1) Infrared Remote Emitter Sends a signal to the infrared remote receiver on the main unit. (2) POWER button (P35, 53) (11) (12) Turns the projector on or off. (14) (3) AUTO SET button (P41, 60) (15) Performs auto adjustment on focusing, keystone distortion, screen color (13) correction
Canon REALiS X600 | User Manual - Page 23
button (P69) Zooms the image in or out digitally. Pressing enlarges the image and pressing reduces the image. (15) SPOT button (P68) Performs the spot light function. (16) R-CLICK button (P70) Acts as the right button of a mouse under the USB connection. (17) NO SHOW button (P66) Turns the picture
Canon REALiS X600 | User Manual - Page 24
being turned on. Blink between red and green: The projector is under the power management mode. (2) WARNING lamp (P112) Flashes red when a problem has been detected on the projector. (3) LED illumination lamp (P100) Indicate the projector status with 3 blue LEDs. Blinking from the left: The
Canon REALiS X600 | User Manual - Page 25
(COMPONENT/SCART). (3) Monitor Output Terminal ( ) (P34) Outputs an analog PC signal to display an image on an external monitor. (4) SERVICE PORT jack Exclusively used by the service personnel (it is not used normally). (5) S-VIDEO IN terminal (P57) Receives an S-Video signal from an AV equipment
Canon REALiS X600 | User Manual - Page 26
and main unit. z The infrared remote receiver on the main unit is exposed to direct sunlight or strong light of lighting equipment. z The remote control uses infrared light. z When you use two projectors at the same time, you can change the channel settings to pre- vent the two remote controls from
Canon REALiS X600 | User Manual - Page 27
Safety Instructions Before Use Setting Up the Projector SETTING UP THE Projecting an Image from the Computer PROJECTOR Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 28
screen from the intersection of optical axis and screen surface when an image is projected at right angle to the screen. z Install the projector at the position where the projection distance is between approximately 1.2 m (3.9') to 9 m (29.5'). If the installation position is too close or too far
Canon REALiS X600 | User Manual - Page 29
vent (fan) on the right side of the projector and the air intake vent on the bottom of the projector. z The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended to limit ambient lighting in order to improve the image quality. Ceiling
Canon REALiS X600 | User Manual - Page 30
Canon REALiS X600 | User Manual - Page 31
Safety Instructions Before Use Setting Up the Projector PROJECTING AN IMAGE FROM THE COMPUTER Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix
Canon REALiS X600 | User Manual - Page 32
[ANALOG PC-2] (P45) z To ensure projection of high-resolution high-quality images, it is recommended to use highperformance cables. z An adapter may be required depending on the shape of the connector on the computer. For more detailed information, refer to your computers instruction manual. 32
Canon REALiS X600 | User Manual - Page 33
Input Signal: Select [DIGITAL PC] or [ANALOG PC-1] (P43) Input Signal: Select [ANALOG PC-2] (P45) z Before connecting cables, turn off both the projector and computer. z It may project an image inappropriately when projecting the digital PC signal in 1280 x 1024 or 1400 x 1050 depending on the
Canon REALiS X600 | User Manual - Page 34
Commercial VGA cable External monitor Image input terminal (mini D-sub 15-pin terminal) AUDIO IN terminal Projector z You can connect one external monitor. The multi-monitor display is not supported. z The projected image is displayed on the external monitor. z You cannot output the input signal
Canon REALiS X600 | User Manual - Page 35
COMPUTER Starting Projection Connect the power cord and turn on the projector to start the projection. z Once the projector is turned off, it cannot be turned on for a while. Wait until the lamp is cooled down and the [POWER] indicator lights in red. 1 Connect the power cord. Fully insert the power
Canon REALiS X600 | User Manual - Page 36
the power plug to ground. Otherwise, the operating computer may suffer electromagnetic radiation problems and poor reception by TV and radio. Unplug the Power Cord When the Projector is Not in Use The projector constantly consumes approximately 7W power even when it is turned off. To ensure safety
Canon REALiS X600 | User Manual - Page 37
fine adjustment. Zoom out: Press [ ] for rough adjustment. Press [
Canon REALiS X600 | User Manual - Page 38
the projection angle can be adjusted up to 10 degrees. z If the projector is tilting in the lateral direction, use the rear adjustable feet on both sides . If the distortion is too large, adjust the height of the projector with a pedestal. The keystone distortion can be corrected with the Auto
Canon REALiS X600 | User Manual - Page 39
the most of the display performance of this projector, set output signal resolution of the computer to an optimum value. Windows x 768 pixels" for X600). If this resolution is not available, select the highest resolution under 1400 x 1050 pixels. (under 1024 x 768 pixels for X600) 3. Click the [OK
Canon REALiS X600 | User Manual - Page 40
require to turn on the external monitor output to project an image from the projector. To turn on the external monitor output, press the [LCD] or [VGA] function key ([F1] to [F10]) or a key with computer series not listed in the above table, refer to the User's Manual that came with the computer. 40
Canon REALiS X600 | User Manual - Page 41
keystone", and "Auto input" are enabled in the factory. z You can manually set or adjust each function. You can set or adjust a specific function independently if you press the [AUTO SET] button during the manual adjustment. z Select [Greenboard] from [Screen color] when using a greenboard (dark
Canon REALiS X600 | User Manual - Page 42
PROJECTING AN IMAGE FROM THE COMPUTER 3 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. z You can perform this step by selecting [OK] with the [
Canon REALiS X600 | User Manual - Page 43
PROJECTING AN IMAGE FROM THE COMPUTER < Selecting an Input Signal You can select an input signal type. Select an input signal from the followings: ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable (supplied cable) DIGITAL PC : Digital signal Connecting with a DVI digital
Canon REALiS X600 | User Manual - Page 44
< < PROJECTING AN IMAGE FROM THE COMPUTER 3 If the target input signal is unavailable from the list at the left, press the [>] button, and then press the [ ] / [ ] button to select the target input signal from the list at the right. 4 Press the [OK] button. 44
Canon REALiS X600 | User Manual - Page 45
PROJECTING AN IMAGE FROM THE COMPUTER < < < < „ Selecting ANALOG PC-2 z Select [ANALOG PC-2] for Input Terminal-2. 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select the second top item in the menu with the [INPUT] button. The selection is toggled through available input signals from
Canon REALiS X600 | User Manual - Page 46
Adjusting the Focus You can adjust the focus. Follow the steps below to adjust the focus manually if the Auto setup function (Auto focus) does not adjust the focus appropriately. 1 Press the range of 1.2 m (3.9') to 9 m (29.5'). Move the projector installation position if such is the case (P28). 46
Canon REALiS X600 | User Manual - Page 47
Adjusting Keystone Distortion The Auto setup function (Auto keystone) automatically adjusts the keystone distortion in a longitudinal direction. Follow the steps below if the function does not adjust the distortion appropriately or you want to adjust the keystone distortion in a horizontal direction
Canon REALiS X600 | User Manual - Page 48
PROJECTING AN IMAGE FROM THE COMPUTER 3 Press the [OK] button. z The result of keystone adjustment is memorized. If you place the projector at the same position, the keystone adjustment is not necessary. z When the Keystone adjustment is selected, signals are processed digitally. The image may look
Canon REALiS X600 | User Manual - Page 49
number of dots and tracking depending on a signal type (SXGA+, XGA, etc.). The auto PC adjustment function does not need to be performed if the projector is projecting an image properly with [AUTO SETUP]. You can use this function if the input signal is [ANALOG PC-1] or [ANALOG PC-2]. 1 Press the
Canon REALiS X600 | User Manual - Page 50
to seriously enjoy the atmosphere of a movie theater in a dark room. SX6 Standard Presentation Movie&Photo AdobeRGB sRGB SX60 Standard Presentation Movie Home Cinema sRGB X600 Standard Presentation Movie sRGB 50
Canon REALiS X600 | User Manual - Page 51
Adjust this to decrease or increase contrast of the entire image. - Sharpness Adjust this to soften or sharpen an image. - Gamma Adjust this when light or dark portions of an image are obscure. - Color adjustment Adjust this to adjust the color level and balance. - Advanced adjustment Adjust this
Canon REALiS X600 | User Manual - Page 52
size. A clear image can be obtained because of no image processing. z If the display resolution of the computer is higher than 1400 by 1050 dots (1024 by 768 dots for X600), select a lower resolution before starting projection. z The upper, lower, left, and/or right portions of a projected image
Canon REALiS X600 | User Manual - Page 53
Wait at least 5 minutes before turning off the projector. z Wait at least 5 minutes before turning on the projector when you turn off the projector. It may shorten the lamp life if you turn on the projector immediately after turning it off. z Using the projector for a long time may shorten the life
Canon REALiS X600 | User Manual - Page 54
on the top control or remote control is pressed. Exit mode Select this mode to turn off the projector automatically. In the exit mode, the lamp is turned off and cooled down. When the lamp has been cooled down, the [POWER] indicator stops flashing in red and stays on and the power is
Canon REALiS X600 | User Manual - Page 55
Safety Instructions Before Use Setting Up the Projector PROJECTING AN IMAGE FROM AV EQUIPMENT Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix
Canon REALiS X600 | User Manual - Page 56
and AV equipment. z The above illustrations are just examples. For more detailed information, refer to the manual for the connecting AV equipment. About the Component Cable The projector cannot be connected to an AV equipment only with the supplied component cable (RCA/Mini D-sub 15-pin). Please
Canon REALiS X600 | User Manual - Page 57
INPUT Signal: Select [DIGITAL VIDEO] (P61) INPUT Signal: [S-VIDEO] is selected automatically z Connect an audio cable if you want to use the projector's speaker (P34). z Set the input signal as [COMPONENT] by referring to "Projecting an Image from the Com- puter" and "5-BNC cable" if you
Canon REALiS X600 | User Manual - Page 58
PROJECTING AN IMAGE FROM AV EQUIPMENT Video cable Video output terminal (VIDEO OUT terminal) AV equipment Commercial Video cable Video input terminal (VIDEO IN) Projector INPUT Signal: [VIDEO] is selected automatically 58
Canon REALiS X600 | User Manual - Page 59
for projecting an image from a computer. This section provides information specific to the projection from an AV equipment. For more detailed information menu. P64, 78, 79 Stopping projection... Turn off the projector. P53* z Turn off the projector and remove the power cord from the AC outlet. *
Canon REALiS X600 | User Manual - Page 60
keystone", and "Auto input" are enabled in the factory. z You can manually set or adjust each function. You can set or adjust a specific function independently if you press the [AUTO SET] button during the manual adjustment. z Select [Greenboard] from [Screen color] when using a greenboard (dark
Canon REALiS X600 | User Manual - Page 61
the signal is selected and projected. z Connecting with a HDMI/DVI cable, the image may be projected with the minimum resolution (480p or 575p) due to the specification of the AV equipment. „ Selecting DIGITAL VIDEO 1 Press the [INPUT] button. The [INPUT] window appears. PROJECTING AN IMAGE FROM
Canon REALiS X600 | User Manual - Page 62
< < < < PROJECTING AN IMAGE FROM AV EQUIPMENT 2 Select the top item in the menu with the [INPUT] button. The selection is toggled through available input signal types from above. z You can select any input signal type from all options through the [ ] / [ ] button. 3 If [DIGITAL VIDEO] is
Canon REALiS X600 | User Manual - Page 63
PROJECTING AN IMAGE FROM AV EQUIPMENT < < < < „ Selecting SCART z Select [SCART] for Input Terminal-2. 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select the second top item in the menu with the [INPUT] button. The selection is toggled through available input signals from above. z
Canon REALiS X600 | User Manual - Page 64
PROJECTING AN IMAGE FROM AV EQUIPMENT Selecting a Screen Mode (Aspect) You can select one of three screen modes depending on the aspect ratio of your AV equipment or content software. z You can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P78, 79). „ Full screen Select
Canon REALiS X600 | User Manual - Page 65
Safety Instructions Before Use USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting
Canon REALiS X600 | User Manual - Page 66
blackening out the image (P88). z The (middle) LED illumination lamp on the top control flush slowly while blackening out the image. z A guiding message appears if you press an invalid button while the NO SHOW function is on. The projector shows the [MUTE] icon on the screen. Canceling the MUTE
Canon REALiS X600 | User Manual - Page 67
Useful when: X You want to adjust the volume level of the projectors speaker. Adjusting the Volume Volume bar appears on the screen. The " The (left and right) LED illumination lamps on the top control flushes slowly while stopping the image. z A guiding message appears if you press an invalid
Canon REALiS X600 | User Manual - Page 68
Showing the Elapsed Time Pointing with a Spotlight X Useful when: X You want to manage the proceedings of the presentation. The elapsed time from 00:00 to 59:59 is displayed at the lower right corner of the screen. X Useful when: X You want to point to a portion of an image that should draw
Canon REALiS X600 | User Manual - Page 69
zoom ratio is 1x to 12x. z You can freeze the enlarged image. z Press the [OK] button to cancel the digital zoom function. z The following guiding message appears if you press an invalid button during operating the digital zoom function. Zooming Out an Image Press this button repeatedly until the
Canon REALiS X600 | User Manual - Page 70
are turned off, and then connect the supplied USB cable between the USB terminals on the computer and the projector. z This function is supported on Windows XP, Windows 2000, Windows Me, or Mac OS 9.2 and later. Moving the Cursor USB terminal Computer You can move the mouse cursor vertically
Canon REALiS X600 | User Manual - Page 71
USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATION Page Up or Down through the Pages X Useful when: X You want to page up or down through the projected application pages with the remote control. You can page up or down in the projected application with the supplied remote control. Page Up Page Down z
Canon REALiS X600 | User Manual - Page 72
Canon REALiS X600 | User Manual - Page 73
SETTING UP FUNCTIONS FROM MENUS Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 74
. You can set them regardless of the input signal. * The menu items may differ depending on the input signal. The projector stores the settings for each input signal (8) and image mode (up to 5). Symbols Indicating Item Categories Menu items are classified into two categories, menu items
Canon REALiS X600 | User Manual - Page 75
This section provides the basic operation on the menu. 1 Press the [MENU] button. A menu window appears. z Press the [MENU] button again to close the menu window. 2 Press [] to select the appropriate tab. Press [ ] to move the cursor on the tab if it is not on it. Image adjustment tab (
Canon REALiS X600 | User Manual - Page 76
a slider Example: Contrast z In a different screen Example: Menu position Press [] to move the slider. Press the [OK] button to display a different screen. Then follow the instruction on the screen. 76
Canon REALiS X600 | User Manual - Page 77
SETTING UP FUNCTIONS FROM MENUS 5 Press the [OK] button. In some menu items, the setting is enabled just by making a selection. 6 Press the [MENU] button when you finish. The menu disappears. 77
Canon REALiS X600 | User Manual - Page 78
in its original size (no enlargement/reduction). Press the [MENU] button when you finish. z Circles may become out of round depending on the display resolution of the computer if Full screen is selected. z The upper, lower, left, and/or right portions of a projected image may be missing depending
Canon REALiS X600 | User Manual - Page 79
input signal type suitable for the computer from the displayed signal types. Press the [MENU] button when you finish. z See P118 for the signal types supported by this projector. SETTING UP FUNCTIONS FROM MENUS 79
Canon REALiS X600 | User Manual - Page 80
the [Auto] mode. NTSC4.43 PAL-M PAL-N Press the [MENU] button when you finish. z Confirm the input signal type according to the User's Manual that came with the AV equipment connected. Auto 1080i 1035i 720p 575p Selects the component format automatically according to the input signal. Select
Canon REALiS X600 | User Manual - Page 81
Setting Display Status from the Display Settings Menu Adjusting the Total Number of Dots [Total dots] ANALOG PC You can adjust the total number of dots in the horizontal direction. Adjusting the Tracking [Tracking] ANALOG PC You can adjust the tracking when the projected image flickers due to a
Canon REALiS X600 | User Manual - Page 82
Adjusting the Horizontal Position [Horizontal position] ANALOG PC You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. Adjusting the Vertical Position [Vertical position] ANALOG PC You can adjust the vertical position of the screen
Canon REALiS X600 | User Manual - Page 83
Setting Display Status from the Display Settings Menu Adjusting the Number of Horizontal Pixels [Horizontal pixels] ANALOG PC You can adjust the number of the pixels in the horizontal direction if the length of the screen is too long or too short in the horizontal direction. Adjusting the Number
Canon REALiS X600 | User Manual - Page 84
Performing Progressive Processing [Progressive] COMP. VIDEO/S-VIDEO You can use the progressive processing function if you want to project a high-quality video image. Selecting a Menu Position [Menu position] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can select the position
Canon REALiS X600 | User Manual - Page 85
make this setting if you want to hang the projector from the ceiling or project an image on a this if you project an image with the projector hung from the ceiling. The projected image is project an image from behind the screen with the projector hung from the ceiling. The projected image is inverted
Canon REALiS X600 | User Manual - Page 86
User screen settings T Logo capture < SETTING UP FUNCTIONS FROM MENUS Normal Greenboard Adjust Projects an image in a color tone similar to that of natural light setting is inadequate. < If you manually adjust it, press [ ] or z Select [User logo] on the [Projector on], [No signal screen], or
Canon REALiS X600 | User Manual - Page 87
] if you have not captured a logo on the [Logo capture] screen. Black Displays no logo (black screen). Blue Displays no logo (blue background). User logo Displays a logo captured on the [Logo capture] screen. Press the [OK] button to confirm, and then press the [MENU] button. z You cannot
Canon REALiS X600 | User Manual - Page 88
logo] if you have not captured a logo on the [Logo capture] screen. Canon logo Skip User logo Displays the Canon logo captured at the factory. Projects an image immediately after turning on the projector. Displays a logo captured on the [Logo capture] screen. Press the [OK] button to confirm, and
Canon REALiS X600 | User Manual - Page 89
of a movie theater in a dark room. SX6 SX60 X600 Standard Presentation Movie&Photo AdobeRGB sRGB Standard Presentation Movie Home Cinema (brightness, contrast, etc.) for each image mode as you wish. z The projector stores the image quality settings for each input signal (8) and image mode (up
Canon REALiS X600 | User Manual - Page 90
Adjusting the Brightness [Brightness] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can adjust the brightness of an image when it is too bright or dark. T Image adj. T Brightness Adjusting the Contrast [Contrast] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You
Canon REALiS X600 | User Manual - Page 91
. z This setting is saved for the currently selected input signal and image mode. > Makes dark and obscure portions of an image visible. < Makes light and obscure portions of an image visible. Press the [MENU] button when you finish. z This setting is saved for the currently selected input
Canon REALiS X600 | User Manual - Page 92
Making Color Adjustment (1) [Color adjustment] DIGITAL PC ANALOG PC DIGITAL VIDEO SCART You can make color adjustment for each color (red, green, and blue). Making Color Adjustment (2) [Color adjustment] VIDEO/S-VIDEO COMP. You can adjust color level and color balance and make color adjustment
Canon REALiS X600 | User Manual - Page 93
Color Adjustment (1) [Dynamic gamma] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can adjust the gradation representation of light and dark portions of an image automatically. Making Advanced Color Adjustment (2) [Mem. color correct] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP
Canon REALiS X600 | User Manual - Page 94
brightness and the fan noise. Press the [OK] button to confirm, and then press the [MENU] button. z You can reduce the power consumption of the lamp if you select in the quiet mode. z This setting is saved for the currently selected input signal and image mode. < SETTING UP FUNCTIONS FROM MENUS
Canon REALiS X600 | User Manual - Page 95
Resets the image settings. Cancel Cancels resetting of the image settings. Press the [OK] button to confirm, and then press the [MENU] button. z The projector stores the image settings for each input signal (8) and image mode (up to 5) separately. If you select [OK], the settings saved for the
Canon REALiS X600 | User Manual - Page 96
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can turn off the lamp or projector automatically for saving power. T System settings T Auto setup T you can check which functions are enabled/disabled (P41, 60). z You can manually adjust each item. [Auto focus]: [FOCUS] button (P46) [Auto keystone]:
Canon REALiS X600 | User Manual - Page 97
press the [MENU] button. z Wait at least 5 minutes before turning on the projector when you turn off the projector with the direct power on function. It may shorten the lamp life if you turn on the projector immediately after turning it off. z Set the previous [Power management mode] to [Standby
Canon REALiS X600 | User Manual - Page 98
from the AC outlet after the projection, and then insert the power plug while holding down the [OK] button until the projector beeps. 98 English Germany French Italian Spanish Portuguese Swedish Russian Dutch Finnish Norwegian Turkish Polish Hungarian Czech Danish Simplified Chinese Traditional
Canon REALiS X600 | User Manual - Page 99
PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can enable/disable the guide message showing how to use the projector. T System settings T Guide Off Disables the guide message. On Enables the guide message. Press the [OK] button to confirm, and then press the [MENU] button. z The
Canon REALiS X600 | User Manual - Page 100
effect the POWER indicator or WARNING lamp. Ch1 Selects the channel on the projector you use. Ch2 Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Channel on the Remote Control Press the [LIGHT
Canon REALiS X600 | User Manual - Page 101
time you turn on the projector. T System settings T Other settings T Password settings F Projects a full range digital signal. L Projects a limited range digital sig- nal. Press the [OK] button to confirm, and then press the [MENU] button. z Refer to the User's Manual that came with the AV
Canon REALiS X600 | User Manual - Page 102
[Register password] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can register a password that you need to enter when turning on the projector. Resetting the Lamp Counter [Lamp counter] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can reset the
Canon REALiS X600 | User Manual - Page 103
System settings T Other settings T Factory defaults OK Cancel Resets the projector's menu item settings. Cancels resetting the menu item settings. Press confirm, and then press the [MENU] button. z The settings of [Lamp counter], [Language] and [Remote control] will not be reset even after
Canon REALiS X600 | User Manual - Page 104
Canon REALiS X600 | User Manual - Page 105
MAINTENANCE Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 106
z Never use volatile cleaning liquid or benzine, as these may damage the finish of the projector. When using a chemical dust cloth, make sure to read the instructions thoroughly. z When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is
Canon REALiS X600 | User Manual - Page 107
or injury due to the high-voltage parts or rotating parts. Cleaning the Air Filter Turn the projector upside down, remove the cover by pushing the latch, remove the air filter, and clean it . z Replace the air filter whenever you replace the lamp. z An air filter can be ordered from your dealer. 107
Canon REALiS X600 | User Manual - Page 108
explode if it is scratched or shocked. z Do not remove screws unless specified. Replacing Lamp This projector uses the following lamp. Lamp type No. SX6/X600: RS-LP02 SX60: RS-LP03 z Be sure to use the specified lamp. z A lamp can be ordered from your dealer or Canon home page. MAINTENANCE 108
Canon REALiS X600 | User Manual - Page 109
, pull up the handle, and Handle then remove the lamp. 4 Fully insert a new lamp and secure it with two screws. * After the installation, be sure to push down the handle. Lamp 5 Replace the lamp cover and tighten the screw. 6 Turn on the projector. 7 Bring up the menu and select [System set- tings
Canon REALiS X600 | User Manual - Page 110
Canon REALiS X600 | User Manual - Page 111
TROUBLESHOOTING Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 112
Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red when there is a trouble in the projector. z Turn off the projector, wait until the cooling fan stops, and remove the power plug from the AC outlet before dealing with the trouble. Flash Pattern One
Canon REALiS X600 | User Manual - Page 113
POWER] button again off. (P53). The safety device has activated because you put the projector in the carrying bag during the cooling fan was rotating. You cannot release the safety due to the prob- Turn on the projector and computer in this order again. lem in the computer. TROUBLESHOOTING 113
Canon REALiS X600 | User Manual - Page 114
high-temperature place, condensation may form on the lens. The condensation will evaporate a while later and the projector will be able to project a normal image. The lens is stained. Clean up the lens (P106 . the [Image flip H/V] setting in the [Display settings] menu (P85). TROUBLESHOOTING 114
Canon REALiS X600 | User Manual - Page 115
the notebook computer. The output setting method varies among computer manufacturers. For more detailed information, refer to the User's Manual that came with your computer. The projector is forced to be turned off. Cause Countermeasure The air intake or exhaust vent is blocked. Check whether
Canon REALiS X600 | User Manual - Page 116
infrared remote receiver of the projector is trol under an inappropriate operat- exposed to direct sunlight or strong light of lighting apparatus ing environment. (P26). not recognized due Turn on the projector and computer in this order again. to a problem in the computer. TROUBLESHOOTING 116
Canon REALiS X600 | User Manual - Page 117
APPENDIX Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index
Canon REALiS X600 | User Manual - Page 118
.06 75.08 75.08 Signal type D-VGA D-SVGA D-XGA D-SXGA* D-SXGA+* Resolution (dots) 640 x 480 800 x 600 1024 x 768 1280 x 1024 1400 x Interlaced signal - The specifications in the table above are sub- ject to change without prior notice. - This projector does not support any computer signal of which
Canon REALiS X600 | User Manual - Page 119
Relationship between Screen Size and Projecting Distance Screen size at 4:3 aspect ratio Type - W x D (cm) 40" 81 x 61 50" 102 x 76 60" 122 x 91 70" 142 x 107 80" 163 x 122 90" 183 x 137 100" 203 x 152 110" 224 x 168 120" 244 x 183 130" 264 x 198 140" 284 x 213 150" 305 x 229 160" 325 x 244 170"
Canon REALiS X600 | User Manual - Page 120
user. You can adjust color balance and color level for 6 axis of RGB (red/ green/blue) and CMY (cyan/magenta/yellow) of the projected image to make a fine color adjustment. You can perform the 6axis color adjustment in the image adjustment menu. AdobeRGB (P50, 89) A color space specification
Canon REALiS X600 | User Manual - Page 121
are too light or dark. This projector supports manual gamma correction X600, you can project digital contents copy-protected with the HDCP technology. To project the contents, connect the Input Terminal-1 on the projector interlace signal, deteriorating the vertical resolution of the image. When the
Canon REALiS X600 | User Manual - Page 122
of color representation (color space) which is applied to general digital cameras, displays and others. In SX6/SX60/X600, if you select [sRGB] in the [Image mode] setting, the projector can project the best-quality image conforming to the sRGB Standard. S-video (P25, 57, 80) A signal system (YC
Canon REALiS X600 | User Manual - Page 123
Specifications Projector Model name SX6/SX60/X600 Light source SX6/X600: 270W high-pressure lamp, SX60: 180W high-pressure lamp terminal For mouse control (USB type B) SERVICE PORT RS-232C (mini DIN 8-pin) User's Manual, Quick Start Guide, and Warranty Card. * 99.99% or more of the LCD panel
Canon REALiS X600 | User Manual - Page 124
.) 6 Ground (R) 7 Ground (G) 8 Ground (B) 9 +5 V power 10 Ground (Vertical sync.) 11 Monitor ID0 12 DDC data 13 Horizontal sync. 14 Vertical sync. 15 DDC clock z The terminal specifications for the analog PC-2 input and component input are the same. 124
Canon REALiS X600 | User Manual - Page 125
91 Guide 99 Lamp counter 102 Lamp mode 94 Lamp replacement 102, 108 Language 36, 98 LED illumination 100 Lens cap 19 Logo capture 86 Logo position 87 M Mem. color correct 93 Menu 74 Menu position 84 Mouse operation 70 MUTE 66 N NO SHOW 66, 88 No signal screen 87 O Output resolution
Canon REALiS X600 | User Manual - Page 126
28, 119 Projector installation 13, 29 Projector on 88 P-TIMER 68 R Rear projection 29, 85 Register password 102 Remote control 22, 26, 100 Reset 95 Resolution 52 S Screen position 82 VOL 67 Volume adjustment 67 W WARNING lamp 24, 112 Z Zoom (image size 37 Zooming 69 126 INDEX
Canon REALiS X600 | User Manual - Page 127
Options z Lamp Part No. SX6/X600:RS-LP02 SX60: RS-LP03 z Ceiling mounting bracket Part No: RS- used to hang the projector from a ceiling. ** This part is used to join the ceiling pipe with the ceiling mounting bracket. For more detailed information, refer to the instruction manual that comes with
Canon REALiS X600 | User Manual - Page 128
Logo position Upper L P87 Upper R Center * Lower L Lower R No signal screen Black P87 Blue * User logo NO SHOW Black * P88 Blue User logo Projector on Canon logo * P88 Skip User logo Return Input signal settings ANALOG PC Total dots P81 Tracking P81 Horizontal position
Canon REALiS X600 | User Manual - Page 129
Standard * P89 Presentation Movie (SX60/X600) Movie&Photo (SX6) AdobeRGB (SX6 H 6-axis color adjust Off * P94 Adjust Hue/Saturation Return Lamp mode Normal P94 Quiet Reset OK/Cancel P95 The System settings Traditional) Finnish Korean Norwegian Japanese Guide Off P99 On * LED
Canon REALiS X600 | User Manual - Page 130
-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC. 703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A. CANON MEXICANA, S. de R.L. de C.V. Boulevard Manuel