Cisco AIR-ANT2012 User Guide
Cisco AIR-ANT2012 Manual
 |
View all Cisco AIR-ANT2012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco AIR-ANT2012 manual content summary:
- Cisco AIR-ANT2012 | User Guide - Page 1
such as heating and air-conditioning ducts, large ceiling trusses, building superstructures, and major power cabling runs. If necessary, use a rigid conduit to lower the antenna away from these obstructions. 78-13212-01 Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall - Cisco AIR-ANT2012 | User Guide - Page 2
Installation Notes Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna • The density of the materials used in a building's construction determines the number of walls the signal must pass through and still maintain adequate coverage. Consider the following before - Cisco AIR-ANT2012 | User Guide - Page 3
contain procedures for installing the antenna. Choose the procedure that applies to your situation. Use figure 1 as a guide. Figure 1 Mounting Details 78-13212-01 Antenna leads may optionally be orientated upward Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount - Cisco AIR-ANT2012 | User Guide - Page 4
Installation Instructions Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna Hard Surfaces The antenna can be easily mounted to hard surfaces, such as wood or metal, which supports the antenna. After choosing a suitable location, follow these steps: Step 1 Step - Cisco AIR-ANT2012 | User Guide - Page 5
for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna Mounting Template 6-1/8" Installation Instructions 4-1/4" 60285 Optionally, antenna leads may be positioned upward as required by unit location. 78-13212-01 Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity - Cisco AIR-ANT2012 | User Guide - Page 6
respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0104R) Copyright © 2001, Cisco Systems, Inc. All rights reserved. Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna 6 78-13212-01
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
1
Mounting Instructions for the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount Antenna
78-13212-01
Mounting Instructions for the Cisco Aironet
6.5 dBi Diversity Patch Wall Mount Antenna
May 21, 2001
This document provides instructions for mounting the Cisco Aironet 6.5 dBi Diversity Patch Wall Mount
Antenna (Cisco Aironet part number AIR-ANT2012).
Contents
Installation Guidelines, page 1
Installation Notes, page 2
Safety Instructions, page 2
Installation Instructions, page 3
Mounting Template, page 5
Installation Guidelines
Because the antenna transmits and receives radio signals, they are susceptible to RF obstructions and
common sources of interference that can reduce throughput and range of the device to which they are
connected. Follow these guidelines to ensure the best possible performance:
•
Mount the antenna to utilize its propagation characteristics. One way to do this is to orient the
antenna vertically and mount it as high as possible.
Note
This antenna must be mounted vertically in order to maximize its directional propagation
characteristics. Mounting it horizontally may noticeably decrease the antenna’s range and overall
performance.
•
Keep the antenna away from metal obstructions such as heating and air-conditioning ducts, large
ceiling trusses, building superstructures, and major power cabling runs. If necessary, use a rigid
conduit to lower the antenna away from these obstructions.