Canon VB101 User Manual

Canon VB101 Manual

Get Canon VB101 PDF manuals and user guides View all Canon VB101 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon VB101 manual content summary:

  • Canon VB101 | User Manual - Page 1
    IN JAPAN User's Manual NETWORK CAMERA SERVER VB101 NETWORK CAMERA SERVER VB101 User's Manual aSafe Use of Equipment Before Using the VB101 1 Installation 2 Setup Procedures 3 VB Administration Tools 4 Creating Web Pages 5 Using the Picture Recording Function 6 Troubleshooting 7 Appendix Please
  • Canon VB101 | User Manual - Page 2
    Introduction Thank you for purchasing the Canon Network Camera Server VB101 (referred to hereafter as the VB101). This manual describes how to set up and use the VB101. Read this manual carefully before using the VB101 to ensure effective operation. In particular make sure that you read the "aSafe
  • Canon VB101 | User Manual - Page 3
    Operational Instructions a WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. a CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FDA regulation This network camera server has
  • Canon VB101 | User Manual - Page 4
    Network Camera Server VB101 with the instructions, may cause dealer or an experienced radio/TV technician for help. Use of shielded cable is required to manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon
  • Canon VB101 | User Manual - Page 5
    INSTRUCTIONS In these safety instructions, the word "equipment" refers to the Canon Network Camera Server VB101 and all its accessories. 1. Read Instructions - All the safety and operating instructions recommended in this manual as they may of the mast and supporting structure, grounding of the
  • Canon VB101 | User Manual - Page 6
    - NATIONAL ELECTRIC CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) operation instructions. Improper adjustment of other controls nearest Canon all power sources including batteries, and supplier. Do not continue to use the refer servicing to qualified service equipment as
  • Canon VB101 | User Manual - Page 7
    - The equipment emits any smoke, heat, abnormal noise, or unusual odor. - A metal object falls into the equipment. - The equipment is damaged in some way. 23. Please observe the following when using the equipment. Failure to do so can result in a fire or electric shock. - Do not use flammable sprays
  • Canon VB101 | User Manual - Page 8
    shock. 3. Wipe with a dry cloth. 4. When you have finished, plug the AC adapter back in to the wall outlet. Icons Used in This Instruction Manual c Indicates important information that must be observed or actions that are prohibited during an operation. These notes must be read to Note prevent
  • Canon VB101 | User Manual - Page 9
    INSTRUCTIONS 5 4 Maintenance 8 Chapter 1 Before Using the VB101 Features of the VB101 14 System Configuration 16 Hardware and Software Requirements 18 Webview Livescope Viewer Software 18 VB Administration Tools 18 VBCollector 18 Webview Livescope MV version 2.0/LE 19 Compatible Cameras
  • Canon VB101 | User Manual - Page 10
    59 Chapter 4 VB Administration Tools Overview of VB Administration Tools 62 80 Setting Presets 82 Log Viewer 85 Downloading Log Files 85 Viewing the Log 86 the Java Viewers 93 Features of the Helper Viewer 95 Viewing Sample Pages 96 Using the Java Viewer to Distribute Videos ...... 97
  • Canon VB101 | User Manual - Page 11
    the download capacity 141 Chapter 7 Troubleshooting Troubleshooting 144 Log Messages 146 Appendix Specifications 158 External Device I/O Terminals 159 Using the Enclosed Software 160 Restoring the Factory Default Settings 160 Upgrading the Firmware Remotely 161 Factory Default Setting
  • Canon VB101 | User Manual - Page 12
    12
  • Canon VB101 | User Manual - Page 13
    1 Chapter Before Using the VB101 This chapter contains information that you should read before using the VB101. It also describes the features of the VB101, the system configuration, the hardware and software requirements, and the name and functions of the system components.
  • Canon VB101 | User Manual - Page 14
    distributed under conditions that best suit the network bandwidth. ISimultaneous video reception by up to 40 users Up to 40 clients can view videos simultaneously with a single VB101 unit. IRemote camera control from the viewer Two types of viewer software are provided: Helper Viewer and Java Viewer
  • Canon VB101 | User Manual - Page 15
    remotely without going to the location where the VB101 is installed. IPlenty of expandability The VB101 includes 2 card slots, allowing a modem or and send it to specific email addresses. IStrengthened security function 1 Passwords can be used to restrict destinations where videos are sent. Up
  • Canon VB101 | User Manual - Page 16
    need to be downloaded. This Viewer is recommended for users who use it frequently. Because it supports the HTTP protocol, the Helper Viewer penetrates firewalls unscathed. c Note G To connect the VB101 to the Internet, you require a leased line connection to an Internet service provider or a LAN
  • Canon VB101 | User Manual - Page 17
    VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2.C8AMERA VC-C4 VC-C4 VC-C4 VB101 VB101 Ethernet (10/100Mbps) 1 Before Using the VB101 The WebView Livescope MV software (→ P.19) is convenient if there are several VB101 installed on a LAN and you wish to concentrate on monitoring videos from them. The
  • Canon VB101 | User Manual - Page 18
    viewer is installed on the VB101 and is automatically downloaded by the client at access. * This software may not run stably on operating manual for the viewer software is on the supplied CD-ROM(Mon-E.pdf). VB Administration Tools (→ P.62) This tool lets you create panorama pictures from the VB101
  • Canon VB101 | User Manual - Page 19
    2000 (SP 1.0 or later) / Windows XP Microsoft Internet Explorer 5 or later required Compatible Cameras (Sold separately) 1 Before Using the VB101 Canon Communication Camera VC-C4 (NTSC/PAL) Canon Communication Camera VC-C4R (NTSC/PAL) e Tip GThe wide-angle converter WL-37 is available as an
  • Canon VB101 | User Manual - Page 20
    installer) AdmSetup.exe (VB Administration Tools installer) CltSetup.exe (VBCollector installer) IniVB101.exe (Tool for factory default settings) inivb101.elf (Tool data for factory default settings) vbrfu.exe (Remote firmware upgrade utility) VB101V3E.pdf (PDF file of this manual) Mon-E.pdf (Helper
  • Canon VB101 | User Manual - Page 21
    -B LED 1 (Shows the operation status for card slot B) Normal operation lit green During access lit orange Power Slot-A Slot-B VB 101 100 Tx/Lnk Col/Rx Before Using the VB101 100 LED (Shows the Ethernet 100/10 operation mode) 100Base-TX lit green 10Base-T off Tx/Lnk LED (Shows the
  • Canon VB101 | User Manual - Page 22
    connector terminal for initial setup and servicing (RS-232C) Camera control connector CC1, CC2 (RS-232C, with one touch lock) Video input sockets V1, V2 (RCA pin-jack) Video input sockets V3, V4 (BNC connector) e Tip 22 The video cable supplied with the Canon Communication Camera VC-C4/VC-C4R
  • Canon VB101 | User Manual - Page 23
    2 Chapter Installation This chapter explains how to connect the system components and describes a sample network configuration.
  • Canon VB101 | User Manual - Page 24
    the precautions given in "aImportant Safety Instructions". AC Outlet VB101 AC adapter AC cable c Note G Refer also to the enclosed ReadMe file. The ReadMe file may contain important information not included in this manual. Be sure to read this file. G If the VB101 will not be used for some
  • Canon VB101 | User Manual - Page 25
    connecting the VB101 and the camera should be no longer than 15 meters (49 ft. 2 19/32 in.), as stipulated in the RS-232C standards. If the cable length exceeds 15 meters (49 ft. 2 19/32 in.), system operation is no longer guaranteed. G The video cable supplied with the Canon Communication Camera VC
  • Canon VB101 | User Manual - Page 26
    the VC-C4/VC-C4R can be used with the VB101. This enables control of up to 4 cameras from a single VB101. 1 2 VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4- :1T.IO4-N2.C8AMERA CC1 V1 V2 V3 V4 Example of 4 cameras cascade connected to 1 camera control connector CC1-1 VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2.C8AMERA
  • Canon VB101 | User Manual - Page 27
    "user name: password@" before the IP address, as in "ftp:// root:[email protected]/card/htdocs". The FTP user is restricted to the system administrator (→ P.32). The VB101 does not support anonymous FTP. G Use only flash memory cards recommended by Canon. See http://www.canon.com/webview/ for
  • Canon VB101 | User Manual - Page 28
    IP address for the VB101, a BOOTP server is required. Sample Dialup Environment Configuration Viewer PC Modem Public switched telephone network Call 123-4567 Modem card Insert modem card. VB101 192.168.101.2 is set. PPP local : 192.168.101.1 PPP remote : 192.168.101.2 This example shows the
  • Canon VB101 | User Manual - Page 29
    Sample Network Configurations LAN plus Dialup Environment Viewer PC IP 192.168.100.2 Modem Public switched telephone network VB101 Modem card Call 123-4567 IP 192.168.100.1 Viewer PC PPP local : 192.168.101.1 192.168.101.2 is set. PPP remote : 192.168.101.2 2 This example shows the
  • Canon VB101 | User Manual - Page 30
    30
  • Canon VB101 | User Manual - Page 31
    3 Chapter Setup Procedures This chapter describes the procedures from the initial setup of the VB101 through to operation checking and the method for specifying detailed settings. The VB Administrator Tools described in Chapter 4 provide a convenient way to set view restrictions and presets.
  • Canon VB101 | User Manual - Page 32
    -ROM. Network connection settings are made via an easy Wizard-style process. 2 Confirming Operation VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2.C8AMERA P.35 After the initial settings have been made, the VB101 must be checked to be sure it operates normally. Use the Web browser to access the sample page
  • Canon VB101 | User Manual - Page 33
    the connection port. 2 Switch the VB101 off and then 3 on again.(→ P.24) Setup Procedures On some PCs you may have to select a port other than COM1. Check the port number to which the serial cable is connected. 3 Enter "VB101" (Factory default setting) as the password . 4 Enter the IP address
  • Canon VB101 | User Manual - Page 34
    .168.100.1/admin/ 3 The Settings Title Page is displayed. Settings Title Page 2 Enter the user name and password. User name: root (default setting) Password: VB101 (default setting) The user name and password can be changed on the System Setting page. (→ P.39) c The IP address "192.168.100.1" is
  • Canon VB101 | User Manual - Page 35
    IP Note address must be changed to match your system settings. 2 Click on each sample page. If the sample page appears and the video is displayed, the VB101 is operating 3 normally. Sample page Setup Procedures Example of the Java Viewer * The picture displayed in the viewer is an example
  • Canon VB101 | User Manual - Page 36
    setting for "path" is "admin". 2 Enter the user name and password. You are now asked for your user name and password. In the factory default settings, the user name is "root" and the password is "VB101". Enter these settings. These can be changed at any time from the "System Settings page
  • Canon VB101 | User Manual - Page 37
    is displayed instead of this button. "Restore to previous VB101 Config" button Click this button when you want to cancel the changes you have made to the settings page. All the changes are discarded and returns to its previous values. Setup Procedures If no settings have been changed, these
  • Canon VB101 | User Manual - Page 38
    . Up to 15 ASCII characters can be used (space or printable characters). The default setting is "VB101". "Confirm Password" Confirms the password in the field above. Ethernet The same settings can be specified on the Network settings page. "Use Ethernet" Tick this checkbox to use Ethernet. "Address
  • Canon VB101 | User Manual - Page 39
    characters). The default setting is "VB101". "Confirm Password" Confirms the password in the field above. Setup Procedures Settings Web you forget the administrator ID and password, you will have to return the VB101 to a service center. Please contact your Canon dealer. Click the [OK] button
  • Canon VB101 | User Manual - Page 40
    Bootp server after restart. If you select "Manual server has been started up. Contact the network administrator for the IP address, subnet mask, and default VB101 via Ethernet and it may only be possible to recover the problem by using the initial setup tools to correct the error. G Turn the VB101
  • Canon VB101 | User Manual - Page 41
    Password" Enter the password to be used when Primarily Call (PPP) is selected. "Confirm Password" Re-enter the password you entered above to confirm the password where the VB101 will be set for the VB101 side. "PPP password that match those included in this list. (Passwords the VB101 will continue
  • Canon VB101 | User Manual - Page 42
    network through a router. When using both Ethernet and PPP, set the route as needed. "Default route" The same setting can be made at "Default after the auto dial-up router. Internet Router ISDN/leased line/ ADSL, etc VB101 Click the [OK] button to change the settings. To discard the changes,
  • Canon VB101 | User Manual - Page 43
    view restrictions (→ P. 73). Common Settings "Main Camera" Specifies the camera selected when the VB101 starts up. "Baud rate of camera control port CC1/CC2" For CC1 and CC2, select the same baud rate as that set on the camera. On the VC-C4/VC-C4R, the default setting is 9600.There is basically
  • Canon VB101 | User Manual - Page 44
    you tick the "Apply View restriction" option, the settings below are enabled. Use this setting to prevent clients from seeing certain camera angles. Using the VB Administration Tools is a convenient way to set the view restrictions (→ P.73). "Upper value, Lower value, Left value, Right value" Sets
  • Canon VB101 | User Manual - Page 45
    camera pan, tilt and zoom ratio (field of view angle) settings. IControllable range and Video Capture Range + Setup Range and Video Capture Range for Each Camera VC-C4 Controllable range Angle Pan control attempt to manually change the camera head angle of the VC-C4/VCC4R. If the camera head is
  • Canon VB101 | User Manual - Page 46
    (field of view angle). When you set the view If the zoom is set to wide-angle restriction, the angles of camera and the angle of camera movement movement are automatically remains the same, video capture restricted. extends beyond the permitted range. Consequently, the angle of movement is
  • Canon VB101 | User Manual - Page 47
    to 15 alphanumeric characters. Setup Procedures "Camera" Selects the camera for which the preset position is set. "Camera Parameter" Use this to easily from the VB Administration Tools. Please use the VB Administration Tools for the settings (→ P.79). G If "Restrict Camera Control to Presets"
  • Canon VB101 | User Manual - Page 48
    triggered by schedule". The factory default setting gives priority to "Recording not perform if there is no memory card in the VB101 slot. G The data size that can be recorded and video quality (→ P.43), and the subject. As a guide, approximately 5-10 KB is the standard when the video capture size
  • Canon VB101 | User Manual - Page 49
    an "OFF" event is detected from an external device. "Camera Position" Selects the camera angle used when pictures are recorded. Select "Not specified", event. Specify a value between 10 and 600 seconds as the sampling interval. "Output to External Device 1/2" Tick this check box Setup Procedures
  • Canon VB101 | User Manual - Page 50
    Detail Settings e Picture Recording triggered by External Devices Tip ON OFF Picture Recording A B C DE G Picture recording triggered by an external device can be performed based on the timing of ON and OFF events or by recording pictures between ON event and OFF event. OFF ON OFF ON VC-C4
  • Canon VB101 | User Manual - Page 51
    , this setting specifies the delay time for the camera to stabilize before still picture is captured. "Output to External Device 1/2" Select this check box if output to external 3 device 1/2 is to occur at the time given below. Setup Procedures "Output Time (sec.)" Sets the duration for
  • Canon VB101 | User Manual - Page 52
    authorized users to the list by entering their account name and password. Authorized/Restricted Host Specification (→ P.53) "Authorized/Restricted Host server. "Authorize access by listed users only" When this option is ticked, only users registered in the list are permitted to connect to the VB101
  • Canon VB101 | User Manual - Page 53
    entries toward the top and general entries toward the bottom. G If the given address does not belong to any of the entries, access is authorized. Setup Procedures 53
  • Canon VB101 | User Manual - Page 54
    all hosts. Avoid entry !0.0.0.0/0.0.0.0 in particular wherever possible. c Note G The default value for "mask" is 255.255.255.255. G If you do . G To prohibit access over HTTP connection via a proxy server, the address of the proxy server must be set. G If you set the host restriction
  • Canon VB101 | User Manual - Page 55
    camera control protocol. Enter an integer between 1 and 65535. The default setting is 65311. "Maximum Number of Clients" Sets the maximum number of clients that can be connected simultaneously from the WebView Livescope Viewer. Enter an integer from 1 to 40. "Restrict Service the camera. " camera
  • Canon VB101 | User Manual - Page 56
    Port" Sets the TCP port number for the VIEWWindows 1.21 video transmission protocol. The default setting is 5111. "Camera Control Port" Sets the TCP port number for the VIEWWindows 1.21 camera control protocol. The default setting is 5110. "Switcher Control Port" Sets the TCP port number for the
  • Canon VB101 | User Manual - Page 57
    HTTP Server "HTTP Port" Sets the TCP port number for the HTTP. Enter an integer between 1 and 65535. The default setting VB101 (see p.115), enter a global address here, and this will let you view sample pages (→ P.96). DNS 3 Sets the domain name server address. Setup Procedures "Name Server
  • Canon VB101 | User Manual - Page 58
    to files. Tick the "Forward" option to send the log messages to a Syslog server host. Tick the "Mail" option to send the log messages by email. c will not operate unless a flash memory card is inserted into the slot on the VB101. G See Chapter 7 (→P.146 ) for log message details. G The log message
  • Canon VB101 | User Manual - Page 59
    to a schedule. You can also select a combination of the two. "Camera" Select camera by which the pictures were recorded. e We recommend that you make a note of current server settings before you Tip restore the default settings in "Restore Settings" (→ P.160). Click the [Cancel] button to
  • Canon VB101 | User Manual - Page 60
    Detail Settings 60
  • Canon VB101 | User Manual - Page 61
    , make presets, view logs, and use the Admin Viewer. Although view restriction and preset settings can be made following the procedures described in Chapter 3, the VB Administration Tools and their more visual environment make the settings much easier.
  • Canon VB101 | User Manual - Page 62
    Administration Tools is an application that simplifies the management and operation of the VB101. VB Administration Tools comprises "VBAdmin Startup Panel" and "Panorama Creation Tool," "View Restriction Tool," "Preset Setting Tool," "Log Viewer," and "Admin Viewer" applications. Operations such as
  • Canon VB101 | User Manual - Page 63
    setting of preset camera positions. Presets can be set by operating the mouse while referring to panorama previews. 4 VB Administration Tools Log Viewer (→ P.85) Admin Viewer (→ P.88) This tool enables viewing of operation status logs that are output to the VB101
  • Canon VB101 | User Manual - Page 64
    Tools require that Microsoft Internet Explorer 5.0 or later be installed. Before installing VB Administration Tools, check to be sure that the correct version of Internet Explorer has been installed. To Install... 1 If any other applications are running, please
  • Canon VB101 | User Manual - Page 65
    listed below have been installed. Please uninstall these applications before installing VB Administration Tools: G WebView Livescope Helper Viewer ver. 3.10 or earlier G WebView Livescope Camera Server G WebView Livescope Manager G WebView Livescope MV Manager ver. 1.0 G WebView Livescope MV
  • Canon VB101 | User Manual - Page 66
    title page that has been set in the VB101. (The default setting is "admin".) I Proxy *Please consult with the network admninistrator for proxy settings. [Use HTTP Proxy Server] Select this item if the connection to the VB101 is to pass through a proxy server. [Host Name] Specify the host name or IP
  • Canon VB101 | User Manual - Page 67
    If the connection is disconnected after the VB Admin Startup Panel has started up, choose Connect from the File menu. The Server Setting dialog box then appears. e If the connection to the VB101 is made through a proxy server, the Panorama Creation Tool, Log Viewer, and Admin Viewer cannot be
  • Canon VB101 | User Manual - Page 68
    Panorama Creation Tool The Panorama Creation Tool is used to take and create panorama pictures for the VB101. When they have been created, the panorama picture can be viewed when accessed from the viewer. VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2.C8AMERA
  • Canon VB101 | User Manual - Page 69
    in a dialog box. 6 Panorama picture display Shows the panorama picture that was captured. VB Administration Tools 2 Reload Camera Information button Recaptures camera information and panorama information. If VB101 settings were changed after this tool was started up, this button can be used to
  • Canon VB101 | User Manual - Page 70
    area of panorama picture is captured and displayed during capturing, if the VB101 is accessed from the viewer and pictures are viewed, even when and displaying panorama pictures. To Capture... 1 In the Camera Selection box, select the camera to be used for capturing, select the AE lock position
  • Canon VB101 | User Manual - Page 71
    from the Server menu. 4 When the panorama picture is updated, the VB101 automatically restarts and the connection with VB VB Administration Tools with a different camera. You can exit Panorama Creation Tool while still connected or without reconnecting to the VB101. Click the Remove
  • Canon VB101 | User Manual - Page 72
    and enter the file name. In both cases, only the JPEG format is supported. Displaying Connection Information Connection information during connection with the VB101 can be displayed. Choose Connect Information from the Server menu and a dialog box showing the connection information appears. The IP
  • Canon VB101 | User Manual - Page 73
    The View Restriction Tool is used to set view restriction visually and more easily for the VB101. The viewing range is simply set using mouse operations such as dragging, while viewing the . Only the range set in the view restriction is displayed in the viewer. VB Administration Tools 73
  • Canon VB101 | User Manual - Page 74
    Send button. 4 Cancel button This button can be clicked during communication with the VB101 to cut the connection. 5 Panorama Preview Displays the panorama picture of the camera currently selected at the VB101. The frames that reproduce the values of all the view restriction settings are displayed
  • Canon VB101 | User Manual - Page 75
    view restriction. The zoom value of the selected camera angle is obtained using the Get Value button. VB Administration Tools 9 Admin Viewer button This button between this tool and the VB101. c Note Edited content will not be reflected in the viewer accessed to the VB101 at the stage when the
  • Canon VB101 | User Manual - Page 76
    the panorama picture can be used to set view restrictions. To Make Settings... 1 From the Camera Selection box, select the camera to be set, and select Apply the View Restriction. Set the view restrictions by using the set values button is clicked, the values will be reflected in the VB101. 76
  • Canon VB101 | User Manual - Page 77
    select Apply the View Restriction. Click the Admin Viewer button to start it up. 4 VB Administration Tools 2 Use Admin Viewer to move the camera angle to the position you want to set with the Upper, Lower, Left, Right, values button is clicked, the values will be reflected in the VB101. 77
  • Canon VB101 | User Manual - Page 78
    actual picture. In this event, since Admin Viewer normally operates the camera irrespective of the view restriction settings, please choose [View Restriction] click the Send and then Reflect set values button to reflect in the VB101. G View restriction is not applied to the values with entry boxes
  • Canon VB101 | User Manual - Page 79
    Preset Setting Tool The Preset Setting Tool more easily and uniformly sets the preset function of the VB101. Settings can be made using simple mouse operations such as clicking and dragging while referring to the panorama picture. VC-C4 fC:4O-M64MmUmNIC1A:1T.
  • Canon VB101 | User Manual - Page 80
    the preset settings that were sent by clicking the Send button. 4 Cancel button This button can be clicked during communication with the VB101 to cut the connection. 5 Preset Selection box Select the preset to be set. 6 For Picture Recording only Select whether the settings can be used by
  • Canon VB101 | User Manual - Page 81
    . 9 Camera Selection Box The camera to be used to apply preset settings is selected or changed from among the cameras connected to the VB101. 10 other factor. VB Administration Tools 11 Get Value button When the Get Value button is clicked, the current angle of the selected camera is retrieved
  • Canon VB101 | User Manual - Page 82
    Selection box, select the preset to be set and enter a name in Preset Name. Next, select a camera from the Camera Selection box. Drag the Preset Preview frame shown on the panorama picture to move or change its shape and set values button is clicked, the values will be reflected in the VB101. 82
  • Canon VB101 | User Manual - Page 83
    Preset Name. Click the Admin Viewer button to start it up. VB Administration Tools 4 2 Use Admin Viewer to move the camera angle to the position you want to set preset camera angle, then click the Get Value button. The preset camera position set can be checked in the Preset Values Entry box
  • Canon VB101 | User Manual - Page 84
    Preset Setting Tool e Tip G If view restrictions are to be used, be sure that the Preset Preview Frame (yellow) does not protrude outside the View Restriction Frame (blue). G Since the previews using the Panorama Preview may be slightly different from the actual picture, after the presets have
  • Canon VB101 | User Manual - Page 85
    first to make log settings on the VB101 so that logs will be written into a file on the VB101. Also, Log Viewer is used only for viewing logs; it cannot save or delete logs. (See p.58 for details.) VB Administration Tools Downloading Log Files To Download... 1 4 When Log Viewer is started up from
  • Canon VB101 | User Manual - Page 86
    Log The following content is displayed in the log. GCode The log displays error codes. For error codes, refer to page 146 of the User's Manual. Error codes are displayed with one of four types of icons according to level. Information level Warning level Error level Unknown G Date & Time The date
  • Canon VB101 | User Manual - Page 87
    A0" will be displayed. VB Administration Tools [Date & server (→ P.150) These log messages refer to the system's HTTP server. G System: Log messages related to the system (→ P.152) These log messages refer to the OS, network, or firmware upgrades. G Driver: Log messages related to the driver
  • Canon VB101 | User Manual - Page 88
    Livescope window appears, click the "File" then the "Connect". The "Camera server address setting" dialog box appears. Enter the following items: G Host Name (The IP address set on the VB101, → P.33, 38) G User Name (root, → P.38) G Password (→ P.38) Then click the "OK" button. The video will then
  • Canon VB101 | User Manual - Page 89
    When the Setup properties dialog box appears, click the Display option tab. Check to be sure the Display notification message for external device input check box is selected, then 4 click OK. A message appears in the event a change occurs in the external device input status. VB Administration
  • Canon VB101 | User Manual - Page 90
    The ON/OFF status of external device output can be changed. To Set External Device Output... 1 2 Click the Control button to capture camera control privilege, then choose External Device Output from the Privilege menu. The External Device Output dialog box appears. The external device output
  • Canon VB101 | User Manual - Page 91
    5 Chapter Creating Web Pages This chapter describes how to use the VB101 to webcast information. Picture data can be distributed in various ways, including displaying video or still pictures and displaying multiple images on a Web page.
  • Canon VB101 | User Manual - Page 92
    supported and create the Web page for the viewer. HTTP (WWW) server VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2.C8AMERA Camera VB101 Dedicated Web server or VB101 with a URL address terminates in slash, such as http://vb101/sample/, the server will transmit a file that corresponds with the language setting
  • Canon VB101 | User Manual - Page 93
    Netscape Navigator and Microsoft Internet Explorer browsers. The applets are downloaded from the camera server to the Web browser and are then run by the Web Name LiveApplet Glimpse Functions Displays videos from the VB101. Allows camera control. Allows overlays and superimposition of bitmaps in
  • Canon VB101 | User Manual - Page 94
    Web Pages for Video Distribution Java Viewer LiveApplet Video display function Camera control function Click Java Viewer Glimpse Video display function 94
  • Canon VB101 | User Manual - Page 95
    firewalls to access external sites. However, this cannot pass through with the WebView-Tcp protocol (→ P.111). Can be run as a stand-alone application. 5 Click c The VB Administration Tool is used to take panorama pictures. See page 68. Note 95 Creating Web Pages
  • Canon VB101 | User Manual - Page 96
    the actual IP address set for the VB101. 2 The page shown below appears with links to the other sample pages. Click on the link to the sample page you want to view. GExamples of sample pages JavaApplet sample 1 JavaApplet sample 2 This is a LiveApplet sample page which distributes live videos and
  • Canon VB101 | User Manual - Page 97
    > - tags. Use the tag for parameters other than the common attributes for applets (codebase, code, archive, width and height). * The underlined portion is a sample IP address. Enter the actual IP address set for the VB101. Creating Web Pages 97
  • Canon VB101 | User Manual - Page 98
    Viewer e Tip G Writing IP Addresses Using the Web server functions built into the VB101, IP addresses can be expressed as (all brackets) in the two file types (htm,wvh) used by the Web server in the VB101. Since is replaced with the actual IP address when accessed,
  • Canon VB101 | User Manual - Page 99
    Using a Java Viewer to Distribute Videos 1 sample.htm SampleSite LiveApplet < .1/"> * The underlined portion is a sample IP address. Enter the actual IP address set for the VB101. 5 99 Creating Web Pages
  • Canon VB101 | User Manual - Page 100
    how to create a Web page that allows clients to use Glimpse to download quickly and view live video at a low frame rate, and then use LiveApplet to view video at a high frame rate and control the camera when they find videos they are particularly interested in. Click the button to
  • Canon VB101 | User Manual - Page 101
    =450 height=380> * The underlined portion is a sample IP address. Enter the actual IP address set for the VB101. 101
  • Canon VB101 | User Manual - Page 102
    a Web page that only displays live video and has no camera control GUI for situations where you want to prohibit camera control.
  • Canon VB101 | User Manual - Page 103
    the image file displayed. (→ See step 3 on page 27.) Creating Web Pages e Tip G At startup, the default character string that is displayed while a connection to the VB101 is being established is "now connecting...", but there is also a parameter called "connect_msg" for changing this character
  • Canon VB101 | User Manual - Page 104
    Screen 104 specifies whether the frame rate is displayed on the screen. "on
  • Canon VB101 | User Manual - Page 105
    ="http://192.168.100.1"> * The underlined portion is a sample IP address. Enter the actual IP address set for the VB101. Pasting a picture to the background
  • Canon VB101 | User Manual - Page 106
    . If this parameter is omitted, the default disconnection screen is displayed. comment This parameter format for bitmap images (transparent GIFs supported). The "x,y" parameters specify the coordinates of url video_width Specify the URL of the HTTP server for applet access. Specify the IP address
  • Canon VB101 | User Manual - Page 107
    string that is displayed when the connection to the camera server is cut. The default is "disconnected". 5 error_msg Specifies the character string that is displayed when connection to the camera server Yes has failed. The default is "can't connect". Creating Web Pages font_size Specifies the
  • Canon VB101 | User Manual - Page 108
    string to be displayed when a connection to the camera server is disconnected. The default is "disconnected". error_msg Specifies the character string to be displayed when an attempt to connect to the camera Yes server has failed. The default is "can't connect". font_size Specifies the font size
  • Canon VB101 | User Manual - Page 109
    ) is not downloaded. codebase This parameter specifies the directory that contains the applet. http://HTTP server IP address: the LiveApplet drawing area, the applet may not No be displayed correctly. If the camera control function GUI is to be added (controller_style=normal), add about 130 to
  • Canon VB101 | User Manual - Page 110
    e If the VB101 is used as the Web server, the settings described below are not Tip required. Setting Up the Web Server Set up the Web server to be used for providing Web page. Add the MIME type to the Web server software and specify the extension. Refer to the manual for your Web server software for
  • Canon VB101 | User Manual - Page 111
    service. The default setting is 65310 (→ P.55). The default setting will be used if no particular value is specified. G The second line gives the IP address (or host name) of the VB101 and the TCP port number used for the camera control. The default Tip Helper Viewer supports WebView Livescope
  • Canon VB101 | User Manual - Page 112
    of a Web page Using the Helper Viewer This section describes an sample Web page in which the Helper Viewer is used. Helper application launched the image e To use the sample page template in the VB101 to supply videos, Tip specify . 112
  • Canon VB101 | User Manual - Page 113
    also use the WebView-HTTP protocol to provide videos from the camera directly to a Web browser. Some example of this are sample IP adderess. Enter the actual IP address set for the VB101. Displaying a Specified Number Of Live Video Frames As a Video at Access 5 Creating Web Pages The Server
  • Canon VB101 | User Manual - Page 114
    40&t=-10> * The underscored portion is a sample IP address. Enter the actual IP address set for the VB101. IGetStillImage Parameters Parameter p/pan t/tilt z/zoom b/back_light camera_id delay option seq v/image_size q/quality Description Specifies the camera pan angle. "p" is a 1°unit, and "pan
  • Canon VB101 | User Manual - Page 115
    PC VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2.C8AMERA VB101 192.168.100.2 Internet Router 192.168.100.1 Add support for private address 192.168.100.2 (router NAT function). Web server Global address 192.168.1.10 A sample page of the VB101 is automatically generated based on the IP address that was
  • Canon VB101 | User Manual - Page 116
    116
  • Canon VB101 | User Manual - Page 117
    6 Chapter Using the Picture Recording Function This chapter describes a couple of specific examples of the Picture Recording function using the VB101. This function can be used to automatically capture still pictures according to a preset schedule or in response to inputs from an external device.
  • Canon VB101 | User Manual - Page 118
    are recorded on a flash memory card inserted into the VB101. Sample application in combination with a door-opening sensor and lighting and images of the entrance are captured and recorded by the camera. 118 VB101 Connection Example Camera RS-232C cable Video cable (RCA) Dc In Slot-B Slot
  • Canon VB101 | User Manual - Page 119
    Function Linked to an External Device Sample Still Picture Recording Settings Settings specified on the "Camera and Video" page (→ P.43) Specify the appropriate settings for the Camera 1 being used. Settings specified on the "Preset" page (→ P.47) Set a camera angle that redords the open doorway
  • Canon VB101 | User Manual - Page 120
    are recorded on a flash memory card inserted into the VB101. Sample application in combination with a lighting unit This is a are captured and recorded by the camera. Ethernet Lighting unit ON/OFF Camera control and video images VB101 VB101 Connection Example Camera 120 RS-232C cable Video
  • Canon VB101 | User Manual - Page 121
    specified in "Schedule 1-4" (→ P.51) G If you are not using recording triggered from an external device, leave the default priority ("Recording triggered by external device") unchanged. G Set the camera position for recording to Preset 1. G Insert a 5-second delay before recording to allow the
  • Canon VB101 | User Manual - Page 122
    following URL: http://192.168.100.1/sample/lookup/ * Enter the actual IP address set for the VB101. The "Sample Page for the Retrieval of Recorded Pictures the respective parameter. G In "Camera", specify the camera number to be searched. Select "any" to search all the cameras. G In "Capture Period",
  • Canon VB101 | User Manual - Page 123
    the recorded dates and times that meet those conditions appears in window . When you click on one of the listed items, the corresponding pictures and camera settings appear in window . By clicking "Animation" in the list display, you can view all the retrieved pictures in the list continuously as
  • Canon VB101 | User Manual - Page 124
    server Specifies the HTTP server. If this parameter is omitted, the IP address of the client side network . Camera number used for recording. Specify a value from 1 to 4 as the camera number part of the mmddHHMMSS parameter can be omitted. The default settings are 12 for mm, 31 for dd, 23
  • Canon VB101 | User Manual - Page 125
    of the client side network interface is used*1. Specify the IP address of the HTTP server. locale Language used to display the desc command attribute information. Specify "english" for English-language display and "japanese" for Japanese-language display. The default value is "english". When
  • Canon VB101 | User Manual - Page 126
    with the Schedule recording function and copy it, or remove the card, download the picture to a PC and embed the picture in a Web page, an IP address. Enter the actual IP address set for the VB101. ISnapAnimator parameters Parameter image0 time0 Description Specifies the URL of the picture
  • Canon VB101 | User Manual - Page 127
    on which VBCollector is installed, pictures can still be securely saved when the allowable limit on the number of pictures that the VB101 can record and save has been exceeded. Downloaded images can also be easily viewed in the Web browser. Flash memory card VC-C4 fC:4O-M64MmUmNIC1A:1T.IO4-N2
  • Canon VB101 | User Manual - Page 128
    has been installed. To Install... 1 2 If any other applications are running, please exit them before installation. Please also be sure to close the Windows Service Panel. Load the supplied CD-ROM into the CD-ROM drive. Double-click "CltSetup.exe" on the CD-ROM to start up the installer. Click
  • Canon VB101 | User Manual - Page 129
    Using VBCollector 5 Check the settings and items you have selected thus far, and click Next to confirm. The installation will proceed by copying files and making registry settings, etc. 6 Click Finish to complete the installation. When installation is complete, "VBCollector Task View" is added to
  • Canon VB101 | User Manual - Page 130
    use VBCollector, the network camera server (hereafter referred to as "server") from which the VBCollector downloads pictures must be registered. Adding a server Add a new server to which VBCollector will download pictures. To Add a New Server... 1 To add a server, choose Add from the Server menu, or
  • Canon VB101 | User Manual - Page 131
    , or click Browse to select a directory folder. A network path cannot be specified. [Delete images on the server] When this check box is selected, pictures that VBCollector downloaded from the server will also be deleted from the server. I Server information Host Name (→ P.38) Specify an IP
  • Canon VB101 | User Manual - Page 132
    click the Edit button. To delete a registered server, click the Delete button. 2 As with the procedure for adding servers, change all desired items and click OK. c Note Downloaded images are not deleted when a server is deleted. To delete downloaded images, first follow the procedure in "Deleting
  • Canon VB101 | User Manual - Page 133
    to be performed according to the schedule. If not selected, the added task will not be executed. I Server Name Select the server from which the VBCollector downloads recorded pictures. The server will need to have been registered in advance. I Schedule Start Date Set the date which is to be
  • Canon VB101 | User Manual - Page 134
    or more tasks to be executed. VBCollector is also not able to execute multiple tasks simultaneously to the same server. Please take care to ensure that multiple tasks are not executed to the same server by taking such measures as leaving a sufficient time space between the "Start Time" of each task
  • Canon VB101 | User Manual - Page 135
    damaged This task is not currently scheduled for execution. Inconsistencies have occurred in this task's settings and the task will not be executed. G Server Name The server names that were specified at Task Settings are displayed here. G Next Run Time The date and time when the task is to be
  • Canon VB101 | User Manual - Page 136
    . Starting/Stopping the Service The task scheduler service can be started and stopped. To Make Settings... 1 Choose Start Service or Stop Service from the Tools menu. If the service has started, Stop Service is enabled in the menu; if the service is stopped, Start Service is enabled. 2 When
  • Canon VB101 | User Manual - Page 137
    Information. VBCollector includes a function that outputs images to a Web browser to simply viewing. Displaying Images Downloaded images are selected by server name and date, and displayed in a Web browser. To View Pictures... 1 Choose Display Images in the Tools menu. 2 The Image List dialog
  • Canon VB101 | User Manual - Page 138
    images can be deleted. To Delete Images... Choose Delete Image from the Tools menu. In the Image List dialog box, select the name of the server that the VBCollector downloaded the images to be deleted, select the date to be deleted by clicking on it, then click the Delete Image button. 138
  • Canon VB101 | User Manual - Page 139
    and time when the log was generated is displayed here. G Task The name of the task that output the log is displayed here. G Server The name of the server to which the task performs downloads is displayed here. G Message The log's message is displayed here. 139 Using the Picture Recording Function
  • Canon VB101 | User Manual - Page 140
    are required, click Cancel. [Specify Task.] Select if filtering by task name, then enter the task name. [Specify Server.] Select if filtering by server name, then enter the server name. [Error Type] Specify the error type when filtering by error type. G Not Specified Selecting this item disables
  • Canon VB101 | User Manual - Page 141
    when the specified available capacity on a target drive has been reached or the upper limit number of pictures can be set when executing downloads based on a task schedule. To Make Settings... 1 Choose Options from the Tools menu. 2 The Options dialog box appears. Set the value (%) of "Min
  • Canon VB101 | User Manual - Page 142
    Using VBCollector 142
  • Canon VB101 | User Manual - Page 143
    7 Chapter Troubleshooting This chapter explains how to deal with problems that arise with the operation of the VB101 and other faults.
  • Canon VB101 | User Manual - Page 144
    . G If the Power LED stays orange and does not change to green, this indicates that there is a system fault. Restore the factory default settings (→ P.160). If this does not resolve the problem, contact your Canon dealer. The initial setup tools do not work. G Check that the RS-232C cable used for
  • Canon VB101 | User Manual - Page 145
    rate for the serial port on the camera, ensure that the camera control baud rate setting on the VB101 matches the camera settings (→ P.43). I forgot the password. G You will have to return the VB101 to a service center. Please contact your Canon dealer. I cannot record or search pictures. G Check
  • Canon VB101 | User Manual - Page 146
    Camera control system initialization failure (err) Message %1 cannot open camera control port %1 Camera control port (CC1|CC2) Explanation The camera control port cannot be opened. Response If rebooting does not recover this problem, there is a malfunction. Contact an authorized Canon service
  • Canon VB101 | User Manual - Page 147
    C1|VC-C3|VC-C4) %2 Camera number (1-4) 7 %3 Error (read|write|timeout|...) Explanation Camera control device I/O error. Response There is a malfunction if it does not reset automatically. Contact an authorized Canon service representative. Troubleshooting GA014 Access prohibited due to host
  • Canon VB101 | User Manual - Page 148
    Log Messages GA016 Amount of transmitted video data (info) Message %1 %2 %1@%2 %3 frames/%4 bytes in %5 seconds Client type (LS/D | LS/H) Client host IP address %3 Number of frames %4 Number of bytes %5 Video transmission time Explanation This shows the results of video transmission for a
  • Canon VB101 | User Manual - Page 149
    not displayed if the same error occurs repeatedly.) Response If the problem is "busy", no response is required. For "index broken" signal input error or maximum picture size exceeded), check the camera and camera settings. For "no storage device" (memory card not inserted . 7 149 Troubleshooting
  • Canon VB101 | User Manual - Page 150
    read during picture index restoration processing. Response Check the contents of the file. This file is not included in the picture index. HTTP Server Log Messages GH011 File specification error (notice) Message %1 HTTPD: File does not exist: %1 File name Explanation The specified file was not
  • Canon VB101 | User Manual - Page 151
    be damaged. Response Check the memory card and, if necessary, reformat the card. If there is a physical fault on the card, replace the card. 7 151 Troubleshooting
  • Canon VB101 | User Manual - Page 152
    Ethernet interface initialization failed (crit) Message eci: netif can't up Explanation Network interface initialization failed. Response If rebooting does not resolve the problem, contact an authorized Canon service representative. GS002 Ethernet route registration failure (err) Message eci: net
  • Canon VB101 | User Manual - Page 153
    detected during operation. This occurs when a network device with the same IP address as the VB101 is started up after the VB101 was started up. Response As for system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card. 7 153 Troubleshooting
  • Canon VB101 | User Manual - Page 154
    A read error occurred during the file system check. Response If the error is related to the built-in file system, contact your local Canon service agent. If the error is related to the memory card, replace the memory card. GS020 File system checking ended abnormally (err) Message device
  • Canon VB101 | User Manual - Page 155
    occurs only when firmware is erased from the ROM or when firmware is written onto the ROM. Response Contact your local Canon service representative. There due to network error etc. Response The VB101 has restarted, since remote firmware upgrade processing timed out. Depending on the network error,
  • Canon VB101 | User Manual - Page 156
    156
  • Canon VB101 | User Manual - Page 157
    Appendix
  • Canon VB101 | User Manual - Page 158
    mode, view restriction, scheduling of camera control authority (Canon VC-C4, VC-C4R, VC-C3) Connection limitation Access control (password/host), maximum view time, service period, number of concurrent connections (max. 20) Interface Video input Serial port Network Card slot Display LED External
  • Canon VB101 | User Manual - Page 159
    "Picture Recording and External Device I/O Settings Page" in Chapter 3 "Setup Procedures" (→ P.49) for information on the settings. Connect any terminals use optocouplers and are separate from the internal circuit in the VB101. Loads connected to the output terminals should be within the following
  • Canon VB101 | User Manual - Page 160
    check that the power LED is green. To begin the setup procedure again, launch "IniVB101.exe" and then switch the VB101 off and on again as directed by the on-screen instructions. G If you forget the password, you will have to return the VB101 to a service center. Please contact your Canon dealer.
  • Canon VB101 | User Manual - Page 161
    No. of the camera server (Default setting = 80) G Administrator Name: Server administrator user name G Administrator Password: Server administrator password 2 The current version is displayed. 3 Specify the firmware file to be downloaded to the server. 4 Store the downloaded firmware in flash ROM
  • Canon VB101 | User Manual - Page 162
    address PPP account list Dial Method Phone Number User Name Password GGateway Network interface Gateway address GConnection keeping Target Address Interval GCommon Settings Main camera Baud rate Return to Home Position GCamera Settings Camera Name Wide converter Video Signal Video Capture size Video
  • Canon VB101 | User Manual - Page 163
    Factory Default Setting Item GPreset GPicture recording GAccess Control GApplication settings Video Transmission Port Camera Control Port Max Clients Control Queue Length Max Frame rate (fps) Max View Time (sec) Max Camera Control Time (sec) Still Video Capture Delay Wait time (ms) Service time
  • Canon VB101 | User Manual - Page 164
    , 29, 42 DNS 57 Download capacity 141 Error code 86 Event 49, 50, 59, 118 External device 22, 48, 49, 50, 51, 89, 90, 118, 120, 122 Factory default setting 59, 160, 162 Field of view angle 44, 45, 46, 47 Filter 86, 140 Firewall 16, 93, 111 Firmware 161 Flash memory card
  • Canon VB101 | User Manual - Page 165
    Log Viewer 63, 85 Mail 57 Main camera 43 Max No. of pictures to be recorded , 115 Net mask 33, 38, 40 Network 19, 28, 40 No. of days 68 Parameter 47, 97, 106, 114, 124, 125, 126 Password ......... 27, 33, 34, 36, 38, 39, 41, 20, 22, 25, 33, 34 Sample page 35, 57, 96, 112, 115
  • Canon VB101 | User Manual - Page 166
    Index VB Administration Tools 18, 43, 44, 47, 62, 64, 66 VBAdmin Startup Panel 62 VBCollector Windows 36, 38, 56 Web browser 16, 18, 19, 27, 111 Web page 92, 97, 98, 112 Web server 110 WebView Livescope MV 17, 19, 49, 52, 65 WebView Livescope MV LE 17, 19 Wide-angle converter 17, 19
  • Canon VB101 | User Manual - Page 167
    Appendix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
1
2
3
4
5
6
PUB. YT1-1329-000
VB101
NETWORK CAMERA SERVER
VB101
a
Safe Use of Equipment
Before Using the VB101
Installation
Setup Procedures
Using the Picture Recording Function
Troubleshooting
Appendix
Creating Web Pages
VB Administration Tools
NETWORK CAMERA SERVER
User's Manual
Please read this user's manual carefully before operation.
Be sure to read the "
a
Safe Use of Equipment" section before using this equipment.
Store this manual in a readily accessible location for future reference.
E
ENGLISH
User's Manual
IMPRIMÉ AU JAPON
PRINTED IN JAPAN
©CANON INC. 2002
112kSZ0.1
7
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A.,INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CANON U.S.A.,INC. CHICAGO OFFICE
100 Park Blvd., Itasca, IL 60143 USA
CANON U.S.A.,INC. LOS ANGELES OFFICE
15955 Alton Parkway, Irvine, CA 92618 USA
CANON U.S.A.,INC. HONOLULU OFFICE
210 Ward Avenue, Suite 200 Honolulu, HI 96814 USA
l
If you have any questions, call the Canon U.S.A. Information
Center toll-free at 1-800-828-4040(U.S.A.only)
CANADA
CANON CANADA INC.NATIONAL HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7
CANON CANADA INC. CALGARY
2828, 16th Street, N.E, Calgary, Alberla T2E 7K7
CANON CANADA INC. MONTREAL
5990 Cote de Liesse, Montreal, Quebec H4T 1V7
l
If you have any questions, call the Canon CANADA Information
Center toll-free at 1-800-828-4040(Canada only)
MEXICO
CANON MEXICANA, S. DE R.L.DE C.V.
Periferco Sur No. 4124, Col. Ex-Rancho de Anzaldo, C.P. 01900
México, D.F.,México
CENTROY
SURAMERICA
CANON LATIN AMERICA, INC.
6505 Blue Lagoon Drive, Suite 325, Miami, FL 33126, USA
ASIA
CANON SINGAPORE PTE. LTD.
79 Anson Road, #09-01/06, Singapore 079906 Republic of Singapore
CANON HONGKONG CO., LTD.
9/F., The Hong Kong Club Building, 3A, Chater Road, Central, Hong Kong
OCEANIA
CANON AUSTRALIA PTY.LTD.
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
EUROPE
CANON EUROPA N.V.
P.O.Box 2262, 1180 EG Amstelveen, The Netherlands
CANON EUROPE LTD.
6 Roundwood Avenue, Stockley Park, Uxbridge Middlesex,
UB11 1JA, United Kingdom