Cub Cadet 25 US Ton Log Splitter - LS 25 CC H Operation Manual
Cub Cadet 25 US Ton Log Splitter - LS 25 CC H Manual
 |
View all Cub Cadet 25 US Ton Log Splitter - LS 25 CC H manuals
Add to My Manuals
Save this manual to your list of manuals |
Cub Cadet 25 US Ton Log Splitter - LS 25 CC H manual content summary:
- Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 1
• Set-Up • Operation • Service • Troubleshooting • Warranty Operator's Manual LS 25 CC & LS 27 CCHP - Log Splitter WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 2
at all times. Throughout this manual, all references to right and left side of the machine are observed from the operating position. Table of Contents Safe Operation Practices 3 Assembly & Set-Up 5 Controls & Operation 7 Service 9 Troubleshooting 11 Replacement Parts 13 Warranty 14 - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 3
Never allow children under 16 years of age to operate this machine. Children 16 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult. 4. Never allow adults to operate this machine without proper - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 4
of the Average Useful Life have the machine inspected annually by an authorized service dealer to ensure that all mechanical and safety systems are working properly and READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 5
or the crate at this time. Only remove straps and/or wood when instructed to do so. 5. Inspect the bottom of the crate for any protruding remove. 6. Remove any loose parts included with the log splitter (i.e. Operator's Manual, etc.). 12. 7. Remove the spring clip and clevis pin from the jack - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 6
may be a slight gap between the dislodger and the weld brackets. This gap is normal. Service the engine with gasoline and oil as instructed in the engine manual packed with your log splitter. Read the instructions carefully. 18. Reattach the log tray to the control valve side of the beam, aligning - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 7
Manual for the location Refer to the Engine Operator's Manual packed with 5. and function of the engine controls. your log splitter for instructions to the oil filter. The horizontal beam lock is located on the beam support latch bracket. 2. Block the front and back of both wheels. See Figure - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 8
service dealer. WARNING! Do not attempt to adjust or modify the control valve or the hydraulic system from its original settings or manufacture in any way. Splitting Wood 1. Start the engine as instructed in the Engine Operator's Manual from the jack stand. 3. Support the tongue and pivot the jack - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 9
11. Reconnect the spark plug wire and start the engine following the instructions in the Engine Operator's manual. 12. Use the control handle to engage the wedge to the tank and hoses with kerosene whenever service is performed on the tank, hydraulic pump or valve is recommended. - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 10
shaft. Taking the log splitter to an authorized service dealer is recommended. NOTE: Never hit the half into place while guiding the three mounting bolts through the holes in the pump support bracket. 10. Secure . 1. Refer to the Engine Operator's manual packed with your log splitter for information - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 11
Troubleshooting 6 Problem Cylinder rod will not move Cause 1. Broken drive shaft. 2. Shipping plugs left Internally damaged cylinder. Leaking Cylinder 1. Worn seals. 2. Scored cylinder. 1. See authorized service dealer. 2. Make certain pump inlet hoses are clear and unblocked. use short, large - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 12
Problem Cause Wood will not service dealer. 4. See authorized service dealer. 5. Make certain reservoir is properly vented. 1. See authorized service dealer. 1. Warm up engine. 2. Replace hydraulic fluid. 3. Replace hydraulic fluid. 4. See authorized service dealer. 12 Section 6 - Troubleshooting - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 13
Hydro Hose 726-0132 Hose Clamp 634-0187 Wheel, 16.0 x 4.8 x 8.0 N/A Spark Plug (See Engine Operator's Manual) N/A Fuel Filter (See Engine Operator's Manual) N/A Air Filter (See Engine Operator's Manual) Cub Cadet Genuine Parts can be ordered through your local authorized Cub Cadet dealer - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 14
by Cub Cadet for use with the product(s) covered by this manual will void your warranty as to any resulting damage. Normal Wear Parts original purchase. HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE, through your local authorized service dealer. To locate the dealer - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 15
de operación cubre distintos modelos. Las características del tractor pueden variar según los modelos. No todas las características en este manual se aplican a todos los modelos de tractor y la máquina que se ilustra aquí puede diferir de la suya. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 16
postal de la Asistencia al Cliente de Cub Cadet se encuentran en esta página. Queremos garantizar su entera satisfacción en todo momento. En este manual, las referencias al lado derecho o izquierdo de la máquina se observan desde la posición del operador. El fabricante del motor es el responsable de - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 17
los observadores, mascotas y niños en posición horizontal o vertical. Siempre opere la máquina desde la(s) zona(s) del operador que se especifican en el manual. Vea la Figura 2-1. j. Deje que la máquina se enfríe por lo menos 5 minutos antes de guardarla. Funcionamiento por lo menos a 10 pies de - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 18
máquina por encima de las 45 mph. Símbolos de seguridad 18. Vea la sección 'Transporte de la máquina rompetroncos' de este manual para consultar las instrucciones de remolque adecuadas después de haber cumplimentado todos los requisitos federales, locales o estatales. Mantenimiento y almacenamiento - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 19
para detectar grapas o astillas de madera sobresalientes y extráigalas. 12. 6. Quite cualquier parte suelta que se incluya con la máquina rompetroncos (el manual del operador, etc.). 7. Retire del gato que está sobre la lengüeta la abrazadera de resorte y el pasador de horquilla y luego gire - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 20
mantenimiento del motor con gasolina y aceite como se explica en el manual del motor que se entregó con la máquina rompetroncos. Lea las conectar el cable de la bujía y arranque el motor según las instrucciones del manual del operador del motor. Use la manija de control para enganchar la cuña en - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 21
: Vigueta Tuerca Figura 4-1 Controles y caracteristicas Operación Controles del motor Arranque y detención del motor Consulte el manual del motor adjunto para ver la Consulte el manual del operador del motor 5. ubicación y el funcionamiento de los controles del embalado con la máquina - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 22
ón de ninguna manera. 3. Opere a través de la válvula de descarga Cómo cortar madera 6. Ponga en marcha el motor como se indica en el manual del operador del motor que se Pasador de horquilla Gato durante más de 5 segundos. 4. Intente regular los valores de la válvula de descarga o de seguridad - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 23
motor antes de realizar cualquier ajuste. Utilice siempre anteojos de seguridad durante el funcionamiento o mientras ajusta o repara este equipo. Motor Consulte el manual de operación del motor embalado con la máquina para ver el mantenimiento del motor. NOTA: Al vaciar el aceite del motor en esta - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 24
de ignición, tales como calentadores de agua, calefactores de ambientes, hornos, secadoras de ropa, estufas, motores eléctricos, etc. 1. Consulte el manual del operador del motor se embarcó con su cortadora de troncos para obtener información sobre el almacenamiento fuera de temporada del motor - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 25
Solución de Problemas 6 Problema Causa Solución La varilla del cilindro no se mueve Velocidad lenta del eje del cilindro durante la extensión o retracción. Cilindro con pérdidas 1. El eje de accionamiento está roto. 2. Se han dejado los tapones de envío en las mangueras hidráulicas. 3. Los - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 26
Problema Causa Solución La madera no se parte o se divide la madera con demasiada lentitud 1. La sección de engranajes pequeños está dañada. 2. La válvula de retención de la bomba tiene pérdidas. 3. Vacío excesivo en la entrada de la bomba. 4. El nivel de aceite es incorrecto. 5. El aceite está - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 27
Notas 13 - Cub Cadet 25 US Ton Log Splitter - LS 25 CC H | Operation Manual - Page 28
de la instalación o el uso de piezas, accesorios o complementos no aprobados por Cub Cadet para usar con el o los productos cubiertos en este manual anulará la garantía respecto a cualquier daño resultante. Se garantiza que las Piezas con Desgaste Normal están libres de defectos en los materiales
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
O
PERATOR
’
S
M
ANUAL
Safe Operation Practices • Set-Up • Operation • Service • Troubleshooting •
Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
LS 25 CC & LS 27 CCHP — Log Splitter
QR Code for
manufacturing
purposes only.
Form No. 769-11721
(June 19, 2016)
NOTE:
This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.