Canon VB-M700F Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide
Canon VB-M700F Manual
View all Canon VB-M700F manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon VB-M700F manual content summary:
- Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 1
Network Camera Operation Guide Be sure to read this Operation Guide before using the network camera. ENGLISH - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 2
Introduction Thank you for purchasing a Canon Network Camera VB-M700F/VB-M600D/VB-M600VE (hereafter referred to as VB-M700/ 600 or the camera). The VB-M700F and VB-M600D are for indoor use only. The VB-M600VE can be installed underneath eaves. This Operation Guide explains the camera settings and - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 3
Canon shall have no liability whatsoever for any loss or damages incurred by the user as a result of such problems waste disposal service or visit www.canon-europe.com/environment VB-M700/600 and bundled RM-Lite) contains Open Source Software modules. For details, see "ThirdPartySoftware-E.pdf - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 4
1 Before Use VB-M700F/VB-M600D/VB-M600VE Features 1-2 Camera Software...1-4 Installed Software...1-4 Bundled Software...1-4 Network Video Recording Software (optional 1-5 User Support Tool ...1-5 RM-Lite (See the "Administrator's Manual 1-6 Operating Environment 1-8 VB Initial Setting Tool - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 5
Table of Contents Chapter 2 Initial Settings Preparing the Camera for Use 2-2 Installing the Necessary Software 2-4 Installing the VB Initial Setting Tool 2-4 Installing the Camera Angle Setting Tool 2-4 Performing Initial Settings for the Camera 2-5 Checking the Camera Image 2-6 Chapter 3 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 6
5 Setting Page Setting Menu...5-2 Accessing the Setting Menu 5-3 Setting Menu ...5-3 Items Common to All Setting Pages 5-3 [Network] Setting Administrator Password, LAN, IP Address, DNS, etc 5-5 [Date and Time] Setting Date and Time 5-8 [Camera] Setting Initial Camera Settings and External - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 7
Viewer 7-5 Display Screens of Admin Viewer 7-5 VB Viewer ...7-6 Obtaining Camera Control Privileges 7-6 8 Appendix SD Memory Card Access 8-2 Modifiers ...8-4 Troubleshooting ...8-6 List of Log Messages 8-8 Log Messages on Factory Default Settings with the Reset Switch on the Camera 8-21 List - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 8
along with the name of the reference items. VB-M700F/VB-M600D/VB-M600VE Operation Guide (This Document) (VBM6700OG_E.pdf) This document explains the initial camera settings, Admin Tools settings, viewer operations and troubleshooting, etc. This document is included in the Setup CD-ROM. In the Setup - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 9
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The AC adapter can be connected to VB-M700/600 from a standard AC power outlet. Please check your instruction manual to make sure that your VB-M700/600 is compatible with this adapter. • The - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 10
-Lite in cases requiring a high level of reliability. These features do not guarantee high-precision capture and cannot support applications beyond their intended range of use. Canon will assume no liability for any accident or damage resulting from use of these functions. Notes on Cleaning Warning - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 11
VB-M700F See "Using Camera Housing" in the "VBM700F Installation Guide" to remove the protection plate. VB-M600D VB-M600VE See steps in "Installing the Camera" in the "VB-M600D/VB-M600VE Installation Guide Recessed Mounting Kit (dedicated option for VB-M600D/VBM600VE) Periodically check the brackets - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 12
xii - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 13
1 Chapter Before Use ❏ Camera Features ❏ Software Information ❏ Operating Environment and Precautions - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 14
& white mode in dark conditions at nighttime, in order to support video monitoring in locations with varying levels of illumination. * Before PC for hassle-free adjustment during installation. VB-M700F Configurable zoom/focus settings VB-M600D VB-M600VE Configurable pan/tile/rotation/zoom/ focus - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 15
page to select LINE IN or MIC IN as your desired audio input mode (P. 5-17). *1 Microphones and amplifiers sold separately. *2 Only the RM-Lite Viewer supports two-way audio communication. The VB-M700/600 Viewer only supports audio reception. VB-M700F/VB-M600D/VB-M600VE Features 1 Before Use 1-3 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 16
this tool, you can operate the camera during installation while you view video over the network on a PC. VB-M700F The tool lets you configure zoom, focus, and exposure compensation. VB-M600D VB-M600VE The tool lets you configure pan, tilt, rotation, zoom, focus, and exposure compensation. RM-Lite - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 17
similar purposes. Important The VB-M700F/VB-M600D/VB-M600VE cannot be used with Network Video Recording Software versions older than RM-Lite. Users of VK-64/VK-16 and other legacy software must upgrade to RM-Lite. For details, visit our website. User Support - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 18
the VB-M700F/VB-M600D/VB-M600VE for use with RM-Lite. Supported cameras VB-M700F, VB-M600D, VB-M600VE, VB-M40, VB-C500VD/VB-C500D, VB-C60 Important To add the RM-Lite Viewer, purchase RM-Lite-V (optional). Note For details on the usage and functions of RM-Lite, see the "Administrator's Manual - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 19
connected to the camera can be listened to from the viewer speaker. RM-Lite Viewer Audio Reception (Two-way Communication) VB-M700F/VB-M600D/ VB-M600VE JPEG/H.264 Microphone (Sold separately) Network Speaker (Sold separately) Audio Audio can be transmitted/received between the camera and - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 20
User's Manual, operating environment, etc.), please refer to the Canon Web Site. VB Initial Setting Tool, Camera Angle Setting Tool, VB-M700/600 the PC audio support feature is required. *1 The browser must support JavaScript, XAML browser applications, and IFRAMEs. The VB Viewer requires cookies. - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 21
intranet sites on Internet Explorer is set to [High] by default. Thus, when accessing the VB-M700/600 Viewer or the camera's Setting Page, a display correctly. To correct this problem, follow the procedure below to register the top page as a trusted site. 1 Access the VB-M700/600 Viewer and the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 22
box does not appear, JavaScript is sometimes disabled under the standard security settings, which may limit operations on the setting page and the VB-M700/600 Viewer. Register the page as a trusted site as this automatically enables JavaScript settings. If the content block dialog box does not - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 23
In Windows Server 2008, the sound function is disabled by default. To receive audio with the VB-M700/600 Viewer, follow the steps below to enable "Administrator's Manual." Note If [Control Panel] is in the classic view, double-click [Sound]. 2 Click [Sound]. 3 When the [Audio Service Not Running] - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 24
1 - 12 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 25
2 Chapter Initial Settings ❏ Preparing the Camera for Use ❏ Initial Setting Tool Installation ❏ Initial Settings - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 26
for the Camera" (P. 2-5) ▼ Checking images When initial settings are complete, access the camera via a web browser and check the image using the VB Viewer. "Checking the Camera Image" (P. 2-6) ▼ Setting the Camera Angle Use the Camera Angle Setting Tool to set the camera angle via PC operation - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 27
Preparing the Camera for Use Operating 2 Initial Settings If an error message appears or the camera fails to operate correctly, see the error message and log message information in "Chapter 8 Appendix." Log messages can be viewed in "Tool" (P. 5-32) in the setting page or the Admin Tools "Log - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 28
Installing the Necessary Software Installing the VB Initial Setting Tool Install the VB Initial Setting Tool to perform initial 2 Click [Next] and follow the on-screen instructions to install. 2 Click [Next] and follow the on-screen instructions to install. When installation is complete, an icon - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 29
VB Initial Setting Tool] from the [Start] menu. 3 Select a MAC address, and then click [Initial setting]. Click to select 4 Enter the user name "root" and factory default setting password the camera ("Part Names" in the "Installation Guide"). The VB Initial Setting Tool cannot be used with cameras - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 30
Viewer]. The viewer launches and displays the camera image. If the top page of the camera does not appear or the VB Viewer does not launch, see "Troubleshooting" (P. 8-6) in "Chapter 8 Appendix." Important • The camera image cannot be checked until the network settings in the PC are configured for - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 31
3 Chapter Camera Angle Setting Tool ❏ Camera Angle Setting Method ❏ Creating a Camera Specification File to Manage Multiple Cameras - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 32
the camera angle when installing the camera or to change the capture orientation according to the situation. VB-M700F You can set zoom, focus and exposure compensation*. VB-M600D VB-M600VE You can set pan, title, rotation, zoom, focus and exposure compensation. * The exposure compensation (P. 7-12 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 33
with a Camera List (P. 2-5). [Administrator Password] Enter the administrator password for the camera (P. 2-5). [Enable SSL port number to 80, 443 or in the range of 1024 to 65535. Normally [80] (factory default setting) is used (P. 5-18). 3 Click [Yes] at the following message. Note When the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 34
The camera specification file will be loaded and camera names listed will be displayed under [Camera List]. Connecting to the Next Camera on the List Click [Next] to disconnect the camera currently connected and connect to the next camera on the list. Camera list Camera to be connected next - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 35
Display Screen of Camera Angle Setting Tool VB-M600D VB-M600VE 6 2 1 3 4 5 VB-M700F 7 89 2 Setting the Camera Angle 3 Aq from [Display Screen Size] from the [Display] menu. 3 Control Assist VB-M600D VB-M600VE Displays dotted lines showing the range of pan operation and tilt operation. - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 36
the Camera Angle You can operate pan, tilt, rotation and zoom operations in VB-M600D/VB-M600VE to set a desired camera angle. VB-M700F allows zoom operation only. Set Using the Operation Buttons and Sliders VB-M600D VB-M600VE Click each of the [Pan], [Tilt], [Rotation] buttons to set the camera - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 37
Angle Note VB-M600D VB-M600VE • One check whether the camera is focusing correctly. • Focus ranges (rough guide) are shown in the table below. Focus Mode Fixed at infinity the camera's Exposure Mode (P. 7-12) was set to [Manual], it will be changed to [Auto] after setting exposure compensation - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 38
password (factory default setting is "camera"). SSL communications: 1 No SSL communications: 0 (factory default setting is 0). Registered Name Host Name 1st row Header row → From 2nd row Camera information for 1 camera per line (up to 30 cameras) ↓ RegisterName B1F VB-M700F 1Fa VB - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 39
,PortNumber,UserName,Password,ConnectType 3 B1F VB-M700F,192.168.100.1,80,root,camera1,0 1Fa VB-M600VE,192.168.100.2,80,root,camera2,0 1Fb VB-M600D,192.168.100.3,80,root,camera3,0 2Fa VB-M600D,192.168.100.4,80,root,camera4,0 2Fb VB-M600D,192.168.100.5,80,root,camera5,0 3Fa VB-M700F,192.168 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 40
3 - 10 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 41
4 Chapter Top Page of the Camera ❏ Accessing the Setting Page, Admin Tools and Viewer ❏ Certificate Registration - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 42
This "Operation Guide" explains relevant operations using the IP address 192.168.100.1 (factory default setting). You need to enter the actual IP address set for the camera when following instructions. The top Page (Setting Menu) Link 3 Admin Tools Link 4 Admin Viewer Link 5 VB Viewer Link 4-2 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 43
see "Overview of Viewer" in "Chapter 7 Admin Viewer/VB Viewer" (P. 7-2). Setting Page authentication window Admin Tools/Admin Viewer authentication window The factory default setting user name and password are: User name: root Password: camera (The user name "root" is the administrator account - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 44
Certificate Registration In order to use [Admin Tools] and [Admin Viewer], you must first install the two certificates issued by Canon Inc. on your PC. The certificates are stored on the Setup CD-ROM. Follow the procedure below to register the certificates using Internet Explorer. 1 Insert - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 45
5 Chapter Setting Page ❏ Administrator Password and Network Detailed Settings ❏ Camera Date and Time Settings ❏ Camera Name and Initial Camera Settings Information ❏ Settings for Items Requiring Rebooting ❏ Maintenance (Displaying Log and Setting Information/Rebooting/Factory Default Settings) - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 46
what can be set from each setting page is listed as follows. See each setting page for details. Setting Menu • Network Administrator password, LAN, IPv4, IPv6, DNS and SNMP Settings (P. 5-5) • Date and Time Camera date and time and time zone settings (P. 5-8) • Camera Camera name, initial - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 47
by accessing the camera in the web browser. First, access the top page of the camera (P. 4-2). For details on entering the user name and password, see P. 4-3. 5 Setting Page Setting Menu You can access each setting page and Admin Viewer from the Setting Menu. 12 Items Common to All Setting - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 48
Returning to the Setting Menu Click [Settings menu] at the top right of each setting page to return to the Setting Menu. Important • Do not change the settings of one camera with multiple setting pages opened at the same time. • Do not use the [Back] or [Forward] buttons in the web browser to - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 49
password. Do not forget the new password. • Press the reset switch to restore factory default settings if you have forgotten the administrator password 1 [IPv4 Address Setting Method] Select [Manual] or [Auto (DHCP)] in the address setting method. If [Manual] is selected, directly enter the values - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 50
case, see "Performing Initial Settings for the Camera" (P. 2-5) and use VB Initial Setting Tool to set the address again. • The camera may if settings are changed in [IPv6], [IPv6 Address (Manual)], [Prefix Length] or [IPv6 Default Gateway Address]. Check beforehand the precautions in "Important" - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 51
by default for VBM600D/VB-M600VE. 5 [Installation Location] Set information regarding the installation location of this camera. Setting information can be referenced by the SNMP manager. Note • The information set in the camera is read-only from the SNMP manager. • Use the SNMP Manager that supports - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 52
[Time] Set the following according to the selection made in [Setting Method]. [Set manually] Set the desired date and time. The date is set by - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 53
, metering mode, smart shade control and white balance for the camera startup. • Day/Night Set the day/night switching mode. • Installation Conditions VB-M700F Set LED to On/Off. • External Device Name Set the external input device name and external output device name. [Auto (Flickerless)] In this - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 54
bulbs. Important • The initial camera settings 1 to 5 define the defaults that apply when the camera is started. Setting changes will be see if the problem improves. Day/Night 1 [Mode] Set Day/Night mode to [Manual] or [Auto]. If [Manual] is selected, it is possible to switch manually between [Day - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 55
[Camera] Setting Initial Camera Settings and External Device Name Installation Conditions VB-M700F [LED Setting] Select [Turn Off] or [Turn On] for the LED operation status on the camera. Set to [Turn Off] if you do not want - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 56
[Video] Setting Image Size, Quality and Frame Rate The following can be set here. • Initial Camera Settings Set to add intelligent function information (except volume detection) to JPEG headers. • JPEG Set the image quality, size, maximum frame rate and upload size in JPEG. • H.264 Set the bit rate - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 57
[Video] Setting Image Size, Quality and Frame Rate On-screen display Aq [Color of text outline] Select [Black], [Blue], [Cyan], [Green], [Yellow], [Red], [Magenta] or [White] for the color of text outline. Aa [Color depth of text and outline] Select [Fill text and outline], [Make text only - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 58
] (P. 5-12) to [320 x 240] or less. • HTTP upload does not support SSL/TLS. • If the camera is set to perform upload or e-mail notification continuously, the proxy server (factory default setting is [80]). 6 [Proxy User Name], [Proxy Password] Enter the user name and password of the proxy server. - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 59
If [Loop] is set under [File Naming], enter the maximum number of loops in the range of 0 to 9999. 3 [User Name], [Password] Enter the user name and password required for authentication. 4 [PASV Mode] Select [Enable] or [Disable] for the PASV mode when uploading via FTP. 5 [File Upload Path] Enter - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 60
characters). 3 [Mail Server Port] Enter the port number of the SMTP server (factory default setting is [25]). 4 [Sender (From)] Set the e-mail address of the sender to click [Apply]. For a password, first click [Exec], then [Apply] the password. [User Name], [Password], [POP Server] If [POP - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 61
3600. 1 [Audio Transmission from the Camera] When [Enable] is selected, the audio input through the microphone attached to the camera can be transmitted to the VB-M700/600 Viewer. 2 [Input Volume] Set the volume of input for the microphone connected to the camera in the range of 1 to 100. The - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 62
Audio cannot be sent from the VB Viewer or the Admin Viewer (P. 1-7). • Connect under "Audio Input/Output Terminals" in the "Installation Guide." 4 [Global Address for the Web Page] If the range of 1024 to 65535. Normally [80] (factory default setting) is used. 3 [HTTPS Port] Set the HTTPS port - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 63
[Event] Setting Image Buffer, Volume Detection, Audio Playback and Timer The following can be set here. Volume Detection 5 • Image Buffer Set the items associated with the temporary saving of images in the image buffer. Setting Page • Volume Detection Set the operation to be performed at the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 64
8 [E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification is performed when a volume detection event occurs. To use this function, the [E-mail Notification] sub-menu must also be set from the [Upload] menu (P. 5-16). Important • - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 65
[Event] Setting Image Buffer, Volume Detection, Audio Playback and Timer 3 [Repeat Setting] If [Enable] is selected, timer events will be generated according to settings in 4 [Repeat Interval] and 5 [Repeat Count]. 4 [Repeat Interval] Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.] [5 min.] - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 66
" (P. 7-2). IPv4 Host Access Restrictions 1 [User Name], [Password] Enter the user name and password and then click [Add]. The authorized user will be added IPv4 host access restrictions to [Disable] or [Enable]. 2 [Default Policy] If IPv4 host access restrictions are applied, select [Authorize Access] - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 67
be set. • If host access restriction is set mistakenly, access to the setting pages themselves may be prohibited, in which case restoring the factory default settings will become the only means for recovery. Note If the same address is duplicated, the policy for the address that appears highest on - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 68
Validity Period (min)] Set the duration of validity for ISAKMP SA (factory default setting is [480]). IPsec Set (Auto Key Exchange) IPsec Sets 1 settings for use with IPsec can be selected as [Auto Key Exchange] or [Manual]. Auto Key Exchange Settings 1 [IPsec SA Encryption Algorithm] Set the IPsec - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 69
If [Security Protocol] is set to [ESP] or [ESP and AH] in IPsec Set (Manual) 5, 8 [SA ESP Encryption Algorithm] to Ag [SA ESP IPsec Sets 1 to 5 are [AES], [3DES], [DES] or [NULL] according to the encryption algorithm supported by the device to connect to. Normally [AES] or [3DES] is - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 70
be set. A h [SA AH Authentication Algorithm] Set the AH authentication algorithm to [HMAC_SHA1_96] or [HMAC_MD5_96] according to the authentication algorithm supported by the device to connect to. A j [SA AH Authentication Key (outbound)] Set the SA authentication key for outbound. If [HMAC_SHA1_96 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 71
[Create Self-Signed Certificate] After entering each of the following settings, click [Exec] to create a self-signed certificate. Follow the instructions in the message and reboot. The certificate created will take effect after rebooting. Note Creating a certificate takes time, so it is recommended - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 72
7 [Self CA Certificate] Used for the purpose of testing SSL communications, but otherwise not normally used. 8 [Backup] Click [Exec] to perform a backup of the certificates and private key. This operation can only be performed via SSL communications. 9 [Restore] Installs the certificates and private - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 73
and SDHC memory cards can be used with the VB-M700/600. When an SD memory card is inserted an SD Memory Card" in the "Installation Guide." Be sure to perform the unmount process when [Save Log and Images] is selected, when a network problem occurs during uploading, images will be saved to the SD - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 74
SD Card Information 1 [SD Card Recognition] Displays the status of the SD memory card. The three status messages are [SD Card Not Inserted], [Unmounted] and [Mounted]. 2 [SD Card Operation Status] Displays the operation status of the SD memory card. The three status messages are as follows. • " - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 75
[LAN Interface], [Maximum Packet Size], [IPv4 Address Setting Method], [IPv4 Address], [Subnet Mask], [IPv4 Default Gateway Address], [IPv6], [Auto], [IPv6 Address (Manual)], [Prefix Length], [IPv6 Default Gateway Address], [HTTP Port] and [HTTPS Port]. 1 [LAN] LAN interface, maximum packet size - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 76
] The camera is rebooted. 4 [Restore Settings] Discard user-defined settings and restore all setting items to factory default settings except camera administrator password, network setting, date, time, time zone, SSL certificate and encrypted communications. Executing this operation will reboot the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 77
6 Chapter Admin Tools ❏ Privacy Mask Setting ❏ Intelligent Function Setting ❏ Viewing Logs - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 78
Admin Tools Overview Admin Tools consists of the applications for [Privacy Mask Setting Tool], [Intelligent Function Setting Tool], and [Log Viewer]. You can set the camera remotely, check the operating condition, acquire logs, and perform other operations with ease. Admin Tools (P. 6-3) This is - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 79
Tools. Also, the first time one of the Admin Tools is launched, an authentication window is shown. Enter a user name and password. Important The certificates issued by Canon Inc. must be registered on any PCs using [Admin Tools]. See "Certificate Registration" in "Chapter 4 Top Page of the Camera - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 80
Privacy Mask Setting Tool A tool that lets you cover certain areas on the camera image with privacy masks. You can set privacy masks for up to eight areas while checking the image on the camera. Display Screen of Privacy Mask Setting Tool 1 Image Display Area The image currently captured by the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 81
Privacy Mask Setting Tool 6 [Smart Shade Control] Smart shade control can be operated if the control Setting the Privacy Mask Area privileges have been obtained. Smart shade control operations are the same as in the Admin Viewer. For details, see "Setting the Smart Shade Control" Set the privacy - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 82
4 Confirm privacy mask areas. Saved privacy mask areas are shown in the image display area and privacy mask display area. Image Display Area Enabled privacy mask areas are shown filled with color. Disabled privacy mask areas are just shown in a frame. Privacy Mask Area Privacy masks for which the [ - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 83
Intelligent Function Setting Tool This tool is used to set intelligent functions that perform uploads, notify the viewer, audio playback, etc., if a change has occurred in the captured image due to movement of a subject. Camera E-mail notification 6 Admin Tools Volume Moving object Camera - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 84
Abandoned Object Detection Detect objects that are carried in and abandoned for a certain amount of time. This function can be used to detect objects that have been left. Abandoned object detection is triggered when an object is left in the detection area for a specified duration. Background - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 85
is required. If constant and maximum reliability is required for surveillance it is not recommended that you use this function. Canon shall assume no liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations. Display Screen of Intelligent - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 86
• [Detection Settings of the Same Type] Show the detection areas or detection results for the same type of detection settings as those selected in the detection setting list. • [Do not display] No detection areas or detection results are shown. 8 [Restart intelligent function] If the background - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 87
Intelligent Function Setting Tool 6 Check the detection result. Setting Intelligent Function Detection Settings You can check the detection status of the specified detection settings in the event display panel of the Admin Viewer (P. 7-14). Setting Detection Criteria ([Detection Criteria] - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 88
audio playback volume in the range of 1 to 100. Setting Detection Areas Set detection areas in the image display area. Setting a [Rectangular] detection area By default, a rectangle is shown in the image display area. Move or resize that rectangle to set a detection area. 6 - 12 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 89
Intelligent Function Setting Tool Setting a [Polygonal] detection area Specify polygonal areas with a maximum of 32 angles. Click in the image display area to form the polygon point by point. Click again at the first point to complete the polygon and set it as a detection area. The set area can - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 90
Detect criteria for [Removed Object Detection] Set detection areas for objects whose removal you want to detect. For [Duration (Sec)], set the time that must elapse after the object has been taken away. Detected mode will be triggered to ON when an object is taken away from the detection area for a - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 91
Log Viewer This tool lets you view the operating condition log of the camera. Display Screens of Log Viewer 1 2 3 4 5 6 6 Admin Tools 7 8 Aq 9 As Aa Ad Af Ag Ah 1 [Download] Download log files from this camera or SD memory cards. 2 [Reload] Reload the displayed log file and show - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 92
Ad [Date & Time] Set the date and time of the log you want to show using the filter function. Select the [Specify start date & time] or [Specify end date & time] checkbox to set the date and time. Af [Apply filter] Show the filtered logs in the log display area. Ag [Search for] Enter the character - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 93
memory are cleared when you perform [Maintenance] > [Restore Settings] and [Reboot], or press the reset switch on the camera. Note [Application], [HTTP Server], and [System] support the log message list List of Log Messages (P. 8-8). 6 - 17 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 94
6 - 18 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 95
7 Chapter Admin Viewer/VB Viewer ❏ Differences between the Admin Viewer and the VB Viewer ❏ User Authorities and Camera Control Privileges ❏ Viewer Startup and Operation ❏ Camera Control and Obtaining Camera Control Privileges ❏ Admin Viewer Operation and Settings - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 96
types of viewer are available, the Admin Viewer and the VB Viewer. VB-M700/600 Viewer Admin Viewer VB Viewer Important Use the RM-Lite Viewer to display H.264 Users with privileged camera control can use this viewer. Password authentication is required. Authorized users must have privileged - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 97
. Note • The factory default setting gives privileged camera control to [Authorized User] as well. • If all guest user authorities are disabled, the user authentication dialog box will appear when the VB Viewer is launched. When an authorized user or administrator name and password are entered, the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 98
. Important • The Canon Inc. Certificate must Guide explains relevant operations based on the IP address "192.168.100.1" (factory default setting). You must enter the actual IP address set for the camera when following instructions enter the user name and password. Refer to "User Authentication" - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 99
Compensation) button This button turns on/off backlight compensation. This control is effective when the image is dark due to backlight. Admin Viewer/VB Viewer Aa [Get a Snapshot] button A still image from the moment of clicking is displayed in a new window. As [Viewer PTZ] button The viewer - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 100
button is used to obtain/release the camera control privileges. * With the VB Viewer, you can only obtain the camera control privileges. Camera Control Privilege Waiting for control privileges When waiting for control privileges in the VB Viewer, the remaining standby time is shown on the control - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 101
Changing the Image Size You can set a desired image size for video received from the camera. Select from [160x120], [320x240], [640x480] or [1280x960]. Admin Viewer/VB Viewer This is a guide to the basic operations of the camera. These operations can be carried out in both the Admin Viewer and the - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 102
the camera in the full screen mode. Right-click on the screen and select the necessary panel from the menu that appears. Admin Viewer VB Viewer [Viewer PTZ] The viewer PTZ panel is displayed. (Admin Viewer only) [Control] Displays the camera control panel. [Event Display] Displays the event - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 103
will be lost. In the VB Viewer, the video size and display screen size will also return to the default settings. 7 Receiving Audio first time the volume panel is launched, a message to install the add-on "Canon Network Camera Audio Receiver" will be displayed in the information bar of the web - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 104
Performing Operations and Settings as the Administrator The operations and settings that can be performed only in the Admin Viewer are explained. Magnifying Part of the Image (Viewer PTZ) You can use the Viewer PTZ panel to magnify part of the camera's image in the image display area. Click the [ - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 105
PTZ panel./The image disappears from the Viewer PTZ panel." 7 under "Troubleshooting" in "Chapter 8, Appendix" and confirm the settings. • To area will be reflected in full screen mode as well. Admin Viewer/VB Viewer Opening/Closing Control Items Clicking the title of a control item will - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 106
your subject. • Refer to the notes on P. 3-7 for focus ranges when Night Mode (P. 5-10, P. 7-14) is enabled. 1 Exposure Mode Select from [Auto], [Manual], [Auto (Flickerless)] or [Auto (Shutter-priority AE)]. If [Auto] is selected for [Day/Night] under [Camera] in the Setting page (P. 5-10), select - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 107
the exposure to the center of the screen because the subject is Admin Viewer/VB Viewer receiving a spotlight or backlight, etc. 1 [Auto] 4 [Shutter Speed] The white balance is adjusted automatically. When [Manual] or [Auto (Shutter-priority AE)] is selected 2 [Light Source] for the exposure - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 108
Example of Setting Method: Irradiate a white subject (white paper, etc.) using the light source and capture the subject over the entire screen. In this condition, select [One-shot WB]. Important • Since the light source selection options are based on representative characteristics, proper colors may - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 109
Detection] in the Setting Menu is detected, the icon turns green. Example: Volume Detection status ON Performing Operations and Settings as the Administrator 7 Admin Viewer/VB Viewer 7 - 15 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 110
7- 16 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 111
8 Chapter Appendix ❏ SD Memory Card Access ❏ Modifiers ❏ Troubleshooting ❏ List of Log Messages ❏ List of Viewer Messages ❏ Restore Settings ❏ List of Factory Default Settings ❏ Index - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 112
Administrator password (factory default setting: 192.168.100.1) (factory default setting: root) (factory default setting: camera) SD Memory Card Directory Configuration The SD memory card is mounted as the directory name "CANON" under "/mnt/card" in the camera's internal memory. Subdirectories - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 113
00" to "99," which are created under "camera IP address/mnt/card/CANON/UPLOAD." When either the storage capacity of the SD memory card or the longer needed. Log Files Log files are saved in "Camera's IP address/mnt/card/CANON/LOG" with the file names "MSG" and "MSG.1" to "MSG.5". "MSG" is - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 114
number 1 %D Camera name Setting for [Camera Name (alphanumeric characters)] %P Pan position 0 %T Tilt position 0 %Z Zoom position 0 %V Camera server VB-M700F / VB-M600D / VB-M600VE %y Year of capture time 2001 - 2031 %m Month of capture time 01 - 12 %d Day of capture time 01 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 115
Available Modifiers The modifiers that can be used for each setting item are specified below. [HTTP Upload] (P. 5-14) [Parameter (query string)] All modifiers can be used. [FTP Upload] (P. 5-15) [Subdirectory Name to Create] Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used. [File Name to Create - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 116
Troubleshooting Before contacting the dealer where you purchased the product or Canon's Customer Service Center, check the items specified as follows. If a log message is displayed, check the details of the message and corresponding countermeasure in the log message list. Problem Countermeasures - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 117
Troubleshooting Problem Countermeasures The image disappears from the Viewer PTZ panel. • The Check the network and PC for abnormality. • Reboot the PC and connect again. You forgot your password. • You can initialize all settings of the camera excluding date and time using the reset switch - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 118
List of Log Messages Log Messages on the Camera Log messages are classified into the following 5 types. Category alert crit err warning notice info Level Error Error Error Warning Warning Information Code 5xx 4xx 3xx 2xx 1xx 0xx Fault level Hardware-level failure (System operations will stop) - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 119
name> not found (W101) Meaning The camera was accessed by an unauthorized user. W102 Invalid password [notice] Description user password mismatch (W102) Meaning The password is invalid W111 Invalid host [notice] Description host access denied (W111) Meaning The - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 120
A042 Number of uploads (HTTP) [notice] Description uploader http: normal=%1 test=%2 (A042) %1 Number of normal uploads. %2 Number of test uploads. Meaning Shows the number of uploads executed. A120 Resolution of upload destination name failed [notice] Description uploader cannot resolve - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 121
- %1 (A470) %1 Error number Meaning The uploader could not be initialized. Countermeasure If the problem persists after rebooting the camera, the camera is faulty, arrange for servicing. Application (audio server) messages B001 Starting and shutdown of audio server [info] Description - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 122
or invalid operation mode (4a). Countermeasure 41: Check user name, password or user list used when connecting. 42: Check playtime or maximum connection time settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user level used when connecting. 49: - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 123
The audio device could not be initialized. The audio server stops. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. B402 Audio server initialization failed [err] Description audio initialization error [%1] (B402) %1 Error number Meaning - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 124
. (V321) Meaning An error occurred in the pseudo mode setting of intelligent service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. V400 Video input initialization error [crit] Description video %1 initialization failure - %2 (%3) (V400 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 125
video input function was stopped because a video input command could not be processed. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. V402 Video input frozen [crit] Description video %1 stalled (V402) %1 Meaning Video number The video input - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 126
to ftpd) %2 User Name %3 IP address Meaning A wrong password was specified in user authentification. H145 Connection denied due to host changed. S010 Event service started [info] Description starting event (S010) Meaning The event service was started. S011 Event service shut down [info - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 127
Countermeasure None S240 Camera error [warning] Description serviceman call (S240) Meaning A camera error occurred. Countermeasure Camera needs to be serviced. S306 Error on saving settings [err] Description Can't update system settings (S306) Meaning An error generated while the system - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 128
%3 Error information Meaning An internal error occurred in the timer service. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S410 Event service initialization error [crit] Description event initialization error [%1] [%2] (S410) %1 Error - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 129
[%1] (S413) %1 Error number Meaning An error occurred while the timer service was running. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. S501 Fan stop detected [alert] VB-M600VE Description FAN rotation speed is less than 150rpm. (S501 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 130
. The [Audio] button has been clicked when there is no audio device or the audio device has been disabled in the PC. Failed to initialize Canon Network Camera Audio Receiver. ActiveX plugin is not installed within ten seconds after clicking the [Audio] button. Image display for Viewer PTZ use is - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 131
of the camera or your Administrator password, you cannot operate the camera via the network. In this case, press the reset switch at the back of the camera. 1 For VB-M600D/VB-M600VE, remove the dome case. For dome case removal, see the "VB-M600D/VBM600VE Installation Guide." 2 Turn off the camera - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 132
also be restored to factory default settings including the camera's IP address, subnet mask, default gateway address, etc. VB-M700F Reset Switch 4 For VB-M600D/VB-M600VE, attach the dome case. For dome case attachment, see the "VB-M600D/VBM600VE Installation Guide." VB-M600D Reset Switch VB - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 133
Time Zone Setting root camera admin Auto 1500 Manual 192.168.100.1 255.255.255.0 Enable Enabled 64 Setting 1 (year/month/day) Setting 2 (year/month/day) 8 Appendix Disable Disable public VB-M700F VB-M700 VB-M600D VB-M600 VB-M600VE Set manually (GMT+09:00) Osaka, Sapporo, Tokyo 8 - 23 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 134
Night Mode Switching Brightness Response (sec.) • Installation Conditions VB-M700F LED Setting • External Input Device 1 Device Name ( of text and outline Setting Camera Auto Disable 1/100 0 Center-Weighted Disable Auto 255 255 Manual Standard 20 Turn On Do not add 3 3 3 3 320 x 240 30.0 320 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 135
E-mail Notification Notification Mail Server Name Mail Server Port Sender (From) Recipient (To) Authentication User Name Password POP Server Subject Message Body List of Factory Default Settings Setting Upload Disabled Notification Only with HTTP Setting 1 (year/month/day) Setting 2 (year/month - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 136
Item • Image Server Maximum Number of Clients Maximum Control Queue Length Maximum Connection Time (sec.) Camera Control Time (sec.) • Audio Server Audio Transmission from the Camera Input Volume Voice Activity Detection Audio Reception from the Viewer Output Volume Echo Canceller Audio Input • HTTP - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 137
Disable 00:00 Disable 1 sec. 1 Disable 00:00 Disable 1 sec. 1 Disable 00:00 Disable 1 sec. 1 Disable 00:00 Disable 1 sec. 1 Disable Disable List of Factory Default Settings Setting 1 (year/month/day) Setting 2 (year/month/day) 8 Appendix 8 - 27 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 138
Account User Name Password User List • User Authority Authorized User Privileged Camera Control Camera Control Image Distribution Audio Distribution Guest User Camera Control Image Distribution Audio Distribution • IPv4 Host Access Restrictions Apply Host Access Restrictions Default Policy Network - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 139
) Setting Auto Key Exchange AES->3DES HMAC_SHA1_96 480 AES->3DES SHA1 Group 2 480 Disable Tunnel Mode ESP 16 16 AES HMAC_SHA1_96 HMAC_SHA1_96 List of Factory Default Settings Setting 1 (year/month/day) Setting 2 (year/month/day) 8 Appendix 8 - 29 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 140
Item • IPsec Set 2 IPsec Set IPsec Mode Destination IPv4 Address Destination IPv6 Address Source IPv4 Address Sender IPv6 Address Security Protocol Security Gateway IPv4 Address Security Gateway IPv6 Address Destination Subnet Mask Length Destination Prefix Length IKE Pre-Shared Key SA ESP - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 141
Tunnel Mode ESP 16 16 AES HMAC_SHA1_96 HMAC_SHA1_96 Disable Tunnel Mode ESP 16 16 AES HMAC_SHA1_96 HMAC_SHA1_96 Not Installed Disable Save Log List of Factory Default Settings Setting 1 (year/month/day) Setting 2 (year/month/day) 8 Appendix 8 - 31 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 142
22 Admin Tools 6-2 Admin Viewer 7-5, 7-10 Administrator 7-3 Administrator Password 5-5 AE Mode 5-9 Aperture 7-13 Audio 5-17 Input Volume 3-7, 5-9, 7-12 External Device Input Displaying 7-14 Setting 5-20 F Factory Default Settings 8-21 List of Settings 8-23 Restore 8-21 Focus 3-7, 7-12 - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 143
5-12 Initial Settings 2-5, 8-21 Installation Conditions 5-11 Installation Guide viii Intelligent Function Setting Tool 6-7 IP Address 5-18, 5- the External Device Output 7-14 P Pan 3-6 Parameters 5-14, 8-4 Password 4-3 PoE Supply 8-21 Prefix 5-23 Privacy Mask Setting Tool 6-4 R - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 144
12 Tilt 3-6 Time 5-8 Time Zone 5-8 Timer 5-20 Top Page 4-2 Troubleshooting 8-6 U Upload 5-14 User Account 5-22 User Authentication 4-3, 7-3 User VB Initial Setting Tool 2-4 VB Viewer 7-6 Video Quality 5-12 Video Size 7-5, 7-6 Viewer Admin Viewer 7-5, 7-10 RM-Lite Viewer 1-6 VB - Canon VB-M700F | Network Camera VB-M700F/VB-M600D/VB-M600VE Operation Guide - Page 145
MONTRÉAL 8801 Trans Canada Hwy, St. Laurent Québec H4S 1Z6 • If you have any questions, call the CANON CANADA Customer Information Centre toll-free at 1-800-OK-CANON (652-2666) (Canada only) CANON MEXICANA, S. DE R.L.DE C.V. Boulevard Manuel Avila Camacho, No. 138 PB, Pisos 15, 16 y 17 Col Lomas de
ENGLISH
Network Camera
Operation Guide
Be sure to read this Operation Guide before using the network camera.