Canon SD200 Software Starter Guide (For the Canon Digital Camera Solution Disk
Canon SD200 - PowerShot Digital ELPH Camera Manual
UPC - 013803044003
View all Canon SD200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon SD200 manual content summary:
- Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 1
Software Starter Guide For Version 21 ENGLISH Software Starter Guide (For the Canon Digital Camera Solution Disk Version 21) You must install the software bundled on the Canon Digital Camera Solution Disk before connecting the camera to the computer. Install the software. Connect the camera - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 2
data due to a mistaken operation or malfunction of the camera, the software, the CompactFlash™ cards (CF cards), personal computers, peripheral devices, or use of non-Canon CF cards. Trademark Acknowledgments • Canon and PowerShot are trademarks of Canon Inc. • ArcSoft, the ArcSoft logo, ArcSoft - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 3
or to more than one user. With respect to the sound and image data ("Data") contained in the Software, which are to be downloaded to the applicable Canon digital camera product, Canon grants you a personal, nonexclusive license to use the Data on a single Canon digital camera product only. YOU SHALL - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 4
, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT June 1995), all U.S. Government End Users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3chome, Ohta- - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 5
Remotely 41 Merging Panoramic Images - PhotoStitch 44 Enjoy Customizing Your Camera with the My Camera Settings ... 45 Using the Software on the Macintosh Platform - Preparations 49 Installing the Software 49 Using the Software on the Macintosh Platform - The Basics 51 Downloading Images - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 6
Software 84 Memory Card Folder Structure 87 Troubleshooting 88 Information about Your Camera 96 Information Common to All Models 96 PowerShot G6 98 PowerShot S70 98 PowerShot SD300 DIGITAL ELPH/DIGITAL IXUS 40 99 PowerShot SD200 DIGITAL ELPH/DIGITAL IXUS 30 99 PowerShot SD20 DIGITAL ELPH - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 7
the Canon Digital Camera Solution Disk. It also lists the computer system configurations required to use the software. About this Guide • The explanations in this guide are based on Windows XP and Mac OS X v10.3. If you are using another version of these operating systems, the actual screen contents - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 8
4 It's so Simple! Make Prints Right at Home Like a Pro It's so Simple! Make Prints Right at Home Like a Pro Shoot the images See your Camera User Guide for shooting instructions. Install the software on the computer Windows (p. 10) Macintosh (p. 49) Just install the software once at the beginning. - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 9
5 Connect the camera to the computer (p. 97) Download images to the computer Windows (p. 15) Macintosh (p. 51) Print the images Windows (p. 21) Macintosh (p. 55) - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 10
6 Unbounded Possibilities with Entertaining Software Unbounded Possibilities with Entertaining Software Print a Variety of Layouts Print with the diverse layouts available in PhotoRecord (Windows) and ImageBrowser (Macintosh). The examples shown are from PhotoRecord (Windows). Make your - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 11
Attachment Attach an image to an e-mail message by starting your mail software from within ZoomBrowser EX (Windows) or ImageBrowser (Macintosh). Operate the Camera Shutter from the Computer Release the camera's shutter from the computer with ZoomBrowser EX (Windows) or ImageBrowser (Macintosh). The - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 12
included on the Canon Digital Camera Solution Disk. • Macintosh software cannot be used on disks formatted in the UFS (Unix File System) format. Windows OS Computer Model CPU RAM Interface Free Hard Disk Space Display Windows 98 Second Edition (SE) Windows Me Windows 2000 Service Pack 4 Windows XP - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 13
X (v10.1.5-v10.3) The above OS should be pre-installed on computers with built-in USB ports. PowerPC G3/G4/G5 256 MB or more USB •Canon Utilities - ImageBrowser: - PhotoStitch: 200 MB or more 40 MB or more 1,024 x 768 pixels/32,000 Colors or better - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 14
before you connect the camera to the computer. Installing the Software and USB Driver Start by installing the software from the Canon Digital Camera Solution Disk. • You must install the software before you connect the camera to the computer. • Users of Windows XP and Windows 2000 must first log in - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 15
the [Setup.exe] icon. Some computers may not display the [.exe] file name extension as shown above. 4 Click the Digital Camera Software [Install] button. Installer Panel Follow any instructions to restart your computer, if they appear. If the following window appears, continue with the installation. - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 16
•Windows 2000/Windows 98 SE: Canon Camera TWAIN Driver •Windows Me: Canon Camera WIA Driver With Windows XP, the USB driver supplied with the Windows operating system is used so there is no need to install a USB driver. 7 Click [Yes] if you agree to all of the terms of the software license agreement - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 17
Disk from the CD-ROM drive yet. Users of Windows XP and Windows 2000 must log in as an Administrator ( screen appears after restarting. This concludes the software installation. Continue by connecting the camera to the computer so that the USB driver can be utilized. If you installed a USB driver - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 18
. See Using the Software on the Windows Platform - The Basics (p. 15) for the subsequent procedures. • See USB driver installation not proceeding well in the Troubleshooting section (p. 88) if you are having problems installing the USB driver. • See Uninstalling the USB Driver (p. 85) to delete - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 19
the camera or memory card images to check them before downloading or download them selectively. For instructions, see Checking Images before Downloading (p. 34). Camera to Computer Connection 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL Terminal. Prepare - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 20
and select [Programs] or [All Programs], followed by [Canon Utilities], [Camera Window] and [Camera Window]. 2 Download the images. Download the images using the camera or the computer. By default, the downloaded images are saved into the [My Pictures] folder. You can adjust the settings, such as - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 21
Transfer function, the Direct Transfer settings menu will appear in the LCD monitor. In addition, the (Print/Share) button will light if your camera is equipped with one. • See the Camera User Guide for instructions regarding Direct Transfer settings and procedures. Set the Direct Transfer settings - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 22
18 Downloading Images to the Computer By default, when downloading is complete, the thumbnails (tiny versions) of the downloaded images display in ZoomBrowser EX's Main Window. Thumbnail Shows the folder where the images are saved. Next, print out the images (p. 21). - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 23
. See the manual for the memory card for its connection and handling instructions. (2) Insert the loaded adapter into the slot. (1) Place the memory card in an adapter if required. The card adapter and memory card shape may vary according to the type of memory card your camera utilizes. 2 Select - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 24
will download to the [My Pictures] folder. • To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the image type to be downloaded. • See Memory Card Folder Structure (p. 87) for - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 25
utility program. See the program's [Help] menu for more details. • Movies cannot be printed. •With images shot by Exif 2.2 (called Exif Print) compatible cameras, shooting information such as the shooting settings and mode can be included with the images. This data is then used to correct the images - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 26
22 Printing Images 3 Click [2. Select Captions for Printing] and place a check mark beside the type of information that will be printed with the images. If you select [Date and Time], for example, you can print the images with their shooting dates and times included. You can add a comment to an - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 27
23 Full Page Print This option prints one image per page. 1 Click [2 Select Printer & Album Type]. Once you have chosen a printer, select [One Photo Per Page] or [One Photo Per Sheet] in the Album Type category. 2 Click [3 Select Paper] and select the paper size and orientation. 3 Click [4 Print], - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 28
the [Themes], [Backgrounds], [Photo Frames], [Text Frames] or [Clipart] button to switch between selections. Perform the procedures according to the instructions beside the symbol. • The [Themes] category provides consistent designs for use throughout an entire album. •You can also click [Add Titles - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 29
the ZoomBrowser EX basics. Once you have mastered them, try the advanced techniques. Using the Software on the Windows Platform - Advanced Techniques (p. 26). • A PDF-format manual for ZoomBrowser EX is also available. It provides further information about the program's features and procedures - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 30
explains various ZoomBrowser EX features. Proceed to this chapter once you have mastered the basic ZoomBrowser EX procedures in the Using the Software on the Windows Platform - The Basics chapter. The ZoomBrowser EX Windows This section describes the principal ZoomBrowser EX windows: the Main - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 31
clicking the [Tools] menu and selecting [View] and [Sort by]. • The following icons will display around images according to their attributes. Images shot with the camera's Stitch Assist mode RAW images Movies Images with sound memo attachments Protected images Images shot with the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 32
28 The ZoomBrowser EX Windows Display Mode • Selects the display style for the Browser Area. Zoom Mode Displays all the images in a folder as thumbnail images. This mode is convenient for searching for images since many can be displayed at once. If additional folders are nested within a folder, - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 33
29 Display Control Panel • This panel adjusts the display settings for the Browser Area. Selection Menu Display Size Use this to select or deselect all Changes the size of the thumbnail in the images in the Browser Area. the Browser Area. Show/Hide Image Information Menu Use this to display or - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 34
menu for red-eye reduction, color correction and cropping. You can also use it to start up other programs for editing. Split Screen Button Displays multiple images at once. This is handy for comparing images. Synchronize Button Synchronizes the display settings when multiple images are displayed - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 35
Displays detailed information about the shooting settings when the image was captured, such as the shutter speed or exposure setting. The camera model will determine what information is displayed. Protect Prevents an image from being overwritten or deleted. Comment You can type a comment - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 36
operations. Acquire Images Downloads images from the camera/memory card (p. 15, 19). Set to Camera Sets camera settings, such as the My Camera settings (p. 45), or Slide Show/DPOF settings. It also uploads images from the computer to the camera/memory card. Remote Shooting Allows you to operate the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 37
Shooting Properties Allows you to select the necessary data from the shooting information and export it as a text file. Export as a Screen Saver Exports the image as a screen saver file. Export as a Wallpaper Exports the image as a wallpaper file. Backup to CD Copies images to a CD-R/RW disk for - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 38
or memory card will display in the Camera Browser Window as thumbnails (tiny images). Camera Browser Window Thumbnail 3 Select images to download. To select multiple images, click on the first image and then hold the [Ctrl] key down while clicking on successive images. 4 Click [Download pictures]. - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 39
of USB Driver Not Required) Your camera uses a standard image transfer protocol called Picture Transfer Users leaflet for details. * Windows Me (with the USB driver installed) Easily download images using the Scanners and Cameras Wizard or Windows Explorer. All you need do is connect the camera - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 40
Canon Digital Camera Solution Disk in the CD-ROM drive. If the installer panel fails to appear automatically, display it using the procedures in the How to Display the Installer Panel section (p. 11). 2 Click the QuickTime [Install] button. Follow the onscreen instructions not support this - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 41
the left of the window to edit the movie and save it. Follow these steps to proceed. Click this button for detailed operational instructions. Instructions Click this button to play the movie being edited. Storyboard Area Displays thumbnails of the selected images. Links images in order from left - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 42
to a standard file format (TIFF or JPEG). • See Information about Your Camera (p. 96) to determine whether your camera model supports this function. • See the Camera User Guide for information about the camera settings for shooting RAW images. Procedures for Converting RAW Images 1 Select a RAW - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 43
Quality Adjustment Window. The available settings may vary depending on the camera used. This section adjusts the white balance according to the light source and color temperature. This section adjusts the digital exposure compensation, photo effect, contrast, sharpness, and saturation. Tone Curve - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 44
Film. Furthermore, you can add your own color schemes (My Color) to apply to other RAW images when they are being converted. See the PDF manual for ZoomBrowser EX for more information (p. 2). - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 45
and for high volume photography without worrying about filling the camera's memory card. Preparing for Remote Shooting 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL terminal and place the camera in the correct mode for connecting. • Methods for connecting - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 46
the viewfinder display. Refresh Button Resets the exposure, focus and white balance. Set the basic camera settings here. • The settings available in the RemoteCapture Task window vary between camera models. • RemoteCapture Task locks the exposure and focus settings for the subject matter in the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 47
the image size or resolution, the rotation settings and the settings at the bottom of the window as required. If you intend to hold the camera vertically to photograph a subject, you can save the image to the computer with the correct orientation if you set the rotation settings in advance. If - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 48
Symbol displayed by images shot in Stitch Assist mode. • See the Camera User Guide for information about shooting in Stitch Assist mode. • Images shot in Browser Area. 3 Click [2. Open PhotoStitch]. Instructions 4 Merge the images following the instructions in the guidance panel at the top of the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 49
. This topic explains how to upload the My Camera settings saved onto your computer to the camera and vice versa. Displaying the My Camera Window 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL terminal and place the camera in the correct mode for connecting - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 50
animal in the start-up image and animal calls in each of the sound files. The names of the prepared files for the various My Camera settings themes all begin with the same root name. The start-up image and sound files in the "Animal" theme, for example, all begin with - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 51
be overwritten. Repeat steps 1-3 as required. To use this data on the camera, change the start-up image and sound settings on the camera itself. Please see the Camera User Guide for these instructions. Saving the Camera's My Camera Settings to the Computer 1 Select the [Setup as a theme] tab in the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 52
will display. 2 Select the [Set individually] tab in the My Camera window and click the [Create a My Camera Sound] button. The My Camera Sound Maker program will start. 3 Create a file following the instructions in the guidance panel. Instructions 4 Click once you have saved the sound file to close - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 53
Read this material before you connect the camera to the computer for the first time. Installing the Software Start by installing the software from the Canon Digital Camera Solution Disk. Items to Prepare • Your camera and computer • Canon Digital Camera Solution Disk • Interface cable supplied with - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 54
individually for installation. 6 Click [Agree] if you agree to all of the terms of the software license agreement. 7 Review the installation settings and click [Next]. Follow the onscreen instructions to proceed. 8 When the installation is over, click [OK]. 9 Click [Exit] in the installer panel - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 55
are more than approximately 1000 images in the camera. Use a memory card reader to download in that case. You can also display an index of the camera or memory card images to check them before downloading or download them selectively. For instructions, see Checking Images before Downloading (p. 66 - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 56
Canon Utilities] and [CameraWindow] folders. 3. Close Image Capture. 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL Terminal. Prepare the camera to the [Pictures] folder. • To download images that have had their transfer settings set with the camera, click [ - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 57
loaded adapter into the slot. (1) Place the memory card in an adapter if required. The card adapter and memory card shape may vary according to the type of memory card your camera utilizes. The Camera Control Window will appear. Double-click the [Canon CameraWindow] icon on the desktop if it does - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 58
will download to the [Pictures] folder. • To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the type of image for downloading. • See Memory Card Folder Structure (p. 87) for - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 59
55 Printing Images Printing 1 Select the images to print. Clicking on an image selects it and displays a blue frame around it. To select multiple images, hold down the [shift] or [ ] (command) key while clicking on images. Movie images cannot be printed. 2 Click the [Print] button and select [ - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 60
information by selecting [Index printing] in the Layout Options dialog. • Images shot with Exif 2.2-compliant cameras (Exif Print) incorporate information about the shooting settings, such as the camera modes and settings. Better prints can be made by using this information to correct the image. To - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 61
explained the ImageBrowser basics. Once you have mastered them, try the advanced techniques. Using the Software on the Macintosh Platform - Advanced Techniques (p. 58). A PDF-format manual for ImageBrowser is also available. It provides further information about the program's features and procedures - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 62
explains various ImageBrowser features. Proceed to this chapter once you have mastered the basic ImageBrowser procedures in the Using the Software on the Macintosh Platform - The Basics chapter. The ImageBrowser Windows This section describes the principal ImageBrowser windows: the Browser Window - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 63
] keys down while clicking on the last image. • The following types of icon will display around images according to their attributes. Images shot with the camera's Stitch Assist mode RAW images Movies Images with sound memo attachments Protected images Images shot with the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 64
60 The ImageBrowser Windows Display Mode • Selects the display style for the Browser Area. Preview This mode displays the image at a larger size as well as the image information. List Displays the images in the folder selected in the Explorer Panel section in rows and columns. TimeTunnel Displays - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 65
61 Display Control Panel • This panel adjusts the display settings for the Browser Area. Display Size Changes the size of the thumbnail in the Browser Area. Selection Menu Use this to select or deselect all the images in the Browser Area. Filter Images This feature filters your images by their - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 66
can also use it to start up other programs for editing. Star Ratings Menu Sets the Star Rating for an image. Full Screen Button Displays the image in the full screen mode. Click the image or press any key on the keyboard to restore the normal display mode. Synchronize Button Synchronizes the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 67
between images. Shooting Information Displays detailed information about the shooting settings when the image was captured, such as the shutter speed or exposure setting. The camera model will determine what information is displayed. - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 68
ImageBrowser features. Control Panel Features Canon Camera Opens the Camera Control Window, which lets you perform the following operations. Acquire Images Downloads images from the camera/memory card (p. 51, 53). Set to Camera Sets camera settings, such as the My Camera settings (p. 76), or Slide - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 69
the file. •Export Shooting Properties: allows you to export the shooting properties as a text file. •Export as a Screensaver: Exports the image as a screen saver file. •Export an Image as Wallpaper: Exports the image as a wallpaper file. Organize Images: [File] menu, [Organize Image] •Sort Images - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 70
Control Window will display. 2 Click [Lets you select and download images]. The images in the camera or memory card will display in the Camera Browser Window as thumbnails (tiny images). Camera Browser Window Thumbnail 3 Select images to download. To select multiple images, click on the first image - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 71
the Browser Area or Explorer Panel in ImageBrowser. Other Downloading Methods Your digital camera employs a standard image transfer protocol called Picture Transfer Protocol (PTP). With PTP, you can use the programs supplied as standard software with Mac OS X, such as iPhoto or Image Capture, to - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 72
68 Replaying Movies Replaying Movies 1 Double-click an image with a movie icon in ImageBrowser's Browser Area. The movie will appear in the Viewer Window. Movie icon 2 Click the [Play] button. - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 73
steps displayed in the middle of the window to edit the movie and save it. Follow these steps to proceed. Instructions Click this button for detailed operational instructions. Click this button to play the movie being edited. Storyboard Area Displays thumbnails of the selected images. Links images - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 74
image file formats, such as TIFF or JPEG. • See Information about Your Camera (p. 96) to determine whether your camera model supports this function. • See the Camera User Guide for information about the camera settings for shooting RAW images. Procedures for Converting RAW Images 1 Select a RAW - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 75
vary depending on the camera used. This section adjusts the white balance according to the light source and color temperature. This section adjusts the digital exposure compensation, photo RAW images when they are being converted. See the PDF manual for ImageBrowser for more information (p. 2). - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 76
for high volume photography without worrying about filling the camera's memory card. Preparing for Remote Shooting 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL terminal and place the camera in the correct mode for connecting. • Procedures for attaching - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 77
captured. Rotation Settings Sets the rotation parameters for images after they are captured. Release Button Releases the shutter. Slide this to zoom the camera in or out. Start/Stop Viewfinder Button Starts or stops the viewfinder display. Refresh Button Resets the exposure, focus and white balance - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 78
the image size or resolution, the rotation settings and the settings at the bottom of the window as required. If you intend to hold the camera vertically to photograph a subject, you can save the image to the computer with the correct orientation if you set the rotation settings in advance. If - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 79
Symbol displayed by images shot in Stitch Assist mode. • See the Camera User Guide for information about shooting in Stitch Assist mode. • Images shot in the [Edit] menu and select [PhotoStitch]. Instructions 3 Merge the images following the instructions in the guidance panel at the top of the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 80
. This topic explains how to upload the My Camera settings saved onto your computer to the camera and vice versa. Displaying the My Camera Window 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL terminal and place the camera in the correct mode for connecting - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 81
settings type. Displays the list of settings files saved onto the computer. Save to Camera Save to Computer Play Button Plays the audio from the settings file in the camera. Displays the settings in the camera. Add Button Adds the settings file to the list. Delete Button Deletes a settings file - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 82
concludes the process of saving the My Camera settings to the camera. To use this data on the camera, change the start-up image and sound settings on the camera itself. Please see the Camera User Guide for these instructions. Saving the Camera's My Camera Settings to the Computer 1 Select the type - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 83
format at a size of (w) 320 x (h) 240 pixels. 1 Open the My Camera window, select [Start-up Image] from the Type list box. 2 Click the [ in the WAV format. • The following chart shows standard time lengths for My Camera Sounds. Type Duration in Seconds 11.025 kHz 8.000 kHz Start-Up Sound 1.0 - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 84
It also explains how to uninstall the programs. Read the Troubleshooting section in this chapter if you experience a problem using the programs. About the CD-ROMs Supplied with the Solution Disk Apart from the Canon Digital Camera Solution Disk, additional CD-ROMs containing image editing programs - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 85
movies. Installing ArcSoft Camera Suite 2.1 Windows 1 Close all programs that are running. 2 Place the ArcSoft Camera Suite CD-ROM select [Open], and double-click the [Setup.exe] icon . Windows 2000, Windows Me and Windows 98 users should double-click the [My Computer] icon on the desktop, double- - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 86
Camera Suite 1.3 CD-ROM This CD-ROM contains the following programs. A [ ] symbol indicates it is supported, a [ ] symbol that it is not. Compatible Operating System Program Windows Macintosh 98 Me 2000 Setup.exe] icon . Windows 2000, Windows Me and Windows 98 users should double-click the [My - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 87
the installation is complete. Starting the ArcSoft Camera Suite Software The Arcsoft Camera Suite software can be started from ZoomBrowser EX (Windows) [Start Application], followed by [VideoImpression]. Manual for the ArcSoft Camera Suite See inside the [Manuals] folder on each CD-ROM for the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 88
fix corrupted files. Uninstalling the Software (Windows) Software Installed from the Canon Digital Camera Solution Disk This explanation uses menu and select [Programs] or [All Programs], followed by [Canon Utilities], [CameraWindow], [PowerShot - IXYIXUS - DV] and [CameraWindow Uninstall]. 2. Click - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 89
to uninstall the USB driver with Windows XP. 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL Terminal. Prepare the camera for communication with the computer. For interface cable connection instructions, see Information about Your Camera (p. 96). 2 Click the - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 90
the Software 5 Delete your camera model name or [Canon Camera] in the [Scanners and Cameras Properties] dialog. Windows Me users should delete their camera model or [Canon Camera] in the [Scanners and Cameras] folder. Windows 2000/Windows 98 SE Select your camera model name or [Canon Camera] and - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 91
87 Memory Card Folder Structure The images on a memory card are placed in the [DCIM] folder in subfolders labeled the THM extension are the thumbnail image files for the camera's index replay mode. • The "xxxx" in file names represent four-digit numbers. • **Each successive file shot in Stitch Assist - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 92
Troubleshooting Please read this section if you encounter a problem using the software. Start by Checking This Investigate the following points first if you encounter a problem. Does your computer satisfy the requirements listed in the System Requirements section (p. 8)? Is the camera - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 93
on the previous page and resolve the problem. Images won't download into a TWAIN-compliant program (Camera and computer connected via interface cable (Windows 2000, Windows 98 SE)). Click the [Finish] button in the Camera Control Window to close it. Camera not detected, Events dialog won't display - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 94
2000 Users of Windows XP and Windows 2000 must first log in as an Administrator (computer system administrator) to delete a driver. Check to see if the camera for the problem if the "Other devices" or "Imaging devices" categories do not appear or your camera model name or [Canon Camera] does not - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 95
types] if it is present. 5. Click [OK] to close the dialog. This will make the hidden files and folders visible. 8. Look for files for Canon digital cameras that start with [CAP*]. The "*" represents a number, such as 0 or 1. [CAP*] files come in pairs of [CAP*.inf] and [CAP*.pnf] files (For example - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 96
Troubleshooting 9. Double-click the [CAP*] files to check their contents. Double-clicking an [CAP*.inf] file will open it in the Windows Notepad program. Look for [;****Canon Camera Driver the [CAP*.inf] and [CAP*.pnf] file for Canon digital cameras that you noted down in Step 9. The Inf folder - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 97
for the problem if the "Other devices" or "Imaging devices" categories do not appear or your camera model name or [Canon Camera] does not appear. Proceed to Step 6, temporarily quit the procedures and investigate the other potential causes. 4. Select your camera model name or [Canon Camera] and - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 98
the wrong files, you may be unable to restart Windows. Reinstall the driver 11.Reinstall the driver with the procedures in Installing the Software and USB Driver (p. 10). Zooming Images in ZoomBrowser EX is Slow or Not Working Some graphics cards or settings may cause the display of zoomed images in - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 99
folder to start this utility. 3. Select the database file you were using up to this point and click the [Start] button. (e.g. C:\Program Files\Canon\ZoomBrowser EX\Database\My Database.zbd) This will display the titles and comments input in the earlier versions in the comments section of ZoomBrowser - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 100
Operating Systems The CD-ROM labeled "Canon Digital Camera Solution Disk" is provided with all models. It contains the following programs. Program ZoomBrowser EX ImageBrowser TWAIN Driver WIA Driver PhotoRecord PhotoStitch 98 SE Compatible Operating System Windows Macintosh Me 2000 XP OS X - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 101
Ensure that you have installed the software from the supplied Canon Digital Camera Solution Disk before you connect the camera to the computer. Item to Prepare • Your camera and computer • Canon Digital Camera Solution Disk • Interface cable supplied with the camera • Use the interface cable to - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 102
Package •Canon Digital Camera Solution Disk •ArcSoft Camera Suite 2.1 See ArcSoft Camera Suite 2.1 CD-ROM (p. 80) for information about the features and installation procedures for the programs on the disk. Non-Supported Programs and Features All programs and features are supported. PowerShot S70 - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 103
procedures for the programs on the disk. Non-Supported Programs and Features • The camera does not record RAW images. • The camera shutter cannot be controlled from a computer. PowerShot SD20 DIGITAL ELPH/DIGITAL IXUS i5 How to Connect the Camera to a Computer and Prepare to Transfer Data 1 Attach - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 104
about Your Camera 96 Installer Panel Macintosh 49 Windows 11 Installing Software Macintosh 49 USB Driver 10 Windows 10 K Keyword Macintosh Windows 63 31 L Layout and Print Macintosh 56 Windows 24 Layout Options Dialog 55 M Main Window 26 Memory Card Folder Structure 87 Memory Card Reader - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 105
My Camera Settings Macintosh 76 Windows 45 O Operating the Shutter Remotely 7 Macintosh 72 Windows 41 P PDF Manuals 2 PhotoRecord 6, 21 PhotoStitch 6 Macintosh 75 Windows 44 PowerShot G6 98 PowerShot S70 98 PowerShot SD20 DIGITAL ELPH 99 PowerShot SD200 DIGITAL ELPH 99 PowerShot SD300 DIGITAL ELPH - Canon SD200 | Software Starter Guide (For the Canon Digital Camera Solution Disk - Page 106
102 MEMO
Windows
Macintosh
p. 10
p. 49
• This guide explains how to install the software programs and
briefly introduces their functions and operating procedures.
•
Please read the software license agreement in this guide before
using the software. By using the software, you agree to be
bound by the terms of the agreement.
Software Starter Guide
(For the Canon Digital Camera Solution Disk Version 21)
CDI-E160-010
xx04xxxx
© 2004 CANON INC.
PRINTED IN JAPAN
ENGLISH
Windows/Macintosh
Windows
Macintosh
Software Starter Guide For Version 21
You must install the software bundled on the Canon
Digital Camera Solution Disk before connecting the
camera to the computer.
Install the software.
Connect the camera
to the computer.