Compaq dx7500 Computer Setup (F10) Utility Guide
Compaq dx7500 - Microtower PC Manual
 |
View all Compaq dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq dx7500 manual content summary:
- Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 1
Computer Setup (F10) Utility Guide - dx7500 Models HP Compaq Business PC - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 2
Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services Setup (F10) Utility Guide HP Compaq Business PC dx7500 Models First Edition (August 2008) Document Part Number - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 3
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 4
iv About This Book ENWW - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 5
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ...1 Using Computer Setup (F10) Utilities 1 Computer Setup-Main ...2 Computer Setup-Advanced 3 Computer Setup-Power ...4 Computer Setup-Boot ...4 Computer Setup-Exit ...5 Recovering the Configuration Settings 6 ENWW v - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 6
vi ENWW - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 7
date and time. ● Set, view, change, or verify the system configuration, including settings for graphics, audio, storage, communications, and input devices. ● View settings for processor and memory Setup Utility screen: ● Main ● Advanced ● Power ● Boot ● Exit ENWW Computer Setup (F10) Utilities 1 - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 8
- HDD only) ◦ Transfer Mode ● Smart Support - run HDD self-test for selected channel: ◦ SMART Status Check ◦ SMART Short Self-Test ◦ SMART Extended Self-Test (view only) ● Installed Memory ● Memory Bank 1 ● Memory Bank 2 ● Memory Bank 3 ● Memory Bank 4 ● BIOS Revision ● Core Version ● Model Number - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 9
boot ROM of the onboard LAN chip. SATA1 Controller Allows you to disable/enable the SATA1 Controller. SATA1 Controller Mode If SATA1 Controller is enabled, allows you to set the mode to: ● IDE ● AHCI ● RAID Onboard Audio Allows you to set the onboard audio to: ● Auto ● Disabled ● Enabled ENWW - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 10
power loss: ● Stay Off ● Power On ● Auto XD Virtualization Technology Disables/enables XD bit. Allows you to enable/disable Virtualization Technology. Computer Setup-Boot NOTE: Support for specific CD-ROM Group ● Hard Drive Group ● Network Boot Group NOTE: MS-DOS drive lettering assignments - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 11
device priority within CD/DVD drives. Priority Hard Drive Group Boot Specifies boot device priority within hard drives. Priority Network Group Boot Priority Specifies boot device priority within bootable network devices. Computer Setup-Exit NOTE: Support for specific Computer Setup options may - Compaq dx7500 | Computer Setup (F10) Utility Guide - Page 12
Recovering the Configuration Settings To reset all BIOS Setup options to their default values (including options for Ctrl+F10), you must enter F10 Setup mode and press F5. This does not include updates to system date, system time, supervisor password, user password, and CPU frequency multiplier. 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Computer Setup (F10) Utility Guide - dx7500
Models
HP Compaq Business PC