Canon imageCLASS MF5730 imageCLASS MF5750 Set-Up Instructions

Canon imageCLASS MF5730 Manual

Canon imageCLASS MF5730 manual content summary:

  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 1
    Set-Up Instructions Thank you for purchasing Canon imageCLASS MF5750. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components. Check that you have the following: ● Cartridge ● Cassette
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 2
    5 Hold the cartridge so that the instructions (A) and the arrow (B) are facing up, and insert it in the machine horizontally as far as it will go. 6 Close the front cover of the machine. Assemble the cassette and load paper. B A 1 Hold the document feeder (A) with one hand, and open the document
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 3
    ° angle. Once inserted, fold the extension as shown ➋. 4 Pinch and slide the rear paper end guide to match the size of paper. NOTE ● Confirm that the paper guide is fitted in the paper size slit correctly. To load Legal-size paper: Pull the blue tab ➊ and extend the cassette ➋ as far as it will go
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 4
    the machine, paper jams may occur. IMPORTANT ● Do not push in the cassette at an angle. Doing so may damage the paper sensing lever inside paper feeding assembly inside the machine. Connect the telephone cable and any necessary external device. Connect the telephone cable to the wall jack. Connect
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 5
    connect the other end to the wall outlet ➋. 2 Once it is warmed up, the standby display appears in the LCD. IMPORTANT ● For important safety instructions on installation and handling of the machine, see "Important Safety Instructions" in the Basic Guide. NOTE ● Make sure the correct paper size
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 6
    you selected [Network Connection] by mistake, go back to the previous screen by clicking [Back], and select [USB Connection]. NOTE ● The instructions below are for Windows XP/Server 2003. For Windows 98/Me/2000, see the Software Guide (included in the User Software CD). ● For Windows 2000/XP/Server
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 7
    is complete, click [Exit] to close the MF Drivers-Setup Wizard screen. 9 On the MF Setup screen, click [Install MF Toolbox]. 10 When the MF Toolbox-Setup Wizard screen appears, click [Next] and follow the instructions on the screen. NOTE ● Before installing MF Toolbox, make sure that all other
  • Canon imageCLASS MF5730 | imageCLASS MF5750 Set-Up Instructions - Page 8
    to ensure product support. The serial number is located on the back of the machine. For installation help and operational instructions, call us at: 1-800-828-4040 1-800 OK CANON U.S.A. CUSTOMERS CANADA CUSTOMERS Part no. FA7-6518 (010) ©2005 Canon Inc. Canon and imageCLASS are trademarks of
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Set-Up Instructions
Set-Up Instructions
Thank you for purchasing Canon imageCLASS MF5750.
To get your machine ready for use,please follow the instructions in this document before referring to any other documentation.
Unpack the machine and its components.
Check that you have the following:
Machine
Cartridge
NOTE
The cartridge included with the machine is Cartridge X25 that yields approximately 2,500 pages of printouts (Letter at 4%
dot coverage).
Before setting up the machine:
1
Place the machine on a flat, stable surface.
2
Remove
all
shipping tape from the
exterior
of the machine.
Referring to the following figure, remove the tape and spacers on both sides of the
cassette housed in the machine.
Cassette extension
Extension cover
Power cord
USB cable
Telephone line cord
Destination labels
Set-Up Instructions
Basic Guide
Facsimile Guide
Warranty
Limited Warranty Note for Cartridge X25
Registration Card
MF5700 Series User Software CD-ROM