Cisco 2432 Hardware Installation Guide

Cisco 2432 - IAD Router Manual

Get Cisco 2432 - IAD Router PDF manuals and user guides View all Cisco 2432 manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 2432 manual content summary:

  • Cisco 2432 | Hardware Installation Guide - Page 1
    Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 2
    are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0809R) Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide Copyright © 2003 - 2008 Cisco Systems, Inc. All rights reserved.
  • Cisco 2432 | Hardware Installation Guide - Page 3
    Obtaining Documentation and Submitting a Service Request xvi Overview of Cisco IAD2430 Series IADs 1 Overview 1 Cisco IAD2430-24FXS IAD 3 Cisco IAD2431-8FXS IAD 3 Cisco IAD2431-16FXS 4 Cisco IAD2431-1T1E1 IAD 4 Cisco IAD2432-24FXS IAD 5 Cisco IAD2435-8FXS IAD 5 Physical Description 6 LEDs 7 Chassis
  • Cisco 2432 | Hardware Installation Guide - Page 4
    Chassis 6 Mounting Screws 7 Attaching the Brackets 7 Installing the Cisco IAD2430 Series IADs in a Rack 8 Wall-Mounting the Chassis 9 Wall-Mounting the Cisco IAD2430, Cisco IAD2431, and Cisco IAD2432 IADs 9 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide iv OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 5
    Cables 19 Connecting the Input Power 21 Cable 21 Procedure 21 Connecting Input Power on the Cisco IAD2435 IAD 21 Connecting the Console Port to a PC or an ASCII Terminal 22 Cable 22 30 Ports, Connectors, and Pinouts 31 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide v
  • Cisco 2432 | Hardware Installation Guide - Page 6
    Command Facility 4 Manual Configuration 6 Obtaining Your Network Information 6 Setting the Fast Ethernet Port IP Address 6 Configuring a T1/E1 Port for a WAN Connection 7 Configuring Digital Voice 8 Verifying and Saving Your Configuration 8 Troubleshooting 9 Cisco IAD2430 Series Integrated Access
  • Cisco 2432 | Hardware Installation Guide - Page 7
    of This Guide Title Description Overview of Cisco IAD2430 Features and specifications of Cisco IAD2430 series Series IADs integrated access devices. Planning Your Installation Environmental requirements and cable routing considerations. Installing Cisco IAD2430 Series IADs Instructions for
  • Cisco 2432 | Hardware Installation Guide - Page 8
    help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a .cisco.com/en/US/products/hw/gatecont/ps887/prod_installation_guides_list.html Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide viii
  • Cisco 2432 | Hardware Installation Guide - Page 9
    that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U BEWAHREN SIE DIESE SICHERHEITSANWEISUNGEN AUF OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide ix
  • Cisco 2432 | Hardware Installation Guide - Page 10
    olyckor. Se översättningarna av de varningsmeddelanden som finns i denna publikation, och se de översatta säkerhetsvarningarna som medföljer denna anordning. OBS! SPARA DESSA ANVISNINGAR Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide x OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 11
    Preface Safety Warnings OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide xi
  • Cisco 2432 | Hardware Installation Guide - Page 12
    elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradu fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide xii OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 13
    Preface Safety Warnings OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide xiii
  • Cisco 2432 | Hardware Installation Guide - Page 14
    to install, replace, or service this equipment. Statement 1030 Warning Do not use this product near water; for Cisco IAD2435 series IAD is located on the bottom of the chassis, near the compliance label. (See Figure 0-2.) Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 15
    . For a complete list of guidelines and Cisco products' adherence to accessibility, see Cisco Accessibility Products at the following URL: http://www.cisco.com/web/about/responsibility/accessibility/products OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide xv
  • Cisco 2432 | Hardware Installation Guide - Page 16
    as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide xvi OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 17
    Interfaces and Service Capabilities, page 1-11 • Deployment Options, page 1-13 Overview The Cisco IAD2430 series IADs aggregate support Media Gateway Control Protocol (MGCP), the signaling protocol H.323, and Session Initiation Protocol (SIP). The Cisco IAD2430, Cisco IAD2431, and Cisco IAD2432
  • Cisco 2432 | Hardware Installation Guide - Page 18
    A restricted access area can be accessed only through the use of a special tool, lock and key, or other means by security. Statement 1017 Warning No user-serviceable parts inside. Do not open. Statement 1073 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 1-2 OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 19
    according to all national laws and regulations. Statement 1040 Cisco IAD2430-24FXS IAD The Cisco IAD2430-24FXS IAD provides 24 analog foreign exchange station (FXS) ports with memory • AC and DC power inputs OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 1-3
  • Cisco 2432 | Hardware Installation Guide - Page 20
    -8FXS Chassis Chapter 1 Overview of Cisco IAD2430 Series IADs 88825 IAD2431-8FXS Cisco IAD2431-16FXS The Cisco IAD2431-16FXS IAD (Figure 1-5) provides sixteen analog FXS memory • AC and DC power inputs Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 1-4 OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 21
    1 Overview of Cisco IAD2430 Series IADs Figure 1-6 Cisco IAD2431-1T1E1 Chassis Overview IAD2431-1T1E1 88827 Cisco IAD2432-24FXS IAD The Cisco IAD2432-24FXS IAD (Figure 1-7) provides and DC power inputs OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 1-5
  • Cisco 2432 | Hardware Installation Guide - Page 22
    IAD243x chassis. All interface slots are on the back of the chassis. Figure 1-9 Cisco IAD2430 Series IAD Back Panel Function Options 1 2 34 6 5 7 8 9 11 12 10 . You must use either DC or AC. 88828 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 1-6 OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 23
    series IADs. Figure 1-11 shows LEDs for the Cisco IAD2430 series IADs. The LEDs for the Cisco IAD2435 series IADs are located on the front of the chassis. Figure 1-12 shows LEDs for the Cisco IAD2435 series IADs. OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 24
    LEDs Chapter 1 Overview of Cisco IAD2430 Series IADs Figure 1-11 Cisco IAD2400 Series LEDs (Cisco 2432-24FXS shown) 95007 1 2 3 4 No LED/ (off hook) or when one of the analog ports is in use Green when accessing IAD Green when accessing read or write function Indicates link activity 100BASE-T
  • Cisco 2432 | Hardware Installation Guide - Page 25
    power cable, which uses a standard grounding plug Cisco IAD2430 series IADs is 128 MB. Onboard CPU memory is 256 MB. Port Numbering Conventions Port numbering conventions for Cisco IAD2430, IAD2431, and IAD2432 series IADs Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 1-9
  • Cisco 2432 | Hardware Installation Guide - Page 26
    Network-Enabled Auto-Provision (SNAP) option, or you can configure theCisco IAD2430 series IAD manually using several methods listed in "Manual Configuration" section on page 1-11. Automated Configuration If your Cisco IAD2430 series IAD was ordered with the SNAP option, no on-site configuration is
  • Cisco 2432 | Hardware Installation Guide - Page 27
    to communicate, use the procedures in the Cisco IAD2430 Series Software Configuration Guide to configure the specific services and functions, or to make changes to the existing configuration. You can use any of several manual methods for configuring a Cisco IAD2430 series IAD: • System configuration
  • Cisco 2432 | Hardware Installation Guide - Page 28
    Chapter 1 Overview of Cisco IAD2430 Series IADs Table 1-1 Cisco IAD2430 Series Interfaces and Service Capabilities Port Console port 0/0 Interface Configurations Interface To EIA/TIA-232 asynchronous ASCII terminal serial (DCE) Personal computer Services Supported Local administrative access
  • Cisco 2432 | Hardware Installation Guide - Page 29
    following interface options are available in Cisco IAD2430 series IADs: Table 1-2 Configuration Options Cisco IAD2430 Series RJ-211 T1/E12 FE3 IAD2430-24FXS Yes None 2 IAD2431-8FXS Yes 1 1 IAD2431-16FXS Yes 1 2 IAD2431-1T1E1 No 2 2 IAD2432-24FXS Yes 2 2 IAD2435-8FXS Yes
  • Cisco 2432 | Hardware Installation Guide - Page 30
    ports Cisco IAD model number: Cisco IAD2432-24FXS with Cisco VIC2-4FXO interface card PBX 4 FXO voice ports Distribution panel PBX 88996 Figure 1-16 T1/E1 with T1/E1 Interface to PBX Ethernet WAN T1 IAD Cisco IAD model number: IAD2431-1T1E1 T1 PBX 88995 1-14 Cisco IAD2430 Series
  • Cisco 2432 | Hardware Installation Guide - Page 31
    room temperature should be maintained at from 32 to 122°F (0 to 50°C). Note The Cisco IAD2430, IAD2431, and IAD2432 series IAD chassis is designed for front-to-back airflow. Rack-Mounted Installation If the Cisco IAD is installed in an enclosed rack with a ventilation fan at the top, make sure that
  • Cisco 2432 | Hardware Installation Guide - Page 32
    , and troubleshooting. Chassis Grounding Chassis grounding is provided through the power cable, which uses a standard using the earth ground lug and hardware provided. For more information, see the "Installing the Ground Connection" section on page 3-14. Power Source A Cisco IAD2430 series IADs
  • Cisco 2432 | Hardware Installation Guide - Page 33
    Types The cable types that you use depends on which Cisco 2430 series IAD you are using. For more information see the "Interfaces and Service Capabilities" section on page 1-11. /TIA-530/EIA/TIA-530A (DCE/DTE) OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 2-3
  • Cisco 2432 | Hardware Installation Guide - Page 34
    Electronic Industries Association (EIA). Distance limitation information is included for the following IAD ports: • Fast Ethernet Maximum Distance, page 2-4 • T1/E1-WAN 200 100 50 Distance (Meters) 60 30 15 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 2-4 OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 35
    often used at greater distances than specified in Table 2-2 on page 2-4. If you understand the electrical problems 31 15 Caution The EIA/TIA-449 and V.35 interfaces support data rates up to 2.048 megabits per second (Mb Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 2-5
  • Cisco 2432 | Hardware Installation Guide - Page 36
    EIA/TIA-232 drivers and receivers in the Cisco IAD. If you use twisted-pair cables with a good distribution of potentially catastrophic problems just described. Take precautions to avoid these problems by providing (RFI). Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 2-6
  • Cisco 2432 | Hardware Installation Guide - Page 37
    your Cisco IAD2430 series integrated access device (IAD) and service this equipment. Statement 1030 Warning Read the installation instructions before connecting the system to the power source. Statement 1004 OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 38
    Cisco IAD2430 Series IADs must be installed and maintained by service personnel as defined by AS/NZS open, or both. Statement 1043 Safety Tips Use these tips as safety guidelines when installing or working Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-2 OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 39
    , and procedures performed - Comments, notes, and problems - Changes and updates to the Cisco IOS software Keeping Track-Checklist We recommend that you use an installation checklist and maintain a Site Log. OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-3
  • Cisco 2432 | Hardware Installation Guide - Page 40
    following tools and parts needed for installing a Cisco IAD2430 series IAD: • Standard flat-blade screwdriver as required (use the screw size required by the rack). • Screws and anchors for wall mounting, if required. Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-4
  • Cisco 2432 | Hardware Installation Guide - Page 41
    Serial cables use the Cisco 12-in-1 connector on the WAN connection end. Unpacking and Inspection Do not unpack the Cisco IAD2430 series IAD until you are the Cisco IAD2435-8FXS. • Grounding lug and fasteners OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-5
  • Cisco 2432 | Hardware Installation Guide - Page 42
    Rack-Mounting the Chassis Chapter 3 Installing Cisco IAD2430 Series IADs Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when installing or configuring your system, contact a customer service representative. (See the "Obtaining Documentation and
  • Cisco 2432 | Hardware Installation Guide - Page 43
    Cisco IAD2430 Series IADs Rack-Mounting the Chassis Mounting Screws Two sets of mounting screws are provided, in separate packages (Mounting screws are not included with the Cisco IAD2435 IAD chassis). Take care to use Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-7
  • Cisco 2432 | Hardware Installation Guide - Page 44
    Cisco IAD2430 Series IADs in a Rack The following warning applies only when the unit is rack-mounted: Warning To prevent bodily injury when mounting or servicing mounting brackets to the chassis, as shown. Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-8 OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 45
    instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 248 Wall-Mounting the Cisco IAD2430, Cisco IAD2431, and Cisco IAD2432 IADs Caution
  • Cisco 2432 | Hardware Installation Guide - Page 46
    Wall-Mounting the Chassis Chapter 3 Installing Cisco IAD2430 Series IADs Caution Be sure to use the correct screws and plastic washers for this mounting option. (See Table 3-1 on page 3-7.) Figure 3-9 Attaching the Brackets for Wall-Mounting 88843 Step 2 Step 3 Attach
  • Cisco 2432 | Hardware Installation Guide - Page 47
    Cisco IAD2430 Series IADs Figure 3-10 Wall-Mounting the Chassis 1 2 3 4 Wall-Mounting the Chassis CISCO IAD2400 103517 1 Wall 3 Wall stud 2 Bracket 4 Keyhole for starter screw Wall-Mounting the Cisco IAD2435 IADs You can mount the router on a wall or other vertical surface by using
  • Cisco 2432 | Hardware Installation Guide - Page 48
    Cisco IAD2430 Series IADs Caution If you are mounting the router on drywall, use Because you will use the LEDs as status and problem indicators, the LEDs the power supply is not supported, it could place strain on Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 49
    external the external 60-W power supply adapter 60-W power supply adapter (6 ft [1.8 m]) 7 Distance between the screw and the wall (1/8 in. [0.32 cm]) OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-13
  • Cisco 2432 | Hardware Installation Guide - Page 50
    satisfies this requirement. Statement 284 Warning This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect the host to earth ground during normal use. Statement 242 3-14 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 51
    and a metal water pipe • Between the Cisco IAD chassis and the ground of a power tap • Between the Cisco IAD chassis and the ground of a junction box using a crimp tool of the appropriate size. (See Figure 3-13.) OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 52
    Ground Connection Using Ground Lug 88844 Ground lug Figure 3-15 Ground Lug Location on the Cisco IAD2435 IAD FXS IAD2435-8FXS WAN FastEthernet CONSOLE T1/E1 0/1 0/0 AUX 12V DC SA 1 1 Grounding lug 3-16 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL
  • Cisco 2432 | Hardware Installation Guide - Page 53
    and does not support interface cards. The following WICs and VICs (also used by the Cisco 2600 series and Cisco 3600 series routers) are supported in releases of the Cisco IAD2430 series IADs: • WIC- 1044 OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-17
  • Cisco 2432 | Hardware Installation Guide - Page 54
    IAD2430 Series IADs Note Contact your Cisco account representative for the most recent, supported cards. For detailed information on installing and connecting interface cards, see "Installing WAN and Voice Interface Cards in Cisco Modular Routers," in the Cisco Interface Cards Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 55
    Chapter 3 Installing Cisco IAD2430 Series IADs Connecting Cables to, or not shielded from, the off-premise wiring or power cables RJ-45-to-DB-25 auxiliary cable (included) Grounding power cord (included)1 OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-19
  • Cisco 2432 | Hardware Installation Guide - Page 56
    cable Figure 3-18 LAN, Administrative Access, and Connections (Cisco IAD2435 IAD) FXS 3 IAD2435-8FXS WAN FastEthernet CONSOLE T1/E1 0/1 0/0 1 AUX 12V DC SA 2 4 Ethernet hub PC 232070 3-20 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 57
    Cisco IAD, use the procedure in this section. Caution The Cisco IAD2430 series chassis provides inputs for both AC and DC power. Design your installation to use only one type of power. Do not use 3-19. OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-21
  • Cisco 2432 | Hardware Installation Guide - Page 58
    the cable between the Cisco IAD console port and the serial port on the PC or ASCII terminal. Configure the terminal emulation software requirements: • 9600 baud • 8 data bits • 1 stop bit • no parity 3-22 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 59
    Cisco IAD2430 Series IADs • no flow control Connecting Cables Connecting the Auxiliary Port to a Modem To connect the auxiliary port to a modem, use the procedure in this section. Cable Use two ports. OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-23
  • Cisco 2432 | Hardware Installation Guide - Page 60
    Connecting Cables Chapter 3 Installing Cisco IAD2430 Series IADs WAN and Voice Cables Warning For connections outside the building included) RJ-48 T1/E1 cable (not included) RJ-11 cable (not included) 3-24 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 61
    Chapter 3 Installing Cisco IAD2430 Series IADs Figure 3-20 WAN and Voice Connections Distribution panel 1 Connecting Cables To CO 2 Cisco IAD2430 series 95092 3 Network demarcation 1 RJ-21 cable 3 RJ-48 straight-through cable 2 RJ-45 cable (through a patch panel) to central office (CO)
  • Cisco 2432 | Hardware Installation Guide - Page 62
    the Cisco IAD2435 IAD FXS IAD2435-8FXS WAN FastEthernet T1/E1 0/1 0/0 281201 Step 3 Use a number 2 (flat or Phillips screwdriver) to attach the captive screws on the RJ-21 male connector (see Figure 3-24). 3-26 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234
  • Cisco 2432 | Hardware Installation Guide - Page 63
    . The serial port (S0) can operate as follows: • DTE or DCE with the following signaling: - EIA/TIA-232 - EIA-TIA-449 - V.35 OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-27
  • Cisco 2432 | Hardware Installation Guide - Page 64
    signaling standard. Procedure Use the procedure in this section to connect external equipment to the Cisco 2430 series IAD. Step 1 Connect use RJ-45 connectors. Use caution when connecting cables. Statement 1021 3-28 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL
  • Cisco 2432 | Hardware Installation Guide - Page 65
    /DSU for connecting to a service provider's network interface. Cable Procedure Use an RJ-48 T1/E1 use the procedure in this section. Cable Use an RJ-21 cable with Amphenol 50-pin connectors (not included). OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 66
    Installing Cisco IAD2430 Series IADs Warning use the procedure in this section. Cable Use an RJ-48 T1/E1 cable (not included). Procedure Step 1 Connect the RJ-48 T1/E1 cable to the T1/E1 port. See Figure 3-29. 3-30 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 67
    Remote Terminal Connections (If Applicable) If you are configuring a Cisco IAD from a remote location, connect the modem and the remote PC or terminal to the telephone network as described in this section. OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-31
  • Cisco 2432 | Hardware Installation Guide - Page 68
    • 8 data bits • 1 stop bit • no parity • no flow control Key in the telephone number of the Cisco IAD external modem, or, if you are using a Hayes-compatible modem, enter ATDT and the number to be dialed. 3-32 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 69
    UPS to an AC-Powered Cisco IAD2430 Series IAD" section on page 3-34 for connection instructions. Note UPS functionality is not available on the IAD2435 IAD. Caution The Cisco IAD2430 series IAD chassis provides inputs for both AC and DC power. Design your installation to use only one type of power
  • Cisco 2432 | Hardware Installation Guide - Page 70
    -Powered Cisco IAD2430 Series IAD Connect an uninterruptible power supply (UPS) to the AC input on your Cisco IAD2430 series IAD. Before you install a UPS, be sure to read the installation instructions for the UPS. 3-34 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL
  • Cisco 2432 | Hardware Installation Guide - Page 71
    setup; please review your UPS documentation before you set up your system. Figure 3-32 Connecting a UPS to an AC-Powered Cisco IAD AC wall plug UPS Cisco IAD 2430 series IAD2431-8FXS AC plug 95251 OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 3-35
  • Cisco 2432 | Hardware Installation Guide - Page 72
    Connecting Backup Power Chapter 3 Installing Cisco IAD2430 Series IADs 3-36 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234-06
  • Cisco 2432 | Hardware Installation Guide - Page 73
    Troubleshooting, page 4-9 Checklist for Power-On You can power on a Cisco IAD if it meets the requirements described in Chapter 3, "Installing Cisco IAD2430 Series IADs flow control. Move the Cisco IAD power switch to the ON position (Cisco IAD2430 through Cisco IAD2432 IADs only). The green LED
  • Cisco 2432 | Hardware Installation Guide - Page 74
    Cisco IOS Configuration Fundamentals Configuration Guide for your Cisco IOS software release. Initial Configuration Procedures This section describes how to prepare the Cisco IAD2430 IAD series IAD to perform basic communication functions. You may initially configure your router by using the Cisco
  • Cisco 2432 | Hardware Installation Guide - Page 75
    Chapter 4 Powering On Cisco IAD2430 Series IADs Initial Configuration Procedures Cisco IOS CLI To configure the initial router settings using the Cisco IOS CLI, follow these steps: Step 1 Set up a console connection to your router. The following message is displayed: ... router con0 is now
  • Cisco 2432 | Hardware Installation Guide - Page 76
    Configuration Procedures Chapter 4 Powering On Cisco IAD2430 Series IADs Setup Command Facility The setup command facility guides you through the configuration process by prompting you for the specific information that is needed to configure your system. Use the setup command facility to configure
  • Cisco 2432 | Hardware Installation Guide - Page 77
    4 Powering On Cisco IAD2430 Series IADs Initial Configuration Procedures and can be seen when viewing the configuration. The enable password is used when you do not specify an enable secret password, with some -4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 4-5
  • Cisco 2432 | Hardware Installation Guide - Page 78
    Manual Configuration To configure the Cisco IAD from a console (locally or remotely), see the Cisco IAD2430 Series Software Configuration Guide for the configuration instructions and Submitting a Service Request" section on page xvi. This section shows how to prepare the Cisco IAD to perform basic
  • Cisco 2432 | Hardware Installation Guide - Page 79
    remote access to the Cisco IAD. Returns to privileged EXEC mode. Saves the configuration. Configuring a T1/E1 Port for a WAN Connection The T1/E1 port supports balanced T1/E1 according The default is ami. OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide 4-7
  • Cisco 2432 | Hardware Installation Guide - Page 80
    to support PPP Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide. Verifying and Saving Your Configuration To verify the configuration and save it in NVRAM so that the configuration remains in effect if the Cisco IAD is restarted, enter the following commands: Cisco IAD2430
  • Cisco 2432 | Hardware Installation Guide - Page 81
    Chapter 4 Powering On Cisco IAD2430 Series IADs Troubleshooting Step 1 Command Router# show running-config Step 2 Router# show specific problems and solutions. For problems with the configuration, see the Cisco IAD2430 Series Software Configuration Guide at the following URL: http://www.cisco.com
  • Cisco 2432 | Hardware Installation Guide - Page 82
    error Faulty Cisco IAD Reset/replace console. Repeat power-on procedure. Contact Cisco1 or your Cisco reseller. 1. See the "Obtaining Documentation and Submitting a Service Request" section on page xvi. 4-10 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide OL-4234
  • Cisco 2432 | Hardware Installation Guide - Page 83
    and table mounting 3-14 checklist, installation 3-4 Cisco IAD2430-24FXS Chassis 1-3 Cisco IAD2431-16FXS chassis 1-4, 1-5, 1-6 Cisco IAD2431-1T1E1 chassis 1-5 Cisco IAD2431-8FXS chassis 1-4 Cisco IAD2432-24FXS chassis 1-5, 1-6 Cisco IOS software 1-10 Cisco IOS software documentation iii-xvi clocking
  • Cisco 2432 | Hardware Installation Guide - Page 84
    19-Inch Rack-Rear Panel Forward 3-9 Attaching the Wall-Mount Brackets 3-10 Cisco IAD2430-24FXS Chassis 1-3 Cisco IAD2431-16FXS Chassis 1-4, 1-5, 1-6 Cisco IAD2431-1T1E1 Chassis 1-5 Cisco IAD2431-8FXS Chassis 1-4 Cisco IAD2432-24FXS Chassis 1-5, 1-6 Crimping the Ground Lug onto the Ground Wire 3-16
  • Cisco 2432 | Hardware Installation Guide - Page 85
    Troubleshooting the Cisco IAD instruction 2-3 SELV-to-TNV connection hazard 3-28 WAN port hazardous voltages 3-29 working during lightning activity 3-18 warnings, safety iii-viii X X.21 distance limitations 2-5 OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
  • Cisco 2432 | Hardware Installation Guide - Page 86
    OL-4234-06 Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide IN-4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco IAD2430 Series Integrated Access
Devices Hardware Installation Guide
Text Part Number: OL-4234-06