Cisco 11154 Hardware Installation Guide

Cisco 11154 - CSS - Switch Manual

Get Cisco 11154 - CSS - Switch PDF manuals and user guides
UPC - 746320426549
View all Cisco 11154 manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 11154 manual content summary:

  • Cisco 11154 | Hardware Installation Guide - Page 1
    11000 Series Content Services Switch Hardware Installation Guide Software Version 6.10 July 2003 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 2
    this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco's installation instructions, it negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of
  • Cisco 11154 | Hardware Installation Guide - Page 3
    , and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the
  • Cisco 11154 | Hardware Installation Guide - Page 4
  • Cisco 11154 | Hardware Installation Guide - Page 5
    and Information xxiv Unpacking and Installing the CSS 1-1 Site Requirements 1-2 Required Tools and Equipment 1-2 Shipment Contents 1-2 Unpacking the CSS 1-3 Unpacking the CSS 11050 or CSS 11150 1-4 Unpacking the CSS 11800 1-4 Cisco 11000 Series Content Services Switch Hardware Installation Guide v
  • Cisco 11154 | Hardware Installation Guide - Page 6
    and LEDs 2-4 CSS 11150 Front Panel Connectors and LEDs 2-6 Cabling the CSS 11800 Modules 2-9 CSS 11800 Product Description 2-10 Switch Control Module Connectors and LEDs 2-12 Switch Control Module Connectors 2-12 Cisco 11000 Series Content Services Switch Hardware Installation Guide vi 78-15146
  • Cisco 11154 | Hardware Installation Guide - Page 7
    Interface 2-35 Troubleshooting the CSS Power Supply 2-36 Troubleshooting the CSS 11800 Modules 2-37 Specifications A-1 Electrical Specifications A-2 AC Power Cord Country Requirements A-3 Environmental Specifications A-4 Cisco 11000 Series Content Services Switch Hardware Installation Guide vii
  • Cisco 11154 | Hardware Installation Guide - Page 8
    Utilities A-8 Network Management A-9 DC Power Supply Safety Warnings A-9 Lithium Battery Disposal Warnings A-10 B A P P E N D I X Cable Pinouts B-1 RJ-45 Fast Ethernet Connector Pinouts B-2 RJ-45 RS-232 Serial Connector Pinouts B-3 RJ-45 to RJ-45 CSS Cisco Console Adapter Cable B-5 Custom Cable
  • Cisco 11154 | Hardware Installation Guide - Page 9
    and Telephone Company Procedures and Requirements C-4 Radio Frequency Interference C-5 If Problems Arise C-5 Korean Class A EMC Warning C-6 Korean Certification Information Other Traditional Chinese Markets C-9 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide ix
  • Cisco 11154 | Hardware Installation Guide - Page 10
    Contents Cisco 11000 Series Content Services Switch Hardware Installation Guide x 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 11
    a Module into a CSS 11800 Chassis 1-19 CSS 11151 Content Services Switch 2-2 CSS 11050 and CSS 11150 Rear Panel Connectors and LEDs 2-3 CSS 11051 Front Panel Connectors and LEDs 2-4 CSS 11052 Front Panel Connectors and LEDs 2-4 CSS 11151 Front Panel Connectors and LEDs 2-6 CSS 11152 Front Panel
  • Cisco 11154 | Hardware Installation Guide - Page 12
    27 Location of CSS 11150 DC Power Supply Connectors 2-28 Connecting a CSS 11800 AC Power Cord 2-30 Location of CSS 11800 DC Power Supply Connectors 2-31 Attaching Ferrites to a CSS 11050 or 11150 Console Cable 2-33 Cisco 11000 Series Content Services Switch Hardware Installation Guide xii 78-15146
  • Cisco 11154 | Hardware Installation Guide - Page 13
    Supply 2-36 Troubleshooting the CSS 11800 Modules 2-37 AC Electrical Specification A-2 DC Electrical Specifications A-2 AC Power Cord Country Requirements A-3 Environmental Specifications A-4 Physical Specifications A-4 Module General Specifications A-5 IDM Power Requirements A-6 Cisco 11000 Series
  • Cisco 11154 | Hardware Installation Guide - Page 14
    RJ-45 to RJ-45 Cisco Console Adapter Cable Pinouts B-5 CSS RJ-45 RS 232 Console Port, Adapter Cable Pinouts (Cable Not Reversible) B-7 CSS RJ-45 RS 232 Console C-2 CSS Manufacturing Date Code and Associated Year C-7 Cisco 11000 Series Content Services Switch Hardware Installation Guide xiv 78
  • Cisco 11154 | Hardware Installation Guide - Page 15
    is intended to help you install your Cisco 11000 Series Content Services Switches (CSS), models CSS 11050, CSS 11150, and CSS 11800. It provides you with instructions for installing, cabling, booting, and configuring the CSS. Information in this guide applies to all CSSs except where noted. This
  • Cisco 11154 | Hardware Installation Guide - Page 16
    the CSS, and troubleshooting the CSS console, modules, and power supply. Provides specifications for the CSS and components. Provides pinouts for each connector on the CSS. Provides information on regulatory compliance. Cisco 11000 Series Content Services Switch Hardware Installation Guide xvi
  • Cisco 11154 | Hardware Installation Guide - Page 17
    Content caveats, and CLI commands for the Cisco 11000 Services Switch series CSS. Cisco Content Services Switch Administration Guide Describes how to perform administration tasks on the CSS including logging into the CSS, upgrading your CSS software, and configuring the following: • Management
  • Cisco 11154 | Hardware Installation Guide - Page 18
    Related Documentation Preface Document Title Cisco Content Services Switch Basic Configuration Guide Cisco Content Services Switch Advanced Configuration Guide Description Describes how to perform basic CSS configuration tasks, including: • Services • Owners • Content rules • Sticky parameters •
  • Cisco 11154 | Hardware Installation Guide - Page 19
    Provides an alphabetical list of all CSS Command Line Interface commands including syntax, options, and related commands. Cisco Content Services Provides an overview on using the Device Switch Device Management user interface, an HTML-based Web Management User's Guide application that you use to
  • Cisco 11154 | Hardware Installation Guide - Page 20
    . Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool: http://www.cisco.com/en/US/partner/ordering/ordering_place_order_ordering_t ool_launch.html Cisco 11000 Series Content Services Switch Hardware Installation Guide xx
  • Cisco 11154 | Hardware Installation Guide - Page 21
    present) behind the front cover of your document or by writing to the following address: Cisco Systems Attn: Customer Document Ordering 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide xxi
  • Cisco 11154 | Hardware Installation Guide - Page 22
    support are available: the Cisco TAC website and the Cisco TAC Escalation Center. The type of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable. xxii Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 23
    to help troubleshoot and resolve technical issues with Cisco products and technologies. To access the Cisco TAC website, go to this URL: http://www.cisco.com/tac All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on
  • Cisco 11154 | Hardware Installation Guide - Page 24
    Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL: http://www.ciscopress.com xxiv Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 25
    .html • Training-Cisco offers world-class networking training. Current offerings in network training are listed at this URL: http://www.cisco.com/en/US/learning/le31/learning_recommended_training _list.html 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide xxv
  • Cisco 11154 | Hardware Installation Guide - Page 26
    Obtaining Additional Publications and Information Preface xxvi Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 27
    a CSS 11800 Module Note For information on installing a replacement or accessory item in the CSS 11800 (such as a redundant AC or DC power supply, or fan unit) consult the reference sheet included with the item. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-1
  • Cisco 11154 | Hardware Installation Guide - Page 28
    following items except where noted: • Content Services Switch • Anti-static wrist strap (CSS 11800 only) • Four rubber feet (CSS 11050 and CSS 11150) • Mounting brackets and hardware (CSS 11050 and CSS 11150) Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-2 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 29
    install all separately ordered items (for example, I/O modules or a redundant AC or DC power supply) into the CSS 11800. This section describes: • Unpacking the CSS 11050 or CSS 11150 • Unpacking the CSS 11800 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-3
  • Cisco 11154 | Hardware Installation Guide - Page 30
    chapter. 4. Using a Phillips screwdriver, remove the screws from the shipping brackets on the pallet. Figure 1-1 shows the CSS 11800 attached to the wooden pallet. 5. Carefully remove the CSS from the pallet. Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-4 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 31
    transit, forward an immediate request to the delivering carrier to perform an inspection of the product and to prepare a damage report. Save the container and all packing materials until the contents are verified. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 32
    components available with the CSS 11050 and CSS 11150. Do not use a 3-prong to 2-prong electrical adapter. This will compromise the grounding. Note Removing the CSS 11050 or CSS 11150 cover voids its warranty. Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-6 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 33
    cord. Rack-Mounting the CSS 11050 or CSS 11150 Before you rack-mount the CSS 11050 or CSS 11150: • Determine if you want to front-mount or mid-mount the CSS chassis into the cabinet. mid-mounting the brackets. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-7
  • Cisco 11154 | Hardware Installation Guide - Page 34
    pan-head screws. To install the CSS 11050 or CSS 11150 into an equipment rack: 1. Raise the CSS to the installation height. Align the screw holes on the mounting bracket with the holes on the equipment rack. Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-8 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 35
    location of the mounting brackets on the CSS 11800 chassis from a front-mount position to a mid-mount position (see Figure 1-4): 1. Remove the seven front mounting bracket screws from one side of the chassis. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-9
  • Cisco 11154 | Hardware Installation Guide - Page 36
    of the seven #10-32 pan-head screws through the mid-mount bracket holes into the CSS. Do not install the screws in the top of the bracket or second from the bottom "Rack-Mounting the CSS 11800 Chassis" section. 1-10 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 37
    rack: • The screw holes toward the front of the bracket position each bracket on the CSS 11800 chassis for front mounting in a cabinet; this is the preinstalled position. • The screw 78-15146-02 Left bracket Left bracket Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-11
  • Cisco 11154 | Hardware Installation Guide - Page 38
    a Phillips screwdriver, install the seven #10-32 pan-head screws through the extended-mount bracket holes into the CSS. 4. Repeat steps 1 through 3 to install the second bracket onto the other side of the chassis. Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 39
    mounting bracket with the screw holes on the equipment cabinet and install the pan-head screws through the CSS and cabinet brackets. The CSS 11800 requires five pan-head screws for each side of the chassis. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-13
  • Cisco 11154 | Hardware Installation Guide - Page 40
    CSS Installing a CSS 11800 Module This section applies to the CSS 11800 modules only and contains the following sections: • Installation Precautions and Restrictions • Unpacking a CSS into the CSS 11800 chassis to servicing the CSS CSS you do not power down the CSS 11800, an electrical energy hazard
  • Cisco 11154 | Hardware Installation Guide - Page 41
    Slot Restrictions Modules are restricted to specific slots due to bandwidth capabilities. The CSS 11800 chassis backplane is designed for specific modules to reside in their respective Blue Blue Blue Green 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-15
  • Cisco 11154 | Hardware Installation Guide - Page 42
    Installing a CSS 11800 Module Chapter 1 Unpacking and Installing the CSS Figure 1-7 illustrates a fully configured CSS 11800. Figure 1-7 Fully Configured CSS 11800 Slot 1 Slot 15 49572 1-16 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 43
    anti-static bag, from the shipping carton. 3. Put on the anti-static strap provided with your CSS. 4. Remove the module from the anti-static shielding bag and inspect it for damage. Always your local supplier. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-17
  • Cisco 11154 | Hardware Installation Guide - Page 44
    the "Installing a Module" section. Installing a Module You must power down the CSS 11800 chassis to install a module. Note For the procedure on installing a passive the chassis to expose a slot for the module. 1-18 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 45
    Installing the CSS Installing a CSS 11800 Module 3. Insert the module into the board guides at the top and bottom of the slot and slide it into the chassis by pressing firmly at connector above its transmit connector. Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-19
  • Cisco 11154 | Hardware Installation Guide - Page 46
    a passive SCM or SFM: 1. Properly ground yourself prior to handling the module. 2. If the CSS is powered up, power it down. 3. As defined in Table 1-1: • SCMs are restricted to the chassis to expose a slot. 1-20 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 47
    . 3. A passive SFM becomes active automatically. Note When the CSS 11800 chassis contains two passive SFMs or SFM2s and an active switchover occurs, both passive SFMs or SFM2s switchover to become active SFMs. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 1-21
  • Cisco 11154 | Hardware Installation Guide - Page 48
    Installing a CSS 11800 Module Chapter 1 Unpacking and Installing the CSS 1-22 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 49
    to connect the AC or DC power cord. This chapter also describes the CSS LEDs and connectors. The information in this chapter applies to the CSS 11050, CSS 11150, and CSS 11800 except where or the home Web site. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-1
  • Cisco 11154 | Hardware Installation Guide - Page 50
    Ethernet (10BASE-T/100BASE-TX) interfaces. Figure 2-1 CSS 11151 Content Services Switch 49574 The CSS 11050 configuration supports: • Eight auto-sensing 10/100-Mbps TX) interfaces for a total of 16 interfaces Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-2 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 51
    Chapter 2 Cabling the CSS Cabling the CSS 11050 and CSS 11150 CSS 11050 and CSS 11150 Rear Panel Connectors and LEDs The CSS 11050 and CSS 11150 have connectors and LEDs on their front and rear panels. The rear panel has an AC connector (or DC connector on a CSS 11150), an Ethernet management RJ-
  • Cisco 11154 | Hardware Installation Guide - Page 52
    laser wavelength of 850 nm and use SC-type fiber connectors. Figure 2-4 CSS 11052 Front Panel Connectors and LEDs Console Diag RS-232 Gigabit Ethernet port ( Status Ready 1000BASE-SX Link/Sync Rx Tx 49577 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-4 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 53
    CSS is accessing the disk No transmit packet activity Transmit activity detected No receive packet activity Receive activity detected No link Link exists and synchronization achieved Link exists but not synchronized 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 54
    example, the CSS 11151 front panel in Figure 2-5 has: • One RS-232 Console connector (9600 baud) • One RS-232 Diag connector, reserved for field service use only 13 141516 LD1i0un/pk1/l0eA0xct 1000BASE-TX 49579 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-6 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 55
    6 7 8 9 10 1112 LD1i0un/pk1/l0eA0xct Power Status Ready 1000BASE-SX Link/Sync Rx Tx 49581 Note The CSS 11155 has a similar appearance to the CSS 11154, but its memory size per port is 8 MB instead of 4 MB. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-7
  • Cisco 11154 | Hardware Installation Guide - Page 56
    is booting On CSS is operational Blinking CSS is accessing the disk Off No transmit packet activity Blinking Transmit activity detected Off No receive packet activity Blinking Receive activity detected Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-8 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 57
    (Gigabit ports on the CSS 11154 or CSS 11155) Color Green Link (Fast Ethernet FX ports on the CSS 11153) Act (Fast Ethernet FX ports on the CSS 11153) Green Green State and LEDs • Internal Disk Module LEDs 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-9
  • Cisco 11154 | Hardware Installation Guide - Page 58
    flows or 16 megabytes of flow connection memory supporting up to 128,000 simultaneous flows • Optional flash-based Internal Disk Module (IDM), model CSS8-IDM-MEM-HD, in place of the hard drive-based IDM 2-10 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 59
    Chapter 2 Cabling the CSS Cabling the CSS 11800 Modules Figure 2-9 illustrates a CSS 11800. Figure 2-9 CSS 11800 Content Services Switch 49582 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-11
  • Cisco 11154 | Hardware Installation Guide - Page 60
    CSS Switch Control Module Connectors and LEDs The Switch Control Module (SCM) provides master control and packet memory Building Integrated Timing Service support While only one service diagnostic use only) 2-12 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 61
    Chapter 2 Cabling the CSS Cabling the CSS 11800 Modules • One RJ-45 Building Integrated Timing Supply (BITS) Clock RS-422 connector • connector Diag connector Timing BITS connector Module ejector 49583 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-13
  • Cisco 11154 | Hardware Installation Guide - Page 62
    11800 Modules Chapter 2 Cabling the CSS Switch Control Module LEDs The SCM front panel LEDs indicate module and configuration status. functioning Power supply is not functioning Power supply is functioning 2-14 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 63
    port. Initially, the terminal settings must match the CSS default settings as specified in Table 2-5. Table 2-5 CSS Console Port Default Settings Parameter Baud Rate Data Bits Flow -FX SC fiber connectors 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-15
  • Cisco 11154 | Hardware Installation Guide - Page 64
    11800 Modules Chapter 2 Cabling the CSS Each model contains Power, Status, and Ready LEDs for module status and Duplex, Speed, LED Link LEDs Module ejector RJ-45 10BASE-T/100BASE-TX connectors 49584 2-16 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 65
    Chapter 2 Cabling the CSS Cabling the CSS 11800 Modules Figure 2-12 illustrates the LEDs and connectors on the FEM model CSS8-IOM-6/2/ ejector RJ-45 10BASE-T/100BASE-TX connectors Fiber SC connectors 49585 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-17
  • Cisco 11154 | Hardware Installation Guide - Page 66
    11800 Modules Chapter 2 Cabling the CSS Fast Ethernet Module LEDs The FEM front panel LEDs and 16 MB Flow Cache SRAM memory supporting up to 128,000 simultaneous flows. CSS8-GBIC-SX is sold separately. 2-18 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 67
    Chapter 2 Cabling the CSS Cabling the CSS 11800 Modules Figure 2-13 illustrates the LEDs and connectors on a GEM. Figure 2- transmit) Ports 2 through 4 for additional GBIC connectors 4 Module ejector 49586 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-19
  • Cisco 11154 | Hardware Installation Guide - Page 68
    Modules Chapter 2 Cabling the CSS Gigabit Ethernet Module LEDs The GEM front panel LEDs indicate module status (Power, Status link Link exists and synchronization achieved Link exists but not synchronized 2-20 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 69
    chassis, of which only two would be active at any time. Note When the CSS 11800 contains two passive SFMs and an active SFM switchover occurs, both passive SFMs for field service diagnostic use only). 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-21
  • Cisco 11154 | Hardware Installation Guide - Page 70
    11800 Modules Chapter 2 Cabling the CSS Figure 2-14 illustrates the SFM front panel LEDs and connectors. on each connector (all of these connectors are reserved for field service diagnostic use only). 2-22 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 71
    Chapter 2 Cabling the CSS Cabling the CSS 11800 Modules Note These connectors are for serial data only and are not compatible 1 Console/diag connectors Diag 2 (Diag 1 and Diag 2) Module ejector 49588 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-23
  • Cisco 11154 | Hardware Installation Guide - Page 72
    11800 Modules Chapter 2 Cabling the CSS SFM and SFM2 LEDs The SFM and SFM2 front panel LEDs indicate operating and configuration status. CSS8-IDM-MEM-FD) or hard drive-based (model CSS8-IDM-MEM-HD) IDM. 2-24 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 73
    Chapter 2 Cabling the CSS Figure 2-16 Internal Disk Module LEDs Cabling the CSS 11800 Modules Module ejector Power LED Status LED Active LED Module ejector 49589 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-25
  • Cisco 11154 | Hardware Installation Guide - Page 74
    or CSS 11150 Power Cord The following sections provide information on: • Connecting a CSS 11050 or CSS 11150 AC Power Cord • Connecting a CSS 11150 DC Power Cord Note The CSS 11050 is only available in an AC version. 2-26 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78
  • Cisco 11154 | Hardware Installation Guide - Page 75
    The CSS 11150 draws a maximum of 25 amps. Warning DC systems do not have a power switch. A chassis configured for DC power requires an external power disconnect device (such as an external circuit breaker). 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-27
  • Cisco 11154 | Hardware Installation Guide - Page 76
    , respectively). Warning Before installing a wire, ensure that the polarity of the DC connections is correct. Reversed polarity causes damage to the DC power supply and can create a dangerous shock hazard. 2-28 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 77
    provide information for connecting an AC or DC power cord to a CSS 11800. Note For information on installing a redundant AC or DC power supply, consult the reference sheet included with the power supply. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-29
  • Cisco 11154 | Hardware Installation Guide - Page 78
    Cord Before you install a DC power cord, see Appendix A, Specifications for DC power supply safety warnings. Warning The DC power supply cord requires 12 AWG wire. The CSS 11800 draws a maximum of 25 amps. 2-30 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 79
    the DC terminal block on the front of the chassis as shown in Figure 2-20. Figure 2-20 Location of CSS 11800 DC Power Supply Connectors .35" (9mm) +- PS1 DC Terminal block PS2 DC Terminal block 49593 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-31
  • Cisco 11154 | Hardware Installation Guide - Page 80
    port on the CSS 11050 or CSS 11150 front panel, or to the CSS 11800 SCM panel. Your terminal settings must match the following CSS default settings: • Baud Rate: 9600 • Data Bits: 8 • Flow Control: none 2-32 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 81
    Connecting the Console to the CSS • Parity: none • Stop Bits: 1 On the CSS 11050 or 11150 console cable, port. 2. Attach the second ferrite behind the first ferrite. Figure 2-21 Attaching Ferrites to a CSS 11050 or 11150 Console Cable 59685 CONSOLE Snap-on ferrite (one of two) .75 inch space
  • Cisco 11154 | Hardware Installation Guide - Page 82
    general troubleshooting information for the CSS components. It includes the following sections: • Troubleshooting the Console Interface • Troubleshooting the CSS Power Supply • Troubleshooting the CSS 11800 Modules 2-34 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78
  • Cisco 11154 | Hardware Installation Guide - Page 83
    the command you want. Ensure that you enter enough characters for the CSS to distinguish between different commands and options. Random characters are lost. Set the flow command on the console to XON/XOFF. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-35
  • Cisco 11154 | Hardware Installation Guide - Page 84
    for correcting problems that may occur with the CSS 1800 power supplies (AC or DC). The power supply status LED is on the SCM. Table 2-14 Troubleshooting the CSS 11800 Power the deficient line condition. 2-36 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 85
    Table 2-15 provides suggestions for correcting problems that may occur with the modules. Table 2-15 Troubleshooting the CSS 11800 Modules Symptom Recommended Action System cannot file). Replace the module. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide 2-37
  • Cisco 11154 | Hardware Installation Guide - Page 86
    currently on the disk or instruct the CSS where to locate the CSS software ADI file to install on the disk. If you archived an offline version of your CSS running-config file, copy it back onto the CSS. 2-38 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 87
    specifications for the Cisco 11000 Series Content Services Switches (CSS 11050, CSS 11150, and CSS 11800): • Electrical Specifications • Environmental Specifications • Physical Specifications • Module Specifications • Internal Disk Module Specifications • Supported Protocols • DC Power Supply Safety
  • Cisco 11154 | Hardware Installation Guide - Page 88
    DC Specification CSS 11150 Voltage DC -48.0 to -60.0 VDC Current DC (maximum) 8 Amps Power Consumption (maximum) 300 Watts Heat Dissipation 683 BTU/hr CSS 11800 -48.0 to -60.0 VDC 25 Amps 970 Watts 3073 BTU/hr Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 89
    AC Power Cord Country Requirements The CSS AC power cord is a three-prong IEC 320-C13 plug that grounds the unit and polarizes the connection. Table A-3 lists country requirements for plug types and ratings. Table A-3 AC 02 Cisco 11000 Series Content Services Switch Hardware Installation Guide A-3
  • Cisco 11154 | Hardware Installation Guide - Page 90
    16 lbs. CSS 11800 25.25" x 17.1" x 12.5" 105 lbs. (base system containing one power supply, one SFM or SFM2, one SCM, IDM) 72 lbs. (base system containing one power supply, one SFM or SFM2, one SCM, IDM) Cisco 11000 Series Content Services Switch Hardware Installation Guide A-4 78-15146
  • Cisco 11154 | Hardware Installation Guide - Page 91
    Switch Bandwidth CPU Memory (DRAM) CSS 11050 or CSS 11150 Fixed configuration 5 GB CSS 11050 128 MB CSS 11800 8 slots 20 GB (base) 20 GB 1:1 optional redundancy Switch Control Module 128 MB Common Packet Memory (SRAM) CSS 11150 128 MB (base) with a maximum of 256 MB Per System 6 MB Switch
  • Cisco 11154 | Hardware Installation Guide - Page 92
    A-8 defines IDM general specifications. Table A-8 IDM General Specifications Specification Capacity Interface Hard Disk 1.08 GB minimum EIDE or ATA-3 Flash Disk 350 MB minimum IDE Cisco 11000 Series Content Services Switch Hardware Installation Guide A-6 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 93
    The CSS supports the following transport protocols: • TCP • UDP Network The CSS supports the following network protocols: • Internet Protocol (IP) • ICMP • Address Resolution Protocol (ARP) • Inverse ARP 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide A-7
  • Cisco 11154 | Hardware Installation Guide - Page 94
    application protocols: • HTTP 1.0, HTTP 1.1 • TELNET • FTP, TFTP • RTP Network Utilities The CSS supports the following network utility protocols: • DNS Client • Radius Client • HTTP Client • FTP Daemon Cisco 11000 Series Content Services Switch Hardware Installation Guide A-8 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 95
    ANSI/NFPA 70. Connect a DC CSS 11150 or CSS 11800 to a -48 VDC source that is electrically isolated from the AC power source and is reliably DC source and the point of connection of the grounding electrode conductor. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 96
    readily accessible disconnect device must be provided in the fixed wiring for a DC power supply. It must be suitable for the rated voltage and current skje i henhold til nasjonale lover og forskrifter. A-10 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 97
    realizarse según todas las leyes y regulaciones nacionales. Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets alla lagar och föreskrifter. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide A-11
  • Cisco 11154 | Hardware Installation Guide - Page 98
    Lithium Battery Disposal Warnings Appendix A Specifications A-12 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 99
    : • RJ-45 Fast Ethernet Connector Pinouts • RJ-45 RS-232 Serial Connector Pinouts • RJ-45 to RJ-45 CSS Cisco Console Adapter Cable • Custom Cable Pinouts for Attaching the CSS Console Port to a Communication Server • RJ-45 Timing BITS Connector Pinouts • RJ-45 Management Connector Pinouts 78-15146
  • Cisco 11154 | Hardware Installation Guide - Page 100
    8 Crossover Cable Pinouts 3 6 1 4 5 2 7 8 When using the Fast Ethernet connectors to connect the CSS to a: • Server or a workstation, use a straight-through cable • Switch or a repeater, use a crossover cable Cisco 11000 Series Content Services Switch Hardware Installation Guide B-2 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 101
    interfaces for the: • Console and Diag ports on all CSS 11050 and CSS 11150, and CSS 11800 Switch Control Module (SCM) and Switch Fabric Module ( the RJ-45-to-DB-9 or RJ-45-to-DB-25 console cables supplied in the CSS Console cable kit. Table B-3 RJ-45 Connector to a DB-9 or DB-25 Connector Console
  • Cisco 11154 | Hardware Installation Guide - Page 102
    for the SFM2 Diag1 and Diag2 Port Signal Name Not Used TXD - Console RXD - Console GND TXD - Diag RXD - Diag GND Not Used Pin Number 1 2 3 4 5 6 7 8 Cisco 11000 Series Content Services Switch Hardware Installation Guide B-4 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 103
    server port. Table B-6 RJ-45 to RJ-45 Cisco Console Adapter Cable Pinouts Signal Name DTR TXD RXD RTS CTS DSR GND DCD - RJ-45 Male Pin Numbers 1 2 3 4 5 6 7 8 RJ-45 Female Pin Numbers 2 3 6 1 8 7 4 5 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide B-5
  • Cisco 11154 | Hardware Installation Guide - Page 104
    a communication server. The CSS 11050, CSS 11150, and CSS 11800 support connection from their RJ-45 RS-232 Console port to a Cisco Systems router functioning as a communication server. To make the connection between a CSS and a Cisco communication server, you must make your own adapter cable or full
  • Cisco 11154 | Hardware Installation Guide - Page 105
    ) Communication Server Signal Name DSR RXD GND TXD DTR Communication Server Pin Number 2 3 4 6 7 CSS Console Port CSS Console Port Pin Number Signal Name 6 Not Used 3 TXD 7 GND 2 RXD 4 Not Used 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide B-7
  • Cisco 11154 | Hardware Installation Guide - Page 106
    on the: • CSS 11050 and CSS 11150 rear panel • CSS 11800 front panel Table B-10 RJ-45 Management Connector Pinouts Signal Name TX + TX RX + Unconnected Unconnected RX Unconnected Unconnected Pin Number 1 2 3 4 5 6 7 8 Cisco 11000 Series Content Services Switch Hardware Installation Guide B-8 78
  • Cisco 11154 | Hardware Installation Guide - Page 107
    the regulatory agencies that have approved the Cisco 11000 Series Content Services Switches (CSS 11050, CSS 11150, and CSS 11800). This appendix also includes a sample Taiwan and Other Traditional Chinese Markets 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide C-1
  • Cisco 11154 | Hardware Installation Guide - Page 108
    Regulatory Standards Compliance The following regulatory agencies have approved the CSS and have found it to be fully compliant with their • GS Mark • FCC Part 15 • EN55022 • EN50082-1 • VCCI • UL • TUV • BABT Cisco 11000 Series Content Services Switch Hardware Installation Guide C-2 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 109
    be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a é en suivant une méthode acceptée de 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide C-3
  • Cisco 11154 | Hardware Installation Guide - Page 110
    aux conditions énoncées ci-dessus n'empêche pas la dégradation du service dans certaines situations. Les réparations de matériel homologué doivent être coordonn number or service code, as applicable, by position Cisco 11000 Series Content Services Switch Hardware Installation Guide C-4 78-15146
  • Cisco 11154 | Hardware Installation Guide - Page 111
    the problem and informed of your right to file a complaint with the FCC. In the event repairs are needed on this equipment, they should be performed by Cisco Systems or an authorized representative of Cisco Systems. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 112
    and its translation apply to CSS 11000 series models that meet the Cisco Systems, Inc. • Manufacturing Date: (To determine the date, see the explanation later in this section) • Manufacturer/Nationality: Cisco Systems, Inc./USA Cisco 11000 Series Content Services Switch Hardware Installation Guide
  • Cisco 11154 | Hardware Installation Guide - Page 113
    Manufacturing Date year of the CSS model is embedded in the line of text under the Cisco serial number bar code. The a coded format. To determine the year of the Manufacturing Date, see Table C-2. Table C-2 CSS Manufacturing Date Code and Associated Year Code (YY) 01 02 03 04 05 06 07 Associated
  • Cisco 11154 | Hardware Installation Guide - Page 114
    apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijnen 73/23/EEC en 89/336/EEC zoals gewijzigd door richtlijn 93/68/EEC. Cisco 11000 Series Content Services Switch Hardware Installation Guide C-8 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 115
    EEC e 89/336/EEC, conforme amendados pela Directiva 93/68/EEC. Suomalainen: Cisco 11000 series CSS Tämä laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten muutettu to take appropriate countermeasures. 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide C-9
  • Cisco 11154 | Hardware Installation Guide - Page 116
    Class A Warning for Taiwan and Other Traditional Chinese Markets Appendix C Regulatory Information C-10 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • Cisco 11154 | Hardware Installation Guide - Page 117
    cord) A-3 CSS 11050 cabling 2-1 front panel connector and LEDs 2-3, 2-4 grounding 1-6 installation 1-6 installing 1-6 LED definitions 2-5 mounting brackets 1-7 rack-mounting 1-7 rear panel connector and LEDs 2-3 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide IN
  • Cisco 11154 | Hardware Installation Guide - Page 118
    DC electrical specifications A-2 DC power cord connecting CSS 11150 2-27 connecting CSS 11800 2-30 DC power supply connector location for CSS 11150 2-28 connector location for CSS 11800 2-31 proper wiring sequence for CSS Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-
  • Cisco 11154 | Hardware Installation Guide - Page 119
    balancing power supplies 2-37 log files troubleshooting 2-38 M mid-mounting CSS 11800 brackets 1-9 module installation precautions 1-14 installing 1-14, 1-18 Internal Disk Module 2-24 passive switchover 1-20 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide IN-3
  • Cisco 11154 | Hardware Installation Guide - Page 120
    connector B-8 RJ-45 to RJ-45 Cisco console adapter cable B-5 power cords connecting 2-26 country requirements A-3 power supply load balancing 2-37 troubleshooting 2-36 protocols, supported A-7 to A-9 R rack-mounting CSS 11050 1-7 CSS 11150 1-7 radio frequency interference C-5 Regulatory Standards
  • Cisco 11154 | Hardware Installation Guide - Page 121
    T telephone company procedures and requirements C-4 equipment problem resolution C-5 FCC and Telephone Company procedures and requirements C-4 terminal setting for console 2-32 tools and equipment required 1-2 78-15146-02 Cisco 11000 Series Content Services Switch Hardware Installation Guide IN-5
  • Cisco 11154 | Hardware Installation Guide - Page 122
    Index IN-6 Cisco 11000 Series Content Services Switch Hardware Installation Guide 78-15146-02
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel:
408 526-4000
800 553-NETS (6387)
Fax:
408 526-4100
Cisco 11000 Series Content Services
Switch Hardware Installation Guide
Software Version 6.10
July 2003
Text Part Number: 78-15146-02
Customer Order Number: DOC-7815146=