Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide

Canon Vb-C60 - Ptz Network Camera Manual

Get Canon Vb-C60 - Ptz Network Camera PDF manuals and user guides
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon Vb-C60 manual content summary:

  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 1
    /&5803,$".&3" 0QFSBUJPO(VJEF #FGPSFVTJOHUIFQSPEVDU CFTVSFUPSFBEUIF4UBSU(VJEFBOEUIJT0QFSBUJPO(VJEF
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 2
    Introduction Thank you for purchasing Canon Network Camera VB-C60/VB-C60B (hereafter referred to as VB-C60). The only difference between VB-C60 and VB-C60B is the body color. This Operation Guide describes how to set up and use VB-C60. Read this guide carefully before using VB-C60 to ensure that you
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 3
    do not expose this appliance to rain or moisture. Use of Bundled Software "VK-Lite" (Disclaimer) Malfunction, failure of VK-Lite or other factors may cause problems, such as recording failure, recorded data corruption or loss. Canon shall have no liability whatsoever for any loss or damages incurred
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 4
    standard." Third Party's Software The product (network camera and bundled VK-Lite viewer) contains third party's software modules. For detail Software under GPL and LGPL If you would like to obtain the source code under GPL/LGPL, please contact the dealer, where you purchased the product, or a sales
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 5
    How to Read the Guides viii User's Manual ...viii Icons using in this Guide ix Camera's Top Page x Access Camera's Top Page x Access the Setting Menu xi Access the Sample Pages xi Access the VB-C60 Viewer xii User Authentication for Accessing the Setting Menu or Admin Viewer xiii Chapter
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 6
    Tool 2-27 Log Viewer 2-36 Download Log File 2-36 View Logs ...2-37 Chapter 3 VB-C60 Viewer VB-C60 Viewer Overview 3-2 Major Differences between Admin Viewer and VB Viewer 3-2 User Authority and Camera Control Privilege 3-3 Starting VB-C60 Viewer 3-5 Start up VB-C60 Viewer 3-5 Close VB
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 7
    4-12 Chapter 5 Appendix Modifiers ...5-2 Troubleshooting 5-4 Log Message List 5-6 VB-C60 Log Messages 5-6 VB-C60 Viewer Message List 5-12 Messages displayed in the Information Field 5-12 Restore the Factory Default Settings 5-14 Restore the Factory Default Settings from the Maintenance Menu
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 8
    -ROM). User's Manual Start Guide (enclosed) Operation Guide (this guide) (VBC60OG_E.pdf) Start Guide explains the safety precautions, the types of bundled software, the system requirements, and the software installation instruction, the initial setting and mounting procedures for VB-C60. Sections
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 9
    used to draw reader's attention to particularly important text in this guide. Icon Explanation Important information that must be observed or actions that damage. Supplementary information or a reference to the operation. Users are recommended Tip to read these memos. d Please refer to Start
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 10
    168.100.1" (factory default setting) is used to explain Note how to operate the camera. In actual operation, use the IP address that you set in your VB-C60. Access Camera's Top Page 1. Access http://192.168.100.1/ in the Web browser 2. The camera's top page appears The overview of each link is as
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 11
    Camera's Top Page Access the Setting Menu Click 2 Setting Page to move to the setting page for detailed settings. For details on the Settings Menu, see
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 12
    Camera's Top Page Access the VB-C60 Viewer Click the "Admin Viewer" or "VB Viewer" link under 4 "VB-C60 Viewer" to access the VB-C60 viewer. Admin Viewer VB Viewer xii
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 13
    Camera's Top Page User Authentication for Accessing the Setting Menu or Admin Viewer User authentication is required to access the "Setting Menu" or "Admin Viewer". The factory default setting is as follows. User name : root Password : VB-C60 The user name "root" is the Administrator account of VB-
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 14
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 15
    Chapter Detailed Settings This chapter describes the detailed settings for VB-C60 such as network connection, camera control, date, time and access control.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 16
    Setting Menu for following various camera settings. For details, refer to each page of this manual. ● Setting Menu ● Network Settings for the administrator password, LAN, IPv6, DNS ) ● Access Control Settings for the authorized user account, user authority and host access restriction (➞ P.1-35) 1-2
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 17
    42) ● Maintenance Viewing of the event log and current settings, rebooting the camera, and restoring the factory default settings (➞ P.1-44) Windows Vista/XP Note ● If the "Windows Security " in the "Maintenance" page, follow the instructions of the information bar to disable the pop-up blocker. 1-3
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 18
    via a web browser. To begin with, access to the camera's top page (➞ P.x). For details of entering a user name and a password, refer to page P.xiii. Setting Menu You can access each setting page and the Admin viewer from the Setting Menu. "VB-C60" is displayed as the model name. 3 11222 11122
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 19
    ● If the above network setting is changed and so the viewer cannot reconnect to the camera automatically, links to candidate URIs are displayed. However, you may not be able to connect using the URI, as these are just candidate URIs. In such case, try connecting from VB Initial Setup Tool. 1-5
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 20
    " on the top right of each setting page to return to the Setting Menu. ● Do not open multiple setting pages when changing settings for a single camera Note settings. ● Do not use "Back" and "Forward" of the web browser to move between the setting pages. The old page is displayed due to
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 21
    spaces and printable characters) can be used. The factory default setting is "VB-C60". Be sure to disconnect the Admin viewer or VBAdmin Tools from the camera before changing the password. 2 Confirm Password Enter the same password as above for confirmation. ● For system security, make sure
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 22
    Gateway Address". ● If there are any errors in any of "IP address", "Subnet Mask" or "Default Gateway Address", you may not be able to access the camera via the network. In this case, use the VB Initial Setting Tool v4.0 (➞d Start Guide P.2-9) to configure the address settings again. ● If you change
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 23
    Password, LAN, IPv6 and DNS (Network) ● When using ADSL, the transmission efficiency may be increased by setting a lower Tip value for Maximum Transmission Unit. ● The IP address assigned by "Auto (DHCP)" can be confirmed in VB Initial Setting Tool using the VB-C60 with " camera automatically will access
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 24
    name can be checked from the SNMP manager. When it is blank, default value "VB-C60" is used. 5 Installation Location Enter camera's location information. The entered information can be checked from the SNMP manager. ● The camera's information is read-only from the SNMP Manager. Tip ● Use the SNMP
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 25
    for the date, time and time zone. ▼Current Date and Time Date, Time The date and time set on the camera are displayed. ▼Setting 111111123222222 1 Setting Method Select from "Set Manually", "Synchronize with NTP server", "Synchronize with NTP broadcast" and "Synchronize with computer time". 1-11
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 26
    "Setting Method". Set manually Manually enter the date and NTP server Enter the NTP server IP address, so that the time is currently accessing the camera. The time manually". ● When "Synchronize with NTP server" is selected, if the camera cannot connect to the NTP server because of the wrong IP
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 27
    . ● Installation Conditions Setting for dome use, LED and installation style. ● Camera Position Control Configure whether or not Camera Name Camera Name Be sure to enter the camera name with 15 or less alphanumeric characters, including spaces and printable characters. When using optional network
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 28
    cm. ● The above item 1 and 2 are the initial values used at camera startup. The new settings will be applied when the camera is turned on again or the camera is rebooted. Use the "Control for Admin" panel of VB-C60 viewer to configure the settings used in the actual operating environment (➞ P.3-21
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 29
    and other settings as shown below. Day/Night setting Day mode Night mode Dome Infrared lamp Wide end Tele end Wide end Tele end Not used None 0.3m 5mʙʿ 0.5mʙʿ Point of infinity 1.8mʙʿ 2.4mʙʿ Point of infinity Note) The camera may be out of focus. ● It is recommended to set "Focus Mode" to
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 30
    from "Manual" and "Auto". When specifying "Auto", you can set "Switching Brightness" and "Response" according to the environment where the camera is the brightness frequently changes, for example, light sources pass in front of the camera. Or, specify "5" or "10" for situations, where there are few
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 31
    P.3-25). ● When using the camera with IR light, "Day/Night" should be set to "Manual". IR light cannot be used in camera with an optional indoor dome housing (VB-RD51S-C/S) or when reflected LED lights may be gotten into the shooting frame. 3 Mount Select the camera mount type. The factory default
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 32
    . Before using this function, you need to set the camera's home position using VBAdmin Tool (➞ P.2-18). ▼External Input Device 1 - 2/External characters) excluding double quote " " ". When you are using the Admin viewer, optional network video recorder Tip VK-64/VK-16, or bundled VK-Lite, the device
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 33
    : Image Transmission Select the image size used when transmitting images from "160x120", "320x240" and "640x480". The set image size is used as a default image size for transmitting images to viewers. 3 Maximum Frame Rate: Image Transmission Reduce the viewer load by limiting the maximum frame rate
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 34
    image size smaller or set the image quality lower, in conditions, where the frame rate continues decreasing for a long time. ● If you are using optional network video recorder VK-64/VK-16 or bundled VK-Lite, the image size and quality settings affect the required hard disk space for recording. 1-20
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 35
    not be sent, according to the size of the image data or the network condition to the server. In that case, a message is displayed in the upload and e-mail notification. Tip It is also useful to check settings, including network to the server. • Reduce the size of image files - Set a smaller
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 36
    Enter the proxy server's host name or IP address (using up to 63 characters). 5 Proxy Port Enter the proxy server's port number (The default port number is "80"). 6 Proxy User Name, Proxy Password Enter the proxy server's user name and password. 7 Parameter (query string) Enter the URI parameters
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 37
    to the camera via a proxy server. ▼FTP Upload 1111122222 111111113564722222222 1 Notification The information to be notified is set to "Image data upload with FTP". 2 FTP Server Enter the FTP server's host name or IP address (using up to 63 characters). 3 User Name, Password Enter the user name and
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 38
    create (up to 127 characters) when "File Naming" is set to "User Setting", using interpreted sequences (%) (➞ P.5-2). 7 FTP Upload Test Click "Exec server's host name or IP address (using up to 63 characters). 3 Mail Server Port Enter the SMTP server's port number (The default port number is "25").
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 39
    set to "POP before SMTP", enter the user name and password required for authentication, and the POP server's host name or IP address. User Name, Password When the mail authentication method is set to "SMTP-AUTH", enter the user name and password required for authentication. 7 Subject Enter a subject
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 40
    distribute video. You can set up to 30 clients. When 0 is specified, only the Admin viewer can connect to the camera. 2 Camera Control Queue Length Set the maximum queue length of requests for the camera control privilege from viewers. The maximum value is 30. Enter an integer from 0 to 30
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 41
    1 Audio Transmission from the Camera Specify "Enable" for transmitting audio from a microphone connecting to the camera to VB-C60 viewer. 2 Input Volume the server is not detecting any audio input. It enables to reduce network load. 4 Audio Reception from Viewer Specify "Enable" for outputting audio
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 42
    of the microphone. ● Use the VK-Lite viewer to send audio via VB-C60's audio output terminal. It cannot be sent from the VB-C60 viewer (➞d Start Guide P.1-8). ● Use a speaker with amprifier to connect to the camera (➞d Start Guide P.3-7). ● When "Echo Canceller" is set to "Enable", audio quality and
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 43
    Upload Setting for audio files to be registered. ▼Image Buffer 111111312222222 1 Frame Rate Set the frame rate used when temporarily buffering images in the camera. 2 Pre-event Buffer (number of image frames) Set the number of images to be buffered, which were captured prior to each event. 3 Post
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 44
    . You can switch between enabled or disabled using "Motion Detection Setting Tool" of VBAdmin Tools (➞ P.2-27). 2 ON Event Operation Select whether or not to activate image upload and e-mail notification when the camera detects motion (=ON event). Specify "Enable" to activate those functions when
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 45
    during detecting motion (=ON event). Specify "Enable" so that the camera automatically changes its direction toward a moving subject while the camera is detecting the motion. !2 Maximum Tracking Time (sec.) Set the and OFF event. ● For notes on motion detection use, refer to Start Guide P.xiv. 1-31
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 46
    4 Preset Select preset positions from "Preset1" to "Preset20". When controlling the camera according to events from external devices, first you need to register preset positions using "Preset Setting Tool" of "VBAdmin Tools" (➞ P.2-18), and then specify the corresponding positions from "Preset 1" to
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 47
    Upload" submenu ➞ "HTTP Upload" submenu or "FTP Upload" submenu • E-mail Notification : "Upload" ➞ "E-mail Notification" submenu • Preset : VBAdmin Tools ➞ Preset Setting Tool ➞ "Event" ➞ "External Device Input 1 or2" submenu ➞ "Preset" When image upload is set to enable in "Upload", images
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 48
    Set Image Buffering, Motion Detection, Audio Playback, Interval Timer (Event) Interval timer events according to "Interval Timer" can be a trigger in the interval Tip timer. Following functions can be set when upload and e-mail notification is set to "Enable". • Upload • E-mail notification Settings
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 49
    to the camera. ● User Authority Configure user privileges for authorized users and guest users. ● Host Access Restriction For specifying hosts from which access is authorized or restricted. ▼Authorized U11s1e22r Account 11222 1 User Name, Password You can add authorized users to the "User List
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 50
    Access Privileges (Access Control) ▼User Authority Privileged Camera Control, Camera Control, Image Distribution, Audio Distribution Set user privileges for authorized users and guest users, by checking the items. When recording using optional network video recorder VK, make sure that the "Audio
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 51
    Detailed Settings Set User Access Privileges (Access default settings. ● When using the host access control, you cannot connect to the VB-C60 via IPv6. ● If you change the setting of "Host List" or "Apply the list to HTTP Server", the currently-used browser may become unable to access the camera
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 52
    Set User Access Privileges (Access Control) The Host Restriction function is to restrict is authorized. Example 1: To prohibit access from a host !172.20.0.10 Access from the host with an IP address of 172.20.0.10 is prohibited. Example 2: To prohibit access from hosts in a given address range !172
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 53
    1 IPsec Select whether or not to use IPsec from "Manual" and "Disable". 2 IPsec Mode Select the IPsec operation (IPv4/IPv6) When "Tunnel Mode" is set for 2 IPsec Mode, set the IP address of the security gateway. 7 Destination Prefix Length Destination prefix length is required only
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 54
    8 SA ESP Encryption Algorithm Select the ESP encryption algorithm from "AES", "3DES", "DES" and "NULL" according to the encryption algorithm supported by the destination device. "AES" or "3DES" is recommended to use normally. 9 SA ESP Authentication Algorithm Select the ESP authentication algorithm
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 55
    "HMAC_SHA1_96" and "HMAC_MD5_96" according to the authentication algorithm supported by the destination device. !7 SA AH Authentication Key another AH. ● In order to operate VB-C60 using IPsec, you need to set communication destinations Note and the network in advance. For more information on these
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 56
    Server 11122 11222 1122 3 1122 114522 1 LAN Settings required for LAN connection such as IP address (➞ P.1-8) 2 IPv6 Settings for IPv6 use (➞ P.1-9) 3 Installation Conditions Settings for camera's installation conditions (➞ P.1-17) 4 MPEG-4 Settings for video size and frame rate in MPEG-4 (➞ P.1-19
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 57
    is displayed. When reconnecting to the camera, use the displayed URI. If you cannot connect to the camera using the displayed URI, contact your administrator. * The settings in "Reboot Item", which are related network settings, include "IP Address", "Subnet Mask", "Default Gateway Address" and "HTTP
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 58
    Settings Display a list of current settings. 3 Reboot Reboot the camera. 4 Restore Settings All settings will be restored to the factory default settings, except camera's administrator password, IP address, subnet mask, default gateway address, date and time, time zone, LAN interface, maximum
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 59
    Chapter VBAdmin Tools This chapter describes how to set up cameras using VBAdmin Tools. You can create panoramas, set a view restriction, presets and motion detection, view logs, and launch the Admin Viewer. You should configure detailed settings as described in Chapter 1 in advance.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 60
    Tool", "View Restriction Tool", "Preset Setting Tool", "Motion Detection Tool", "Log Viewer" and "Admin Viewer". You can easily configure the settings of VB-C60, view images with special privileges, check the operation status and retrieve logs from a remote location via networks. VBAdmin Tools
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 61
    presets to monitor. Overview of VBAdmin Tools Motion Detection Tool (→ P.2-27) This tool is to set up motion detection function camera. Log Viewer (→ P.2-36) This viewer enables viewing of operation status logs output to VB-C60. Admin Viewer (→ P.3-5) This viewer is for the administrator of VB-C60
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 62
    VBAdmin Tools, it should first be connected to VB-C60. Enter connection settings and click "OK". 1 2 3 4 5 6 7 1 Host name (→ P.1-8) Specify IP address or host name of VB-C60. 2 User name Enter default Administrator account "root" for VB-C60. 3 Password (→ P.1-7) Enter Administrator password. (The
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 63
    Explorer. ● Panorama Creation Tool, View Restriction Tool, Preset Setting Tool and Motion Tip Detection Tool cannot be launched simultaneously. Log Viewer and Admin Viewer can be launched simultaneously. ● When connecting to another Canon network camera other than VB-C60, you may not be
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 64
    see, at a glance, which part of the entire viewing area is currently covered. Panorama Creation Tool is used to take and create panorama image and register them in VB-C60. Admin Viewer Preset Setting Tool You can see, at a glance, where the region currently being set is located within the entire
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 65
    Panorama Image button Displays panorama image registered in VB-C60. 2 Register Panorama Image button Register panorama image currently displayed in panorama creation tool. 3 Display Camera model and Capture Date Displays the model of camera currently connected and the date when the panorama
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 66
    Panorama Creation Tool Capture Panorama Image How To Capture 1. Click "Capture" to start capturing Change the AE lock position as required. Check the Indoor dome housing (VB-RD51S) option if you are using the optional indoor dome housing. To stop capturing while it is in progress, click "Stop". 2.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 67
    " The panorama image registered in VB-C60 is deleted. After registering the panorama image, VB-C60 automatically reboots and disconnects Tip from the VB Admin Tools. A dialog box asking whether or not to reconnect to VB-C60 appears after VB-C60 restarts. Click "OK" to reconnect to the camera. 2-9
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 68
    Panorama Creation Tool Reconnect Reconnections when a connection with VB-C60 has been cut. How To Reconnect Select "Reconnect" from the File menu bar Open/Save Panorama Image from/to Image File You can open an
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 69
    camera can capture. Once you set the view restriction, you can limit the area, within which VB-C60 viewer can display. View Restriction Tool lets you easily set view restrictions in cases where you want to set restrictions on zoom or a portion of the field of view when videos are distributed live
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 70
    7 0 9 8 1 Load View Restriction button Loads the view restriction values currently set in VB-C60. 2 Save View Restriction button Saves the view restriction values set and applied using this Tool to VB-C60. After setting the view restriction, be sure to click "Save View Restriction" to save the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 71
    value of the selected camera angle is obtained using Admin Viewer button Starts the Admin Viewer. 0 Status List Displays the results of operation of this tool. Warning messages are displayed in blue and error messages are displayed in red. Clicking "Apply" does not save the edited values to VB-C60
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 72
    Tool Set View Restrictions You can change the view restriction values by entering numeric values in the View Restriction Value Input boxes or using the camera angles from the View Restriction Preview Frame or Admin the Status List and click "Save View Restriction" to save the values to VB-C60. 2-14
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 73
    Admin Viewer" to launch Admin Viewer If accessing to Admin Viewer, you should make user authentication (→ P.xiii) 3. Click "Obtain/release Camera Control" in Admin Viewer to obtain the camera control rights VBAdmin Tools Obtain/release Camera Control button 4. Change camera values to VB-C60. 2-15
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 74
    View Restriction Tool ● When changing settings for camera's installation conditions, you need to recapture Note a panorama image and register again. ● Panorama Preview may be slightly different from the actual picture. You need to check if the view restrictions are correctly reflected in VB Viewer
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 75
    Tools View Restriction Tool ● The pan and tile area depending on the zoom rate (viewing angle). When the view restriction is set, the camera operation angle is automatically restricted. When a wide-angle is used without changing the camera the view restriction, the camera direction (pan/tilt) is
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 76
    Preset Setting Tool This tool enables you to easily set presets and home positions visually. They can be set by " settings, which tours through multiple presets to monitor. After setting presets, set Preset Tour Preset Setting Tool Reflecting to VB-C60 Viewer Performing Preset Tour 2-18
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 77
    Setting Area (→ P.2-24) !3 1 Load Preset Settings button !2 !1 0 Loads preset settings currently set in VB-C60. 2 Save Preset Settings button Saves preset settings which is set and applied with this Tool to VB-C60. After setting the presets, be sure to click "Save Preset Settings" to save the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 78
    watching the actual video image via Admin Viewer. Set the camera toward the position with which the preset is set, click "Get value" and then click "Apply" to set the preset. !3 Status List Displays the results of communications between this tool and VB-C60. Warning messages are displayed in blue
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 79
    Tools Preset Setting Tool Clicking "Apply" does not save the edited settings to VB-C60. After editing the settings, Note be sure to click "Save Preset Settings" to save the settings to VB-C60 the setting position by editing the values in the camera parameters. 3. Click "Apply" Check the Status List
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 80
    and enter the preset name 2. Click "Admin Viewer" to launch the Admin Viewer If accessing to Admin Viewer, you should make user authentication (→ P.xiii) 3. Click "Obtain/release Camera Control" in Admin Viewer to obtain the camera control 4. Operate the camera at a desired position and then click
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 81
    via the Admin Viewer. After manual focusing completes, click "Get value" to set the preset. ● When changing the Image Stabilizer setting, after setting the preset. ● When using a dome housing, set the preset while the dome is installed. ● When changing settings for camera's installation conditions
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 82
    Preset Setting Tool Preset Tour You can set "Preset Tour" to monitor multiple presets that have already the selected preset in the Preset Preview frame. The camera angle of VB-C60 is also switched based on this preset, which can be confirmed in the Admin Viewer. 6 Auto preset tour Select an option
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 83
    save the setting data without changing it. (When using the Preset Setting Tool, click "Save" in the setting page.) The standard durability of the 28,333 hours. ● Preset Tour is not performed when the camera is controlled with VB-C60 Viewer or another viewer. Tip ● Preset Tour does not work
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 84
    Preset Setting Tool ■ Set Preset Tour To Make Settings... camera angle is switched based on this preset, which can be confirmed in the Admin viewer. 4. Click "Apply" Check the Status List to make sure that the values are applied correctly and click "Save Preset Settings" to save the values to VB-C60
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 85
    detection with viewing the video from the camera. Setting Motion Detection easily using Motion Detection Setting tool The levels of motion detection determine how is required, such as for monitoring purposes. Canon accepts no liability whatsoever for faults, etc. resulting from the use of
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 86
    current motion detection settings edited with this tool. After setting the motion detection, be sure to use "Save Motion Detection" to save the setting values to VB-C60. 3 Live Mode tab (Live/Recorded Video) ● Live Displays the video image and controls the camera. You can also record the displayed
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 87
    black and white in the viewer of Motion Detection Tip Setting Tool, regardless of settings of the camera. ● In the "Area" tab, you can set the , you can set the conditions of judgment with viewing video recorded in "Live" tab (→ P.2-35). ● Motion Detection function • When setting for motion
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 88
    position can be set to a desired position 2 using the viewer for live video, or you can select a preset in the "Camera" tab. You need to set the preset settings using Preset Setting Tool in advance (→ P.2-21). 1Enable frame rate setting Check the checkbox, so that you can set the frame rate
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 89
    Tools Motion Detection Setting Tool each area separately. With VB-C60, you can adjust the motion detection sensitivity with viewing video, recorded in the "Live" tab (→P.2-35). 1 to automatically set the sensitivity for motion detection. The camera detects motion when changes in the subjects in the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 90
    Tool 7Duration When changes in the video image in the detection area meet the conditions set in 3 "Sensitivity" and 6 "Size" and continue for the value set in "Duration", the status of the VB-C60 detection status of the camera Check "Display motion detection status of the camera" to confirm the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 91
    "Display motion detection status of Tip the camera" displays in this tool, and the actual detection status of the VB-C60 may not match perfectly. ● When the Motion Detection function of the VB-C60 is enabled, the processing load on the VB-C60 becomes high, and therefore the video distribution
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 92
    Motion Detection Setting Tool "Detected" Status and Display Screen Tip A frame of areas in the video meets the conditions set in both "Size" and "Duration" and the status of the camera becomes "Detected", a red peak block appears. You need to set the detection sensitivity with checking the level
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 93
    on which the status of the VB-C60 becomes "Detected". In the VB-C60, you can set the motion detection sensitivity with viewing the video recorded in the "Live" tab (→ P.2-28), so you do not need to repeatedly make motions in front of the camera. 1. Select "Tools" → "Video recording options" from the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 94
    status logs of the camera. ● Log Viewer only displays a log. You cannot delete the log. Tip ● To save the log, select "File" → "Save" from the menu bar. The log is saved as a text file. Download Log File How To Download When starting the Log Viewer from VB Admin Tools, the latest log file
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 95
    with each log code, depending on the log level. Logs without a log code are displayed without an icon. Information level Error level VBAdmin Tools Warning level ● Date & Time The date and time when the log was generated is displayed. ● Message The log messages are displayed. ■ Save Logs
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 96
    How To Display Select "View" → "Show all logs" from the menu bar All event logs are displayed, like "View Log Events" (→ P.1-44) in "Maintenance" in camera's setting page. ■ Select and View Logs by condition Logs can be filtered according to log type, code, or date and time so that only the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 97
    VBAdmin Tools Log Viewer Date & Time ● Specify start date & time When this item is selected and a date and time is entered, logs generated after the specified start
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 98
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 99
    Chapter VB-C60 Viewer This chapter describes how to use the VB-C60 viewer with which you can access a camera via a Web browser to view live videos, control the pan, tilt and zoom, exposure mode, night mode, white balance, focus, smart shade control, and other functions.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 100
    VB-C60 Viewer Overview The VB-C60 viewer is a viewer used to access network camera VB-C60 via a Web browser and to control the camera, including image display and pan/tilt/zoom controls. The VB-C60 viewer includes 2 viewers: Admin viewer and VB viewer. Admin Viewer VB-C60 Viewer VB Viewer Use
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 101
    required to control the camera using the VB viewer. The "Audio Distribution" privilege is required to receive audio using the Admin viewer or VB viewer. Administrator Users with all privileges. The user name is fixed to "root". The Admin viewer can be started from the "Admin Viewer" link on the top
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 102
    VB-C60 Viewer Overview ● While an Administrator is connecting to a camera, other Administrators cannot connect to the same camera. On the other hand, multiple Admin viewers started by "Authorized users" can connect to one camera at the same time. In that case, the camera control privilege is always
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 103
    up the camera. Enter the IP address that is actually set for your VB-C60. How To Start 1. Access "http://192.168.100.1/" using a Web browser 2. Click "Admin Viewer" or "VB Viewer", according to the user type 3. To open "Admin Viewer", enter the user name and password The factory default setting is
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 104
    2. Click "Admin Viewer" 3. Enter the user name and password The factory default setting is as follows (➞ P.xiii). User name : root Password : VB-C60 The user name "root" is VB-C60's Administrator account. * The default password is "VB-C60". Be sure to change the password in the "Network" menu in
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 105
    4. The Admin viewer starts in a Web browser Starting VB-C60 Viewer Be sure to enter the correct user name and password. If entering a wrong one, try Note again with the correct name and password. VB-C60 Viewer 3-7
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 106
    Operate the VB-C60 Viewer "Admin Viewer" Display Screen This section describes the overview of the Admin viewer, the size for receiving video from the camera. 2 Video Display Size Select the size for displaying video. 3 Full Screen Mode button Click to view live video in the full screen mode.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 107
    the VB-C60 Viewer 0 Backlight Compensation button Click to switch on the backlight compensation. It works effectively to compensate for areas that are darkened due to backlight. Click again to switch off the function. !1 Control Privilege Status Indicator Whether or not the client has the camera
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 108
    Resume button Click to pause the video display. Click again to resume the live video display. 4 Reconnect button Click to connect to the camera again. 5 Audio Reception button Click to receive and output audio from the camera. 6 Zoom Controller Click on the bar to control the zoom magnification
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 109
    compensation and presets. How To Operate Click "Obtain/Release Camera Control" to obtain the camera control privilege Admin Viewer VB Viewer VB-C60 Viewer Control Privilege Status Indicator The status of the camera control privilege is displayed. "Obtain/Release Control Privilege" button
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 110
    How to Operate the VB-C60 Viewer Control the Camera ■ Change the Camera Angle How To Control Admin Viewer You can change the camera angle in one of the following ways. Slide the knob on the scroll bar for pan or tilt The camera angle changes according to the knob position on the scroll bar. You
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 111
    , by clicking on an image of the Tip VB-C60 viewer. ● The Administrator can control the camera beyond the view restriction area with the Admin viewer. However, with the Admin viewer started by Authorized users, the users can control the camera within the view restriction area only. ● With the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 112
    How to Operate the VB-C60 Viewer ■ Change the Camera's Zoom Magnification How To Change Admin Viewer Slide up or down the knob on the scroll bar for zoom The camera zoom magnification changes according to the knob position on the scroll bar. You can also move the knob by clicking on a blank area
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 113
    How to Operate the VB-C60 Viewer ■ Change the Zoom Magnification in the Panorama Display Area Change by dragging Drag the is drawn. Tip When you release the mouse, the blue frame changes to yellow and the camera's pan, tilt, and zoom change and move to capture the new yellow-framed area. 3-15
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 114
    to Operate the VB-C60 Viewer ■ Use a Preset You can control the camera using presets registered in the camera in advance (➞ P.2-18). How To Operate 1. Display the preset dropdown list by clicking the Preset Selection box 2. Select a preset from the list to change the camera angle Preset Selection
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 115
    You can change the video capture size and the video display size, switch to the full screen mode, pause/resume video, reconnect to the camera and start/stop receiving audio. Admin Viewer VB Viewer VB-C60 Viewer ■ Change the Video Capture Size You can select the size for receiving video from the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 116
    How to Operate the VB-C60 Viewer ■ Full Screen Mode (only in the Admin viewer) You can display the video at full-screen size. Click the button to launch a new window at full screen size. Click the close button
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 117
    the camera. How to Operate the VB-C60 Viewer Click the button to reconnect to the camera After reconnecting to the camera, audio reception is stopped. In addition, the camera Tip control privilege is lost, and the video capture size and the video display size are restored to the default settings
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 118
    How to Operate the VB-C60 Viewer Display Information Information and warning messages are displayed. ¡ Information Message The icon is displayed in blue. This type of messages is displayed when the camera is operated properly. It displays help messages for buttons and pull-down menus, pan/tilt/zoom
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 119
    VB-C60 Viewer Operation and Setting as Administrator This section describes operations and settings, which are available only in the Admin viewer. Open the Control for Admin Panel How To Operate 1. Click "Obtain/Release Camera Control" to obtain the camera control privilege 2. Click "Control for
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 120
    of the motion detection function is indicated. Example Area 1 - 3 : Detection OFF Area 4 : Detection ON You need to set for Motion detection with "Motion Detection Setting Tool" (➞ P.2-27) Tip in VBAdmin Tools, in advance. 3-22
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 121
    VB-C60 Viewer Operation and Setting as Administrator Control and Set the Camera You can control the camera and change the speed using the Camera Control buttons. 11122 11222 11322 11422 1 Pan/Tilt button You can pan and tilt the camera in the direction of arrows. Hold down the button to keep moving
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 122
    viewer, it is not reflected to Note the Focus Mode in camera's setting page. ● Note that the focus will be fixed if you select the manual focus mode. ● Once the setting is changed in the VB-C60 viewer, the setting is applied to other users' viewers as well. ● If you specify the shutter speed within
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 123
    the settings related to exposure operations. 11122 11222 11322 11422 VB-C60 Viewer 1 Exposure Mode Select from "Auto", "Manual", "Auto (Flickerless)" or "Auto (Shutter Speed)". When using the camera while setting "Day/Night" to "Auto" in the "Camera" menu in the setting page (➞ P.1-16), use "Auto
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 124
    When "Auto (Shutter Speed)" is set, select between "1/8 sec" and "1/8000 sec" from the pull- down menu. 5 Aperture When the Exposure Mode is set to "Manual", 11522 11622 set the aperture value. The further to the left you move the slider, the more closed the aperture and the darker the image
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 125
    and Setting as Administrator VB-C60 Viewer Set the the camera in daylight fluorescent lighting. White Fluorescent : Select when using the camera in in an environment where the light source gradually changes (e.g. continuous outdoor shooting for day and night), the image may show an incorrect
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 126
    Night Mode Switch between "Day Mode" and "Night Mode". The Night Mode cannot be used when Tip "Day/Night" is set to "Auto" in the "Camera" menu on the setting page (➞ P.1-16). Day Mode: You can view color video in the normal mode. Night Mode: The infrared cut filter is removed
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 127
    Chapter Creating Web Pages for Video Distribution This chapter describes how to use the VB-C60 to webcast information. Image data can be distributed in various ways, including displaying video or still images and displaying multiple images on a Web page.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 128
    Web server HTTP (WWW) server 2 Notify Internet IP1adAdrcecsessisnfotormWaetiobnpages VB-C60 3 Request for video 4 Distribute video Viewer PC If you select a link requesting video in step 1, a file that includes the IP address information for the VB-C60 is sent from the Web server in step
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 129
    top pages as Index-fr.html and the English-language top page as Index.html and supply users with a URL address terminates in slash, such as http://192.168.100.1/sample/, the server Help. * The underlined portion is a sample IP address. Enter the actual IP address set for the VB-C60 (→ P.1-8). 4-3
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 130
    100.1/sample/ * The underlined portion is a sample IP address. Enter the actual IP address set for the VB-C60 (→ P.1-8). * The page can be displayed from " camera. Sample for mobile phones This is a sample page, which displays live videos. This is a still image display sample page with the camera
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 131
    . * The underlined portion is a sample IP address. Enter the actual IP address set for the VB-C60 (→ P.1-8). You can also specify the URL without the IP address as shown below when you save the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 132
    VB-C60 is equipped with a Flash memory where Web page data can be saved. Data is saved by transferring the data files using FTP. The data is placed as a file under /usr/www/html/local. Device On-board flash memory File system (accessed by an ftp client) ftp://IP data in the camera's flash memory.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 133
    LiveApplet * The underlined portion is a sample IP address. Enter the actual IP address set for the VB-C60 (→ P.1-8). You can also specify the URL without the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 134
    .html" src No You can also specify the URL without the IP address as shown below for the Web page saved in the flash memory in the VB-C60. Japanese version: src="/viewer/live/ja/live.html" English version: src="/viewer/live/en/live.html" *When you wish to hide the scroll bar, also specify the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 135
    use the WebView-HTTP protocol to distribute video from VB-C60. Some examples are described in this section. Display the Live Video at Access as a Still Image When a wvhttp-01-/GetOneShot> * The underlined portion is a sample IP address. Enter the actual IP address set for the VB-C60 (→ P.1-8). 4-9
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 136
    VB-C60 is being used to distribute live videos on the Internet. An Internet service provider (ISP) that offers a single-address fixed global address service for VB-C60 (and 192.168.100.1 for the router). VB-C60 192.168.100.2 Router 192.168.100.1 Internet Viewer PC Web server Add support for
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 137
    images and control the camera using the Web service of a mobile phone. You can easily create still image distribution pages for mobile phones with HTML, which uses the command image.cgi. Sample pages for still image distribution for mobile phones have been provided for the VB-C60. See below for how
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 138
    overwriting the sample files in the flash memory in VB-C60, be sure to create Note a backup of them. ■ image.cgi Parameters Command pan Description Specifies the pan of the camera in units of 0.01. When a positive value is specified, the camera is panned toward the right. When a negative value is
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 139
    Creating Web Pages for Video Distribution Distribute Still ImaÍges to a Mobile Phone For pan, tilt and zoom, you can specify the relative position from the current position Tip using "d", which indicates the current position. Example: Panning 10 degrees to the right from the current position ⇒ pan
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 140
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 141
    Chapter Appendix
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 142
    name (alphanumeric characters)" %P Pan position -179.99 ~ 180.00 %T Tilt position -179.99 ~ 180.00 %Z Zoom position 0.1 ~ 300.00 %V Camera server VB-C60 %y Year of shot 2001 ~ 2031 %m Month of shot 1 ~ 12 %d Day of shot 1 ~ 31 %w Weekday of shot 0 ~ 6 (corresponds to Sun. to Sat
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 143
    Appendix 5-3
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 144
    ● Check that the VB initial setup tool for older models is not used. Camera's top page does not appear ● Check that the LAN cable is connected properly. ● Check that the network for the camera is set properly. In particular, check that the IP address, subnet mask, and default gateway address setting
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 145
    Reboot the PC and reconnect to the camera. Have forggotten the password ● You can initialize all the settings by using the reset switch (➞ P.5-15). The factory default password is "VB-C60." However, all settings including network settings, such as the IP address and subnet mask are also initialized
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 146
    > not found Access was made by an unauthorized user. ●A102 Invalid password Message Explanation user password mismatch The password is invalid. ●A111 Invalid host Message Explanation host access denied Access was made by a prohibited host. ●A160 Pan/tilt sub system
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 147
    inverted installation, universal head initialization, dome). If this is not resolved after a reboot, it is a camera failure. ●A260 Pan/tilt problem persists, it is a camera failure. ●A350 Camera control system Message Explanation Countermeasure camera status timeout - resetting (A350) The camera
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 148
    Log Message List ■ Application Messages (Uploader) ●A004 Uploader start and stop [info] Message %1 Explanation %1 uploader (A004) Start (starting) or stop (stopping) The uploader has started or stopped. ●A120 Upload destination name resolution failed [notice] Message Explanation uploader
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 149
    failed. If this is not resolved after a reboot, it is a camera failure. ■ Application Messages (Audio Server) ●B001 Audio server start %3 Explanation [%1] %2 connected n=%3 Client type (send | recv) Client host IP address Total number of clients An audio client has been connected to the Audio
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 150
    unsupported stream (46), restriction on the number of clients (49), operation mode (4a). 41: Check the user name, password, or user list. 43: Reconnect or reboot the camera. 45-46: Use supported client software. 49: Check the setting of the number of clients. 4a: Check that use of the Audio Server
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 151
    [info] Message Explanation (vbadmin.c.XXX) System settings updated (S005) The settings have been changed without a reboot. ●S240 Camera error [warning] Message Explanation serviceman call (S240) The camera may have an error. Ask for service. ●S306 Error in saving setting values [err] Message
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 152
    VB-C60 Information message from the camera, frame rate information, bit rate information, etc. Warning message messages to alert users, for example, when camera. Reconnect button Starts/Stops receiving audio. Audio Reception button Displays camera controls for administrators. Control for Admin
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 153
    VB-C60 Viewer Message List ■ Warning Messages Message Your web browser is not supported. Description Unsupported browser is being used. ■ Error Messages Message No response from the camera. The camera is not available because of too many users. Failed to get camera control privilege.
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 154
    For information on the factory default settings, refer to P.5-16. Restore the Factory Default Settings from the Maintenance Menu Using a Web Browser 1. Start a Web browser and access the camera's setting page The camera's IP address, user name and administration password are required to display the
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 155
    the Factory Default Settings Initialize the Camera using the Reset Switch If you have forgotten the IP address or Administrator password of VB-C60, you cannot control the camera via the network. In this case, press the reset switch on the rear of the camera. 1. Power off the camera For information
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 156
    Setting Item Setting 1 (year/month/day) ● User name (Administrator ID) root ● Administrator password VB-C60 ● Setting page path admin ● LAN IP Address Setting Manual IP Address 192.168.100.1 Subnet Mask 255.255.255.0 Default Gateway Address LAN Interface Auto Maximum Transmission
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 157
    Server Port 25 Sender (From) Recipient (To) Authentication None User Name Password POP Server Subject Message ● Image Server Maximum Number of Clients 30 Camera Control Queue Length 30 Maximum Connection Time (sec.) 0 Camera Control Time (sec.) 20 ● Audio Server Audio Transmission
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 158
    List of Factory Default Settings Item ● External Device Input External Device User Account Authorized User Account Password User List Setting ● Authorized User Account Authorized User Account Password User List ● User Authority Authorized user Privileged Camera Control Checked Camera
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 159
    HMAC_SHA1_96 Disable Tunnel Mode ESP 0 AES HMAC_SHA1_96 HMAC_SHA1_96 Disable Tunnel Mode ESP 0 AES HMAC_SHA1_96 HMAC_SHA1_96 Disable Tunnel Mode ESP 0 AES HMAC_SHA1_96 HMAC_SHA1_96 List of Factory Default Settings Item Setting 1 (year/month/day) Item Setting 2 (year/month/day) 5-19 Appendix
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 160
    Index A Access Control 1-35 Admin Tool 2-2 Admin Viewer 3-8 Audio Transmission from the Camera 3-19 Control for Admin Panel 3-21 Administrator 3-3 Administrator Password 1-7 AE Mode 1-14 Audio 1-27 Audio Distribution 1-36 Audio Reception 3-8, 3-10 Audio Transmission 1-27 Input Volume
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 161
    Mask 1-8 T Tilt 2-17, 2-20 Time 1-11 Time Zone 1-12 Troubleshooting 5-4 U Upload 1-21 User Account 1-35 User Authority 1-35, 3-3 User List 1-35 User Name 1-22 V VB Viewer 3-10 VBAdmin Tools 2-2 VB-C60 Viewer 3-2 View Restriction 2-11 Voice Activity Detection 1-27 W White Balance
  • Canon Vb-C60 | NETWORK CAMERA VB-C60 Operation Guide - Page 162
    . MONTRÉAL 8801 Trans Canada Hwy, St. Laurent Québec H4S 1Z6 ● If you have any questions, call the CANON CANADA Customer Information Centre tollfree at 1-800-OK-CANON (652-2666) (Canada only) CANON MEXICANA, S. DE R.L.DE C.V. Boulevard Manuel Avila Camacho, No. 138 PB, Pisos 15, 16 y 17 Col Lomas de
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
Before using the product, be sure to read the Start Guide and this Operation Guide.
NETWORK CAMERA
Operation Guide