Cisco C1861-SRST-B/K9 Hardware Installation Guide
Cisco C1861-SRST-B/K9 - 1861 Integrated Services Router Manual
 |
UPC - 882658171147
View all Cisco C1861-SRST-B/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco C1861-SRST-B/K9 manual content summary:
- Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 1
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 2
, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of between Cisco and any other company. (0809R) Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide Copyright ©2005-2008 Cisco Systems - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 3
1-7 Cisco 1811 Chassis 1-9 Cisco 1812 Chassis 1-10 Interface Numbering 1-11 Specifications 1-12 Regulatory Compliance 1-13 Preinstallation Requirements 2-1 Safety Recommendations 2-2 Safety with Electricity 2-2 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide iii - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 4
4-6 Console Port Connections 4-7 Connecting to the Console Port 4-7 Auxiliary Port Connections 4-7 Connecting to the Auxiliary Port 4-8 Connecting the Radio Antennas to the Wireless Router 4-8 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide iv OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 5
Cisco Router and Security Device Manager 5-4 Initial Configuration Using the Setup Command Facility 5-4 Initial Configuration Using the Cisco CLI-Manual Configuration 5-7 Verifying the Initial Configuration 5-8 Completing the Configuration 5-9 Troubleshooting 6-1 Solving Problems 6-1 Troubleshooting - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 6
Contents INDEX Installing a CompactFlash Memory Card 7-8 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide vi OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 7
to establish network communication. For detailed software configuration information, see the Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide and to the Cisco IOS configuration guides and command reference publications. These publications are available on line. See - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 8
of the warnings that appear in these publications, see the Regulatory Compliance and Safety Information for Cisco 1800 Integrated Services Routers (Fixed) document that accompanied your router. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide viii OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 9
that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U SIE DIESE SICHERHEITSANWEISUNGEN AUF OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide ix - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 10
atenção os perigos envolvidos no manuseamento de circuitos eléctricos e familiarize-se com as práticas habituais de prevenção de acidentes. Para ver traduções dos anordning. OBS! SPARA DESSA ANVISNINGAR Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide x OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 11
Preface Safety Warnings OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide xi - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 12
de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção GEM DISSE ANVISNINGER Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide xii OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 13
Preface Safety Warnings OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide xiii - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 14
Cisco 1803 Integrated Services Router Cabling and Installation Cisco 1800 Series Integrated Services Router (Fixed) Software Configuration Guide Regulatory Compliance and Safety Information for Cisco 1800 Integrated Services Routers (Fixed) Cisco Modular Access Router Cable Specifications Cisco - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 15
a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide xv - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 16
Preface Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide xvi OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 17
the routers and includes the following sections: • Hardware Features, page 1-2 • Chassis Views, page 1-7 • Interface Numbering, page 1-11 • Specifications, page 1-12 • Regulatory Compliance, page 1-13 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-1 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 18
the following URL: http://tools.cisco.com/Support/CPI/index.do Feature Summary Table 1-1 summarizes the built-in ports and other hardware features of the Cisco 1800 series fixed-configuration routers. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-2 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 19
cable modem, ADSL, and router. Cisco 1801, Cisco 1802, and Cisco 1803 routers have one 10/100 FE WAN port. Cisco 1811 and Cisco 1812 routers have two 10/100 FE WAN ports. Cisco 1801 router only. Provides connection to an ADSL network. Does not support the autoswitch function. Cisco 1802 router only - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 20
system software image. All Cisco 1800 series Cisco 1811 and Cisco 1812 routers; ports 1 through 8 on the Cisco 1801, Cisco 1802, and Cisco 1803routers). Green indicates a successful FE link. Off indicates no link. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 21
1811 only. For LED troubleshooting information, including possible trouble causes and corrective actions, see Table 6-1 in the "Troubleshooting" chapter. Integrated 802.11a/b/g Radio Module (Wireless Models Only) The Cisco 1800 series fixed-configuration routers with the wireless option have an - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 22
specified for the router; the battery is not field-replaceable. Note If the lithium battery in a Cisco 1800 series fixed-configuration router fails, the router must be returned to Cisco for repair. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-6 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 23
127447 1 CompactFlash Slot Figure 1-4 Back Panel of Cisco 1801 Router 127446 CISCO 1801 9 12 3 45 6 7 9 8 1 ADSL over POTS WAN port 2 ISDN BRI S/T port 6 POE connector1 7 Power switch OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-7 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 24
only. It is not installed by default. 2. The Cisco 1802 only has one FE WAN port, which is the lower of the two ports shown. The upper port is disabled, and reserved for a future purpose. 127446 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-8 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 25
upper port is disabled, and reserved for a future purpose. Cisco 1811 Chassis Figure 1-9 shows the front panel of a Cisco 1811 router. Figure 1-10 shows the rear panel of a Cisco 1811 router. 127446 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-9 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 26
-upgradable option only. It is not installed by default. Cisco 1812 Chassis Figure 1-11 shows the front panel of a Cisco 1812 router. Figure 1-12 shows the back panel of a Cisco 1812 router. 127450 1-10 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 27
the rear of the router), and switch ports are numbered incrementally, FE 2 through FE 5, to the left along the bottom row, and then incrementally, FE 6 through FE 9, to the left along the top row. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-11 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 28
POTS, ADSL over ISDN, G.SHDSL, ISDN S/T, and V.92 modem WAN ports are all numbered port 0 of their various type. • On the Cisco 1811 and Cisco 1812 routers, the USB 2.0 ports are numbers usb 0 and usb 1. The usb 0 port is the lower of the two ports and usb 1 is the upper port. Specifications Table - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 29
Compliance For compliance information, see the Regulatory Compliance and Safety Information for Cisco 1800 Integrated Services Routers (Fixed) document that accompanied the router shipment. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 1-13 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 30
Regulatory Compliance Chapter 1 Overview 1-14 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 31
. The telecommunications lines must be disconnected 1) before unplugging the main power connector or 2) while the housing is open, or both. Statement 1043 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 2-1 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 32
periods of lightning activity. Statement 1001 Warning Read the installation instructions before connecting the system to the power source. Statement 1004 compressions; then take appropriate action. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 2-2 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 33
in wet locations unless the jack is specifically designed for it. • Never touch and 10 megohms (Mohm). Additional Warnings for Wireless Routers Warning In order to comply with FCC radio frequency (RF) exposure Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 2-3 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 34
prevent future problems. Power routers are compatible with three different antenna types-swivel-mount dipole antennas that mounts on the back panel of the router, a wall-mount antenna, and a ceiling-mount antenna. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 35
information placed in Site Log Site power voltages verified Installation site power check completed Required tools available Additional equipment available Router received Router quick start guide received OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 36
network modules and other upgrades - Configuration changes - Maintenance schedules and requirements - Performance of maintenance procedures - Observations of intermittent problems - Comments and notes Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 2-6 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 37
Manager (SDM) Quick Start Guide • Product Registration card and Cisco.com card Inspect all items for shipping damage. If anything appears to be damaged, or if you have problems installing or configuring your router, contact customer service. Warranty, service, and support information is given in the - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 38
for ISDN BRI S/T interfaces (if this device was not supplied by your service provider) • Wall-mount or ceiling-mount antennas for wireless routers (if you do not intend to use the supplied dipole antennas) Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 2-8 OL - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 39
instructions in the following sections. • Setting a Cisco 1800 Series Fixed-Configuration Router on a Desktop • Chassis Grounding • Mounting a Cisco 1800 Series Fixed-Configuration Router on a Wall OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 40
. The screws must be long enough to penetrate at least 3/4 inch (20 millimeters) into the supporting wood or metal wall stud. • For hollow-wall mounting, use two number-10 wall anchors with washers. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 3-2 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 41
18 AWG (1 mm2) or larger copper wire and an appropriate user-supplied ring terminal. Follow these steps to install the ground connection: OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 3-3 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 42
. Tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m). Note To see an illustration of this procedure, go to the following URL: http://www.cisco.com/en/US/docs/routers/access/1800/1841/hardware/quick/guide/1800qsg.html Step 4 Connect the other end of the ground wire to a known reliable - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 43
topics: • Connecting Routers to AC Power, page 4-2 • Connecting WAN and LAN Cables, page 4-2 Warning Read the installation instructions before connecting the system to the power source. Statement 1004 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-1 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 44
cables and transceivers can be ordered from Cisco Systems. For ordering information, contact customer service. For cable pinouts, refer to the Cisco Modular Access Router Cable Specifications document. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-2 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 45
the end away from ISDN BRI Connections See the following online documents for more information about network connections and interfaces: • Cisco Interface Cards Hardware Installation Guide • Cisco Modular Access Router Cable Specifications OL-6425-03 Cisco 1800 Series Integrated Services Routers - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 46
in detail in the following documents: • Cisco Modular Access Router Cable Specifications • Cisco Network Modules Hardware Installation Guide • Cisco Interface Cards Hardware Installation Guide Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-4 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 47
to your router either locally (with a console terminal or PC) or remotely (with a modem). Cisco Systems provides the following cables for connecting your router to a console terminal, PC, or modem: OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-5 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 48
auxiliary port supports flow control, it is ideally suited for use with the high-speed transmissions of a modem. Because console terminals send data at slower speeds than modems, the console port is ideally suited for use with console terminals. Cisco 1800 Series Integrated Services Routers (Fixed - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 49
port, see the "Connecting to a Console Terminal or Modem" section on page 4-5. For cable and port pinouts, see the Cisco Modular Access Router Cable Specifications online document on Cisco.com. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-7 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 50
shows this orientation for a router that is mounted in a rack or placed on a horizontal surface. A wall-mounted router would typically have the dipole antennas pointing straight up or straight down. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-8 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 51
Chapter 4 Power, Cable, and Antenna Connection Procedures Figure 4-2 Dipole Antenna Orientation Connecting the Radio Antennas to the Wireless Router 127911 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 4-9 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 52
Connecting the Radio Antennas to the Wireless Router Chapter 4 Power, Cable, and Antenna Connection Procedures 4-10 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 53
• A suitable PC COM port is selected in the terminal emulation program. • You have selected passwords for access control. • You have determined the IP addresses for the Ethernet and serial interfaces. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 5-1 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 54
to enter the initial configuration dialog? [yes/no]: To use the setup command facility to configure the router, see the "Initial Configuration Using the Setup Command Facility" section on page 5-4. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 5-2 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 55
Cisco Router and Security Device Manager • Initial Configuration Using the Setup Command Facility • Initial Configuration Using the Cisco CLI-Manual Configuration • Verifying the Initial Configuration OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 56
SDM software and the Cisco Router and Security Device Manager (SDM) Quick Start Guide were not shipped with your router. If you want to use SDM, you can download the latest version of SDM and instructions for installing it from the following location: http://www.cisco.com/pcgi-bin/tablebuild.pl - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 57
on your router model, the installed interface modules, and the software image. The following facility, enter yes when the power-up messages have ended. Would you like to enter the initial configuration dialog? Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 5-5 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 58
bits; mask is /16 Step 10 The configuration is displayed: The following configuration command script was created: hostname Router enable secret 5 $1$AaVU$9tl.HLXo ip address ! interface FastEthernet3 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 5-6 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 59
the CLI, and it directs you to documentation for the CLI configuration. You can use the CLI if you see the following messages at the end of the startup sequence: --- System Configuration Dialog --- OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 5-7 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 60
> prompt, press Return: ... flashfs[4]: Initialization complete. Router> Enter privileged EXEC mode: Router> enable Router# For configuration procedures, see the online document Cisco 1800 Series Integrated Services Router (Fixed) Software Configuration Guide. Note To avoid losing the work that you - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 61
Series Integrated Services Router (Fixed) Software Configuration Guide. The software configuration guide includes the following topics: • Basic software configuration • Feature documentation • Configuration examples • Troubleshooting and maintenance OL-6425-03 Cisco 1800 Series Integrated Services - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 62
Configuring the Router Chapter 5 Power-Up and Initial Configuration Procedures 5-10 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 63
router performance and operation. See the following sections: • Reading System LEDs, page 6-4 • Reading Port and Connection LEDs, page 6-4 When solving problems, consider the following router subsystems: OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 64
Hardware Warranty Terms" section of the Preface for warranty information, or contact customer service. Environmental Reporting Features The following system messages indicate environmental problems: Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 6-2 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 65
be a problem with the module or cable. See the "Cisco One-Year Limited Hardware Warranty Terms" and the "Obtaining Documentation and Submitting a Service Request" sections of the Preface for warranty and customer service contact information. OL-6425-03 Cisco 1800 Series Integrated Services Routers - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 66
series fixed-configuration routers, and is not installed by default. Reading Port and Connection LEDs Check the port and connection LEDs to determine router performance and operation. See Table 6-2. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 6-4 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 67
Activity on the first B channel. Indication is for information only. Blinking green Activity on the second B channel. Indication is for information only. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 6-5 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 68
again; if the error condition has cleared, a recovery message appears. Table 6-3 describes system error and recovery messages and the LED conditions that might accompany them. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 6-6 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 69
Tool and Troubleshooting Assistant. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear. OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 70
More Troubleshooting Help-Cisco Technical Assistance Center Chapter 6 Troubleshooting Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 6-8 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 71
should be allowed to install, replace, or service this equipment. Statement 1030 Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. Statement 1 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 7-1 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 72
the installation instructions before connecting end away from the unit first. Statement 1026 Removing the Chassis Cover The Cisco 1800 series fixed-configuration routers ISDN B2 CF Cisco 1800 Series 3 90 127164 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 73
router routers. Figure 7-2 Module Locations in Cisco 1800 Series Fixed-Configuration Routers 2 1 4 127246 3 1 Fan 2 Power supply 3 DIMM module 4 Holes used for inline power supply card installation OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 74
and ensure that it makes good contact with your skin. Connect the equipment end of the wrist strap to the metal part of the chassis. Caution Handle in an antistatic bag to protect it from ESD damage. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 7-4 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 75
snap over the end of the DIMM. Installing the Optional Inline Power Supply The inline power supply option for the Cisco 1800 series fixed-configuration routers includes an inline . Statement 1072 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 7-5 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 76
: Step 1 Step 2 Gently slide the cover of the router onto the chassis. Replace the cover screw that you removed when you opened the chassis. See the "Removing the Chassis Cover" section on page 7-2. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 7-6 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 77
ensure that it makes good skin contact. • Connect the equipment end of the strap to an unfinished chassis surface. • Place a The measurement should be between 1 and 10 megohms (Mohm). Removing a CompactFlash Memory Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 7-7 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 78
the ejector mechanism, the ejector button must remain pressed flush against the front panel when it is not being used to eject a CompactFlash memory card. Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide 7-8 OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 79
802.11b/g integrated radio module 1-3, 1-5 A AC power connection 4-1 ADSL-over-ISDN port description 1-3 ADSL-over-POTS port description 1-3 antennas connecting to the router 4-8 supported 1-6 autosensing feature 1-3 auxiliary port connecting to 4-8 description of 4-7 B baud rate modem 4-8 C cables - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 80
1-4 O omnidirectional antenna 1-6 opening chassis 7-2 P packing list 2-7 patch antenna 1-6 port ADSL-over-ISDN 1-3 ADSL-over-POTS 1-3 console 1-3 G.SHDSL 1-3 ISDN S/T port 1-3 power requirements 2-4 IN-2 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide OL-6425-03 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 81
4-1 restricted access 3-1 short-circuit (overcurrent) protection 4-2 TN power systems 2-4 warnings wireless routers 2-3 wireless routers description 1-5 supported antennas 1-6 wiring telephone 2-3 OL-6425-03 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide IN-3 - Cisco C1861-SRST-B/K9 | Hardware Installation Guide - Page 82
Index IN-4 Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide OL-6425-03
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco 1800 Series Integrated Services
Routers (Fixed) Hardware Installation
Guide
Text Part Number: OL-6425-03