Carvin V3 V3 Product Manual

V3 AMP SPECIFICATIONS:

RMS Power:

100, 50 or 25 watts (switched)

Output Impedance:

4, 8 or 16ohm (switched)

Input Impedance:

220kOhms

Chan.Tone Controls:

BASS, MID, TREBLE, PRESENCE, EQX

Ch 1 Sensitivity:

1mV for clipping

Ch 2 Sensitivity:

1mV for clipping

Ch 3 Sensitivity:

16mV for full output

Channels:

3 - switching

MIDI functions:

Channel, Effect Loops, Reverb, Boost, LED switching

100 available patch locations, CC control, IN / THRU

Voiced Line Out:

1.5 VAC @ 100 watts RMS

Preamp Tubes:

5: 12AX7’s (dual stage)

Power Amp Tubes:

4: EL34 (power pentode)

AC Power:

120VAC or 230VAC (switchable),

50-60Hz, 300VA

Fuse:

5x20mm, 120VAC:6A slow-blow, 230VAC:3A slow-blow

Cabinet Size:

inches (cm) WxHxD/ Net Weight

24.25” (616) x 10.5” (267) x 9.5” (241) /35lbs.(16kgs.)

Cabinet Material:

7-ply hardwood

Warranty:

One Year

Country of Mfg:

Made in USA

Options:

V3PSS

: Polished Stainless Steel Grill

CV3200

: Vinyl cover

FS44M

: 4 button LED footswitch for CH1-3, BOOST

FS22

: 2 button footswitch for Effect Loops

412VT

or

412VB

: matching 4x12 speaker cabinets

CARVIN ENGINEERING DATA

OPERATING MANUAL

Congratulations on your purchase of the

V3

all tube amplifier.

Carvin

has been building tube guitar amplifiers since 1949. They have been

used by top professionals like Frank Zappa, Steve Vai, Craig Chaquico,

Allan Holdsworth, and other great musicians. You will discover that

these amplifiers represent a significant sound improvement over con-

ventional amplifiers. Spend time with your new

V3

and get to know

its many sounds.

TECHNICAL DESIGN OF THE V3

The V3 design criteria was to build a high peformance 3-channel guitar ampli-

fier with an all-tube signal path. The V3 has the ability to produce ultra-high

gain and bass heavy sounds with the flexibility to cover all playing styles. The

V3 utilizes new ideas built upon proven tube amplifier technology with an exten-

sive set of features.

FLEXIBLE GAIN STRUCTURES

Each channel of the V3 offers three different gain modes that change the

way the amp reacts to your playing. Different preamp frequencies are

enhanced, giving each setting a different character. Unlike other 3-channel

amps, the V3 allows you to set-up both overdrive channels alike, then

change settings to achieve mild or drastic differences between the two chan-

nels.

MASTER EQUALIZATION

The V3 incorporates three master equalization controls: DEEP, MID CUT,

and BRIGHT. These controls affect the power amp output and allow you to

finalize your sound in a way not available on most amps.

TONE CONTROLS and EQX

The passive BASS, MID, TREBLE tone controls offer a wide range of tone

settings. The greater range of these controls comes from the use of high imped-

ance 1 meg sealed controls (many guitar amps use only 250k controls). The

EQX switch on each channel takes it one step further, offering a second range

of tones to control by shifting the frequencies affected by the tone controls.

The PRESENCE control is designed to adjust the “edge” on your sound. It’s

range allows for super-smooth warm sounds at lower settings or turn it up to

cut through.

TWO “SMART” EFFECT LOOPS + “SMART” REVERB

The

V3

features two switching effect loops, one series and one parallel. We called

them “Smart” loops because they recall their settings when you switch between

channels 1-3. For example, you can set both loops ON for channel 1, just

Loop 2 for Channel 2, and Loop 1 for channel 3, or any combination. The TAIL

switch activates the long tailed loop feature, switching off only the “send” and

leaving reverbs and delays to decay naturally the way it’s done in the recording

studio. The built-in Reverb will also switch for each channel in the same way.

GIVE YOURSELF A BOOST!

A switchable volume boost is available by footswitch or MIDI. Set the amount

of boost with the BOOST control. When turned on, it will boost your amp’s

output by up to 9dB for solos or any time you need to stand out in the mix.

MIDI MEMORY and CC Control

Set the Channel (1-3), Loops 1&2 (on/off), Reverb (on/off) and Boost

(on/off). Put the V3 in “learn” mode and it will assign your settings to the MIDI

patch number you choose from your controller. The V3 also responds to CC.

EL34 POWER TUBES

Your amp is equipped with EL34 power tubes because of their powerful output

and responsive tone. The characteristics of these power tubes respond to

the wide dynamic range of guitar playing. These tubes react to the touch. If

you play soft the tubes remain clean and if you increase your attack they

respond accordingly.

HIGH IMPEDANCE GUITAR INPUT

Carvin has long known about the effects of mis-loading a guitar pickup, which

can cause high frequency loss. The V3 guards against this loss with its ultra

high input impedance. We also considered the capacitance of the average

shielded guitar cable which can reduce the high frequency response of your

guitar pickups. Unlike other amplifiers, we purposely avoided adding capaci-

tance in the preamp to control high frequency oscillations. Instead, we control

oscillations through careful component layout and lead placement allowing its

shimmering highs to be reproduced.

76-33101A 0212

For your records, you may wish to record the following information.

Serial No._____________________

Invoice Date_______________

RECEIVING INSPECTION—read before getting started

INSPECT YOUR AMP FOR DAMAGE which may have occurred during shipping.

If damage is found, please notify the shipping company and CARVIN immediately.

SAVE THE CARTON & ALLPACKING MATERIALS. In the event you have to re-ship

your unit, always use the original carton and packing material. This will provide the

best possible protection during shipment. CARVIN and the shipping company are not

liable for any damage caused by improper packing.

SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.

SHIPMENT SHORTAGE. If you are missing items, they may have been shipped

separately. Please allow several days for the rest of your order to arrive before inquir-

ing.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on

this manual for your records. Keep your portion of the card and return the portion

with your name and comments to us.

V3 THREE CHANNEL TUBE GUITAR AMP

12340 World Trade Drive, San Diego, CA 92128

(800) 854-2235

www.carvin.com

c

V3

shown with optional V3PSS polished Stainless Steel grill

Carvin V3 V3 Product Manual

Carvin V3 Manual

Carvin V3 manual content summary: