Canon VB-H610D Operating Guide

Canon VB-H610D Manual

Get Canon VB-H610D PDF manuals and user guides View all Canon VB-H610D manuals
Add to My Manuals
Save this manual to your list of manuals

Canon VB-H610D manual content summary:

  • Canon VB-H610D | Operating Guide - Page 1
    Network Camera NOetpwoerkraCatmioerna Guide Be sure to read this Operation Guide before using the network camera. ENGLISH
  • Canon VB-H610D | Operating Guide - Page 2
    you for purchasing a Canon Network Camera VB-H41/VB-H41B/VB-H610VE/VB-H610D/VB-H710F (hereafter referred to as the camera). The only difference between the VB-H41 and VB-H41B is the exterior color. The VB-H41, VB-H41B, VB-H610D and VB-H710F are for indoor use only. The VB-H610VE can be installed
  • Canon VB-H610D | Operating Guide - Page 3
    VB-H41, VB-H610D, VB-H710F) Notes on the Included Software RM-Lite (Disclaimer) Flaws or other problems with RM-Lite may result in recording failure or destruction or loss of recorded data. Canon one basis when you buy a new similar product waste disposal service or visit www.canon-europe.com/
  • Canon VB-H610D | Operating Guide - Page 4
    Open Source Software The product (camera and included RM-Lite) contains Open Source Software modules. For details, see "ThirdPartySoftware-E.pdf" (Third-Party Software License) in the OpenSourceSoftware folder in the LICENSE folder on the Setup CD-ROM. Each module's license conditions are also
  • Canon VB-H610D | Operating Guide - Page 5
    will be used to indicate those models. Icon Camera Model VB-H41 VB-H610VE and VB-H610D VB-H710F Symbols Indicating Safety Precautions This section explains symbols used in this Operation Guide. This Operation Guide uses the following symbols to indicate important information the user should
  • Canon VB-H610D | Operating Guide - Page 6
    SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The AC adapter (sold separately) can be connected to the camera from a standard AC power outlet. Please check your instruction manual Network Camera, Model Name: VB-H41/VB-H610VE/ VB-H610D/VB-H710F This device complies with
  • Canon VB-H610D | Operating Guide - Page 7
    This may cause malfunction. This installation should be made by a qualified service person and should conform to all local codes. Precautions for Use of the guarantee high-precision capture and cannot support applications beyond their intended range of use. Canon will assume no liability for any
  • Canon VB-H610D | Operating Guide - Page 8
    See steps in "Installing the Camera" in the "Installation Guide" included with the indoor dome housing and remove the dome. See steps in "Installing (dedicated accessory for VB-H41/VB-M40) or Recessed Mounting Kit (dedicated accessory for VB-H610VE/VB-H610D/VB-M600VE/ VB-M600D) Periodically check
  • Canon VB-H610D | Operating Guide - Page 9
    ...14 VB-H41 Features ...14 VB-H610VE/VB-H610D/VB-H710F Features 14 Camera Software...16 Installed Software...16 Included Software ...16 Network Video Recording Software (Sold Separately 16 User Support Tool ...17 RM-Lite (See the "Administrator Manual 18 Operating Environment 19 VB Initial
  • Canon VB-H610D | Operating Guide - Page 10
    Chapter 2 Initial Settings Preparing the Camera for Use 24 Installing the Necessary Software 26 Notes on Use with Internet Explorer 9 or Greater and Windows Server 2003/ Windows Server 2008 ...27 Performing Initial Settings for the Camera 28 Checking the Camera Image 29 Chapter 3 Camera Angle
  • Canon VB-H610D | Operating Guide - Page 11
    Table of Contents Chapter 6 Admin Tools Admin Tools Overview 80 Admin Tools ...80 Privacy Mask Setting Tool ...80 Panorama Creation Tool ...80 View Restriction Setting Tool 80 Preset Setting Tool ...81 Intelligent Function Setting Tool 81 Log Viewer ...81 Recorded Video Utility ...81 Accessing
  • Canon VB-H610D | Operating Guide - Page 12
    to Operate the Viewer 126 Display Screens of Admin Viewer 126 VB Viewer ...127 Obtaining Camera Control Privileges 128 Controlling the Camera ... to an SD Memory Card Manually 142 Chapter 8 Appendix SD Memory Card Access 144 Modifiers ...147 Troubleshooting ...149 List of Log Messages
  • Canon VB-H610D | Operating Guide - Page 13
    1 Chapter Before Use ❏ Camera Features ❏ Software Information ❏ Operating Environment and Precautions
  • Canon VB-H610D | Operating Guide - Page 14
    cards when the network is down (manual, timer and event recording are supported). Recorded Video Utility in Admin Tools support. You can operate camera angle controls remotely. VB-H610VE/VB-H610D/VB-H710F Features 3x Optical Zoom Lens Camera Angle Setting Tool Shock Resistant Structure (VB-H610VE
  • Canon VB-H610D | Operating Guide - Page 15
    Features 1 Dustproof and Waterproof Mechanisms (VB-H610VE only) The camera complies with the demanding IP66 dustproof/waterproof specifications and can be installed outdoors, such as underneath eaves, without any housing. The separately
  • Canon VB-H610D | Operating Guide - Page 16
    Video Utility Included Software The included Setup CD-ROM contains the following software. Install the software on a PC to use it. „ VB Initial Setting Tool (See Chapter 2 "Initial Settings") This tool performs initial settings for the camera. „ Admin Tools Certificate This electronic certificate
  • Canon VB-H610D | Operating Guide - Page 17
    User Support Tool A convenient tool can be installed for use on a PC. „ Backup and Restore Tools The Backup and Restore tools back up camera setting information to
  • Canon VB-H610D | Operating Guide - Page 18
    Supported cameras VB-H41, VB-H610VE, VB-H610D, VB-H710F, VB-M40, VB-M600VE, VB-M600D, VB-M700F, VB-C60, VB-C500VD/VB-C500D, VB-C300, VB-C50i/VB-C50iR, VB-C50FSi/VB-C50Fi Important • To add the RM-Lite Viewer, purchase RM-Lite-V (sold separately). • The VB-H41/VB-H610VE/VB-H610D/VB-H710F/VB-M40/VB
  • Canon VB-H610D | Operating Guide - Page 19
    firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site. VB Initial Setting Tool, Camera Angle Setting Tool, VB audio support feature is required. *1 The browser must support JavaScript, XAML browser applications, and IFRAMEs. The VB Viewer
  • Canon VB-H610D | Operating Guide - Page 20
    the Admin Tools, a content block dialog box appears and the page fails to display correctly. To correct this problem, follow the procedure below to register the top page as a trusted site. 1 Access the VB-H41/610/710 Viewer and the Setting Page from the top page of the camera with Internet Explorer
  • Canon VB-H610D | Operating Guide - Page 21
    dialog box does not appear, JavaScript is sometimes disabled under the standard security settings, which may limit operations on the setting page and the VB-H41/610/710 Viewer. Register the page as a trusted site as this automatically enables JavaScript settings. If the content block dialog box does
  • Canon VB-H610D | Operating Guide - Page 22
    has been installed. (If no audio device is installed, refer to your PC manual.) Notes on Use with Windows Vista/ Windows 7 The following restrictions apply when information on the RM-Lite operating environment, see the "Administrator Manual". Note If [Control Panel] is in the classic view, double-click
  • Canon VB-H610D | Operating Guide - Page 23
    2 Chapter Initial Settings ❏ Preparing the Camera for Use ❏ Initial Setting Tool Installation ❏ Initial Settings
  • Canon VB-H610D | Operating Guide - Page 24
    , access the camera via a web browser and check the image using the VB Viewer. "Checking the Camera Image" (p. 29) ▼ Installing the Camera Install the camera to suit the operating environment it will be used in. "Installation Guide" ▼ Setting the Camera Angle Use the Camera Angle Setting Tool to set
  • Canon VB-H610D | Operating Guide - Page 25
    to check distribution to guest users and Admin Viewer to check all operations. "Chapter 7 Admin Viewer/VB Viewer" ▼ Operating If an error message appears or the camera fails to operate correctly, see the error message and log message information in "Chapter 8 Appendix". "
  • Canon VB-H610D | Operating Guide - Page 26
    and Admin Tools on a PC other than the one where the VB Initial Setting Tool is installed. • If you install the software with Easy Installation, Agreement screen appears. 4 Select the installation method. [Easy Installation]: VB Initial Setting Tool, Admin Tools certificate and Camera Angle Setting Tool
  • Canon VB-H610D | Operating Guide - Page 27
    the Admin Tools, a content block dialog box appears and the page fails to display correctly. To correct this problem, follow the procedure below to register the top page as a trusted site. 1 Access the VB-H41/610/710 Viewer and the Setting Page from the top page of the camera with Internet Explorer
  • Canon VB-H610D | Operating Guide - Page 28
    . 1 Connect the camera and PC to the network and turn on the camera ("Installation Guide" > "Connecting the Camera"). 2 Launch the VB Initial Setting Tool. To launch the VB Initial Setting Tool, double-click the [VB Initial Setting Tool] icon on the desktop. 4 Enter the user name "root" and factory
  • Canon VB-H610D | Operating Guide - Page 29
    Viewer]. The viewer launches and displays the camera image. If the top page of the camera does not appear or the VB Viewer does not launch, see "Troubleshooting" (p. 149) in "Chapter 8 Appendix". Important • The camera image cannot be checked until the network settings in the PC are configured for
  • Canon VB-H610D | Operating Guide - Page 30
    30
  • Canon VB-H610D | Operating Guide - Page 31
    3 Chapter Camera Angle Setting Tool ❏ Camera Angle Setting Method ❏ Creating a Camera Specification File to Manage Multiple Cameras
  • Canon VB-H610D | Operating Guide - Page 32
    Setting the Camera Angle Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture orientation according to the situation. You can set pan, tilt, rotation, zoom, focus and exposure compensation. You can set zoom, focus and exposure compensation.
  • Canon VB-H610D | Operating Guide - Page 33
    Setting the Camera Angle 3 Click [Yes] at the following message. Connecting with a Camera List Camera Angle Setting Tool When using multiple cameras, the camera connection information already entered into the camera specification 3 file can be read into the camera list used by the Camera
  • Canon VB-H610D | Operating Guide - Page 34
    3 Select the camera specification file and click [Open]. „ Connecting to the Camera From the camera list, select the camera to connect to and click [Connect]. The camera specification file will be loaded and camera names listed will be displayed under [Camera List]. Camera list „ Connecting to
  • Canon VB-H610D | Operating Guide - Page 35
    Disconnecting from the Camera, Shutting Down 1 Click [Disconnect] from the [File] menu to disconnect the currently connected camera. 2 Click [Exit] from the [File] menu to shut down the Camera Angle Setting Tool. Setting the Camera Angle 3 Camera Angle Setting Tool 35
  • Canon VB-H610D | Operating Guide - Page 36
    Display Screen of Camera Angle Setting Tool (6) (2) (11) (12) (13) (4) (1) (5) (6) (3) (10) (14) (4) (15) (16) (5) (17) (7) (8) (9) (10) (2) (1) (10) (14) (15) (16) (17) (8) (9) (10) (1) Image Display Area The image captured by the camera is shown. (5) [Tilt] button Control
  • Canon VB-H610D | Operating Guide - Page 37
    Setting the Camera Angle (9) [Zoom] slider The slider to operate the zoom ratio. Setting the Camera Angle (10)[Zoom] button The button to operate the zoom ratio. You can operate pan, tilt, rotation and zoom operations to set a desired camera angle. 3 Camera Angle Setting Tool (11)[Control
  • Canon VB-H610D | Operating Guide - Page 38
    is recommended that you check whether the camera is focusing correctly. • Focus ranges (rough guide) are shown in the table below. Focus Mode Day/Night Setting Day Mode Night Mode Manual Fixed at infinity 0.3 m (12 in.) - infinity 1.0 m (3.3 ft.) - infinity Focused at infinity* * When using
  • Canon VB-H610D | Operating Guide - Page 39
    Name 1st row Header row → From 2nd row Camera information for 1 camera per line (up to 30 cameras) ↓ RegisterName B1F VB-H710F 1Fa VB-H610VE 1Fb VB-H610D ..... ↓ HostName 192.168.100.1 192.168.100.2 192.168.100.3 ..... Port Number ↓ PortNumber 80 80 80 ..... Administrator User Name ↓ UserName
  • Canon VB-H610D | Operating Guide - Page 40
    192.168.100.1,80,root,camera1,0 1Fa VB-H610VE,192.168.100.2,80,root,camera2,0 1Fb VB-H610D,192.168.100.3,80,root,camera3,0 2Fa VB-H610D,192.168.100.4,80,root,camera4,0 2Fb VB-H610D,192.168.100.5,80,root,camera5,0 3Fa VB-H710F,192.168.100.6,80,root,camera6,0 R VB-H610VE,192.168.100.7,443,root,camera7
  • Canon VB-H610D | Operating Guide - Page 41
    4 Chapter Top Page of the Camera ❏ Accessing the Setting Page, Admin Tools and Viewer
  • Canon VB-H610D | Operating Guide - Page 42
    Initial Setting Tool. Important This "Operation Guide" explains relevant operations using the IP address set for the camera when following instructions. The top page of the camera appears Administrator and an authorized user share the VB Viewer on the same PC, it supported for IPv6 connections. 42
  • Canon VB-H610D | Operating Guide - Page 43
    5 Chapter Setting Page ❏ Administrator Password and Network Detailed Settings ❏ Camera Date and Time Settings ❏ Camera Name and Initial Camera Settings Related Settings ❏ Video Size and Quality Settings ❏ Upload and E-mail Notification Settings ❏ Video Server, Audio Server and HTTP Server Settings ❏
  • Canon VB-H610D | Operating Guide - Page 44
    Setting Menu From the Setting Menu, you can navigate to each setting page to set various items regarding the camera. Information describing what can be set from each setting page is listed as follows. See each setting page for details. Setting Menu • Network Administrator password, LAN, IPv4, IPv6,
  • Canon VB-H610D | Operating Guide - Page 45
    Accessing the Setting Menu The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page of the camera (p. 42). For details on entering the user name and password, see p. 42. Setting Menu (3) (1) (2) Items Common to All Setting Pages 5
  • Canon VB-H610D | Operating Guide - Page 46
    „ Returning to the Setting Menu Click [Settings menu] at the top right of each setting page to return to the Setting Menu. Important • Do not open multiple setting pages at one time and try to change the settings of a single camera. • Do not use the [Back] or [Forward] buttons in the web browser to
  • Canon VB-H610D | Operating Guide - Page 47
    maximum packet size to a slightly lower value may increase sending efficiency. IPv4 (1) [IPv4 Address Setting Method] Select [Manual] or [Auto (DHCP)] in the address setting method. If [Manual] is selected, directly enter the values according to the environment in which the camera is used. If [Auto
  • Canon VB-H610D | Operating Guide - Page 48
    is present between the DHCP server and the camera. In this case, assign a fixed IPv4 address from the [Manual] settings. Note • You can check the IPv4 address assigned by [Auto (DHCP)] with the VB Initial Setting Tool. IPv6 (5) [Prefix Length] Enter a prefix length from 16 to 128 if [Disable] is
  • Canon VB-H610D | Operating Guide - Page 49
    ] A list of domain names added using [Search Domain] • Use the SNMP Manager that supports SNMP MIB2 (supporting RFC1213). 5 appears. The function queries DNS server for each domain name starting from the top of . If left blank, the following will be used by default: VB-H41 VB-H610 VB-H710 49
  • Canon VB-H610D | Operating Guide - Page 50
    is selected. If the wrong time zone is selected, set the correct time zone manually. • If [Synchronize with NTP server] is selected and the IP address of and time will not be changed. • The camera's NTP broadcast mode does not support IPv6. • If the [Time Zone] setting is changed, the date and time
  • Canon VB-H610D | Operating Guide - Page 51
    [Camera] Setting Initial Camera Settings and External Device Name The following can be set here. (1) [AE Mode], [Slow Shutter], [Shutter Speed] Set the exposure control and shutter speed for the • Camera Name camera startup. Enter the name of the camera. The camera name is required for use
  • Canon VB-H610D | Operating Guide - Page 52
    image. [Auto] The white balance is adjusted automatically. [Manual] Set the values of red and blue gain according to speed lower than 1/100 to see if the problem improves. • Setting a slow shutter speed may On" (p. 38). • Focus ranges (rough guide) are shown in the following table according to the
  • Canon VB-H610D | Operating Guide - Page 53
    Camera Settings and External Device Name Day/Night (1) [Digital Zoom] (1) [Mode] Set digital zoom to [Disable] or [Enable]. Set Day/Night mode to [Manual] or [Auto]. The higher the digital zoom ratio, the lower the image It is also possible to switch between [Day Mode] and quality becomes
  • Canon VB-H610D | Operating Guide - Page 54
    [Turn Off] if you do not want to turn on the LED. Set to [Turn Off] if the separately sold indoor dome housing (DR41-C-VB/DR41-S-VB) will be used, if reflected LED light enters the capture area or otherwise interferes with image capture, or if you do not want to show
  • Canon VB-H610D | Operating Guide - Page 55
    [Video] Setting Video Size, Quality and Frame Rate The following can be set here. H.264 • JPEG Set the video quality, size, maximum frame rate and upload size in JPEG. • H.264 5 Set the bit rate, video size and capture frame rate in H.264. Setting Page • On-screen display Set time,
  • Canon VB-H610D | Operating Guide - Page 56
    • Block noise may become noticeable if a large video size and low target bit rate are set. • The data size may increase depending on the type or movement of the subject. If the frame rate remains low or other undesirable conditions continue for a prolonged period, lower the video size or quality
  • Canon VB-H610D | Operating Guide - Page 57
    notification by text and image and image upload by HTTP/FTP, set [Video Size: Upload / SD card] (p. 55) to a small size. • HTTP upload does not support SSL/TLS. • If the camera is set to perform upload or e-mail notification continuously, not all images or e-mails may be sent depending on the
  • Canon VB-H610D | Operating Guide - Page 58
    - From the Intelligent Function Setting Tool [Event] tab > disable [ON Event Operation], [OFF Event Operation] or [Detected mode Operation] (p. 108). - If [External Device Input Event] is enabled, disable [Active Event Operation] or [Inactive Event Operation] (p. 63). - If [Timer Event] is enabled,
  • Canon VB-H610D | Operating Guide - Page 59
    [Upload] Setting HTTP/FTP Upload and E-mail Notification [Subdirectory Name to Create], [File Name to Create] If file naming is set to [User Setting], enter the subdirectory name to be created as well as the name of the created file (using up to 127 characters). Parameters can be specified in the
  • Canon VB-H610D | Operating Guide - Page 60
    [Server] Setting the Video Server, Audio Server and HTTP Server The following can be set here. • Video Server Set the video transmission from the camera. • Audio Server Set the audio transmission/reception. • HTTP Server Set the authentication method, HTTP port and web page delivery. Video Server
  • Canon VB-H610D | Operating Guide - Page 61
    ] settings are changed after setting volume detection, check the detection setting again. • Connect a speaker with amplifier to the camera ("Installation Guide" > "Audio Input/Output Terminals"). • If [Enable] is selected under [Echo Canceller], the sound quality or volume may be affected. Utilize
  • Canon VB-H610D | Operating Guide - Page 62
    [Event] Setting Video Record, Volume Detection, Audio Playback and Timer The following can be set here. • Video Record Setting Set where video is recorded when an event occurs. • Volume Detection Set the operation to be performed at the time of volume detection. • External Device Output Set
  • Canon VB-H610D | Operating Guide - Page 63
    [Event] Setting Video Record, Volume Detection, Audio Playback and Timer (9) [E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification is performed when a volume detection event occurs. To use this function, the [E-mail Notification
  • Canon VB-H610D | Operating Guide - Page 64
    happen when an external device input event is triggered (p. 139). • If the [Day/Night Mode Switching] settings switch Day/Night Mode while the VB-H41/610/710 Viewer is assigned camera control, control will be released. Timer (1) [Timer Event] Select [Disable] or [Enable] for timer event. (2) [Start
  • Canon VB-H610D | Operating Guide - Page 65
    can only be set in [Timer 1]. • [Day/Night Mode Switching] does not support [Repeat Interval]. • When [Day/Night] in the Admin Viewer is set to the [Day/Night Mode Switching] settings switch Day/Night Mode while the VB-H41/610/710 Viewer is assigned camera control, control will be released. Sound
  • Canon VB-H610D | Operating Guide - Page 66
    [Access Control] Setting User Access Privileges The following can be set here. • Authorized User Account Register who can access this camera. • User Authority Set the authorities for authorized users and guest users. • IPv4 Host Access Restrictions Specify the hosts from which IPv4 access is
  • Canon VB-H610D | Operating Guide - Page 67
    IPv6 Host Access Restrictions [Access Control] Setting User Access Privileges Setting Page 5 (1) [Apply Host Access Restrictions] Set IPv6 host access restrictions to [Disable] or [Enable]. (2) [Default Policy] If IPv6 host access restrictions are applied, select [Authorize Access] or [Prohibit
  • Canon VB-H610D | Operating Guide - Page 68
    • IPsec Set IP security can be specified through auto key exchange or manual setting with up to five communicating devices. IPsec (6) [DH Group] for use with IPsec can be selected as [Auto Key Exchange] or [Manual]. Auto Key Exchange Settings (1) [IPsec SA Encryption Algorithm] Set the IPsec
  • Canon VB-H610D | Operating Guide - Page 69
    Algorithm] Set the ESP encryption algorithm to [AES], [3DES], IPsec Set (Manual) [DES] or [NULL] according to the encryption IPsec Sets 1 to can specify IPsec settings for one communication device for each IPsec Set. algorithm supported by the device to connect to. Normally [AES] or [3DES] is
  • Canon VB-H610D | Operating Guide - Page 70
    to [HMAC_SHA1_96] or [HMAC_MD5_96] according to the authentication algorithm supported by the device to connect to. (17)[SA AH Authentication > [IPv4 Address Setting Method] > [Manual]. For IPv6 addresses, use addresses set with [Network] > [IPv6 Address (Manual)]. • If any setting is changed from
  • Canon VB-H610D | Operating Guide - Page 71
    Page (1) [Create Self-Signed Certificate] After entering each of the following settings, click [Exec] to create a self-signed certificate. Follow the instructions in the message and reboot. The certificate created will take effect after rebooting. Note Creating a certificate takes time, so it is
  • Canon VB-H610D | Operating Guide - Page 72
    (8) [Backup] Click [Exec] to perform a backup of the certificates and private key. This operation can only be performed via SSL communications. (9) [Restore] Installs the certificates and private key from backup. Click [Browse] to select the backup file, then click [Exec]. This operation can only be
  • Canon VB-H610D | Operating Guide - Page 73
    of booting. For inserting and removing the SD memory card, see "Installation Guide" > "Using an SD Memory Card". (2) [Operation Settings] Set write setting is enabled and [Enable] is selected for [Video Record] - When manually recorded to SD memory card from the Admin Viewer (p. 142) • New files
  • Canon VB-H610D | Operating Guide - Page 74
    turning off the power to the camera or removing the SD memory card. Failing to unmount first may result in management file problems or the SD memory card becoming inaccessible. (2) [Operation Settings], [Video Format], [Pre-event Buffer], [Post-event Buffer], [Overwrite videos] These settings are
  • Canon VB-H610D | Operating Guide - Page 75
    Important Information recorded to the SD memory card may be regarded as "personal information". Take sufficient precautions for handling this information when releasing to third parties for disposal, transfer or repair. Note • For accessing files saved to the SD memory card, see "SD Memory Card
  • Canon VB-H610D | Operating Guide - Page 76
    on a single page. • LAN, IPv4, IPv6, Installation Conditions (VB-H41 only), HTTP Server Important These settings relate to network connectivity. ], [AutoIP], [IPv6], [Auto (RA)], [Auto (DHCPv6)], [IPv6 Address (Manual)], [Prefix Length], [IPv6 Default Gateway Address], [HTTP Port] and [HTTPS Port
  • Canon VB-H610D | Operating Guide - Page 77
    [Maintenance] Viewing Event Logs and Current Settings and Performing Maintenance The following items can be used here. • Tool Display or Initialize Camera Settings 5 Tool Setting Page (1) [View Logs] Display a history of camera operations and connections to each viewer, etc. (2) [View Current
  • Canon VB-H610D | Operating Guide - Page 78
    78
  • Canon VB-H610D | Operating Guide - Page 79
    6 Chapter Admin Tools ❏ Privacy Mask Setting ❏ Panorama Image Registration ❏ View Restriction Setting ❏ Camera Preset Setting ❏ Intelligent Function Setting ❏ Viewing Logs ❏ Managing SD Memory Card Video
  • Canon VB-H610D | Operating Guide - Page 80
    areas can be masked, allowing thorough protection of privacy. View Restriction Setting Tool (p. 90) The View Restriction Tool restricts the viewable capture range in the VB Viewer. You can set the desired range with the mouse by referring to the preview in panorama mode. 80
  • Canon VB-H610D | Operating Guide - Page 81
    Admin Tools Overview Preset Setting Tool (p. 94) A tool that lets you set presets and the home position visually. You can make the desired settings with the mouse by referring to the preview in panorama or full image mode. You can also set [Preset Tour] whereby the camera tours and monitors
  • Canon VB-H610D | Operating Guide - Page 82
    Accessing the Admin Tools Launching the Admin Tools The Admin Tools can be launched from the top page of the camera. 1 Start the top page of the camera (p. 42). 2 Click [Admin Tools]. A user authentication window appears. 3 Enter a user name and password and click [OK] (p. 42). The Admin Tools
  • Canon VB-H610D | Operating Guide - Page 83
    camera is shown. Privacy masks can be resized/moved in the image display area. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details, see "How to Operate the Viewer" (p. 126). (2) [Switch Mouse Operation] button Each time this button is clicked, the button
  • Canon VB-H610D | Operating Guide - Page 84
    be obtained the moment the Privacy Mask Setting Tool is launched. (6) [Control for Admin] button Displays the Control for Admin Panel (p. 120). (7) Registered Privacy Mask Display Area (Capture area) You can check the settings for the area where the camera can physically capture privacy masks. Even
  • Canon VB-H610D | Operating Guide - Page 85
    video, uploaded images, recorded video, video recorded to an SD memory card). • Privacy mask areas cannot be set in digital zoom areas. VB-H610VE/VB-H610D/VB-H710F (1) (3) • Privacy masks set at a zoom position close to the tele end may deviate slightly from the specified position. • Set the
  • Canon VB-H610D | Operating Guide - Page 86
    Changing/Deleting a Privacy Mask Area How to Change 1 Select the privacy mask area you want to change. Click the privacy mask area you want to change in the registered privacy mask display area (capture area) or select a privacy mask area by clicking [Next]. How to Delete Select the privacy mask
  • Canon VB-H610D | Operating Guide - Page 87
    Panorama Creation Tool A panorama image capture/creation tool that shows the entire area that can be captured by this camera. When performing pan, tilt, or zoom operations, setting presets using the viewer, etc., you can see at a glance which part of the entire area the set area is occupying. 6
  • Canon VB-H610D | Operating Guide - Page 88
    Display Screens of Panorama Creation Tool (1) (2) (3) (4) (5) (6) (12) (7) (13) (8) (11) (9) (1) [Load from camera] Show the panorama image saved in the camera. (2) [Save to camera] Save the currently shown panorama image in the camera. (3) [Load from file] Show JPEG files as a panorama
  • Canon VB-H610D | Operating Guide - Page 89
    Panorama Creation Tool • When a small value is entered for [Maximum Frame Rate: Video Transmission] under [Video] > [JPEG] in the Setting page, panorama capture is slowed down. Opening a Panorama Image from Image Files/Saving as Image Files 2 When the capture is complete, click [Finish Panorama
  • Canon VB-H610D | Operating Guide - Page 90
    set by the View Restriction Setting Tool are applied in the following cases. • When the Admin Viewer is accessed with authorized user authorities • When the VB Viewer is accessed • When accessed via RM-Lite 90
  • Canon VB-H610D | Operating Guide - Page 91
    (4) (12) (13) (1) Image Display Area The image currently captured by the camera is shown. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details, see "How to Operate the Viewer" (p. 126). (2) [Switch Mouse Operation] button Click the button to switch to . In this
  • Canon VB-H610D | Operating Guide - Page 92
    different from the actual image. After view restrictions have been set, be sure to confirm with the VB Viewer that the view restrictions have been reflected correctly. • Confirm the settings using the VB Viewer. (View restrictions are not applied to the image display area of this tool, nor to the
  • Canon VB-H610D | Operating Guide - Page 93
    Maximum vertical capture area Tilt controllable area Maximum wide-angle viewing angle Pan controllable area Maximum horizontal captured area • The pan and tilt ranges vary depending on the zoom ratio (view angle). Setting view restrictions automatically restricts the camera operating angle.
  • Canon VB-H610D | Operating Guide - Page 94
    Preset Setting Tool A tool that lets you set presets and the home position. You can make the desired settings with the mouse by referring to the preview in the panorama or full image mode. You can also set Preset Tour whereby the camera tours and monitors multiple presets. Preset Setting Tool
  • Canon VB-H610D | Operating Guide - Page 95
    (4) (20) (21) (1) Image Display Area The image currently captured by the camera is shown. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details, see "How to Operate the Viewer" (p. 126). (2) [Switch Mouse Operation] button Click the button to switch to . In this
  • Canon VB-H610D | Operating Guide - Page 96
    or [ON] for the BLC setting of the camera. • [Focus Mode] Select [Auto], [Manual], or [Fixed at infinity] for the focus mode of the camera. (p. 137) • [Smart see p. 52. • [R Gain], [B Gain] If white balance is set to [Manual], set the respective gains to a value between 0 and 1023. (12)[Get camera
  • Canon VB-H610D | Operating Guide - Page 97
    Preset Setting Tool 3 Operate the camera from the image display area, set it to the desired position and click [Quick Registration]. „ Using the Digital PTZ Function to Set Presets „ Use the preview frame of the panorama screen to set presets Use the preview frame of the panorama screen to set
  • Canon VB-H610D | Operating Guide - Page 98
    in the viewer, select the [Show in viewers] checkbox. • Set presets again if the camera mounting conditions have been changed. • If [Manual] is selected in [Focus Mode], manually adjust the focus while checking the actual image in the image display area. After the focus has been adjusted, set the
  • Canon VB-H610D | Operating Guide - Page 99
    tour from the following options. [Not used] Preset tour is not performed. [For Viewers] Preset tour is performed when a camera is connected via the VB Viewer, etc. • Preset tour is not performed when control privileges are obtained by RM-Lite. „ Setting the Preset Tour 1 Select the touring method
  • Canon VB-H610D | Operating Guide - Page 100
    3 Select a preset in the tour schedule list, and set the preset operation. In [Speed (PT)] and [Speed (Z)], you can set the pan, tilt, and zoom speeds of the preset. In [Pause (sec)], you can enter the number of seconds for the camera to remain stationary at the preset position. When [Preview] is
  • Canon VB-H610D | Operating Guide - Page 101
    Intelligent Function Setting Tool This tool is used to set intelligent functions that perform uploads, notify the viewer, audio playback, etc., if a change has occurred in the captured image due to movement of a subject. Camera Tampering Detection Moving Object Detection Volume Detection Camera
  • Canon VB-H610D | Operating Guide - Page 102
    Abandoned Object Detection Detect objects that are carried in and abandoned for a certain amount of time. This function can be used to detect objects that have been left. Abandoned object detection is triggered when an object is left in the detection area for a specified duration. Object abandoned.
  • Canon VB-H610D | Operating Guide - Page 103
    where high reliability is required. If constant and maximum reliability is required for surveillance it is not recommended that you use this function. Canon shall assume no liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations. 103
  • Canon VB-H610D | Operating Guide - Page 104
    for which movement has been detected are shown in a detection block and detection frame. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details, see "How to Operate the Viewer" (p. 126). However, when the (11) [Lock camera position] checkbox is selected, the camera
  • Canon VB-H610D | Operating Guide - Page 105
    Intelligent Function Setting Tool Important Flow of Intelligent Function Setting It takes tens of seconds for the intelligent function to restart. No detection is performed while restarting. The intelligent functions are set according to the procedure below. For details on the setting method,
  • Canon VB-H610D | Operating Guide - Page 106
    „ Intelligent Function Settings 1 Add detection settings. When you click [Add] in the [Detection Setting List], the [New Detection Settings] dialog box is displayed. Set the [Detection Setting Number] and [Detection Type] of the detection setting you want to add, and then click [OK]. Up to 15
  • Canon VB-H610D | Operating Guide - Page 107
    Setting Intelligent Function Detection Settings „ Setting Detection Criteria ([Detection Criteria] tab) Set detection criteria while operating the camera and checking the image in the image display area. [Detection Criteria] tab (Except passing detection) (1) (2) (3) (4) [Detection Criteria] tab (
  • Canon VB-H610D | Operating Guide - Page 108
    „ Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab (1) (2) (3) (4) (5) (1) Specify the operation timing. (Multiple checkboxes can be selected.) [ON Event Operation] checkbox When selected, the operations set in (2) [E-mail
  • Canon VB-H610D | Operating Guide - Page 109
    Intelligent Function Setting Tool • Click [Clear] to delete the polygonal detection area. • The camera tampering detection area cannot be changed. Changing a [Rectangular] detection area into a [Polygonal] shape or changing a [Polygonal] detection area into a [Rectangular] shape Changing the shape
  • Canon VB-H610D | Operating Guide - Page 110
    Any moving objects detected are shown with contour lines. If [Object Size (%)] and [Duration (Sec)] are not exceeded, contour lines are white. When all detection criteria are met, contour lines take on the same color as the detection area and "detected" mode is triggered to ON. Detect criteria for
  • Canon VB-H610D | Operating Guide - Page 111
    Intelligent Function Setting Tool Detect criteria for [Passing Detection] Set the passing direction and decision point of the moving object for the detection line that the moving object will cross. Important Perform a detection test in advance to make sure that the detection frame continues to be
  • Canon VB-H610D | Operating Guide - Page 112
    2 Select [Reduce effects of lighting change]. 3 Click [Save settings]. Important A [Reduce effects of lighting change] setting may not work depending on the operating environment. Sudden changes in brightness that persist may also have the same effect. Perform a detection test to check what will
  • Canon VB-H610D | Operating Guide - Page 113
    Log Viewer This tool lets you view the operating condition log of the camera. Display Screens of Log Viewer (1) (2) (3) (4) (5) (6) (7) 6 (8) (10) (9) (12) Admin Tools (11) (13) (14) (15) (16) (1) [Download] Download log files from this camera or SD memory cards. (2) [Reload]
  • Canon VB-H610D | Operating Guide - Page 114
    (13)[Date & Time] Set the date and time of the log you want to show using the filter function. Select the [Specify start date & time] or [Specify end date & time] checkbox to set the date and time. (14)[Apply filter] Show the filtered logs in the log display area. (15)[Search for] Enter the
  • Canon VB-H610D | Operating Guide - Page 115
    memory are cleared when you perform [Maintenance] > [Restore Settings] and [Reboot], or press the reset switch on the camera. Note [Application], [HTTP Server], and [System] support the List of Log Messages (p. 151). 115
  • Canon VB-H610D | Operating Guide - Page 116
    Recorded Video Utility This utility manages video recorded on an SD memory card. It allows you to play back recorded video and download it to a PC, display a video list or perform filtering. Display Screens of Recorded Video Utility (1) (2) (3) (4) (5) (6) (12) (7) (8) (9) (10) (11) (1) [
  • Canon VB-H610D | Operating Guide - Page 117
    . [Format] Displays the format of a recorded video ([JPEG] or [H.264]). [Recording Type] Displays the type of recorded video ([Upload], [Recording-Mode Stream], [Manual], [Timer], [Event]). [Video in Camera] Displays whether or not any video remains on an SD memory card. When video has been deleted
  • Canon VB-H610D | Operating Guide - Page 118
    Note When the download folder is changed, the download status of the files in the download folder prior to the change becomes [Not Downloaded]. Manually copy the files in the download folder prior to the change to the new download folder to change their status to [Downloaded]. Downloaded videos are
  • Canon VB-H610D | Operating Guide - Page 119
    Recorded Video Utility Button Description Move to first frame Move to previous frame Fast rewind Playback Pause Fast forward Move to next frame Deleting Videos You can delete videos from an SD memory card. 1 Select a video to delete in the video list. 2 Click [Delete from Camera]. The video is
  • Canon VB-H610D | Operating Guide - Page 120
    Control for Admin This panel is used to adjust video from the camera that is displayed by each Admin Tool. The panel is available to the Privacy Mask Setting Tool, View Restriction Setting Tool, Preset Setting Tool and Intelligent Function Setting Tool. „ Operating the Control Items The panel
  • Canon VB-H610D | Operating Guide - Page 121
    7 Chapter Admin Viewer/VB Viewer ❏ Differences between the Admin Viewer and the VB Viewer ❏ User Authorities and Camera Control Privileges ❏ Viewer Startup and Operation ❏ Camera Control and Obtaining Camera Control Privileges ❏ Admin Viewer Operation and Settings
  • Canon VB-H610D | Operating Guide - Page 122
    of viewer are available, the Admin Viewer and the VB Viewer. VB-H41/610/710 Viewer Admin Viewer VB Viewer Important Use the RM-Lite Viewer to display H. functions, such as shooting adjustment settings or event detection display. VB Viewer: This viewer is limited to basic image operations for
  • Canon VB-H610D | Operating Guide - Page 123
    Viewer, users must also have camera control authority. Audio distribution authority is required to receive audio using the Admin Viewer and the VB Viewer. [Administrator] • Only the [Administrator] can transmit audio from the viewer. • At any time, the [Administrator] can launch the Admin Viewer to
  • Canon VB-H610D | Operating Guide - Page 124
    Video Distribution Audio Distribution VB Viewer Video Distribution*2 VB Viewer Video size, video display size, full screen mode, reconnect, audio reception, get a snapshot Panorama PTZ *1 PTZ: Pan, tilt, zoom *2 If video distribution authority is disabled, users can no longer use VB Viewer. 124
  • Canon VB-H610D | Operating Guide - Page 125
    PC that is using the Admin Viewer. (p. 26) • This Operation Guide explains relevant operations based on the IP address "192.168.100.1" (factory the camera when following instructions. 7 1 Access "http://192.168.100.1/" via the web browser. 2 Click [Admin Viewer] or [VB Viewer] according to the
  • Canon VB-H610D | Operating Guide - Page 126
    How to Operate the Viewer Display Screens of Admin Viewer The following gives an overview of the functions of buttons, boxes and other screen elements displayed in the Admin Viewer. The following screen shows the Admin Viewer with all panels opened. In practice, you only open panels that are
  • Canon VB-H610D | Operating Guide - Page 127
    cropped area in the image display area. starts up. Admin Viewer/VB Viewer (18)[Event Display] button The event display panel is displayed. (19 )[Viewer PTZ] button The viewer PTZ panel is displayed. VB Viewer (2) (3) (11) (9) (4)(5)(6) (8) (20)[Panorama Display] button
  • Canon VB-H610D | Operating Guide - Page 128
    and camera control status indicator changes according to the status of control privileges shown as follows. Control privileges not assigned With the VB Viewer, the control privilege status indicator appears in gray and an animated [Obtain/Release Camera Control] button is displayed. The Admin Viewer
  • Canon VB-H610D | Operating Guide - Page 129
    show the 7 image currently being captured by the camera. Admin Viewer/VB Viewer Blue frame lines mean that you do not have camera Controlling the only within the view restrictions. • Users operating the camera in the VB Viewer can control the camera within the view restrictions. Note In the
  • Canon VB-H610D | Operating Guide - Page 130
    „ Changing the Camera Zoom Ratio Move the knob on the slider up or down to zoom in or out The camera zoom ratio will change according to the knob position on the slider. The knob can also be moved by clicking on an empty part of the slider. Zoom telephoto end (only when digital zoom is on) Optical
  • Canon VB-H610D | Operating Guide - Page 131
    see p. 136. „ Opening the Digital PTZ Panel Click the [Digital PTZ] button to display the Digital PTZ panel. How to Operate the Viewer 7 Admin Viewer/VB Viewer The appearance of the [Digital PTZ] button differs as follows depending on the state of the Digital PTZ function. Digital PTZ is disabled
  • Canon VB-H610D | Operating Guide - Page 132
    , Digital PTZ will stay on. Setting Video and Audio Note • When the VB Viewer is launched, the video size set for the camera is applied. When will open a new window to show video in the full screen mode. Admin Viewer VB Viewer „ Changing the Video Size You can set a desired video size for video
  • Canon VB-H610D | Operating Guide - Page 133
    reception will stop and camera control privileges will be lost. In the VB Viewer, the video size and display screen size will also return to the the Receive Audio panel is launched, a message to install the add-on "Canon Network Camera Audio Receiver" will be displayed in the information bar of the
  • Canon VB-H610D | Operating Guide - Page 134
    Checking Information The following icons will appear depending on the content of the information displayed. Icon (color) Meaning Description (Blue) Information Appears when a camera operation has been successful. The following information appears. • Help messages, such for each button and
  • Canon VB-H610D | Operating Guide - Page 135
    under "Troubleshooting" in "Chapter 8, Appendix" (p. 149) and confirm the settings. • Video cropped with Viewer PTZ will not be videos recorded manually, or . Admin Viewer/VB Viewer Note The first time the Send Audio panel is launched, a message to install the add-on "Canon Network Camera Audio
  • Canon VB-H610D | Operating Guide - Page 136
    The size of the received data is large. is small. Can be used only in Admin Viewer. Can be used in both Admin Viewer and VB Viewer. Not necessary to obtain the camera control privileges. Necessary to obtain the camera control privileges. PTZ operation can be performed independently for each
  • Canon VB-H610D | Operating Guide - Page 137
    compensation, smart shade control can reduce overexposure of bright areas. Admin Viewer/VB Viewer (3) (1) (2) (4) (1) [Pan/Tilt] button Move pan level. „ Setting the Focus [Auto] [Manual] : Automatically focuses on the subject. : You can adjust the focus manually by pushing the (far) and (near
  • Canon VB-H610D | Operating Guide - Page 138
    the left closes the aperture and darkens the image. Moving the slider to the right opens the aperture and brightens the image. (6) [Gain] If [Manual] is selected for the exposure mode, set a desired gain value. Moving the slider to the left decreases the gain (sensitivity to brightness) and darkens
  • Canon VB-H610D | Operating Guide - Page 139
    in appropriate colors under mercury lamps when the [Mercury Lamp] mode is selected under light source, use the [Auto] mode. Admin Viewer/VB Viewer (1) [Auto] The white balance is adjusted automatically. (2) [Light Source] Select the light source from the pull-down menu below according to
  • Canon VB-H610D | Operating Guide - Page 140
    Night Mode. Can only be set when [Focus] is set to [Manual] (p. 137). (5) (6) (7) Focusing positions will vary under different light sources, such as fluorescent or infrared, since the wavelengths of these light sources vary. One of the
  • Canon VB-H610D | Operating Guide - Page 141
    under [Event] > [Volume Detection] in the Setting Page is detected, the icon turns green. Example: 7 Volume Detection status ON Admin Viewer/VB Viewer (2) (3) (1) [External Device Input] When a contact input signal is received from an external device, input will be activated and an icon
  • Canon VB-H610D | Operating Guide - Page 142
    card depends on the video size of the viewer. The video format depends on the [Memory Card] setting page (p. 73). „ Recording Videos Manually 1 If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control] button and obtain the control privileges. 2 Click
  • Canon VB-H610D | Operating Guide - Page 143
    8 Chapter Appendix ❏ SD Memory Card Access ❏ Modifiers ❏ Troubleshooting ❏ List of Log Messages ❏ List of Viewer Messages ❏ Restore Settings ❏ List of Factory Default Settings ❏ Index
  • Canon VB-H610D | Operating Guide - Page 144
    or FTP upload failed due to network errors (JPEG/H.264) • Video files manually recorded by the user from the Admin Viewer (JPEG/H.264) • Video any unneeded JPEG/H.264 video files with the Recorded Video Utility. „ Video Manually Recorded by the User (JPEG/H.264) When either the storage capacity of
  • Canon VB-H610D | Operating Guide - Page 145
    ] under [Memory Card] in the setting page (p. 74). • Canon will assume no liability for any accident or damage resulting from use of and the date and time. The following shows the folder structure. Example:H.264 video, manually recorded using a camera with an IP address of 192.168.100.1, on Sept. 10
  • Canon VB-H610D | Operating Guide - Page 146
    070618-070619- M 00 _ 507.mov (1) (2) (3) (4) (1) Video recording date (2) File creation time (UTC) (3) Recording start time (UTC) (4) Recording type E: Event M: Manual recording R: Recording-mode stream T: Timer U: Upload Note • The file creation time will be earlier than the actual start of
  • Canon VB-H610D | Operating Guide - Page 147
    %P Pan position -179.99 - 180.00 0 %T Tilt position -179.99 - 180.00 0 %Z Zoom position 0.01 - 300.00 0 %V Camera server VB-H41/VB-H610VE/VB-H610D/VB-H710F %y Year of capture time 2001 - 2031 %m Month of capture time 01 - 12 %d Day of capture time 01 - 31 %w Day of week of
  • Canon VB-H610D | Operating Guide - Page 148
    „ Available Modifiers The modifiers that can be used for each setting item are specified below. [HTTP Upload] (p. 58) [Parameter (query string)] All modifiers can be used. [FTP Upload] (p. 58) [Subdirectory Name to Create] Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used. [File Name to Create]
  • Canon VB-H610D | Operating Guide - Page 149
    Troubleshooting Before contacting the dealer where you purchased the product or Canon's Customer Service Center, check the items specified as follows. If a log message is displayed, check the details of the message and corresponding countermeasure in the log message list. Problem Countermeasures
  • Canon VB-H610D | Operating Guide - Page 150
    Problem that lets the administrator use audio. • In VB Viewer, audio cannot be used if the Canon Network Camera Audio Receiver 3.0 add-on is not to [Save Log], change it to [Save Logs and Videos]. • To manually save recordings to an SD memory card, obtain camera control privileges. Files cannot
  • Canon VB-H610D | Operating Guide - Page 151
    List of Log Messages Log Messages on the Camera W031 Transmitted video data size [info] Log messages are classified into the following types. Description %1= host=, user=, video=: (W031) Category Level Code Fault level %1 W: WebView session, V:
  • Canon VB-H610D | Operating Guide - Page 152
    „ Application (Uploader) Messages A004 Starting and stopping of uploader [info] Description %1 uploader (A004) %1 Starting or stopping Meaning The uploader was started or stopped. A040 Number of uploads (MAIL) [notice] Description uploader mail: normal=%1 test=%2 (A040) %1 Number of
  • Canon VB-H610D | Operating Guide - Page 153
    initialized. Countermeasure If the problem persists after rebooting the camera, the camera is faulty, arrange for servicing. „ Application (Audio time settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user level used when connecting. 49: Check
  • Canon VB-H610D | Operating Guide - Page 154
    number Meaning The settings could not be updated. The audio server stops. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. „ Application (Video-Related) Messages V001 Starting and shutdown of video server [info] Description %1 video (V001
  • Canon VB-H610D | Operating Guide - Page 155
    fail. (V321) Meaning An error occurred in the pseudo mode setting of intelligent service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. V400 Video input initialization error [crit] Description video %1 fatal error - %2 (V403) %1 Video
  • Canon VB-H610D | Operating Guide - Page 156
    Description shutdown extio (S013) Meaning The external device input/output service was shut down. S014 Timer service started [info] Description starting timer (S014) Meaning The timer service was started. S015 Timer service shut down [info] Description shutdown timer (S015) Meaning The
  • Canon VB-H610D | Operating Guide - Page 157
    %2 Cause of error %3 Error information Meaning An internal error occurred in the timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S307 Error on saving settings [err] Description (vbadmin.c XXX) Can't update system settings
  • Canon VB-H610D | Operating Guide - Page 158
    of error Meaning An error occurred in the initialization of the timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S413 Timer service runtime error [crit] Description timer working error [%1] (S413) %1 Error number Meaning An
  • Canon VB-H610D | Operating Guide - Page 159
    List of Viewer Messages Messages Displayed in the Information Field Messages displayed in the information field of the viewer are classified into the following three types. Icon Category Information Message Explanation Help messages on various buttons, pull-down lists, etc., as well as frame
  • Canon VB-H610D | Operating Guide - Page 160
    [Audio] button has been clicked when there is no audio device or the audio device has been disabled in the PC. Failed to initialize Canon Network Camera Audio Receiver. ActiveX plugin is not installed within ten seconds after clicking the [Audio] button. restricted. Image display for Digital PTZ
  • Canon VB-H610D | Operating Guide - Page 161
    operate the camera via the network. In this case, press the reset switch at the back of the camera. 1 For VB-H610VE/VB-H610D, remove the dome case. For dome case removal, see the "Installation Guide" included with the camera. 2 Turn off the camera. There is no on/off switch on the camera. Turn the
  • Canon VB-H610D | Operating Guide - Page 162
    is used (See "Performing Initial Settings for the Camera" (p. 28)). VB-H41 VB-H710F Reset Switch Reset Switch VB-H610VE Reset Switch 4 For VB-H610VE/VB-H610D, attach the dome case. For dome case attachment, see the "Installation Guide" included with the camera. VB-H610D Reset Switch 162
  • Canon VB-H610D | Operating Guide - Page 163
    192.168.100.1 255.255.255.0 Enable Enable Enable Enable 64 Disable Disable Disable public VB-H41 VB-H610 VB-H710 Item Setting Installation Location • Current Date and Time • Setting Setting Method Set manually Auto-Setting of NTP Server Disable NTP Server Time Zone (GMT+09:00) Osaka
  • Canon VB-H610D | Operating Guide - Page 164
    Item Setting • External Input Device 1 Device Name (alphanumeric characters) • External Input Device 2 Device Name (alphanumeric characters) • External Output Device 1 Device Name (alphanumeric characters) • External Output Device 2 Device Name (alphanumeric characters) • JPEG Video
  • Canon VB-H610D | Operating Guide - Page 165
    Item Setting • Video Server Maximum Number of Clients 30 Camera Control Queue Length 30 Maximum Connection Time 0 (sec.) Camera Control Time (sec.) 20 • Audio Server Audio Transmission from the Camera Disable Input Volume 50 Voice Activity Detection Disable Audio Reception from
  • Canon VB-H610D | Operating Guide - Page 166
    Item E-mail Notification External Device Output Day/Night Mode Switching • Timer 2 Timer Event Start Time End Time Repeat Interval Video Record E-mail Notification External Device Output • Timer 3 Timer Event Start Time End Time Repeat Interval Video Record E-mail Notification External Device Output
  • Canon VB-H610D | Operating Guide - Page 167
    Item Setting 12: / 128 Yes 13: / 128 Yes 14: / 128 Yes 15: / 128 Yes 16: / 128 Yes 17: / 128 Yes 18: / 128 Yes 19: / 128 Yes 20: / 128 Yes • IPsec IPsec Auto Key Exchange • Auto Key Exchange Settings IPsec SA Encryption Algorithm AES->3DES IPsec SA Authentication Algorithm
  • Canon VB-H610D | Operating Guide - Page 168
    Item Setting • IPsec Set 3 IPsec Set Disable IPsec Mode Tunnel Mode Destination IPv4 Address Destination IPv6 Address Source IPv4 Address Source IPv6 Address Security Protocol ESP Security Gateway IPv4 Address Security Gateway IPv6 Address Destination Subnet Mask Length 16
  • Canon VB-H610D | Operating Guide - Page 169
    Item Setting SA ESP Encryption Key (inbound) SA ESP Authentication Key (inbound) SA ESP SPI (inbound) SA AH Authentication Algorithm HMAC_SHA1_96 SA AH Authentication Key (outbound) SA AH SPI (outbound) SA AH Authentication Key (inbound) SA AH SPI (inbound) • Certificates Certificate
  • Canon VB-H610D | Operating Guide - Page 170
    Index A Abandoned Object Detection 109 Access Control 66 Admin Tools 80 Admin Tools Certificate 16, 26 Admin Viewer 126, 135 Administrator 123 Administrator Password 47 AE Mode 51 AGC Limit 53 Aperture 138 Audio Distribution 66, 122 Audio Reception 60, 126, 133 Audio Server 60 Audio
  • Canon VB-H610D | Operating Guide - Page 171
    Address/Subnet 66 Initial Settings 28, 161 Night Mode 53, 139 Input Volume 60 NTP Server 50 Installation Conditions 54 Installation Guide 5 O Installing the Necessary Software 26 Intelligent Function Setting Tool 101 IP Address 47 IPsec 68 IPv4 47 IPv4 Host Access Restrictions
  • Canon VB-H610D | Operating Guide - Page 172
    133 Recorded Video Utility 116 Recording Manually 142 Reference Volume Level 62 Removed 50 Time Zone 50 Timer 64 Top Page 42 Troubleshooting 149 U Unmount 73 Upload 57 User Account 66 Admin Viewer 126, 135 RM-Lite Viewer 18 VB Viewer 127 Viewer PTZ 135 Voice Activity Detection 60
  • Canon VB-H610D | Operating Guide - Page 173
    Avila Camacho, No. 138 PB, Pisos 15, 16 y 17 Col Lomas de Chapultepec C.P. 11000 México, D.F. México CANON SINGAPORE PTE. LTD. 1 HarbourFront Avenue, #04-01, Keppel Bay Tower Singapore 098632 CANON HONGKONG CO., LTD. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
ENGLISH
Network Camera
Network Camera
Operation Guide
Be sure to read this Operation Guide before using the network camera.