Canon imagePROGRAF iPF760 MFP Basic Guide
Canon imagePROGRAF iPF760 MFP Manual
 |
View all Canon imagePROGRAF iPF760 MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imagePROGRAF iPF760 MFP manual content summary:
- Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 1
Guide Manuals for this printer Setup Guide Basic Guide User's Guide Electronic manual Paper Reference Guide Electronic manual Read this manual before attempting to operate the printer. Keep this manual Adjusting the feed amount 78 Troubleshooting Problems Regarding Paper 81 Printing does not start - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 2
to use the printer safely. Do not perform any operations or procedures other than as described in this manual. Doing so may result in unexpected accidents and can cause a fire or electrical shocks. Printer location could cause the insulation material to deteriorate and lead to a fire. 2 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 3
the Warning printer off immediately and remove the power plug from the power outlet. Contact the nearest service center. Cleaning the Printer • For cleaning, use a cloth dampened in water. Never use flammable solvents . The contacts become extremely hot and can cause minor burns. 3 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 4
off, unplug the printer power cable from the outlet, and then call for service. If you continue to use the printer, this could cause a fire or if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there connected. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 5
15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. for personal or household use under limited circumstances. 5 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 6
's Guide Detailed instructions for using the printer. Paper Reference Guide This guide describes about the types and specifications of the available media on the printer. Medium Printed Manuals Electronic manuals Setup Guide Basic Guide User's Guide Paper Reference Guide Preface Manuals - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 7
the imagePROGRAF Support Information is displayed, click the User Manual icon or the Paper Reference Guide icon. About This User Manual Preface Manuals for this printer operation. Be sure to read this information to prevent troubles, malfunctions, or damage to equipment or property by operating - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 8
manual for the printer driver or other software may be different from the actual screens because of subsequent updates. • May we request • The information in this user manual is subject to change without notice. • We strive to ensure accuracy of information in this user manual, but - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 9
ends of the roll. Misalignment may cause feeding problems. • For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper Sizes.") Note →User's Guide (See "Types of Paper.") →User's Guide • To view instructions as you attach the Roll Holder, press the - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 10
Core Attachment with the holes (b) of the Holder Stopper and insert it firmly. Roll Holder (Right Side) No attachment is needed. Handling rolls 10 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 11
the right of the roll. Insert it firmly until the roll touches the flange (a) of the Roll Holder, leaving no gap. Handling rolls 11 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 12
these steps to load rolls in the printer. • Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas Note are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") →P.39 1 Press the Load button. 2 Press - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 13
holder so that the R label (c) on the [W label (c) on the Roll Holder flange is aligned with the R label (d) on the printer . Handling rolls 13 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 14
, based on the ManageRemainRoll setting and the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") →User's Guide ManageRemainRoll Barcodes Printer Operation After the Paper is Fed 14 Off Printed A menu for selection of the type of paper is automatically shown on - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 15
is soiled or if there are cuts from scissors or the blade Note after removing creased edges. (See "Specifying the Cutting Method for Rolls.") →User's Guide Removing the Roll from the Printer Remove rolls from the printer as follows. • If you need to cut the roll, see "Specifying the Cutting Method - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 16
. You will be unable to keep track of the amount of roll paper left. (See "Keeping Track of the Amount of Roll Paper Left.") →User's Guide 5 Positioning your hands as shown, open the Roll Cover. iPF760 Handling Paper Handling rolls 6 Using both hands, rotate the Roll Holder toward the back to - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 17
the Roll Holder Slot. Removing the Roll from the Printer Handling Paper Handling rolls • For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls." Note →User's Guide 8 Holding it at the positions indicated, close the Roll Cover. • To load new paper in - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 18
remove it. Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step. Note 18 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 19
Printer Handling Paper Handling sheets 3 Load a single sheet printing-side up in the Paper Feed Slot, with the right edge aligned with the Paper Alignment Guide (a) to the right of the Roll Cover. Insert the paper until the leading edge makes contact and you hear a tone. 19 Basic - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 20
OK button. The printer now starts feeding the paper. • For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.") Note →User's Guide Removing Sheets Remove sheets from the printer as follows. 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 21
the printer. 5 Holding the paper, push the Release Lever back and remove the sheet. Removing Sheets 6 Pull the Release Lever forward. Handling sheets 21 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 22
• M Ink Tank PFI-104M • Y Ink Tank PFI-102Y Ink Tanks • For instructions on Ink Tank replacement, see "Replacing Ink Tanks." →P.22 Note Replacing Ink Tanks Compatible level detection, which may damage the printer or cause other problems. Important • We recommend using up an Ink Tank in the course Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 23
button. In this case, you can skip the step Access the menu for ink tank replacement. Follow the instructions in Remove the ink tanks. • Do not remove an Ink Tank during initialization immediately after turning on the open the Ink Tank Cover. Remove the Ink Tank at this point. 23 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 24
cause stains. Put Caution the Ink Tank in a plastic bag and seal it. 24 • Dispose of used ink tanks according to local regulations. Note Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 25
Ink Tank 25 Important Lock Lever matches the color of the Ink Tank and check the orientation of the Ink Tank before reloading it. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 26
Maintenance and Consumables Replacing Ink Tanks 4 Push the Ink Tank Lock Lever closed until it clicks into place. 5 Make sure the Ink Lamp is lit in red. • If the Ink Lamp is not lit, reload the tank. Note 6 Close the Ink Tank Cover. iPF760 Ink Tanks 26 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 27
27 Printhead A replacement Printhead. • Printhead PF-04 Maintenance and Consumables Printheads • For instructions on replacing the Printhead, see "Replacing the Printhead." →P.27 Note Replacing the Printhead When is opened, the nozzles may dry out, which may affect printing quality. 27 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 28
because of the cutting method selected, cut it manually and remove it. (See "Cutting Roll Paper After Printing.") →User's Guide 2 Clean inside the Top Cover. (See " on the Display Screen instructing you to open the Top Cover. Replace the Printhead 1 Open the Top Cover. Instructions are now shown - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 29
(a) or Carriage Shaft (b). Touching these parts may damage Important them. • Never touch the metal contacts of the Carriage. This may damage the printer. 29 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 30
it completely. 5 Remove the Printhead and press the OK button. iPF760 Printheads • Dispose of the used Printhead in accordance with local regulations. Note 30 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 31
and affect printing quality. Important • Never touch the ink supply section (d). This may cause printing problems. 7 While firmly holding the Printhead you have removed, use your other hand to remove the orange material. Dispose of these materials in accordance with local regulations. 31 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 32
in place. 10 Push the Printhead Fixer Lever toward the back of the printer until it clicks. 11 Close the Top Cover. 32 iPF760 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 33
Auto(Advanced)) is performed if you have selected Rep.P.head Print > On in the Control Panel menu. (See "Menu Settings.") →User's Guide In this case, follow the instructions on the Display Screen for Printhead adjustment. If Rep.P.head Print is Off, perform Head Posi. Adj. ( Auto(Advanced)) yourself - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 34
34 Maintenance Cartridge A replacement Maintenance Cartridge. • Maintenance Cartridge MC-10 • For instructions on replacing the Maintenance Cartridge, see "Replacing the Maintenance Cartridge." →P.34 Note you to check the remaining capacity or replace the Maintenance Cartridge. 34 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 35
can skip the step Access the menu for Maintenance Cartridge replacement. Follow the instructions in Replace the Maintenance Cartridge. • Do not replace the Maintenance Cartridge during initialization the plastic bag and packaging material, and take out the Maintenance Cartridge. 35 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 36
used Maintenance Cartridge level as you put it in the plastic bag. Expel excess air from the plastic bag and seal the zipper. 36 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 37
, ink may leak and cause stains. Caution • In accordance with active and ongoing environmental programs, Canon supports recycling of used mainte- Note nance cartridges. Follow the instructions provided with the new Maintenance Cartridge that describe how to process the used Maintenance Cartridge - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 38
Replacing the Maintenance Cartridge 8 Press the OK button. The printer now initializes the Maintenance Cartridge. iPF760 Maintenance and Consumables Maintenance Cartridge 38 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 39
Cover about once a month to maintain better printing quality and help prevent problems. Also clean inside the Top Cover in the following situations to ensure optimal printing on small paper. Important • If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 40
the Top Cover to clean it. Wipe away any ink residue on the Platen as a whole (a), the Paper Retainer (b), Borderless Printing Ink Grooves (c), and Ejection Guide (d). iPF760 Cleaning the Printer 40 Basic - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 41
Carriage Shaft (b). Maintenance and Consumables Cleaning the Printer • When cleaning between the Platen and Ejection Guide, use a damp cloth that you have wrung out Note completely to wipe over the Output Tray Head Cleaning A or Head Cleaning B), depending on the problem 41 to resolve. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 42
ink is ejected at all, or if Head Cleaning A does not solve the problem. It takes about four minutes to complete. • Do not remove the Maintenance the Control Panel menu in Nozzle Check. (See "Menu Settings.") →User's Guide Perform cleaning as follows. 1 On the Tab Selection screen of the Control - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 43
The printer is off or is operating normally. d Power button (green) Turns the printer on and off. (See "Turning the Printer On and Off.") →User's Guide The Power button is lit when the printer is on or in Sleep mode. e Stop button 43 Cancels print jobs in progress and ends the - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 44
as well as other operations. (See "How to View Instructions With Navigate.") →User's Guide g Arrow buttons • ◀ button Press this button on loaded enables you to reposition the paper. (See "Feeding Roll Paper Manually.") →User's Guide m Cut button Pressing this button when rolls are loaded cuts the - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 45
will not display menus. Note Menus can be selected after you resolve the problem. Simply press buttons on the Control Panel to access menus on various tabs section describes menu operations and how they are presented in this User Manual. • Accessing menus →P.45 • Specifying menu items →P.46 • Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 46
next field for input. 2 Press the ▲ or ▼ button to enter the value. • Hold down ▲ or ▼ to increase or decrease the value continuously. Note 46 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 47
select the action to execute, and then press the OK button. The menu command is now executed. Printer Parts Operations and Display Screen 47 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 48
menu. For instructions on menu operations, see "Menu Operations." →P.44 For details on menu items, see "Menu Settings." →User's Guide Paper Menu Accuracy ┋ Standard *┋ Loose ┋ Off Cutting Mode (*6) Automatic ┋ Eject ┋ Manual Cut Speed Fast ┋ Standard ┋ Slow Trim Edge First Automatic ┋ Off ┋ - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 49
on the types of paper the printer supports, refer to the Paper Reference Guide. (See Paper Reference Guide.) Types of paper in the printer Palette Adjust Printer Head Posi. Adj. Auto(Standard) ┋ Auto(Advanced) ┋ Manual (*1) Head Inc. Adj. Feed Priori- Adj. Priority Automatic *┋ Print Quality - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 50
Level Maintenance Head Cleaning Adj. Quality (*2) Auto(GenuinePpr) ┋ Auto(OtherPaper) ┋ Manual Adjust Adjust- A:High ┋ B:Standard/Draft Length (*3) mentPrint Change A:High ┋ B: Palette B Software *┋ Smooth ThickenFi- Off *┋ On neLines 50 Adjust- Off ┋ On * FaintLines Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 51
. *┋ 30 min. ┋ 60 min. IPv4 (*8) IPv4 Mode Automatic ┋ Manual * (*8) Protocol DHCP (*8) On ┋ Off * (*4)(*8) BOOTP (*8) On Name (*9) DNS Domain Name (*9) IPv6 (*8) IPv6 Support (*8) On ┋ Off * IPv6 StlessAddrs (*8) ┋ Ethernet SNAP (*8) Print Service (*5)(*8) BinderyPServer ┋ RPrinter - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 52
Off *┋ On Use USB (*8) Use Ethernet (*8) Use RemoteUI (*8) On *┋ Off On *┋ Off On *┋ Off Reset PaprSetngs (*8) 52 Show Job Log (*8) Off ┋ On * Prep.MovePrinter Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 53
Priority is Automatic or Print Length. *4: Not displayed if IPv4 Mode is Manual. *5: Not displayed if NetWare is Off. *6: Not displayed if Auto Detect configuration is possible for administrators only. *10: Not displayed if IPv6 Support is Off. *11: Default setting for the time to enter the power - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 54
is full.) j Cutter Unit A round-bladed cutter for automatic roll cutting. 54 k Cutter Rail The Cutter Unit passes over this rail to cut paper. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 55
paper size. p Stand A stand that holds the printer. Equipped with casters to facilitate moving it. (See "Stand.") →User's Guide Side Printer Parts Printer parts a Manual Pocket Store printer manuals in this pocket. b Ethernet Port Connect an Ethernet cable to this port. The lamp is lit if the - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 56
jams. g Cleaning Brush When cleaning inside the printer under the Top Cover, use this brush to sweep away paper dust on the Platen. 56 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 57
the printer to correct misalignment of printed lines. b Printhead 57 The printhead is equipped with ink nozzles. The carriage serves a key role in printing. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 58
released. • Flashing Slowly Not much ink is left. • Flashing Rapidly There is no ink left. e Ink Tank Cartridges of ink in various colors. 58 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 59
space. (See "Checking the Remaining Maintenance Cartridge Capacity.") →User's Guide • Depending on the state of the printer, part replacement may be must be replaced, the message "Consumables must be replaced. Call for service." is Important shown on the Display Screen and preparation is not - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 60
up. Otherwise, ink may leak and cause stains. Note iPF760 Preparing to Transfer the Printer 4 Repeat steps 2 and 3 to remove all ink tanks. 60 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 61
the installation procedure in reverse. 5 Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box. 61 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 62
as follows. For detailed instructions, see the Setup Guide. Assemble the stand 1 Referring to the Printer Stand Setup Guide, assemble the Stand. position shown (a) and unlock all four casters. Moving the stand with the support rod lowered or the casters locked may cause injury or damage the area of - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 63
3 Connect the power cord to the Power Supply Connector on the right side of the printer. 4 Plug the power cord into the outlet. 63 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 64
. (See "Attaching the Roll Holder to Rolls.") →P.9 8 Load the roll Roll Media in the printer. (See "Loading Rolls in the Printer.") →P.12 64 iPF760 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 65
iPF760 9 Install the printer driver and manual. Note that the driver installation procedure varies depending on the type of connection. (See "Installing the Software (Windows).") →P. sure to reconfigure the printer's IP address. Printer Relocation Preparing to Transfer the Printer 65 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 66
. For detailed instructions, see the Setup Guide. Supported connection methods The printer driver works over USB or network (TCP/IP) connections. The driver installation procedure varies depending on the type of connection. Follow these steps to install the software and Electronic manuals. iPF760 - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 67
. Installing the Software (Windows) 5 When the Install User Manual dialog box is displayed, insert the provided User Manuals CD-ROM in the CD-ROM drive and follow the instructions displayed to complete installation. Software Installation Installing the Printer Driver (Windows) 67 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 68
as follows. For detailed instructions, see the Setup Guide. Supported connection methods The printer driver works over USB or network (Bonjour or IP) connections. Follow these steps to install the software and Electronic manuals. Installing the software and electronic manuals • When the printer is - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 69
the instructions displayed to register the printer to set up and update the paper information. Next, install the Electronic manuals. 7 Insert the provided User Manuals CD -ROM in the CD-ROM drive and follow the instructions displayed to - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 70
im- agePROGRAF Preview window will be displayed. • Under some settings and in some environments, PageComposer may be started. Note Convenient Printer Driver Features 70 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 71
Preview check box. 4. After you click Print, the Canon imagePROGRAF Preview window will be displayed. Print Preview Software Installation Convenient Printer Driver Features 71 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 72
Installation Convenient Printer Driver Features Configuring Settings in Mac OS X 1. Access the Page Setup pane. 2. Select the Rotate Page 90 degrees check box. 72 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 73
XXXX-Borderless (where XXXX is the size of the original) in Paper Size in the Page Attributes dialog box. (Mac Note OS X only) 73 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 74
size can be enlarged to fill the width of roll paper by completing simple printer driver settings. The printer supports roll printing up to a maximum length of 18.0 m (19.7 yd). Configuring Settings in Windows 1. /Reduced Printing check box. 5. Click Fit Roll Paper Width. 74 iPF760 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 75
pre- pared is displayed in Page Size. 4. Select the Enlarged/Reduced Printing check box. 5. Select Fit Paper Size, Fit Roll Paper Width, or Scaling. Basic Guide Enlarged/Reduced Printing 75 Convenient Printer Driver Features Software Installation - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 76
not possible as expected using highly transparent film or similar media, try another type of paper, or try Manual adjustment. (See "Manual Straightening of Lines and Colors (Head Posi. Adj.).") →User's Guide • When printing on special paper, or if printing is not improved after Auto(Advanced), try - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 77
on sheets smaller than A2 size for Auto(Advanced), a confirmation message is displayed requesting you to continue printing. Press the OK button and follow the instructions displayed. Adjustments for Better Print Quality Adjusting the Printhead 77 Basic - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 78
Adj. Priority, and then press the OK button. 7 Press ▲ or ▼ to select Automatic, Print Quality, or Print Length, and then press the OK button. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 79
. Note 3 Press the OK button. The Set./Adj. Menu is displayed. 79 4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button. Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 80
is longer, use a negative value. The feed amount can be adjusted in 0.02% increments. Adjustments for Better Print Quality Adjusting the feed amount 80 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 81
iPF760 Clearing Jammed Paper (Paper Feed Slot) Troubleshooting Problems Regarding Paper Clearing Jammed Paper (Paper Feed Slot 81 Clearing Jammed printer off. (See "Turning the Printer On and Off.") →User's Guide 2 Push the Release Lever back. Troubleshooting Problems Regarding Paper 81 Basic - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 82
(Paper Feed Slot) 3 Positioning your hands as shown, open the Roll Cover. iPF760 Troubleshooting Problems Regarding Paper 4 Fold an A4 sheet lengthwise four times and insert it through the gap of repeat steps 4 and 5. 7 Holding it at the positions indicated, close the Roll Cover. 82 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 83
the paper of the loaded roll. • When cutting paper, be careful to avoid injury or damage to the printer. Caution 2 Push the Release Lever back. Troubleshooting Problems Regarding Paper 83 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 84
Car- riage to the left or right side manually, away from the jam. iPF760 2. Clear any jammed paper from inside the Top Cover. After removing the paper, make sure there are no other scraps of paper in the printer. 3. Close the Top Cover. Troubleshooting Problems Regarding Paper 84 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 85
. 2. Remove the jammed paper from the Paper Feed Slot. After removing the paper, make sure there are no other scraps of paper in the printer. Troubleshooting Problems Regarding Paper 85 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 86
Clearing a Jammed Sheet • If the paper is jammed by the Ejection Guide Remove the jammed paper from the Output Tray. After removing the paper, make sure of the Control Panel. Remove the jammed paper as follows. 1 Push the Release Lever back. Troubleshooting Problems Regarding Paper 86 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 87
the left or right side manually, away from the jam. Clearing a Jammed Sheet 2. Clear any jammed paper from inside the Top Cover. After removing the paper, make sure there are no other scraps of paper in the printer. 3. Close the Top Cover. Troubleshooting Problems Regarding Paper 87 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 88
Remove the jammed paper from the Paper Feed Slot. After removing the paper, make sure there are no other scraps of paper in the printer. Troubleshooting Problems Regarding Paper 88 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 89
Guide Remove the jammed paper from the Output Tray. After removing the paper, make sure there are no other scraps of paper in the printer. Roll paper cannot be inserted into the paper feed slot 3 Pull the Release Lever forward. Troubleshooting Problems Cutter Unit. Specify Manual in Cutting Mode - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 90
Cutting Mode is Eject, press the Cut button to cut the paper. If the Cutting Mode is Manual, cut rolls with scissors or the like. Depression on the leading edge is left Cause Keeping a Roll Paper. (See "Loading Rolls in the Printer.") →P.12 Troubleshooting Problems Regarding Paper 90 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 91
Pause Print to Off. (See "Pausing Printing.") →User's Guide Set Use USB or Use Ethernet to On. (See "Menu Settings.") →User's Guide Ink Filling.. is displayed Cause The printer was forced off off. (Between about 30 seconds and two minutes.) Troubleshooting Printing does not start 91 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 92
. (See "Cutting the Leading Edge of Roll Paper Automatically.") →User's Guide Print a test pattern to check the nozzles and make sure the Printhead is "Menu Settings.") →User's Guide The printer is damaged. Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 93
Troubleshooting iPF760 Printing is faint Problems with the printing quality Printing is faint ...93 check the nozzles and see if they are clogged. (See "Checking for Nozzle Clogging.") →User's Guide Because the printer was left without ink tanks installed for some time, ink has become clogged in - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 94
(See "Adjusting the Printhead Height.") →User's Guide Be sure to select the correct type of paper in the Control Panel menu when loading paper. (See "Loading Rolls in the Printer.") →P.12 (See "Loading Sheets in the Printer.") →P.18 Troubleshooting Problems with the printing quality The edges of - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 95
Troubleshooting iPF760 Cause The Ejection Guide is soiled. Corrective Action (See "Cleaning the printer exterior.") →User's Guide "Menu Settings.") →User's Guide When paper that does not Settings.") →User's Guide The back side Manually.") →User's Guide User's Guide Click Manually.") →User's Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 96
Troubleshooting Banding in different colors occurs iPF760 Banding in different colors occurs Cause The paper feed amount is out of top To avoid uneven colors, we recommend drying each sheet separately. 96 of each other may cause uneven colors. Problems with the printing quality Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 97
Troubleshooting iPF760 Image edges are blurred or white banding occurs Cause Density may be uneven if you use Glossy Paper or type loaded in the (See "Loading Rolls in the Printer.") →P.12 97 printer. (See "Loading Sheets in the Printer.") →P.18 Problems with the printing quality Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 98
Troubleshooting Images are printed .).") →P.76 (See "Adjusting the Printhead Alignment Manually.") →User's Guide (See "Adjusting the Printhead Orientation.") →User's Guide Load paper of the same type as you printer driver and try printing again. Problems with the printing quality Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 99
For instructions on connecting the cable, refer to the Setup Guide. problem with the Ethernet cable. If there is any problem manually, specifying the communication mode in use. (See "Configuring the Communication Mode Manually.") →User's Guide Troubleshooting Guide The NetWare server and services - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 100
NetWare server and services are not Guide Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router. Make sure the computer and printer are on the same network. For information about network settings, ask your network administrator. Troubleshooting - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 101
to On. (See "Menu Settings.") →User's Guide Removing Installed Printer Drivers Follow these steps to remove printer driver as follows. • The following instructions are for Windows XP. The method of and then click Exit. Troubleshooting Installation problems Removing printer drivers and imagePROGRAF - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 102
Device Setup Utility > Uninstaller (imagePROGRAF Device Setup Utility) to start the wizard. 2 In the wizard window, click Delete, and then click Next. 3 Follow the instructions on the screen to remove imagePROGRAF Device Setup Utility. Troubleshooting Installation problems 102 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 103
is full. Cause An HP-GL/2 command not supported by this printer was received. The printer has and print again. (See "Menu Settings.") →User's Guide Troubleshooting Lines are printed too thick or thin in HP- (See "Menu Settings.") →User's Guide HP-GL/2 problems HP-GL/2 jobs are printed in - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 104
to On. The layout will be changed to the optimal layout. (See "Menu Settings.") →User's Guide HP-GL/2 printing takes a long time Cause Large print jobs with a lot of data take longer to to 300dpi and print again. (See "Menu Settings.") →User's Guide Troubleshooting HP-GL/2 problems 104 Basic - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 105
of the outlet and breaker. (See "Specifications.") →User's Guide Troubleshooting If the Printer Makes a Strange Sound Cause The printer makes half minutes.) In other cases, contact your Canon dealer. Other problems Messages advising to check the maintenance cartridge are not cleared Cause - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 106
the printer has been moved or stored for a long period or you are troubleshooting Printhead problems, we recommend not performing Head Cleaning B, to the extent possible. After initial Press ▲ or ▼ to select Information, and then press the OK button. Troubleshooting Other problems 106 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 107
select Yes, and then press the OK button. 6 Check the message and press the ▶ button. 7 Check the message and press the ▶ button. Ink Level Detection Troubleshooting Other problems 107 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 108
checking the message, press the ▶ button. 10 Press ▲ or ▼ to select Yes, and then press the OK button. Ink level detection is now released. iPF760 Troubleshooting Other problems 108 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 109
114 Paper jam ...114 Paper is crooked...114 Paper not aligned with right guide...115 Cannot detect papr ...115 Paper cutting failed...115 End of paper You can continue to print, but note that this error may cause problems in the printing results. Error Message Messages regarding paper The paper - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 110
can continue to print, but note that this error may cause problems in the printset to Warning, paper smaller than the size specified ing 2. Switch to paper A4/Letter (vertical) or larger. (See "unknown.") →User's Guide The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 111
of the printer during printing. Corrective Action 1. Press the Release Lever back and remove the paper. 2. Reload the sheet, aligning it with the guide on the right. 3. Pull the Release Lever forward. 4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis- play Screen - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 112
This paper cannot be used. Cause Paper smaller than the printer's minimum supported size has been loaded. Paper has been loaded that is too small to back and load paper of the correct size. (See "Paper Sizes.") →User's Guide Push the Release Lever back and load unused paper of A4 size or larger. - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 113
Rolls in the Printer.") →P.12 3. If no barcode was printed on the roll, specify the type of paper. (See "Changing the Type of Paper.") →User's Guide 4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the roll, also specify the paper length. (See - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 114
Printer.") →P.15 (See "Loading and Printing on Sheets.") →User's Guide Paper jam "Push the release lever back." Cause A paper jam occurred occurred when advancing the paper. Corrective Action 1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button. 2. Load the paper - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 115
of the printer menu. However, this may cause jams and printing problems because paper may Important be askew when printed. Also, the Platen paper and press the OK button. 2. Reload the sheet, aligning it with the guide on the right. (See "Loading Sheets in the Printer.") →P.18 Follow these step - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 116
types of paper. For details on the recommended environmental conditions for paper, see Paper Reference Guide." (See Paper Reference Guide.) You are using paper that is not compatible with automatic cutting. 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 117
the environment of use, it may become narrower or wider than the supported width for borderless printing. The paper is loaded askew. Corrective Action Press conditions for various paper, see the Paper Reference Guide. (See Paper Reference Guide.) Select None when you have set Detect Mismatch in - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 118
. Close Ink Tank Cover Cause The Ink Tank Cover is open. Corrective Action Close the Ink Tank Cover. Error Message Messages regarding ink 118 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 119
Corrective Action Load or reload the Ink Tank. (See "Replacing Ink Tanks.") →P.22 Messages regarding ink There is a problem with the Ink Tank. Replace it with a new Ink Tank. (See "Replacing Ink Tanks.") →P.22 Wrong ink tank . The buzzer will stop once the error is cleared. 119 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 120
Press the OK button to clear the error, and then adjust the feed amount manually. (See "Manual Banding Adjustment (Adj. Quality).") →User's Guide Check printed document. Cause The Printhead nozzles are becoming clogged. Corrective Action If printing is faint, clean the Printhead. (See "Cleaning - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 121
to check the nozzles. (See "Checking for Nozzle Clogging.") →User's Guide 3. Clean the Printhead if the nozzles are clogged. (See "Cleaning the See "Replacing the Printhead.") →P.27 Printhead error Cause There is a problem with the Printhead. Corrective Action Open the Top Cover and replace the - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 122
Printhead.") →P.41 If the message is still displayed when printing, replace the Printhead. (See "Replacing the Printhead.") →P.27 Error Message Messages regarding printheads 122 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 123
...123 No Maintenance Cartridge capacity...123 Maintenance cartridge full...123 Maintenance cartridge problem...123 Insert the maintenance cartridge. Cause The Maintenance Cartridge is not installed. Cartridge.") →P.34 Error Message Messages regarding the maintenance cartridge 123 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 124
The parameter is out of range 124 GL2: W0504 This command is not supported 124 This type of paper is not compatible with HP-GL/2. Cause The paper compatible with HP-GL/2, refer to the Paper Reference Guide. (See "Types of Paper.") →User's Guide Press ▲ or ▼ to select Print, and then press - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 125
Wxxxx (x represents a number) Cause Corrective Action There is a problem with the print job. Try printing again, using the correct Stopper has not been removed inside the Top Cover. An error requiring service may have occurred. Corrective Action Turn off the printer and remove the Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 126
time has passed. Cause Corrective Action It is past the recommended time to replace consumables for which service is required. Contact your Canon dealer for assistance. Unknown file. Cause Data sent to keep paper. 2. Pull the Release Lever forward. Error Message Other Messages 126 Basic Guide - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 127
out of range 124 GL2: W0504 This command is not supported 124 GL2: Wxxxx The memory is full. (xxxx is Maintenance cartridge full...123 Maintenance cartridge problem...123 MediaType Mismatch ...109 Multi-sensor ...114 Paper not aligned with right guide...115 Paper position not suitable for - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 128
Error Message iPF760 Unable to detect ink level correctly...118 Unknown file...126 Wrong ink tank...119 Wrong maintenance cartridge...123 Wrong printhead...121 128 Basic Guide Error Messages - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 129
, 39, 41, 56 Clearing a Jammed Sheet 86 Cutting Mode 44 D Device Setup Utility 102 E Ejection Guide 40, 55 F Feed Priority 78 G GARO Wxxxx (x represents a number 125 H Hardware error 125 Head 64 Rotate Page 90 degrees 72 S Strange Sound 105 Support Information 6 W When to replace 27 129 - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 130
130 - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 131
131 - Canon imagePROGRAF iPF760 MFP | Basic Guide - Page 132
iPF760 Basic Guide ENG Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042 U.S.A Canon Europe Ltd. 3 The
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
 |
 |
Large Format Printer
Basic Guide
Preface
Safety Precautions
......................................................
2
Manuals for this printer
...................................................
6
Handling Paper
Handling rolls
..................................................................
9
Handling sheets
............................................................
18
Maintenance and Consumables
Ink Tanks
......................................................................
22
Printheads
....................................................................
27
Maintenance Cartridge
.................................................
34
Cleaning the Printer
......................................................
39
Printer Parts
Operations and Display Screen
....................................
43
Printer parts
..................................................................
54
Printer Relocation
Preparing to Transfer the Printer
..................................
59
Software Installation
Installing the Printer Driver (Windows)
.........................
66
Installing the Printer Driver (Mac OS X)
.......................
68
Convenient Printer Driver Features
..............................
70
Adjustments for Better Print Quality
Adjusting the Printhead
................................................
76
Adjusting the feed amount
............................................
78
Troubleshooting
Problems Regarding Paper
..........................................
81
Printing does not start
...................................................
91
The printer stops during a print job
...............................
92
Problems with the printing quality
.................................
93
Cannot print over a network
.........................................
99
Installation problems
...................................................
101
HP-GL/2 problems
......................................................
103
Other problems
...........................................................
105
Error Message
Messages regarding paper
.........................................
109
Messages regarding ink
..............................................
118
Messages regarding printing or adjustment
................
120
Messages regarding printheads
.................................
121
Messages regarding the maintenance cartridge
.........
123
Messages regarding HP-GL/2
....................................
124
Other Messages
.........................................................
125
Error Messages
..........................................................
127
Manuals for this printer
Setup Guide
Basic Guide
User's Guide
Electronic manual
Paper Reference Guide
Electronic manual
ENG
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future referencing.
ver1.00
2011-12-27