Compaq 8000 Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito
Compaq 8000 - Elite Convertible Minitower PC Manual
UPC - 884420665106
View all Compaq 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 8000 manual content summary:
- Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 1
Hardware Reference Guide HP Compaq 8000 Elite Convertible Minitower Business PC - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 2
. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Hardware Reference Guide HP Compaq 8000 Elite Convertible Minitower Business PC First Edition (November 2009) Document part number: 588913-001 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 3
About This Book This guide provides basic information for upgrading this computer model. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 4
iv About This Book ENWW - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 5
...29 System Board Drive Connections 30 Installing a 5.25-inch Drive into an External Drive Bay 31 Installing a 3.5-inch SATA Hard Drive into an Internal Drive Bay 32 Removing and Replacing a Removable 3.5-inch SATA Hard Drive 34 Changing from a Minitower to a Desktop Configuration 39 ENWW v - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 6
Changing from a Desktop to a Minitower Configuration 41 Appendix A Specifications Appendix B Battery Replacement Appendix C External Security Devices Installing a Security Lock ...49 HP/Kensington MicroSaver Security Cable Lock 49 Padlock ...50 HP Business PC Security Lock 50 Front Bezel Security - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 7
and software installed in the computer, run the diagnostic utility (included on some computer models only). NOTE: The HP Compaq Convertible Minitower computer can be easily converted to a desktop. For more information, see Changing from a Minitower to a Desktop Configuration on page 39 in this guide - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 8
connector at any time by double-clicking the Realtek HD Audio Manager icon in the Windows taskbar. NOTE: The Power On Light is normally green when the power is on. If it is flashing red, there is a problem with the computer and it is displaying a diagnostic code. 2 Chapter 1 Product Features ENWW - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 9
7 MS PRO/MS PRO DUO ● Memory Stick (MS) ● Memory Stick Select ● Memory Stick PRO ● MagicGate Memory Stick (MG) ● Memory Stick Duo (MS Duo) Duo (MS PRO Duo) ● Memory Stick PRO- ● MagicGate Memory ● Memory Stick PRO HG Duo Duo (MS PRO) ● Memory Stick Micro (M2) (adapter required) 8 1394 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 10
the connector at any time by double-clicking the Realtek HD Audio Manager icon in the Windows taskbar. The monitor connectors on the system board are inactive when a graphics card is installed in the computer. If a graphics card is installed into the PCI, PCI Express x1, or the PCIe x16 slot that is - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 11
the status of the computer and keyboard settings Windows operating system. Refer to Keyboard on page 5 to identify the Windows Logo key. Table 1-5 Windows Logo Key Functions The following Windows Logo Key functions are available in Microsoft Windows XP, Microsoft Windows Vista, and Micorosft Windows - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 12
hides the Start menu Windows Logo Key + d Displays the Desktop Windows Logo Key + m Minimizes all open applications Shift + Windows Logo Key + m Undoes Minimize All Windows Logo Key + e Launches My Computer Windows Logo Key + f Launches Find Document Windows Logo Key + Ctrl + f Launches - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 13
(on numpad) Zooms in Windows Logo Key + - (on numpad) Zooms out Serial Number Location Each computer has a unique serial number and a product ID number that are located on the top cover of the computer. Keep these numbers available for use when contacting customer service for assistance. Figure - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 14
Serviceability Features The computer includes features that make it easy to upgrade and service. No tools are needed for most of the installation procedures described in this chapter. Warnings and Cautions Before performing upgrades be sure to carefully read all of the applicable instructions - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 15
to access the internal computer components in any of the following circumstances: ● Power outage ● Startup failure ● PC component (for example, processor or power supply) failure ● Forgotten password NOTE: The Smart Cover FailSafe Key is a specialized tool available from HP. Be prepared; order this - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 16
secure the Smart Cover Lock to the chassis. Figure 2-1 Removing the Smart Cover Lock Screws You can now remove the access panel. See Removing the Computer Access Panel on page 11. To reattach the Smart Cover Lock, secure the lock in place with the tamper-proof screws. 10 Chapter 2 Hardware Upgrades - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 17
all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 18
Replacing the Computer Access Panel 1. Lay the computer down on its large base for greater stability. 2. Slide the lip on the front end of back end of the access panel onto the unit so that it locks into place (2). Figure 2-3 Replacing the Computer Access Panel 12 Chapter 2 Hardware Upgrades ENWW - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 19
all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 20
drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power front bezel. Figure 2-5 Removing Bezel Blanks from the Subpanel (Desktop Shown) NOTE: When replacing the subpanel, ensure that the - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 21
Replacing the Front Bezel Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1) then rotate the top side of the bezel onto the chassis (2) and snap it into place. Figure 2-6 Replacing the Front Bezel ENWW Replacing the Front Bezel 15 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 22
timing) and CAS latency 9 DDR3 1333 MHz (9-9-9 timing) ● contain the mandatory JEDEC SPD information In addition, the computer supports: ● 512-Mbit, 1-Gbit, and 2-Gbit non-ECC memory technologies ● single-sided and double-sided DIMMs ● DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 23
fourth) White NOTE: A DIMM must occupy the black XMM1 socket. Otherwise, the system will display a POST error message indicating that a memory module must be installed in the wrong socket. The system will automatically operate in single channel mode, dual channel mode, or flex mode, depending on - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 24
in the system. Installing DIMMs CAUTION: You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 25
access panel. 10. Reconnect the power cord and turn on the computer. 11. Lock any security devices that were disengaged when the access panel was removed. The computer should automatically recognize the additional memory the next time you turn on the computer. ENWW Installing Additional Memory 19 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 26
) card must be installed in the PCI Express x16 slot that is NOT downshifted to a x4 slot. To remove, replace, or add an expansion card: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 27
AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Locate the correct Figure 2-10 Opening the Expansion Slot Retainer 8. Before installing an expansion card, remove the expansion slot cover or the existing expansion card - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 28
to scrape the card against other components. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. Figure 2-12 Removing a Standard PCI Expansion Card c. If you are removing a PCI Express x16 card, pull the retention arm on the back of - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 29
it snaps firmly into place. 13. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 14. Replace the computer access panel. 15. Reconnect the power cord and turn on the computer. 16. Lock any security devices that were disengaged when the - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 30
Positions Figure 2-15 Desktop and Minitower Drive Positions Table 2-3 Drive Positions 1 Three 5.25-inch external drive bays for optional drives (optical drives and media card reader shown) 2 Three 3.5-inch internal hard drive bays NOTE: The drive configuration on your computer may be different than - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 31
as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Disconnect the drive cables, as indicated in the following illustrations: CAUTION: When removing the cables, pull - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 32
card reader, disconnect the USB cable from the system board. If the media card reader has a 1394 port, disconnect the 1394 cable from the PCI card. Figure 2-17 Disconnecting the Media Card Reader USB Cable Figure 2-18 Disconnecting the Media Card Reader 1394 Cable 26 Chapter 2 Hardware Upgrades - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 33
out. Figure 2-19 Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive shown) ● To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock mechanism (1) for that specific drive and slide the drive from the drive bay (2). Figure 2-20 Removing a 5.25 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 34
● To remove a hard drive from and internal 3.5-inch drive bay, pull up on the green hard drive drivelock mechanism (1) for that drive and slide the drive from the drive bay (2). Figure 2-21 Removing a Hard Drive 8. Store the removed drive in anti-static packaging. 28 Chapter 2 Hardware Upgrades - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 35
PCI card. ● The system does not support Parallel ATA (PATA) optical drives or PATA hard drives. ● You may install either a third-height or a half-height drive into a half-height bay. ● You must install guide screws to ensure the drive will line up correctly in the drive cage and lock in place. HP - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 36
of work and damage to the computer or drive: If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode. Before handling a drive, ensure that you are discharged - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 37
the new one. CAUTION: Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive. Figure 2-24 Installing a 5.25-Inch Drive in a Minitower (top) and Desktop (bottom) 8. Install the drive in the desired drive bay by sliding it all the way into the front - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 38
power cord and turn on the computer. 13. Lock any security devices that were disengaged when the computer access panel was removed. 14. Reconfigure the computer, if necessary. Installing a 3.5-inch SATA Hard Drive into an Internal Drive Bay NOTE: The system does not support Parallel ATA (PATA) hard - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 39
power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Install four 6-32 isolation mounting guide screws, two on each side of the drive. Figure 2-26 Installing the Hard Drive Guide Screws NOTE: The hard drive uses 6-32 isolation mounting guide - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 40
avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the next available (unpopulated) SATA connector on the system board in the following order: SATA0, SATA1, SATA2, SATA3. 10. Replace the computer access panel. 11. Reconnect the power cord and - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 41
top cover off the carrier (2). Figure 2-29 Removing the Carrier Cover 3. Remove the adhesive strip that secures the thermal sensor to the top of the hard drive (1) and move the thermal sensor away from the carrier (2). Figure 2-30 Removing the Thermal Sensor ENWW Installing Additional Drives 35 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 42
4. Remove the four screws from the bottom of the hard drive carrier. Figure 2-31 Removing the Security Screws 5. Slide the hard drive back to disconnect it from the carrier then lift it up and out of the carrier. Figure 2-32 Removing the Hard Drive 36 Chapter 2 Hardware Upgrades ENWW - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 43
the hard drive is pressed all the way into the connector on the carrier's circuit board. Figure 2-33 Replacing the Hard Drive 7. Replace the four screws in the bottom of the carrier to hold the drive securely in place. Figure 2-34 Replacing the Security Screws ENWW Installing Additional Drives 37 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 44
carrier to secure the cover in place (2). Figure 2-36 Replacing the Carrier Cover 10. Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided. NOTE: The carrier must be locked for power to be supplied to the hard drive. 38 Chapter 2 Hardware Upgrades ENWW - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 45
Changing from a Minitower to a Desktop Configuration 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 46
, the drivelock will secure it. Repeat this step for each drive. Figure 2-38 Installing a Drive in the Desktop Configuration CAUTION: The bottom 5.25-inch drive bay has a shorter depth than the upper two bays. The bottom bay supports a half-height drive or other device that is no more than 14.5 cm - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 47
the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Remove the front bezel. 7. Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays. ENWW Changing from a Desktop to a Minitower Configuration - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 48
-inch Drives from the Drive Bays (Desktop) 9. Gently slide the drive into the uppermost available bay until it snaps into place. When the drive is properly inserted, the drivelock will secure it. Repeat this step for each drive. Figure 2-41 Installing a Drive in the Minitower Configuration CAUTION - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 49
º) with the logo at the bottom, then snap it back into the bezel. Figure 2-42 Changing from a Desktop to a Minitower Configuration 14. Replace the front bezel and computer access panel. 15. Reconnect the power cord and turn on the computer. 16. Lock any security devices that were disengaged when the - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 50
A Specifications Table A-1 Specifications Desktop Dimensions Height 7.0 in 17.78 cm Width 17.63 in 44.78 cm Depth 17.5 in 44.45 cm Tower Dimensions Height 17.63 in 44.78 cm Width 7.0 in 17.78 cm Depth 17.5 in 44.45 cm Approximate Weight 24.54 lb 11.15 kg Weight Supported ( - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 51
Table A-1 Specifications (continued) Power Supply 115V 230V Operating Voltage Range (STD PS 5.5A @ 115 VAC 2.75A @ 230 VAC 1 This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use in the countries of the European - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 52
the HP spare designated for this product. CAUTION: Before replacing the battery, it is important to back up the computer CMOS drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 53
7. Depending on the type of battery holder on the system board, complete the following instructions to replace the battery. Type 1 a. Lift the battery out of its holder. Figure B-1 Removing a Coin Cell Battery (Type 1) b. Slide the replacement battery into position, positive - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 54
Coin Cell Battery (Type 3) NOTE: After the battery has been replaced, use the following steps to complete this procedure. 8. Replace the computer access panel. 9. Plug in the computer and turn on power to the computer. 10. Reset the date and time, your passwords, and any special system setups using - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 55
features, refer to the Desktop Management Guide and the HP ProtectTools Security Manager Guide (some models) at http://www.hp.com. Installing a Security Lock The security locks displayed below and on the following page can be used to secure the computer. HP/Kensington MicroSaver Security Cable Lock - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 56
Padlock Figure C-2 Installing a Padlock HP Business PC Security Lock 1. Fasten the security cable by looping it around a stationary object. Figure C-3 Securing the Cable to a Fixed Object 50 Appendix C External Security Devices ENWW - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 57
2. Thread the keyboard and mouse cables through the lock. Figure C-4 Threading the Keyboard and Mouse Cables 3. Screw the lock to the chassis using the screw provided. Figure C-5 Attaching the Lock to the Chassis ENWW Installing a Security Lock 51 - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 58
a security screw provided by HP. To install the security screw: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 59
screw hole is located on the left edge of the chassis next to the top hard drive bay. Figure C-8 Installing the Front Bezel Security Screw 9. Replace the access panel. 10. Reconnect the power cord and turn on the computer. 11. Lock any security devices that were disengaged when the access panel was - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 60
or installing electrostatic-sensitive parts: ● Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. HP authorized dealer, reseller, or service provider. NOTE: For more information on static electricity, contact an HP authorized dealer, reseller, or service - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 61
same operating guidelines listed above will still apply. ● Keep liquids away from the computer and keyboard. ● Never cover the ventilation slots on the monitor with any type of material. ● Install or enable power management functions of the operating system or other software, including sleep states - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 62
Safety If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider. Shipping Preparation Follow these suggestions when preparing to ship the computer: 1. Back up the hard drive files on PD discs, tape cartridges, CDs, or USB - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 63
populating sockets 17 specifications 16 microphone connector 2 minitower conversion 41 monitor connector DisplayPort 4 VGA 4 mouse connector 4 N network connector 4 O optical drive cleaning 56 installing 31 precautions 56 removing 25 P PCI card 20, 22 PCI Express card 20, 22 power supply 45 product - Compaq 8000 | Hardware Reference Guide - HP Compaq 8000 Elite Convertible Minito - Page 64
25 PCI card 22 PCI Express card 22 Smart Cover Lock 9 S security cable lock 49 front bezel 52 HP Business PC Security Lock 50 padlock 50 Smart Cover Lock 9 serial connector 4 serial number location 7 shipping preparation 56 Smart Cover Lock 9 specifications computer 44 memory 16 system board drive
Hardware Reference Guide
HP Compaq 8000 Elite Convertible Minitower Business PC