Cobra 29 LTD BT 29LTDBT_MANL_vB
Cobra 29 LTD BT Manual
 |
View all Cobra 29 LTD BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Cobra 29 LTD BT manual content summary:
- Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 1
owned by Bluetooth SIG, Inc. 29 LTD BT Operating Instructions for your Cobra 29 LTD BT ® ANT/ ® Patent Pending © 2008 Cobra Electronics Corporation Version B Printed in China Part No. 480-455-P The CB Story The Citizens Band lies between the shortwave broadcast and 10-meter Amateur radio bands - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 2
Bluetooth Microphone Jack 20. Public Address Speaker Jack 21. External Speaker Jack 22. Power Jack 23. Antenna Connector 19 20 21 23 22 A2 Thank you for purchasing the Cobra 29 LTD BT CB Radio. Properly used, this Cobra product will give you many years of reliable service. Customer Support - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 3
Messages 28 CB 10 Codes 30 Frequency Ranges 32 29 LTD BT Specifications 33 Warranty Information 34 Optional Accessories 35 Accessory Order Info 37 If You Think You Need Service Back Cover Features of This Product • 40 CB Radio Channels • Heavy-Duty Noise Canceling Microphone • Full 4 Watts - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 4
is usually mounted to the underside of the dash with the microphone bracket beside it. Mounting and Connection Note The transceiver is held for adjustment at a convenient angle. Mounting and Connection 1 Hold the radio with the mounting bracket in the exact desired location. If there is no - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 5
is connected to the ignition switch. Note Before installing the CB radio, visually check the vehicle's battery connection to determine which terminal unit marked "Power". Be sure to observe polarity markings. 7 Mount the microphone bracket on either side of the unit (driver's left) using two screws - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 6
a serious problem. Also, when extremely low level signals are being received, the transceiver may be operated with the vehicle's engine turned off. The unit requires very little current and therefore will not significantly discharge the vehicle's battery. Even though the Cobra 29 LTD BT has an - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 7
power cord, antenna and microphone are connected to their proper connectors before starting. Setting Channel Selector ANT/ Setting Channel Selector 1 The CB/PA button should be in the CB position. ANT 1 Select one of forty channels and adjust volume. The selected channel is indicated by the LED - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 8
is critical in order to achieve optimum performance. Note Antenna Indicator LED will illuminate when TX if SWR is high. ANT/ 1 Select channel 20. 3 Push and hold mic button. ANT/ Operation Note Calibration must be made in an open area (never in a garage). Vehicle doors must be closed. No one - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 9
. Repeat calibration steps. 5 While still holding down the mic button, set the S/RF SWR CAL switch to the SWR position, to read the SWR reading. 6 Repeat the same steps two through five on Channel 1 and 40. This will check SWR for all channels. 1 Rotate the On/Off Volume knob clockwise the green - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 10
BT LED will flash rapidly to confirm Pairing mode. II. Follow the cell phone manufacturer's instruction to enable its Bluetooth function and enter the PIN using the Bluetooth feature, place your cell phone at least 12 inches away from the 29 LTD BT. Note The optional external microphone (see - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 11
(Noise Blanker / Automatic Noise Limiter) Switch Bright/Dim Switch 1 Switch to NOR to select desired channel. Bright/Dim Switch ANT/ 1 Switch to BRT or DIM to control brightness of the channel indicator and multi-function meter for day or nighttime driving. 1 When switched to ANL the Automatic - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 12
ohm impedance and be rated to handle at least 4.0 watts. When the external speaker is plugged in, the internal speaker is automatically disconnected. Note 1 Connect an external speaker and/or Bluetooth Cobra external speakers are microphone to the jacks on the rear panel. rated at 10 watts. RF - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 13
Setting Delta-Tune Setting Delta-Tune Delta-Tune functions as a "fine tune" control enabling you to capture a more readable signal, as well as eliminate adjacent channel interference. Operation Gate open ANT/ 2 Full counterclockwise rotation opens the "gate" allowing all signals in. Setting - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 14
and Regulations included with this unit before transmitting. Setting Dynamike® ANT/ 1 Select desired channel. Setting Dynamike® This controls the microphone sensitivity (outgoing audio level). Transmit Operation Transmit 1 Push and hold mic button to transmit.Transmitter is now activated.When - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 15
channel will be heard through the PA speaker. Adjust volume control to a normal listening level. 1 Connect an external PA speaker to the PA jack on the rear panel. 3 Push and hold microphone button and speak in a normal voice. Your voice will now transmit on the PA speaker. 2 Set CB/PA switch to - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 16
Home And Office Set-Up Temporary Mobile Set-Up Base Station Operation (From 120V AC House Current) Base to operate this transceiver by connecting it directly to 120v ac. Note For further information call Cobra Customer Service 773-889-3087. 2 Plug power cable into back of unit marked "Power". Be - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 17
activities. D. Profanity is not allowed. E. You may not transmit music with a CB. F. Selling of merchandise and/or services is prohibited. 1. Set to channel 9 for emergencies Be sure antenna is properly connected. 2. CB Distress Data When transmitting an emergency, you should request a "REACT BASE - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 18
by Out of service, leaving In service, subject to call channel Identify your station 30 How Your CB Can Serve You Code Meaning 10-29 Time is up for contact 10-30 Does not conform to FCC rules 10-33 Emergency traffic 10-34 Trouble Talk closer to mic 10-93 Check my frequency on this channel 10-94 Give - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 19
29 LTD BT Specifications The COBRA 29 LTD BT transceiver represents one of the most advanced AM two-way radios used as a Class D station in the Citizens Radio Service. This unit features advanced Phase Lock Loop (PLL) circuitry providing complete coverage of all 40 CB channels. Channel Channel - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 20
charge, repair or replace, at its option, defective CB radios, products or component parts upon delivery to the COBRA factory Service Department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges - Cobra 29 LTD BT | 29LTDBT_MANL_vB - Page 21
Speaker HG S100 Noise Canceling External Speaker HG S300 Noise Canceling With Talk Back External Speaker HG S500 Optional Accessories You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.A., you can order directly from Cobra. See ordering info on page
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
 |
 |
ANT/
®
®
The Citizens Band lies between the shortwave
broadcast and 10-meter Amateur radio bands,
and was established by law in 1949. The Class D
two-way communications service was opened
in 1959. (CB also includes a Class A citizens band
and Class C remote control frequencies.)
FCC Regulations
FCC regulations permit only “transmissions”
(one party to another) rather than “broadcasts”
(to a wide audience). Thus, advertising is not
allowed on CB Channels because that is
“broadcasting.”
FCC Warnings
All transmitter adjustments other than those
supplied by the manufacturer as front panel
operating controls, must be made by, or under
the supervision of, the holder of an FCC-issued
general Radio-Telephone Operator’s License.
Replacement or substitution of transistors, regular
diodes or other parts of a unique nature, with
parts other than those recommended by Cobra,
may cause violation of the technical regulations
of Part 95 of the FCC Rules, or violation of Type
Acceptance requirements of Part 2 of the Rules.
You should read and understand Part 95 (included
with this unit) of the FCC Rules and Regulations,
before operating your Cobra radio, even though
the FCC no longer requires you to obtain an
operator’s license.
What’s Included withYour 29 LTD BT
1.
CB transceiver
2.
Microphone with
Bluetooth
®
Button
3.
Transceiver bracket
4.
Microphone bracket
29 LTD BT
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL 60707 USA
Patent Pending
© 2008 Cobra Electronics Corporation
Version B
Printed in China
Part No. 480-455-P
Operating Instructions for
your Cobra 29 LTD BT
The CB Story
A1
For technical assistance, please call our Automated Help Desk which can assist
you by answering the most frequently asked questions about Cobra products.
773-889-3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached at 773-889-3087
8:00 am - 6:00 pm, Monday through Friday, Central Time.
Technical assistance is also available on-line in the Frequently Asked Questions
(FAQ) section at www.cobra.com or by e-mail to [email protected]
If you think you need service call 773-889-3087
“If your product should require factory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair.”
You may be asked to send your unit to the Cobra factory.It will be necessary to furnish the
following in order to have the product serviced and returned.
1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction
or carbon or a sales receipt. If you send the original receipt it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the unit. Include a typed or clearly print name
and address of where the unit is to be returned.
4. Pack unit securely to prevent damage in transit. If possible, use the original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or
First Class Mail: to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,
6500 West Cortland Street, Chicago, IL 60707 USA.
6. If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged
depending on the model. Please allow approximately 3 to 4 weeks before contacting us for
status. If the unit is out of warranty a letter will automatically be sent informing you of the
repair charge or replacement charge. If you have any questions, please call 773-889-3087
for assistance.
If You Think You Need Service
3
3
4
5
1
Cobra®, Dynamike®, Nothing Comes Close to a Cobra® and the snake design are registered
trademarks of Cobra Electronics Corporation, USA.
Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA.
The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.
2
5.
Operating manual
6.
DC power cord
(not shown)
7.
FCC rules
(not shown)