Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 34
Removable Media Assembly
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Removal and Replacement Procedures 2-17 Removable Media Assembly The removable media assembly holds two removable media devices, including a 24X or higher low-profile CD-ROM drive and a 1.44-MB diskette drive. To remove the removable media assembly, 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 3. Disconnect all cables from the CD-ROM and diskette drives. 4. Loosen the captive thumbscrew securing the removable media assembly to the chassis . 5. Lift the removable media assembly from the server . 6. Remove the 1.44-MB diskette drive. See "1.44-MB Diskette Drive" later in this chapter. 7. Remove the 24X or higher low-profile CD-ROM drive. See "24X or Higher Low-Profile CD-ROM Drive Adapter Board" later in this chapter. 1 2 Figure 2-12. Removing the removable media assembly Reverse steps 1 through 7 to replace the removable media assembly. IMPORTANT: When the removable media assembly is removed, the diskette drive and the 24X or higher low-profile CD-ROM drive can be easily removed. See "1.44-MB Diskette Drive" "24X or Higher Low-Profile CD-ROM Drive Adapter Board" later in this chapter.