Cisco WET610N Quick Installation Guide
Cisco WET610N Manual
 |
View all Cisco WET610N manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco WET610N manual content summary:
- Cisco WET610N | Quick Installation Guide - Page 1
QUICK INSTALLATION GUIDE Wireless-N Ethernet Bridge with Dual-Band Model: WET610N Package Contents • Wireless-N Ethernet Bridge with Dual-Band • Setup Software and User Guide on CD-ROM • Quick Installation Guide • Network Cable • Power Adapter - Cisco WET610N | Quick Installation Guide - Page 2
- Cisco WET610N | Quick Installation Guide - Page 3
Agreement, select I accept this agreement. Click Next. D. For configuration, you will temporarily connect the Bridge to your router. (After configuration, you will connect the Bridge to the device that you want to equip with wireless.) Click Next. Wireless-N Ethernet Bridge with Dual-Band 3 - Cisco WET610N | Quick Installation Guide - Page 4
Connect the other end of the cable to one of the local network ports on your router. Click Next. G. Connect the included power adapter to the Power port of the Bridge. Click Next. H. Plug the power cord into an electrical outlet. Click Next. WET610N 4 Wireless-N Ethernet Bridge with Dual-Band - Cisco WET610N | Quick Installation Guide - Page 5
WET610N I. Wait until the Power and Ethernet LEDs are solidly lit. Click Next. J. Enter a password to protect access to the Bridge. Click Next. K. The wireless setup is next. Click Next. L. The Setup Wizard displays the Network Name of the wireless network with the strongest signal. To connect - Cisco WET610N | Quick Installation Guide - Page 6
by your wireless network. Security Key Enter the security key of your wireless network. Click Next. NOTE: If you are connecting to your own wireless network, you may want to configure wireless security on your router if you have not already done so. 6 Wireless-N Ethernet Bridge with Dual-Band - Cisco WET610N | Quick Installation Guide - Page 7
WET610N Installation P. Please wait while the Setup Wizard connects the Bridge to your wireless network. Warnings from your firewall or security application may appear. If necessary, click Always allow or Allow this time only to allow the wireless connection. Q. You will connect the Bridge to the - Cisco WET610N | Quick Installation Guide - Page 8
. You can move the Bridge anywhere within your wireless network's range, as long as you plug its power cord into an electrical outlet. Refer to the User Guide on the CD-ROM for information about advanced settings. Congratulations! Setup is complete. 8 Wireless-N Ethernet Bridge with Dual-Band - Cisco WET610N | Quick Installation Guide - Page 9
want to equip with wireless. Click Next. D. The Bridge is connected to your router with a network cable. Disconnect this network cable from your router. If you need to move the device that you want to equip with wireless, then do so now. Click Next. Wireless-N Ethernet Bridge with Dual-Band 9 - Cisco WET610N | Quick Installation Guide - Page 10
the Bridge anywhere within your wireless network's range, as long as you plug its power cord into an electrical outlet. Refer to the User Guide on the CD-ROM for information about advanced settings. Congratulations! Setup is complete. 8121710NC-JL 10 Wireless-N Ethernet Bridge with Dual-Band - Cisco WET610N | Quick Installation Guide - Page 11
- Cisco WET610N | Quick Installation Guide - Page 12
. For additional information or troubleshooting help, refer to the User Guide on the CD-ROM. Additional support is also available by phone or online. 24-Hour Technical Support 800-326-7114 Website http://www.linksys.com Support http://www.linksys.com/support RMA (Return Merchandise Authorization
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
QUICK INSTALLATION GUIDE
Wireless-N Ethernet Bridge
with Dual-Band
Model:
WET610N
Package Contents
Wireless-N Ethernet Bridge with Dual-Band
•
Setup Software and User Guide on CD-ROM
•
Quick Installation Guide
•
Network Cable
•
Power Adapter
•