Cisco AIR-ANT2410Y-R User Guide

Cisco AIR-ANT2410Y-R Manual

Get Cisco AIR-ANT2410Y-R PDF manuals and user guides View all Cisco AIR-ANT2410Y-R manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco AIR-ANT2410Y-R manual content summary:

  • Cisco AIR-ANT2410Y-R | User Guide - Page 1
    Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) This document describes the AIR-ANT2410Y-R 10-dBi Yagi antenna and provides instructions for mounting it. The antenna operates in the 2.4- to 2.48-GHz frequency range and is designed for use as an access point or bridge antenna. The antenna is an
  • Cisco AIR-ANT2410Y-R | User Guide - Page 2
    91 m) low loss RG-58 Connector type RP-TNC Mounting options Mast or wall mount Operating temperature 140° F to -40° F (60° C to -40° C) Wind rating 125 MPH (201.2 KMPH) Azimuth Radiation Pattern Elevation Radiation Pattern Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 2 78-16122-01
  • Cisco AIR-ANT2410Y-R | User Guide - Page 3
    Cisco sales representative can explain which mounting method to use for the size and type antenna you are about to install. 2. Select your installation instructions and watch for signs of trouble. 5. When installing your antenna antenna, mast, cable, Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 3
  • Cisco AIR-ANT2410Y-R | User Guide - Page 4
    wall. Make sure your drilling location is clear of any obstructions or other hazards. Step 5 Pull the cable through the hole and form a drip loop close to where it enters the building. Step 6 Thoroughly waterproof the lead-in area. Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 4 78-16122-01
  • Cisco AIR-ANT2410Y-R | User Guide - Page 5
    mm) wrench or suitable adjustable wrench • A 5/16-in. (8 mm) hex allen wrench (if you need to change the antenna polarity) • A small standard screw driver (if you need to change the antenna polarity) • Cable ties and electrical tape 78-16122-01 Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 5
  • Cisco AIR-ANT2410Y-R | User Guide - Page 6
    antenna should be mounted on a mast. Figure 1 Antenna Mounting Details 1 Horizontal polarization arrow 2 Vertical polarization arrow 3 U-bolt 4 V-block Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 6 5 Spring lock washers, flat washer, and hex nuts 6 Antenna mounting plate 7 Coaxial cable
  • Cisco AIR-ANT2410Y-R | User Guide - Page 7
    side. Note The antenna ships in the vertical polarization mode. but you can mount it in the horizontal polarization mode. See the "Changing the Polarization" section on page 8 for instructions. Step 4 tape with electrical tape. 78-16122-01 Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 7
  • Cisco AIR-ANT2410Y-R | User Guide - Page 8
    .) to mount the spacer to the wall surface. Step 3 Step 4 Position the mounting plate on the wall or intermediate spacer and use it as a template to locate and mark the antenna mounting holes. Drill four holes at the locations you marked. Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 8 78
  • Cisco AIR-ANT2410Y-R | User Guide - Page 9
    publication. These translated safety warnings apply to other documents in which they appear in English. The following safety warnings appear in this section: • Statement 332-Antenna Installation Warning 78-16122-01 Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 9
  • Cisco AIR-ANT2410Y-R | User Guide - Page 10
    New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0. Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 10 78
  • Cisco AIR-ANT2410Y-R | User Guide - Page 11
    found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R) 78-16122-01 Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 11
  • Cisco AIR-ANT2410Y-R | User Guide - Page 12
    Cisco Aironet 10-dBi Yagi Antenna (AIR-ANT2410Y-R) 12 78-16122-01
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Corporate Headquarters:
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706
USA
Cisco Aironet 10-dBi Yagi Antenna
(AIR-ANT2410Y-R)
This document describes the AIR-ANT2410Y-R 10-dBi Yagi antenna and provides instructions for
mounting it. The antenna operates in the 2.4- to 2.48-GHz frequency range and is designed for use as an
access point or bridge antenna. The antenna is an enclosed 6-element, vertically polarized directional
Yagi and is designed to be mounted indoors or outdoors on a mast or flat vertical surface.
The following information is provided in this document.
•
Technical Specifications, page 2
•
Safety Precautions, page 3
•
Installation Notes, page 4
•
Translated Safety Warnings, page 9
•
Obtaining Documentation and Submitting a Service Request, page 10