Canon imagePROGRAF PRO-6000S imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR
Canon imagePROGRAF PRO-6000S Manual
View all Canon imagePROGRAF PRO-6000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imagePROGRAF PRO-6000S manual content summary:
- Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 1
Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. • Instructions in this Setup Guide show the PRO-4000 printer. Note that your printer may look different from these illustrations in - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 2
, PRO-4000, and PRO-4000S, this is an option. Refer to the "Roll Unit Setup Guide" for details on the products included in the boxes. The Manuals Supplied with This Printer After installing the printer as shown in this Setup Guide, refer to the manuals for instructions on operation and maintenance - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 3
strain and other injuries due to the weight of the printer. - PRO-6000 : Approx. 268 lb (122 kg) - PRO-6000S : Approx. 260 lb (118 kg) - PRO-4000 : Approx. 231 lb (105 kg) - PRO-4000S : Approx. 227 lb (103 kg) - PRO-2000 : Approx. 185 lb (84 kg) • When moving the - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 4
supporting plate. A A • If you are not using a stand, place the printer in the installation Important location and proceed to "Turn On the Printer in the Printer Stand Setup Guide (separate manual). • Models That Do Not Use a Stand Proceed to "Turn On the Printer". Turn On the Printer 1 Open the - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 5
A 5 Plug the power cord into the power supply connector on the back of the printer. PRO-2000 PRO-4000 / PRO-4000S / PRO-6000 / PRO-6000S 6 Plug the power cord into the outlet. 7 Turn on the printer. 8 When the language selection screen appears on the touch screen, select and tap a language - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 6
the Ink Tanks Install the ink tanks. The PRO-2000, PRO-4000, and PRO-6000 use 12 ink tanks, and the PRO-4000S and PRO-6000S use 8 ink tanks. 1 Instructions on ink tank installation are shown on the screen. Open the ink tank covers as instructed. 2 Pull out the handle part (A) of the ink tank - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 7
then push it down. 8 Firmly push down the handle part of the ink tank lock lever all the way in. 9 Make sure the ink lamp lights red. 10 Repeat steps 2 to 9 to install each of the ink tanks. Close the ink tank covers. • If the ink lamp does not light, repeat Important steps 2, 3, 7, and 8. 7 - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 8
and open it. Do not touch the contacts (A) on the carriage. A Instructions are now shown on the screen regarding print head installation. 4 Remove the the Important handle or put down the unit. • The print head contains ink, so be careful not to spill it once the protective caps are removed. - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 9
ink tube stabilizer (C). Touching them may cause damage. B CA 3 Insert the paper for adjustment between the platen (A) and paper retainer (B) in portrait orientation with the printed side of the paper facing up. Only one sheet of paper is needed. B A When using the PRO-2000 without the printer - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 10
tanks to the print head. In addition, cleaning is performed to keep the printer in optimal condition. This may cause the remaining ink indicator and maintenance cartridge capacity indicator to drop some amount. The starter ink tank is for first-time installation. It is recommended that you purchase - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 11
to the print head. In addition, cleaning is performed to keep the printer in optimal condition. This Note may cause the remaining ink indicator and maintenance cartridge capacity indicator to drop some amount. The starter ink tank is for first-time installation. It is recommended that you purchase - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 12
with the operation. 4 Run the file you downloaded and click Start Setup. Configure the settings by following the instructions on the screen. • A screen for selecting the printer connection method may be displayed in the middle of configuring the settings. Note If this happens, select the method - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 13
. Wait until the above screen appears. Checking the nozzle. Filling the print head with ink... Cleaning... Configure the wireless LAN settings by following the instructions on the screen. • Before using the printer, the software Note needs to be installed on the computer that is connected to the - Canon imagePROGRAF PRO-6000S | imagePROGRAF PRO-6000 / PRO-6000S / PRO-4000 / PR - Page 14
wait a while, and then turn it on again. Error Ecxxx-xxxx (x represents a letter or number) Printer error has occurred. See the manual and contact the service center. Cause There is no ink tank loaded. The ink tank is not firmly installed all the way in. The print head is not installed. Electrical
1
QT6-2133-V01
PRINTED IN XXXXXXXX
XXXXXXXX
© CANON INC. 2017
47±²³´´9µ³
It is recommended that you reserve space of the following dimensions to allow you to work around the printer.
Check the completed image of the printer you purchased and make sure you have enough space to install the printer.
In order to ensure that this product is used safely, be sure to read the precautions.
-> Quick Guide (separate manual)
Before Setting Up the Printer
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
Set up the printer using the following procedure.
• Windows is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
PRO-2000
Installation space (W x D x H)
• When not using the stand
59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm)
• When using the stand
59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm)
PRO-4000 / PRO-4000S
Installation space (W x D x H)
78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)
PRO-6000 / PRO-6000S
Installation space (W x D x H)
94.5 x 66.3 x 61.5 inches (2399 x 1684 x 1560 mm)
Confirming the Installation Space
Overview of Setup
Important
• The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the
options are used.
• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the
position in the illustration.
Caution
• Instructions in this Setup Guide show the PRO-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic
operations are the same.
Note
• Some items are included with the printer but not described in
this manual.
Keep these items in a safe place after setup because they
are used in various printing applications.
• For instructions on the included items not described in this
manual, refer to the Online Manual. ("How to Display the
Online Manuals" on p.14)
• A cable to connect the printer to a computer is not provided
with the printer.
RMC (Regulatory Model Code): K10468
RMC (Regulatory Model Code): K10441
RMC (Regulatory Model Code): K10440
RMC (Regulatory Model Code): K10439
RMC (Regulatory Model Code): K10438
If an error message appears during setup or other problems occur,
refer to "Responding to Messages" on p.14.
Setup Guide
Introductory Information
ENGLISH
• Check this also after setup is complete.
3.9 inches
(100 mm)
(When not using
the stand)
3.9 inches (100 mm)
(When using the
stand)
23.6 inches
(600 mm)
(When using the stand)
(When not
using the stand)
5.9 inches (150 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
3.9 inches
(100 mm)
5.9 inches
(150 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
3.9 inches
(100 mm)
5.9 inches
(150 mm)
*
Assemble the Stand
(P.3)
* Refer to the separate
manual
Install the Printer
(P.3)
*
Attach the Roll Unit
(P.4)
* Refer to the separate
manual
*
Attach the Basket
(P.4)
* Refer to the separate
manual
Turn On the Printer
(P.4)
Install the Ink Tanks
(P.6)
Install the Print Head
(P.8)
Load the Paper
(P.9)
Store Accessories in the Pockets
(P.13)
How to Display the Online Manuals
(P.14)
•
Perform Print Head Adjustment
(P.10 ~ 12)
• Connect to the Printer