Cisco AIR-PCM352 Configuration Guide

Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Manual

Get Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter PDF manuals and user guides
UPC - 746320504872
View all Cisco AIR-PCM352 manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco AIR-PCM352 manual content summary:

  • Cisco AIR-PCM352 | Configuration Guide - Page 1
    Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE Software Release 2.50 March 2004 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408
  • Cisco AIR-PCM352 | Configuration Guide - Page 2
    not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Cisco and any other company. (0402R) Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE Copyright © 2003-2004 Cisco Systems
  • Cisco AIR-PCM352 | Configuration Guide - Page 3
    1-3 Radio Antenna 1-3 LEDs 1-3 Software Components 1-4 Radio Firmware 1-4 Driver 1-4 Client Utilities 1-4 Overview of ACU 1-5 Buttons on the Client Utility Screens 1-6 CONTENTS OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE iii
  • Cisco AIR-PCM352 | Configuration Guide - Page 4
    of Security Features 5-11 Static WEP Keys 5-11 Dynamic WEP Keys with EAP 5-11 Fast Roaming (CCKM) 5-14 Reporting Access Points that Fail LEAP or EAP-FAST Authentication 5-14 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE iv OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 5
    PAC File (Manual PAC Provisioning Windows NT or 2000 Domain Databases Only) 6-8 Performing Diagnostics 7-1 Overview of ACU Diagnostic Tools 7-2 Setting Signal Strength Display Units 7-2 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 6
    Passwords 9-4 Error Messages 9-5 General Error Messages 9-5 Installation Error Messages 9-7 LEAP Authentication Error Messages 9-8 EAP-FAST Authentication Error Messages 9-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE vi OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 7
    RF Exposure C-5 Guidelines for Operating Cisco Aironet Wireless LAN Client Adapters in Japan C-6 Japanese Translation C-6 English Translation C-6 Administrative Rules for Cisco Aironet Wireless LAN Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 8
    an Access Point Using Windows CE .NET E-10 Performing a Site Survey F-1 Overview F-2 Guidelines F-2 Additional Information F-2 Setting Signal Strength Display Units F-3 Using Passive Mode F-4 Using Active Mode F-6 Forcing the Client Adapter to Reassociate F-12 Cisco Aironet 350 Series Wireless LAN
  • Cisco AIR-PCM352 | Configuration Guide - Page 9
    Preface The preface provides an overview of the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE, references related publications, and explains how to obtain other documentation and technical assistance, if necessary. The following topics are
  • Cisco AIR-PCM352 | Configuration Guide - Page 10
    describes the Cisco Aironet client adapters in the 350 series and explains how to install, configure, and troubleshoot them. Note This version of the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE pertains specifically to client adapter driver and
  • Cisco AIR-PCM352 | Configuration Guide - Page 11
    IEEE 802.11b channels supported by the world's wireless network. Conventions This publication uses the following conventions to convey instructions not contained in this manual. Caution Means reader Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 12
    förfarande för att förebygga skador. (Se förklaringar av de varningar som förekommer i denna publikation i appendix "Translated Safety Warnings" [Översatta säkerhetsvarningar].) Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE xii OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 13
    For more information about Cisco Aironet Wireless LAN Client Adapters for Windows CE, refer to the following publications: • Release Notes for Cisco Aironet Client Utilities 2.50 and Driver 2.50 for Windows CE • Release Notes for Cisco Aironet 350 and CB20A Client Adapter Firmware 5.40.10 For more
  • Cisco AIR-PCM352 | Configuration Guide - Page 14
    configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE xiv
  • Cisco AIR-PCM352 | Configuration Guide - Page 15
    login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register: http://tools.cisco.com/RPF/register/register.do OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE xv
  • Cisco AIR-PCM352 | Configuration Guide - Page 16
    world-class networking training, with current offerings in network training listed at this URL: http://www.cisco.com/en/US/learning/le31/learning_recommended_training_list.html Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE xvi OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 17
    : • Introduction to the Client Adapters, page 1-2 • Hardware Components, page 1-3 • Software Components, page 1-4 • Network Configurations Using the Client Adapter, page 1-6 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 18
    client adapters to a wired LAN, such as an access point, bridge, or base station. Throughout this document, access point is used to represent infrastructure devices in general. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 19
    in ad hoc (or peer-to-peer) mode or with Cisco Aironet 340, 350, 1100, and 1200 Series Access Points (with a 2.4-GHz radio) and other IEEE 80211b-compliant the LED codes. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 20
    client adapter. Note All of the screens included in this manual were taken from a PPC 2002 or PPC 2003 device. The screens look slightly different on other Windows CE devices. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 21
    the current state of your client adapter. The following states are possible: Not Associated, Associated, Authenticated, Ad Hoc Mode, and Cisco Wireless LAN Adapter Not Found. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 22
    and access points, refer to the hardware installation guide for your access point. Note Refer to Chapter 5 for information on setting the client adapter's network (or infrastructure) mode. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 23
    be linked together and communicate directly with each other. The use of an infrastructure device, such as an access point, is not required. Figure 1-2 Ad Hoc Wireless LAN 47520 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 24
    to as seamless roaming. Figure 1-3 Wireless Infrastructure with Workstations Accessing a Wired LAN Access Point (Root Unit) Wired LAN Access Point (Root Unit) 45835 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 1-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 25
    topics are covered in this chapter: • Safety Information, page 2-2 • Unpacking the Client Adapter, page 2-3 • System Requirements, page 2-4 • Site Requirements, page 2-5 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 2-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 26
    devices on airplanes is governed by the Federal Aviation Administration (FAA). - The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 2-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 27
    with FCC radio frequency (RF) exposure limits, dipole Guide: Cisco Aironet Wireless LAN Client Adapters • Cisco Aironet Wireless LAN Client Adapters CD • Cisco product registration card OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 28
    350 Series Wireless LAN Client Adapter (PC card or LM card) Note Client adapter driver and utility version 2.50 is not supported for use with Cisco Aironet 340 series client adapters. • Client adapter firmware version 5.40.10 or later (recommended) • Laptop or PC running a Windows operating system
  • Cisco AIR-PCM352 | Configuration Guide - Page 29
    wireless infrastructure devices (such as access points, bridges, and base stations, which connect your client adapters to a wired LAN it is susceptible to RF obstructions and common sources Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 2-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 30
    Site Requirements Chapter 2 Preparing for Installation Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 2-6 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 31
    3-2 • Installing the Driver and Client Utilities, page 3-2 • Verifying Installation, page 3-5 • Deciding How to Configure Your Client Adapter (Windows CE .NET Only), page 3-6 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 32
    not supported for use with Cisco Aironet 340 series client adapters. Note The driver and client utilities must be installed before you insert a client adapter into a Windows CE device. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-2 OL
  • Cisco AIR-PCM352 | Configuration Guide - Page 33
    of the extracted files together in one folder. Moving them to different locations may prevent the software from operating correctly. Step 13 Double-click the ceInstall.exe file. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 34
    2002 device and you installed the 802.1X backport, reset your Windows CE device now. (You should have been notified earlier that a reset would be required after installation.) Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 35
    is running Windows CE .NET. If your device is running Windows CE .NET, go to the "Deciding How to Configure Your Client Adapter (Windows CE .NET Only)" section on page 3-6. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 36
    b. Uncheck the Use Windows to configure my wireless network settings check box. c. Follow the instructions in Chapter 4 and Chapter 5 to configure your client adapter through ACU. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-6 OL-1375
  • Cisco AIR-PCM352 | Configuration Guide - Page 37
    want to use ACU's diagnostic tools, go to Appendix E to configure the adapter through Windows CE .NET; then follow the instructions in Chapter 7 to use ACU's diagnostic tools. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 38
    Deciding How to Configure Your Client Adapter (Windows CE .NET Only) Chapter 3 Installing the Client Adapter Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 3-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 39
    of Profile Manager, page 4-2 • Opening Profile Manager, page 4-2 • Creating a New Profile, page 4-3 • Selecting the Active Profile, page 4-3 • Modifying a Profile, page 4-4 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 4-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 40
    , page 4-3 • Edit a profile, page 4-4 • Rename a profile, page 4-4 • Delete a profile, page 4-5 Follow the instructions on the page indicated for the task you want to perform. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 4-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 41
    configure your card through the operating system but use ACU's diagnostic tools. Refer to Appendix E for information on configuring your client adapter through Windows CE .NET. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 4-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 42
    completely displayed. Step 4 Tap on a blank part of the screen to save your change. The profile is renamed and added to the list of profiles. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 4-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 43
    active profile. Step 3 Step 4 Tap the Delete button. When prompted to confirm your decision, tap Yes. The profile is deleted. Modifying a Profile OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 4-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 44
    Modifying a Profile Chapter 4 Using the Profile Manager Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 4-6 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 45
    5-20 • Enabling EAP-FAST, page 5-21 • Enabling Host-Based EAP, page 5-25 • Disabling LEAP, EAP-FAST, or Host-Based EAP, page 5-31 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 46
    that profile. Follow these steps to access the Properties screen and complete the client adapter's configuration parameters. Follow the instructions in the table to initially set or Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-2 OL-
  • Cisco AIR-PCM352 | Configuration Guide - Page 47
    access point management system). If the access point wireless network consists of a few wireless devices that are not connected to a wired Ethernet network through an access point. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 48
    Max PSP. Causes the access point to buffer incoming messages for the client adapter, which wakes up periodically and polls the access point to see if any battery-powered devices). Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-4 OL-1375-
  • Cisco AIR-PCM352 | Configuration Guide - Page 49
    reasons, Cisco recommends that WEP-enabled and WEP-disabled clients not be allowed in the same cell because broadcast packets are sent unencrypted, even to clients running WEP. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 50
    of the access point (in infrastructure mode) or the other clients (in ad hoc mode) with which it is to communicate. Otherwise, your client adapter may not be able to associate to them. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-6 OL
  • Cisco AIR-PCM352 | Configuration Guide - Page 51
    Causes the client adapter to periodically scan for a better access point with the same SSID if the signal strength falls below 50%. Options: Enabled or Disabled Default: Enabled OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 52
    , you set the Network Security Type to Host Based EAP, you must set the WEP parameter to Dynamic WEP Keys. Note Go to Step 3 for instructions on setting dynamic WEP keys. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 53
    type for which your operating system has support (such as EAP-TLS or PEAP). Note Go to Step 3 for instructions on enabling host-based EAP instructions on entering the LEAP or EAP-FAST domain name. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 54
    you have made. If the profile you just edited is the active profile and your client adapter is inserted, the changes are applied immediately. 5-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 55
    a wireless client and an authentication server, such as a Remote Authentication Dial-In User Service (RADIUS) server, to which the access point communicates over the wired network. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 56
    type for which your Windows CE device has support, such as EAP-TLS or PEAP. You can select this option only on PPC 2002 devices with the 802.1X backport installed. 5-12 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 57
    Refer to one of these sections for instructions on enabling EAP authentication: • Enabling LEAP, page 5-20 • Enabling EAP-FAST, page 5-21 • Enabling Host-Based EAP, page 5-25 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-13
  • Cisco AIR-PCM352 | Configuration Guide - Page 58
    server. 3. The client records the MAC address for access point A and the reason why the association failed. 4. The client associates successfully to access point B. 5-14 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 59
    -proof. The ACU Status screen indicates if MIC is supported by the client adapter's driver and is enabled on the access point. See Figure 5-2. Figure 5-2 ACU Status Screen OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-15
  • Cisco AIR-PCM352 | Configuration Guide - Page 60
    WEP keys. Note If you enable TKIP on the access point, your client adapter's firmware must support TKIP; otherwise, the client cannot associate. Broadcast Key SSID PAC file 5-16 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 61
    access points) MIC Automatically enabled in driver Set up and enable WEP with full encryption, set MIC to MMH or select Enable MIC check box, and set Use Aironet Extensions to Yes OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 62
    Access Point Setting Automatically enabled in firmware Set up and enable WEP, set TKIP to Cisco or select Enable Per Packet Keying check box, and set Use Aironet Keys Screen 5-18 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 63
    key, following the guidelines outlined in Step 5 of the "Enabling Static WEP and Entering a New Static WEP Key" section on page 5-18. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-19
  • Cisco AIR-PCM352 | Configuration Guide - Page 64
    in order to minimize the risk of successful attacks by rogue access points. Refer to the "Creating Strong Passwords" section on page 9-4 for tips on creating strong passwords. 5-20 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 65
    1100 series access points). • All necessary infrastructure devices such as access points, servers, gateways, and user databases must be properly configured for EAP-FAST authentication. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 66
    , if a domain name is entered in the User Domain field, the sum of the username and domain name is limited to 63 ASCII characters. 5-22 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 67
    these steps to import a PAC file: a. Tap the PAC Import button. The Aironet Client Utility Open screen appears (see Figure 5-4). Figure 5-4 Aironet Client Utility Open Screen OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-23
  • Cisco AIR-PCM352 | Configuration Guide - Page 68
    you are asked if you want to replace the existing PAC. If you tap Yes, the existing PAC is replaced by the new one from the imported for instructions on authenticating using EAP-FAST. 5-24 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL
  • Cisco AIR-PCM352 | Configuration Guide - Page 69
    Windows CE .NET instead of ACU. See Appendix E for instructions. • Client adapters must support WEP. • Access points to which your client adapter will attempt to authenticate must use the following firmware versions or later: 11.23T (340 and 350 series access points), 12.2(4)JA (1100 series access
  • Cisco AIR-PCM352 | Configuration Guide - Page 70
    steps to import the CA certificate. Step 1 Select Start > Programs > Cisco > CertMgr. The Certificate Manager screen appears (see Figure 5-6). Figure 5-6 (see Figure 5-7). 5-26 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 71
    PC that is on the same network as the certificate server you want to use. Select Start > Programs > Cisco > Enroll. The Certificate Enrollment screen appears (see Figure 5-8). OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-27
  • Cisco AIR-PCM352 | Configuration Guide - Page 72
    , and server name for your certificate server, which can be obtained from your system administrator, in the appropriate fields. Tap the Enroll button. The box at the Value box. 5-28 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 73
    on the Authentication screen to start the authentication process. Step 4 Refer to the "Using EAP-TLS" section on page 6-5 for instructions on authenticating using EAP-TLS. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-29
  • Cisco AIR-PCM352 | Configuration Guide - Page 74
    . Note If you leave this field blank, the server name is not verified, and a connection is established as long as the certificate is valid. 5-30 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 75
    which the server certificate was downloaded appears in the Trusted root to rogue access points. Tap OK " section on page 6-6 for instructions on authenticating using PEAP. Disabling Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 5-31
  • Cisco AIR-PCM352 | Configuration Guide - Page 76
    Disabling LEAP, EAP-FAST, or Host-Based EAP Chapter 5 Configuring the Client Adapter 5-32 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 77
    following topics are covered in this chapter: • Overview, page 6-2 • Using LEAP or EAP-FAST, page 6-2 • Using EAP-TLS, page 6-5 • Using PEAP, page 6-6 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 6-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 78
    • Using PEAP, page 6-6 Follow the instructions for your profile's authentication type to successfully Wireless Login Module screen appears (see Figure 6-1). Figure 6-1 Wireless Login Module Screen Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 79
    possibly because it is out of range of an access point. After 30 seconds, a message appears indicating that the authentication attempt timed out and that you need to rerun WLM. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 6-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 80
    New fields and tap OK. Step 3 If prompted, log off and on again in order to update your local cached account with your new password. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 6-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 81
    certificate to begin the EAP authentication process, tap the message and follow the instructions provided to accept the certificate. Note You should not have to accept field. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 6-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 82
    steps to EAP authenticate. Note These instructions are applicable for use with Windows NT or 2000 domain, LDAP, or wireless network, tap this message. Then the Static Password screen appears. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 83
    the authentication is successful, the Status field displays Authenticated, and the IP Address field displays the IP address of the client adapter. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 6-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 84
    Password fields. Note The password is also changed in the Windows NT or 2000 domain user database. Step 3 Tap OK. The client adapter should authenticate using your new password. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 6-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 85
    , page 7-2 • Setting Signal Strength Display Units, page 7-2 • Viewing the Status of Your Client Adapter, page 7-3 • Viewing Statistics for Your Client Adapter, page 7-5 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 86
    Status screen. Step 1 Double-tap the ACU icon or select Start > Programs > Cisco > ACU. The Profiles screen appears. Step 2 Tap the Options button. The ACU to save your changes. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 87
    decibels with respect to milliwatts (dBm). Figure 7-2 Status Screen (with Signal Strength as a Percentage) Figure 7-3 Status Screen (with Signal Strength in dBm) OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 88
    access point name or MAC address is shown only if the client adapter is in infrastructure mode and Aironet Extensions are enabled (on access points running Cisco 7-2 for information. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-4 OL-1375-
  • Cisco AIR-PCM352 | Configuration Guide - Page 89
    status tests from the access point or ACU site survey tool are performed at the firmware level; therefore, they have no effect on the statistics shown by the Statistics screen. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 90
    access point coverage on a channel, high multipath conditions from bounced signals, or the presence of other 2.4-GHz signals from devices such as microwave ovens, wireless handset phones, etc. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 91
    Statistics screen appears (see Figure 7-5). Figure 7-5 Transmit Statistics Screen Table 7-3 describes each transmit statistic that is displayed for your client adapter. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 92
    7-6). Note The MIC Stats option is available only if your client adapter's driver supports MIC and only if MIC is enabled on the access point. Figure 7-6 MIC Statistics Screen Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 93
    number of packets that were discarded due to the MIC sequence number being wrong. Step 4 Tap OK to exit the Statistics screen. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 7-9
  • Cisco AIR-PCM352 | Configuration Guide - Page 94
    Viewing Statistics for Your Client Adapter Chapter 7 Performing Diagnostics 7-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 95
    Software, page 8-3 • Client Utility Procedures, page 8-8 • CA and User Certificate Procedures (Host-Based EAP on PPC 2002 Devices Only), page 8-10 • Restarting the Client Adapter, page 8-11 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide
  • Cisco AIR-PCM352 | Configuration Guide - Page 96
    Removing a PC Card from a Windows CE Device Follow the instructions below whenever you need to remove the PC card from your Windows CE device. To remove a PC be re-established. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 97
    steps: a. Double-tap the ACU icon or select Start > Programs > Cisco > ACU. b. Tap the Firmware tab. The Firmware screen appears (see Figure 8-2). Figure 8-2 Firmware Screen OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 98
    . The screen indicates that you are connected as a guest. Use the laptop or PC's web browser to access the following URL: http://www.cisco.com/public/sw-center/sw-wireless.shtml Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 99
    . On your Windows CE device, open ACU and tap the Firmware tab. The Firmware screen appears (see Figure 8-2). Tap the Browse button. The Open window appears (see Figure 8-3). OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 100
    and client utilities and to upgrade them if more recent versions are available from Cisco.com. Note The driver, client utilities, and online help files are installed together. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-6 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 101
    driver and client utilities and then follow the instructions in the "Installing the Driver and Client Utilities" section on page 3-2 to install the new driver and client utilities. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 102
    -tap the Wireless Login Module icon or select Start > Programs > Cisco > Wireless Login Module. The Wireless Login Module screen appears. Exiting a Client Utility To exit ACU or WLM, tap OK. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 103
    tap the icon. Then tap Delete and Yes to confirm your decision. Note You can also use File Explorer or Windows Explorer to browse to the desktop, select the icon, and delete it. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-9
  • Cisco AIR-PCM352 | Configuration Guide - Page 104
    EAP on PPC 2002 Devices Only) Follow the instructions in this section to view or remove CA access information about the certificate, including its issuer, expiration date, and serial number. 8-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 105
    the Edit button, and tap OK. The driver stops the client adapter's radio, writes the configuration (although no parameter settings have been changed), and restarts the radio. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 8-11
  • Cisco AIR-PCM352 | Configuration Guide - Page 106
    Restarting the Client Adapter Chapter 8 Routine Procedures 8-12 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 107
    Troubleshooting Information, page 9-2 • Interpreting the Indicator LEDs, page 9-2 • Troubleshooting the Client Adapter, page 9-3 • Error Messages, page 9-5 • Getting Help, page 9-17 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 108
    access this site, go to Cisco.com, click Technical Support > Hardware Support > Wireless Devices. Then select your product and Troubleshooting to find information on the problem . Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-2 OL-
  • Cisco AIR-PCM352 | Configuration Guide - Page 109
    mode, etc. • If the client adapter still fails to establish contact, refer to the "Obtaining Technical Assistance" section in the Preface for technical support information. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 110
    which comes from "For your own safety, choose a 10-character password!" Note Cisco recommends that you create your own strong passwords rather than use these sample passwords. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 111
    9 Troubleshooting Error Messages Windows CE device. Recommended Action Insert a client adapter if you want to start wireless communications. If necessary, reset the Windows CE device. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 112
    . Recommended Action Tap OK twice. Then select a profile in ACU that uses host-based EAP and reactivate the Authentication Manager. If necessary, reset the Windows CE device. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-6 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 113
    Action Download the WinCE-PCMCIA-LMC-v250.exe file again and extract its files to a folder, making sure that you keep all of the extracted files together in the one folder. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 114
    was unable to authenticate within a specified amount of time. Recommended Action Tap OK. Then open WLM, enter your LEAP credentials, and try to authenticate again. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 115
    name in the Wireless Login Module screen exceeds the maximum number supported by LEAP, which is 64. Recommended Action Enter a username and domain name with fewer characters. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-9
  • Cisco AIR-PCM352 | Configuration Guide - Page 116
    Troubleshooting manual provisioning (for example, a PAC authority was not selected for manual that your password has expired, follow the instructions in the "After Your EAP-FAST Credentials Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 117
    . The operation was not completed. Recommended Action Try again to import the PAC file. If the same message appears, obtain a new PAC file from your system administrator and import it. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-11
  • Cisco AIR-PCM352 | Configuration Guide - Page 118
    also be entered. Recommended Action Tap OK to acknowledge the message. Then enter your EAP-FAST username in the User Name field on the Wireless Login Module screen and tap OK. 9-12 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 119
    Chapter 8 to uninstall the client adapter's existing driver and client utilities; then follow the instructions in Chapter 3 to upgrade to the latest client adapter software. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-13
  • Cisco AIR-PCM352 | Configuration Guide - Page 120
    Error Messages Chapter 9 Troubleshooting Error Message You must select a PAC Authority when using manual PAC provisioning. Explanation the Windows CE device and try the operation again. 9-14 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 121
    Chapter 9 Troubleshooting Error Messages domain name in the Static Password screen exceeds the maximum number supported by PEAP, which is 255. Recommended Action Enter a set OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE 9-15
  • Cisco AIR-PCM352 | Configuration Guide - Page 122
    Messages Chapter 9 Troubleshooting Error Message The the specified root certificate is missing from the system. Recommended Action Make sure that PEAP and the Enroll button. 9-16 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 123
    Devices To access help related to ACU on an HPC or Windows CE .NET device, open ACU and tap the ? button on the top of the screen. Select the topic for which you want information. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 124
    Getting Help Chapter 9 Troubleshooting 9-18 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 125
    this appendix: • Physical Specifications, page A-2 • Radio Specifications, page A-3 • Power Specifications, page A-4 • Safety and Regulatory Compliance Specifications, page A-4 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE A-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 126
    Type II PC card LM card Standard Type II PC card with RF connectors Connector 68-pin PCMCIA Status indicators Operating temperature Storage temperature Green human body model) Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE A-2 OL-1375-
  • Cisco AIR-PCM352 | Configuration Guide - Page 127
    rates Modulation Receiver sensitivity Receiver delay spread (multipath) Note If you are using an older version of a 350 series client 2 Mbps 300 ns @ 5.5 Mbps 140 ns @ 11 Mbps OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE A-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 128
    B AS/NZS 3548 Class B VCCI Class B EN 55024 Radio approvals FCC Part 15.247 Canada RSS-139-1, RSS-210 Japan Telec 33B EN 300.328 RF exposure OET-65C RSS-102 ANSI C95.1 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE A-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 129
    topics are covered in this appendix: • Explosive Device Proximity Warning, page B-2 • Dipole Antenna Installation Warning, page B-3 • Warning for Laptop Users, page B-4 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE B-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 130
    änd inte den trådlösa nätverksenheten i närheten av oskyddade tändhattar eller i en explosiv miljö om inte enheten modifierats för att kunna användas i sådana sammanhang. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE B-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 131
    más del cuerpo de las personas. Varning! För att följa FCC-exponeringsgränserna för radiofrekvens (RF), bör dipolsantenner placeras på minst 20 cm avstånd från alla människor. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE B-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 132
    tempi di esposizione alle frequenze. Advarsel Du må overholde begrensningene for RF-eksponering som er fastsatt i ANSI C95.1-standardene. Derfor anbefaler vi begrenser eksponeringstiden. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE B-4
  • Cisco AIR-PCM352 | Configuration Guide - Page 133
    limite o tempo de exposição. Para cumplir los límites de exposición a radiofrecuencia (RF) que se establecen en la norma ANSI C95.1, al utilizar un equipo portátil längre tid. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE B-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 134
    Warning for Laptop Users Appendix B Translated Safety Warnings Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE B-6 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 135
    LAN Client Adapters in Japan, page C-6 • Administrative Rules for Cisco Aironet Wireless LAN Client Adapters in Taiwan, page C-7 • Declaration of Conformity Statements, page C-8 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 136
    antennas or those listed in Table C-1. Any changes or modification to the product not expressly approved by Cisco could void the user's authority to operate this device. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 137
    outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 138
    mmelser i Direktiv 1999/5/EC. For the 350 series, the following standards were applied: • Radio: EN 300.328-1, EN 300.328-2 • EMC: EN 301 489-1, EN 301 489-17 • Safety: EN 60950 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 139
    for operation. For more details, contact your customer service representative. Note Combinations of power levels and antennas resulting RF Exposure from radio frequency devices. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 140
    mobile object identification (RF-ID) systems (licensed premises radio RF interference to a specified low-power radio station of RF-ID, contact the number below. Contact Number: 03-5219-6000 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 141
    is clear. The authorized radio station means a radio-communication service operating in accordance with COMMUNICATION ACT. The operation of the low incidental radiator. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 142
    www.ciscofax.com Declaration of Conformity Statements for European Union Countries The Declaration of Conformity statements for the European Union countries are listed below: Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-8 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 143
    Appendix C Declarations of Conformity and Regulatory Information Declaration of Conformity Statements OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-9
  • Cisco AIR-PCM352 | Configuration Guide - Page 144
    Declaration of Conformity Statements Appendix C Declarations of Conformity and Regulatory Information C-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 145
    Appendix C Declarations of Conformity and Regulatory Information Declaration of Conformity Statements OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE C-11
  • Cisco AIR-PCM352 | Configuration Guide - Page 146
    Declaration of Conformity Statements Appendix C Declarations of Conformity and Regulatory Information C-12 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 147
    antenna gains allowed per domain. The following topics are covered in this appendix: • Channels, page D-2 • Maximum Power Levels and Antenna Gains, page D-3 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE D-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 148
    can be used indoors and outdoors. Users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of Mexico. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE D-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 149
    13.5 21 Maximum Power Level (mW) 100 100 100 100 100 100 100 20 100 50 30 30 5 5 5 1 100 50 30 30 5 5 5 1 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE D-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 150
    Gain (continued) Regulatory Domain Japan (-J) (10 mW/MHz EIRP maximum) Antenna Gain (dBi) 0 2.2 5.2 6 8.5 12 13.5 21 Maximum Power Level (mW) 50 30 30 30 n/a n/a 5 n/a Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE D-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 151
    E-2 • Preparing for Configuration (EAP-TLS and PEAP Only), page E-4 • Configuring the Client Adapter, page E-5 • Associating to an Access Point Using Windows CE .NET, page E-10 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 152
    device. When the driver loads and reads the client adapter's registry parameters, it also finds the static WEP keys, unencrypts them, and stores them in volatile memory on the adapter. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-2 OL
  • Cisco AIR-PCM352 | Configuration Guide - Page 153
    and to the following URL for additional information on RADIUS servers: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur_c/scprt2/scrad.htm OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 154
    (at a time that is predetermined by the server). Note Refer to your Microsoft documentation for instructions on importing certificate files on your Windows CE .NET device. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 155
    in an ad hoc network (a computer-to-computer network without access points), tap Add New Settings. The Configure Wireless Network screen (General tab) appears (see Figure E-2). OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 156
    of wireless networks, make sure the SSID appears in the Network name field. • If you selected Add New Settings, enter the case-sensitive SSID of the access point to Figure E-3). Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-6 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 157
    for me automatically check box. b. Obtain the WEP key for the access point (in an infrastructure network) or other clients (in an ad hoc network) from your system administrator. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-7
  • Cisco AIR-PCM352 | Configuration Guide - Page 158
    access point, the word Connected appears to the right of the network name in the list of wireless networks. Refer to the "Using EAP-TLS" section on page 6-5 for instructions on authenticating using EAP-TLS. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide
  • Cisco AIR-PCM352 | Configuration Guide - Page 159
    field blank, you are prompted to accept a connection to the server to which your client adapter is connected during the authentication process. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE E-9
  • Cisco AIR-PCM352 | Configuration Guide - Page 160
    to the access point. To force the client adapter to associate to a different access point, you must select a different network from the list of available networks and tap OK. E-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL
  • Cisco AIR-PCM352 | Configuration Guide - Page 161
    F-2 • Setting Signal Strength Display Units, page F-3 • Using Passive Mode, page F-4 • Using Active Mode, page F-6 • Forcing the Client Adapter to Reassociate, page F-12 OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 162
    environment - Clear or open areas provide better radio range than closed or filled areas. Also, the less cluttered the work environment, the greater the range. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-2 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 163
    the Survey screen. Step 1 Double-tap the ACU icon or select Start > Programs > Cisco > ACU. The Profiles screen appears. Step 2 Tap the Options button. The ACU Options changes. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 164
    to activate the site survey passive mode and obtain current information about RF network traffic. Step 1 From the Profiles screen, tap the Survey (with Signal Strength in dBm) Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-4 OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 165
    access point name or MAC address is shown only if the client adapter is in infrastructure mode and Aironet Extensions are enabled (on access points running Cisco for information. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 166
    communicate with the access point. Range: 0 RF packets. Step 1 From the Site Survey - Passive screen (see Figure F-2), tap the Setup button. The Active Mode Setup screen appears (see Figure F-4). Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 167
    not a Cisco Aironet device, do not check this check box. In this case, the test sends out loopback packets, which originate from and return to the client adapter. Default: Checked OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
  • Cisco AIR-PCM352 | Configuration Guide - Page 168
    test built into the radio firmware does not support it Value: 1, 2, 5.5, size that is typical during normal system use. Range: 30 to 1450 firmware's default value for retries (16) will be used. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows
  • Cisco AIR-PCM352 | Configuration Guide - Page 169
    Packet Type Unicast Multicast Description When unicast packets are used, the system expects to receive an acknowledgment from the destination, and retries as a Percentage) OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-9
  • Cisco AIR-PCM352 | Configuration Guide - Page 170
    access point name or MAC address is shown only if the client adapter is in infrastructure mode and Aironet Extensions are enabled (on access points running Cisco -95 to -45 dBm F-10 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 171
    to or from its associated access point. Value: 1, 2, 5.5, or 11 Mbps The client adapter's ability to communicate with the access point. Value: Not Associated, information. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-11
  • Cisco AIR-PCM352 | Configuration Guide - Page 172
    to another access point. Follow these steps to attempt to force the client adapter to disassociate from its current access point and reassociate to another during a site survey. F-12 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL
  • Cisco AIR-PCM352 | Configuration Guide - Page 173
    displays Not Associated while the client adapter disassociates from its current access point and then displays Associated once the adapter is reassociated to an access point. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE F-13
  • Cisco AIR-PCM352 | Configuration Guide - Page 174
    Forcing the Client Adapter to Reassociate Appendix F Performing a Site Survey F-14 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 175
    , EAP-FAST, EAP-TLS, or PEAP authentication and you enable this feature, the access point changes the dynamic broadcast WEP key that it provides at the interval you select. OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE GL-1
  • Cisco AIR-PCM352 | Configuration Guide - Page 176
    continuously over a wide frequency band. Duplicate Packets Packets that were received twice because an acknowledgement got lost and the sender retransmitted the packet. GL-2 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • Cisco AIR-PCM352 | Configuration Guide - Page 177
    its publications, conferences, and standards development activities. The body responsible for the Ethernet 802.3 and wireless LAN 802.11 specifications. The wired Ethernet network. Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE GL-3
  • Cisco AIR-PCM352 | Configuration Guide - Page 178
    client adapter's firmware and the Cisco software that supports it, rather than in the operating system. With LEAP, a username and password are used by the client adapter to perform mutual authentication with the RADIUS server through an access point. M MAC Address MIC Modulation Multicast Packets
  • Cisco AIR-PCM352 | Configuration Guide - Page 179
    tolerance and unlicensed operation. Service set identifier. A unique identifier that stations must use to be able to communicate with an access point. The SSID can be . OL-1375-04 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE GL-5
  • Cisco AIR-PCM352 | Configuration Guide - Page 180
    protect your data as it is transmitted through your wireless network by encrypting it through the use of encryption keys. A computing device with an installed client adapter. GL-6 Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE OL-1375-04
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Cisco Aironet 350 Series
Wireless LAN Client Adapters
Installation and Configuration Guide for
Windows CE
Software Release 2.50
March 2004
Customer Order Number:
Text Part Number: OL-1375-04