Canon imageFORMULA P-150M Reference Guide

Canon imageFORMULA P-150M Manual

Get Canon imageFORMULA P-150M PDF manuals and user guides View all Canon imageFORMULA P-150M manuals
Add to My Manuals
Save this manual to your list of manuals

Canon imageFORMULA P-150M manual content summary:

  • Canon imageFORMULA P-150M | Reference Guide - Page 1
    Reference Guide • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
  • Canon imageFORMULA P-150M | Reference Guide - Page 2
    NOT OPEN THE SEALED DISK PACKAGE AND PROMPTLY RETURN THE CANON SCANNER, THE DISK PACKAGE CONTAINING SCANNER DRIVER SOFTWARE PROGRAMS AND/OR SCANNER UTILITY SOFTWARE PROGRAM PROPRIETARY TO CANON OR ITS LICENSOR (THE "SOFTWARE") AND THE ACCOMPANYING DOCUMENTATION AND OTHER ITEMS TO THE PLACE WHERE YOU
  • Canon imageFORMULA P-150M | Reference Guide - Page 3
    Documents 14 After Scanning 15 Scanning with CaptureOnTouch 16 Installing CaptureOnTouch 16 Connecting the Scanner to the Computer 16 Scanning with the Scanner Button 17 Starting CaptureOnTouch Before Scanning 18 Common Problems and Solutions 19 Replacing Parts 21 Replacing the Feed Roller
  • Canon imageFORMULA P-150M | Reference Guide - Page 4
    approximately 2.2 lb (1.0 kg). ● Make sure to disconnect any USB cables and AC adapters (not supplied) when moving the scanner. If the scanner is carried with these items connected, the plugs and connectors may be damaged or cause the scanner to fall and result in personal injury or damage to the
  • Canon imageFORMULA P-150M | Reference Guide - Page 5
    using an AC adapter (not supplied) to power the unit, make sure to read the operating manual for the AC adapter. ● Use only recommended AC adapters. In addition, do not use these AC adapters with devices other than the scanner. ● Using the AC adapter, you can obtain better scanning speed than when
  • Canon imageFORMULA P-150M | Reference Guide - Page 6
    using it. This may result in personal injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power to stop the scanner. ■ Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand
  • Canon imageFORMULA P-150M | Reference Guide - Page 7
    Checking the Accessories Supplied Accessories • USB Cable • Reference Guide (This Document) • Software Setup Disc (DVD-ROM) • Power Supply USB Cable • Separation Pad • Supplied accessories are subject to change without notice. • Keep the scanner's packaging and packing materials for storing and
  • Canon imageFORMULA P-150M | Reference Guide - Page 8
    Attaching the Separation Pad Use the following procedure to attach the supplied separation pad before using the scanner. A Open the feed tray. C Attach the separation pad. B Open the feeder cover. Removing the Separation Pad The separation pad is a consumable part. When replacing the separation
  • Canon imageFORMULA P-150M | Reference Guide - Page 9
    allows you to scan using power from the computer's bus. When using the AC adapter (sold separately) Using the AC adapter, you can obtain better scanning speed than when using the USB cable by itself. To power outlet When not using the scanner Close the scanner's Document Feed Tray or disconnect
  • Canon imageFORMULA P-150M | Reference Guide - Page 10
    " on p. 11) By installing the scanner driver stored on the software setup disc, you can use applications such as the supplied CaptureOnTouch. (See "Scanning with CaptureOnTouch" on p. 16) Hint Software installation is not necessary for using the internal scanner software, CaptureOnTouch Lite. 10
  • Canon imageFORMULA P-150M | Reference Guide - Page 11
    blink slowly when the USB cable is connected and the feed tray is opened. When this occurs, wait for the power indicator to stop blinking and light steadily before using the scanner. • When scanning with CaptureOnTouch Lite, do not close the feed tray until you have finished saving image files. 11
  • Canon imageFORMULA P-150M | Reference Guide - Page 12
    auto play screen. In this case, click [Open folder to view files] and double-click (ONTOUCH.exe). 4. Placing Documents Fan the pages before placing them. Place the scanning side of the documents face down into the scanner. LTRA4 B5 A5 A5 B5 A4 LTR Adjust the document guides to the edges of the
  • Canon imageFORMULA P-150M | Reference Guide - Page 13
    (binary)). If you select [Auto Color Detection], the scanner automatically detects whether a document is in color or black-andwhite. B Specify the page size of the document. C Specify the scanning resolution. D Specify whether to scan one side of a document or both sides. If you select [Skip blank
  • Canon imageFORMULA P-150M | Reference Guide - Page 14
    [Start] or press the start button on the scanner. • If double-feeding occurs, reduce the number of pages that you load into the scanner at one time. • Depending on paper quality, you may hear unusual noises while scanning some documents, but this does not indicate a malfunction. B Configure the
  • Canon imageFORMULA P-150M | Reference Guide - Page 15
    After Scanning A Click [X] to close CaptureOnTouch Lite. B Close the feed tray. LTRA4 B5 A5 A5 B5 A4 LTR C Disconnect the USB cable. Using Windows 2000 Before closing the feed tray, double-click in the taskbar, click [USB Mass Storage Device], and then click [Stop]. 15
  • Canon imageFORMULA P-150M | Reference Guide - Page 16
    switch on the scanner to OFF. C Connect the scanner to the computer using the supplied USB cable. (Connect the power supply USB cable, if higher speed scanning is necessary.) Auto Start OFF ON Set to OFF. ▼ Click [Typical Installation] in the setup menu, and follow the instructions on the screen
  • Canon imageFORMULA P-150M | Reference Guide - Page 17
    Scanning with the Scanner Button A Place the scanning side of the documents face down into the scanner, and press the start button on the scanner. LTRA4 B5 A5 A5 B5 A4 LTR B Select the output method when scanning is finished. CaptureOnTouch starts automatically, and scanning begins. C After
  • Canon imageFORMULA P-150M | Reference Guide - Page 18
    you select a job, and then click [Start]. Scanned images are output automatically after scanning is finished. For details on operating CaptureOnTouch, refer to the User Manual or the CaptureOnTouch Help. Documents placed in the scanner are scanned when you click [Start]. Select an output method
  • Canon imageFORMULA P-150M | Reference Guide - Page 19
    in application, CaptureOnTouch Lite. In this case, scanning from applications on the computer is disabled. (6) If "?", "!", or "x" icons appear for the scanner in Windows Device Manager, delete the scanner in Device Manager and reinstall the scanner driver. CaptureOnTouch Lite does not start. (1) If
  • Canon imageFORMULA P-150M | Reference Guide - Page 20
    Solutions Problem 6 Solutions Problem 7 Solutions Documents fed askew are causing scanned images to be slanted. (1) Align the document guides to fit the documents as closely as possible, and place the documents so that they feed in straight. (2) Enable [Deskew] in the settings of the scanner driver
  • Canon imageFORMULA P-150M | Reference Guide - Page 21
    Replacing Parts The feed roller and separation pad inside the scanner wear with scanning. If the feed roller and separation pad are worn, documents may not feed correctly and paper jams may occur. When document feed performance deteriorates, replace the feed roller and separation pad. Hint When the
  • Canon imageFORMULA P-150M | Reference Guide - Page 22
    right to fit it onto the pin on the left side of the feed roller, and then lower the lever to lock the roller into place. H Close the roller cover until it clicks into place. Make sure to press until you hear the cover click. Failure to securely close the cover will cause document feed problems. 22
  • Canon imageFORMULA P-150M | Reference Guide - Page 23
    I Close the feeder cover. B Open the feeder cover. Replacing the Separation Pad Use the following procedure to replace the separation pad. A Open the feed tray. PULL C Remove the separation pad. D Attach the new separation pad. 23
  • Canon imageFORMULA P-150M | Reference Guide - Page 24
    procedure whenever you replace the feed roller and separation pad. IMPORTANT If you only use CaptureOnTouch Lite and have not installed CaptureOnTouch and the scanner driver on your computer, you cannot reset the counter using the following procedure. In this case, you can reset the counter
  • Canon imageFORMULA P-150M | Reference Guide - Page 25
    G Click the [Maintenance] tab. H Click [Reset] for both [Current Rollers] and [Current Pad]. The counter for [Current Rollers] and [Current Pad] resets. I Click [OK] to close the scanner properties. 25
  • Canon imageFORMULA P-150M | Reference Guide - Page 26
    SINGAPORE PTE. LTD. 1 HARBOUR FRONT AVENUE #04-01, KEPPEL BAY TOWER, SINGAPORE 098632 CANON HONGKONG COMPANY LTD. 19TH FLOOR, THE METROPOLIS TOWER, 10 METROPOLIS DRIVE, HUNGHOM, KOWLOON, HONG KONG. CANON KOREA BUSINESS SOLUTIONS INC. 168-12 SAMSEONG-DONG, GANGNAM-GU, SEOUL, KOREA PUB. CE-IE-758
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
• Please read this manual before operating this scanner.
• After you finish reading this manual, store it in a safe
place for future reference.
Reference Guide