Canon VB-C500D NETWORK CAMERA VB-C500VD/C500D Start Guide
Canon VB-C500D Manual
 |
View all Canon VB-C500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon VB-C500D manual content summary:
- Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 1
NETWORK CAMERA Start Guide Please read carefully Start Guide and the Operation Guide. Especially be sure to read "Safety Precautions" before using the network camera. Keep this guide in a readily accessible location for future reference. - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 2
Thank you for purchasing Canon Network Camera VB-C500VD/VB-C500D (hereafter referred to as VB-C500VD/VB-C500D). This Start Guide describes how to set up and install the VB-C500VD/VB-C500D. The detailed procedures for using the VB-C500VD/VB-C500D are explained in the Operation Guide provided on the - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 3
VB-C500VD/ VB-C500D, confirm the law or regulation of the country or region where the camera is used. Trademark Notice Canon and the Canon logo are registered trademarks of Canon other factors may cause problems, such as recording failure, recorded data corruption or loss. Canon shall have no - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 4
agreement for bundled software. Software Type VB Initial Setting Tool, VBAdmin Tools Network Video Recorder VK-Lite File Name an authorized one-for-one basis when you buy a new similar product or to an authorized waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 5
is granted or implied for any other use for MPEG-4 standard. Open Source Software The product (VB-C500VD/VB-C500D and bundled VK-Lite Viewer) contains Open Source Software modules. See OpenSourceSoftware.pdf on the bundled Setup CD-ROM for details. Each module's license conditions are also available - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 6
xvi Chapter 1 Before Use Features of VB-C500VD/VB-C500D 1-2 Bundled Software 1-5 VB Initial Setting Tool Ver. 5.0.1 1-5 VBAdmin Tools Ver. 5.1 1-5 VB-C500 Viewer Ver. 1.1 1-6 Network Video Recorder VK-Lite v2.2 1-6 Operating Environment 1-11 VB Initial Setting Tool Ver. 5.0.1, VBAdmin Tools - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 7
the Camera 2-15 Installation Procedure for Direct Mounting on a Ceiling/Wall 2-16 Installation Procedure for In-Ceiling with a Ceiling/Wall 2-27 Chapter 3 Appendix External Dimensions 3-2 VB-C500VD ...3-2 VB-C500VD/VB-C500D 3-3 Recessed Mounting Kit SR500-S-VB (Option 3-3 Main Specifications - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 8
contact the store where you purchased the product. 1. VB-C500VD/VB-C500D main unit 2. Safety Wire 3. Ceiling Mount Template 4. Setup CD-ROM 5. Dome Case Lock Screw Wrench (VB-C500VD only) 6. Screw Caps (VB-C500VD only) 7. Start Guide (This document) 8. Warranty Card (different depending on the - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 9
, installation method, initial setting of the camera, etc., are explained. Operation Guide (VBC500OG_E.pdf) This document explains the basic setup procedure for the VB-C500VD/VB-C500D, how to use VBAdmin Tools and VB-C500 Viewer, troubleshooting, etc. Operation Guide can be found on the Setup CD - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 10
How to Read This Document In Start Guide and Operation Guide, screens in Windows Vista are mainly used. sure to observe this precaution to use the product safely. Inappropriate handling against the instruction accompanied by this symbol may result in injury. Be sure to observe this precaution - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 11
instruction manual to make sure that your VB-C500VD/VB-C500D is compatible with this adapter. • The socket-outlet should be installed near the equipment and should be easily accessible. • Unplug the equipment from the wall outlet before cleaning or maintaining. FDA regulation This Network Camera - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 12
Network Camera, Model Name: VB-C500VD/VB-C500D This installed and used in accordance with the instructions, may cause harmful interference to radio manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 13
screws for rusting and loosening. • Do not install the VB-C500VD/VB-C500D to the place with strong vibration. • Do not install the VB-C500VD/VB-C500D on the uneven, inclined, or other unstable surface. • (VB-C500VD) Do not install the network camera to the place where is not strong enough or where - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 14
is detected, immediately stop using the camera and contact your nearest Canon dealer. Continuing to use the product network environment, and thus high image transmission accuracy cannot be assured. Canon will assume no liability for any accident or damage resulting from use of the VB-C500VD/VB-C500D - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 15
is constantly required. These are support functions for monitoring. They do not as accurately as expected under certain conditions. Canon will assume no liability for any accident or electric shock may result. Be sure to read the operation manual for PA-V17 before use. Notes on Cleaning Warning • - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 16
the dome case, referring to "Installation Procedure for Direct Mounting on a Ceiling/Wall" ( P. 2-16) in "Chapter 2 Initial Setting and Installation of Camera". 2. Dampen a soft cloth with water or diluted neutral detergent and wipe the soiled areas gently. 3. Wipe with a dry cloth. 4. When you - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 17
Before Use The following explains the features of this camera, bundled software, operating environment, and name and function of each part. - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 18
VB-C500VD/VB-C500D The VB-C500VD/VB-C500D is a compact network camera for indoor installation integrating camera and server features. Shock resistant materials and mechanism (VB-C500VD)* The VB 4x), the VB-C500VD/VB-C500D achieves video quality, the camera can capture and Canon's the camera, so - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 19
The VB-C500VD/VB-C500D supports Power over Ethernet (PoE*) technology, which enables simultaneous video/audio data transmission and power supply by simply connecting a PoE HUB and a single LAN cable ( P. 2-6). When connecting to a PoE HUB, you need not 1 connect a power adapter to the camera or - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 20
communication. VB-C500 Viewer only supports audio reception. Small-scale Video Monitoring by Simplified Recording Software VK-Lite This product comes with a simplifier version VK-Lite of the optional Network Video Recorder VK-64/VK-16 v2.2 ( P. 1-6). Video captured by up to four cameras is recorded - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 21
VB-C500VD/VB-C500D. It is installed from Setup CD-ROM ( P. 2-4). Users other than Administrators need not install this tool. VBAdmin Tools Ver. 5.1 ( "Overview of VBAdmin Tools" in Operation Guide) VBAdmin Tools are for visually setting motion detection and for displaying logs taken by the camera - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 22
applied, on the VB-C500VD/VB-C500D setting page. VB-C500 Viewer is already built into the camera and need not be installed beforehand (P. 2-4). Only JPEG can be displayed. To display MPEG-4 video, install VK-Lite Viewer (P. 1-7). Network Video Recorder VK-Lite v2.2 ( Setup Guide) VK-Lite v2 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 23
VK-Lite Storage Server VK-Lite Viewer VK-Lite Viewer For VK-Lite, following cameras can also be registered and used. Supported cameras VB-C500VD/VB-C500D, VB-C60/VB-C60B, VB-C300/VB-C300B VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi Note To add a VK-Lite Viewer, you need to purchase an optional VK - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 24
recording, motion detection recording) Special day schedule recording Manual recording Maximum recording frame rate 5 fps 30 fps*1 The maximum limit may be imposed depending on the number of cameras, PC performance and hard disk space, network load, etc. *2 When multiple storage servers are used, - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 25
Guide and Administrator's Manual. Tip You cannot connect simultaneously to multiple VK-Lite Storage Servers from VK-Lite Viewer. However, if you use the optional VK-64 Viewer, you can centrally manage and operate up to 10 VK-Lite Storage Servers. Comparison of Two Viewers The VB-C500VD/VB-C500D - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 26
Audio Transmission/Reception (Two-way Communication) VB-C500VD / VB-C500D JPEG/MPEG-4 VK-Lite Viewer Microphone (sold separately) Network Microphone Speaker (sold separately) Audio Speaker Audio can be transmitted/received between the VB-C500VD/VB-C500D and viewer. Tip PC, speaker and - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 27
Windows XP Professional (SP3), Internet Explorer 6.0 (SP3)/7.0 Viewer display With VB-C500 Viewer, use of a high-resolution display with an effective display area of 1024 x 768 or more is recommended. Audio If the camera's audio feature is used, the PC's audio support feature is required. 1-11 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 28
Operating Environment Network Video Recorder VK-Lite v2.2 CPU OS Memory Hard disk Viewer use the camera's audio function or enable audio alert for event notification when the viewer is used, the PC's audio support feature is required. *1 Windows Vista and Windows Server 2008 support the 32- - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 29
on Use When the [Windows Firewall] Function is Enabled 1 When [VB Initial Setting Tool] is started, the [Windows Security Alert] dialog box of the Windows firewall may be disabled. Follow the procedure below to add [VB Initial Setting Tool] as an exception to the Windows Firewall. 1. Click [Control - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 30
level for Internet sites and intranet sites on Internet Explorer is set to [High] by default. Accordingly, when you access the top page of the camera, VB-C500 Viewer or any setting page, the contents block dialog box appears and the page is not displayed correctly. To display these pages correctly - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 31
this zone] check box, if currently selected. 1 3. Enter the IP address of the VB-C500VD/VB-C500D under [Add this Web site to the zone], and then click [ of VB-C500 Viewer may still be limited because JavaScript is sometimes disabled under the standard security setting. Once the camera's top - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 32
[Trusted sites] dialog box appears. This completes the process of registering the camera's top page as a trusted site. Notes on Use with Windows Server 2008 is disabled by default. If you want to receive audio on VB-C500 Viewer, enable the sound function by following the procedure below. 1. Click - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 33
Use Notes on Operating Environment Tip If [Control Panel] is displayed in a classic view, double-click [Sound]. 1 2. Click [Sound]. 3. An [Audio Service Not Running] message appears. Click [Yes]. 4. The [Sound] dialog box appears. Click the [Playback] tab to confirm that an audio device has - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 34
Notes on Operating Environment Notes on Use with Windows Vista The following restrictions apply when the VB-C500VD/VB-C500D is used with Windows Vista Home Premium/Business/Enterprise/Ultimate. Network Video Recorder VK-Lite v2.2 Warning dialog box displayed upon opening of the [Storage Server - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 35
Operating Environment Name and Function of Each Part 1 Dome Case/Inner Cover/Camera Interior VB-C500VD VB-C500D (1) (1) (9) (2) (2) (4) (4) (5) (5) (3) (6) (3) (6) (7) (7) (8) (8) (9) (1) Dome case (2) Inner cover (3) Varifocal lens Horizontal viewing angle 82° (4) Focus lock - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 36
Notes on Operating Environment Top View of Camera (Without Dome Case) VB-C500VD (10) (11) VB-C500D (10) (11) (12) (12) (13) (13) (14) (15) (16) (13) (10) Reset switch Turn on the power while pushing this switch. Continue to push the - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 37
on Operating Environment Bottom The serial number and the MAC address required for network settings are specified on the bottom of the camera. Write down these information before installing the camera. 1 VB-C500VD VB-C500D (17) (17) (18) (19) (19) (20) (20) (21) (21) (22) (22) (23 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 38
Optional Items Purchase optional items separately as necessary. Audio Interface Cable WA500-VB Use this interface cable (UL VW-1 Cable) to connect the camera to an audio input/output device (speaker, microphone, etc.). Marking band OUT IN The terminal marked "1" on the marking band (the longer - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 39
/output device 1 (sensor, warning lamp, etc.). For details, see "External Device I/O Terminals" ( P. 3-6). Power Interface Cable WP500-VB Use this interface cable (UL VW-1 Cable) to connect the camera to an optional AC adapter (PA-V17) or external power supply. For details, see "Use of External - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 40
The Recessed Mounting Kit is a dedicated option for VB-C500VD/VB-C500D. Use example AC Adapter PA-V17 Use this adapter when a PoE HUB or external power supply is not each PC. You need to purchase the license if you want to view video captured by the camera using VK Viewer from multiple sites. 1-24 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 41
-16 Viewer screen Before Use Note With VB-C500VD/VB-C500D, VK-64/VK-16 v2.1 or later must be used. If you are using VK-64/ VK-16 v2.1 or earlier, please update it to the new version. For details, visit our website. Tip This camera comes with VK-Lite v2.2, which is - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 42
Optional Items 1-26 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 43
install the camera. First, install the necessary software from the bundled Setup CD-ROM. Next, connect the camera to the network and perform initial setting of the camera. Check the video using VB-C500 Viewer, and then install the camera. Before installing the camera, be sure to set the IP address. - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 44
necessary software ( P. 2-4). PC Bundled Setup CD-ROM Step 2 Connect the camera to the network Connect the VB-C500VD/VB-C500D and PC to the network ( P. 2-6). If a PoE HUB or Midspan is used, consult your Canon sales representative. VB-C500D LAN cable PC PoE HUB The figure shows an example of - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 45
3 Perform initial setting of the camera Start VB Initial Setting Tool and perform initial setting of the camera ( P. 2-10). Check the image using VB-C500 Viewer ( P. 2-13). VB Initial Setting Tool window VB-C500 Viewer Step 4 Install the camera Install the VB-C500VD/VB-C500D securely ( P. 2-15 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 46
software is used to manage the camera. ( Chapter 2 in Operation Guide). Users other than Administrators need not install this tool. D Install it by executing VBToolsInstall.exe in the APPLICATIONS folder of Setup CD-ROM. Recording Software Type Overview Network Video Recorder VK-Lite This - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 47
Camera Step 1 Install the Software Install VB Initial Setting Tool, which is required for the inital setting of the camera. 1. Insert Setup CD-ROM bundled with the camera appears. Select an installation method. [Easy Installation]: VB Initial Setting Tool and VBAdmin Tools are installed. [Custom - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 48
Step 2 Connect the Camera to the Network Connect the Camera to the Network and Turn On the Power Here, an example of connecting one camera to a PC via a HUB is explained. VB-C500VD/VB-C500D has built-in PoE (Power over Ethernet). The power can be supplied to the camera, via a LAN cable, from a PoE - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 49
to the power interface cable. The power interface cable can be connected with no polarity. This camera has no power switch. If the power is supplied by the PoE via a LAN cable on the VB-C500VD/VB-C500D, disconnect and connect the LAN cable to the HUB receiving the power, to turn the power - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 50
the Network Note When turning off the power and then turning it back on, wait for at least 5 seconds before turning on the power. If the power is turned on too quickly, the camera may not operate correctly. Also, when disconnecting/connecting the power connection, be sure to observe the instructions - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 51
Step 2 Connect the Camera to the Network Use of External Power Supply An AC adapter, or 12-VDC or 24-VAC input can be used for the external power supply. Connect the bundled power interface cable (WP500-VB) as shown below. Power interface cable Screwdriver Tightening torque: 0.4N·m (3.54lbf·in) ( - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 52
Step 3 Perform Initial Setting of the Camera Perform Initial Setting of the Camera Set the network for the VB-C500VD/VB-C500D using VB Initial Setting Tool. 1. Launches VB Initial Setting Tool. Double-click the [VB Initial Setting Tool v5.0.1] icon on the desktop. Alternatively, click the [Start] - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 53
at the bottom of the camera ( P. 1-21). The factory default IP address is 192.168.100.1. Set a proper IP address according to the environment in which the camera is used. For the IP address, subnet mask and gateway address to be set, contact your Network Administrator. 4. The progress of setting - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 54
Address Setting] for LAN to [Auto (DHCP)] in [Network] in the Setting page. See "LAN" ( Operation Guide). The camera will stop issuing IP address assignment requests in 20 minutes after its power is turned on, upon which detection by VB Initial Setting Tool will be disabled. In this case, turn on - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 55
camera using VB-C500 Viewer. At this time, set the network options on the PC according to the IP address and subnet mask set in the camera. 1. Click the MAC address of the camera port of the camera from 80. For information on setting the HTTP port number, see "HTTP Server" ( Operation Guide). 2-13 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 56
transmitted to is not limited by the factory settings, etc. To use the camera for surveillance purposes, etc., be sure to set the [Access Control] options Privileges (Access Control)" ( Operation Guide). Tip For information on how to use VB-C500 Viewer, see Operation Guide. When [Setting Page] is - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 57
screws for rusting and loosening. • Do not install the VB-C500VD/VB-C500D to the place with strong vibration. • Do not install the VB-C500VD/VB-C500D on the uneven, inclined, or other unstable surface. • (VB-C500VD) Do not install the network camera to the place where is not strong enough or where - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 58
power supply Connect to the network Ceiling board VB-C500VD/VB-C500D * The figure shows VB-C500D. 1. Use the bundled template to determine the installation position of the camera. Confirm the capturing direction of the camera and determine the positions of camera mounting screws, as well as - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 59
case lock screws using the bundled dome case lock screw wrench. VB-C500D Loosen the two dome case lock screws on the side face of the camera. Loosen the screws until they are sticking out. VB-C500VD Dome case lock screw wrench VB-C500D Dome case lock screw Dome case lock screw Note When removing - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 60
and also to the installation location (anchor or structure in the ceiling, etc.). * The figure shows VB-C500D. Note The wire direction is different depending on how the camera is installed. 5. Connect each interface cable. • This process is not required if you don't use any microphone, sensor, AC - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 61
Initial Setting and Installation of Camera Step 4 Install the Camera VB-C500VD Concealing the Wiring in a Ceiling Cut out the tabs on the cable cover. Guide the interface cables through as in the figure below, and affix the cable cover with a screw. I/O interface cable Audio interface cable - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 62
Affix each interface cable in the specified groove, as shown below. If the cable is not properly installed, it may come off and cause the camera to malfunction. Affixing groove for cable Affixing groove for cable Affixing groove for cable Power Audio I/O Interface cable fixing method 2-20 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 63
Step 4 Install the Camera VB-C500D Concealing the Wiring in a Ceiling Cut out the tabs. Guide the interface cables through the groove as in the figure below, and affix the cable cover with a screw. I/O interface cable Audio interface cable Power interface - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 64
Wiring on a Ceiling Cut out the side face of the cable cover with the V-shaped groove. Guide the interface cables out towards the side face of the camera, and affix the cable cover with a screw. Cut out the V-shaped groove. Cut out the side face of the cover. Power interface cable I/O interface - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 65
mounting screw wholes to the position marked in step 1 to affix the camera. Screw holes (4 locations, Φ4.6 mm (Φ0.18 in), M4.0) Initial Setting and Installation of Camera * The figure shows VB-C500D. 8. Push the inner cover in the direction of the arrow, as shown below, to remove the cover. * The - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 66
shown below, to remove the cover. Tilt lock screw Pan lock screw Rotation lock screw Zoom adjustment knob * The figure shows VB-C500D. Focus lock screw 10. Adjust the camera focus. Loosen the zoom lock screw and focus lock screw, and adjust the viewing angle. Adjust the zoom by moving the zoom - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 67
to a point closer than the target subject. Tip Image from the network is disconnected when you switch to the installation mode (when the reset from the installation mode. In the installation mode, the camera cannot be controlled. Only NTSC is supported for video output. The LED remains lit in the - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 68
Step 4 Install the Camera 11. Install the inner cover. VB-C500VD Remove the damper lock plate. 12. Place the dome case on the camera, and affix it by tightening the dome case lock screws. 2-26 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 69
board 7#$7%7#$% * The figure shows VB-C500D. To install the camera inserted into a ceiling/wall, use an Recessed Mounting Kit SR500-S-VB (optional). Assemble the in-ceiling bracket before installation. See Recessed Mounting Kit SR-500-S-VB Assembly Instructions, which is supplied with the - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 70
2. Use the In-Ceiling Template supplied with the Recessed Mounting Kit to determine the installation position of the camera. Confirm the camera angle, and then use the supplied template to open screw holes for the Backside Ceiling Bracket and in-ceiling bracket. 3. Install the Backside Ceiling - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 71
on the screws that were loosely secured in step 3, turn the bracket clockwise, and securely tighten (affix) the screws. * The figure shows VB-C500D. 6. Adjust the camera angle and focus in the same manner as in steps 8 to 12 of "Installation Procedure for Direct Mounting on a Ceiling/Wall", and - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 72
the Camera 7. Install the recessed mounting cover. Align the mark (c) on the recessed mounting cover with the mark (I) on the in-ceiling bracket, and turn the cover clockwise up until the mark (I) on the recessed mounting cover to affix the bracket in position. * The figure shows VB-C500D. This - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 73
Appendix This section explains the external dimensions, specifications, external device input/output terminals, audio input/output terminals, etc. - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 74
External Dimensions VB-C500VD 155mm (6.10 in) 95mm ( 3.74 in) 118mm (4.65 in) Bottom 112mm (4.41 in) 76mm (2.99 in) 4- 4.6mm (0.16- 0.18 in) 3-2 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 75
VB-C500VD/VB-C500D External Dimensions 136mm (5.35 in) 95mm ( 3.74 in) Appendix Bottom 64mm (2.52 in) 108mm (4.25 in) 148mm (5.83 in) 4- 4.6mm (0.16- 0.18 in) 110mm (4.33 in) Recessed Mounting Kit SR500-S-VB (Option) 27mm (1.06 in) 63mm (2.48 in) 120° 169mm ( 6.65 in):Outside diameter - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 76
Specifications VB-C500VD/VB-C500D manual switching Camera Minimum subject illumination Focus Day mode Night mode Manual Canon's original protocol) IPv6 : TCP/IP, UDP, HTTP, FTP, SMTP (client), DNS (client), ICMPv6, POP3, NDP, SMTP authentication, WV-HTTP (Canon's original protocol) IPsec Camera - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 77
at the same time, network load, etc. *2 An optional speaker with amplifier is required to play audio. The specifications are subject to change without notice for purposes of improvement, etc. Dimensions Weight Shock resistance specifications VB-C500VD VB-C500D 155mm x 155mm x 118mm (6.10 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 78
camera. Check the shape of each terminal thoroughly and insert the terminal in the correct direction. VB-C500VD VB-C500D External External Device Input Status" in Operation Guide). To connect the camera to an external device, use a dedicated I/O interface cable WC500-VB. ( P. 1-23) The table - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 79
of external device input terminals (IN1, IN2), where each set consists of two terminals. The - terminals are connected to the GND in the camera. Two-wire cables are connected to the + and - terminals to achieve electrical continuity or insulation between the two terminals for notification to the - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 80
amplifier or other audio input/output device can be connected to the camera to send/receive sound via the viewer. To connect the camera to an audio input/output device, use a dedicated audio interface cable WA500-VB.( P. 1-22) Use a Φ3.5 monaural mini jack connector to connect the audio interface - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 81
, two types of microphones, LINE IN and MIC IN types, are supported. Note that the camera only has one audio input. Switch the input mode on the Setting page ("Audio Input" in Operation Guide). The factory setting is LINE IN. When LINE IN is selected, a microphone with amplifier can be connected - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 82
according to the microphone specification. See "Audio Input" ( Operation Guide). If a wrong input is used, the camera or microphone may be VB-C500 Viewer ( P. 1-9). Video and audio may sometimes lose synchronism. Audio may be interrupted depending on the performance of the PC used or the network - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 83
Appendix Input/Output Terminals 3-11 - Canon VB-C500D | NETWORK CAMERA VB-C500VD/C500D Start Guide - Page 84
MONTRÉAL 8801 Trans Canada Hwy, St. Laurent Québec H4S 1Z6 • If you have any questions, call the CANON CANADA Customer Information Centre toll-free at 1-800-OK-CANON (652-2666) (Canada only) CANON MEXICANA, S. DE R.L.DE C.V. Boulevard Manuel Avila Camacho, No. 138 PB, Pisos 15, 16 y 17 Col Lomas de
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
 |
 |
NETWORK CAMERA
Start Guide
Please read carefully
Start Guide
and the
Operation Guide
.
Especially be sure to read "Safety Precautions" before using the
network camera. Keep this guide in a readily accessible location
for future reference.