Cisco SPA122 Installation Guide

INSTALLATION GUIDE

1

Cisco SPA122 ATA Installation Guide

For analog phone or fax extensions

Activating Your Cisco ATA

You will need your activation code to activate your Cisco ATA. The activation code was sent via

email. You can also retrieve it in the 8x8 Account Manager by following these instructions:

1. Go to

www.8x8.com

, click

Sign In

and select

Account Manager

; enter your administrator

username and password.

2. Click

Phone System

from the top navigation bar, select

View All Extensions,

then click

Activate Device

next to the extension you wish to activate.

3.

A pop-up screen displays the activation code for the extension.

Note:

If you are activating an Overhead Paging system, follow the special instructions provided

in the pop-up screen.

4.

To activate your device for voice or fax service, connect an analog phone (or fax machine with

phone) to the

Phone 1

port on the Cisco ATA. Lift the handset and follow the voice instructions

to enter the activation code. You will hear a message confirming your ATA is activated.

Installing your Cisco SPA122 ATA

Connect your device using the ports on the back panel. You will need either an analog phone or a

fax machine with an analog phone to activate your device using the

Phone 1

port.

Fax Machine

(2nd-Port Fax Plan Only)

Computer or

Laptop

Internet Connection

(Router or Broadband Modem)

Power Adapter

Analog Phone, Fax

or Paging System

•

Use the PHONE 1 port to connect an analog phone, analog overhead pager or fax machine with

an RJ-11 telephone cable. (If you purchased a 2nd-Port Fax Plan, connect that fax to the

PHONE 2 port.)

•

The

ETHERNET

port connects to an individual network device, such as a PC or a laptop.

•

The

INTERNET

port connects to your router or if you have no router, directly to your cable or

DSL broadband modem.

Note:

If you connect directly to a broadband modem, you must first configure your Cisco ATA to

act as a router. Please see the

Using your Cisco ATA as a Router section

.

•

The

Power

port is where you connect your AC power adapter.

For further assistance

on activating your Cisco

SPA122 ATA, contact 8x8

Customer Support on

1.888.898.8733