Cub Cadet CS 3310 CS 2210 Operator's Manual

Cub Cadet CS 3310 Manual

Get Cub Cadet CS 3310 PDF manuals and user guides View all Cub Cadet CS 3310 manuals
Add to My Manuals
Save this manual to your list of manuals

Cub Cadet CS 3310 manual content summary:

  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 1
    -Up • Operation • Maintenance • Service • Troubleshooting • Warranty Operator's Manual Model Series CS 2310 Chipper Shredder - Model Series CS 2310 & CS 3310 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 2
    a Chipper Shredder manufactured by Cub Cadet. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 3
    or death. Training 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 2. Be familiar with all controls and their proper
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 4
    wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris. 9. Never operate without the shredder hopper, chipper chute, or chute deflector properly attached to the machine. Never empty or change discharge bag while the engine is
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 5
    all moving parts have Notice machine to cool at least 5 minutes before storing. 9. Always refer to the operator's manual for proper instructions laws and regulations for gas, oil, Resources Code). Other states may nearest engine authorized service dealer or contact the service department, P.O. Box
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 6
    , understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING- ROTATING BLADES Keep hands out of
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 7
    's Manual • One Bag • One Engine Operator's Manual • One Safety Glasses Assembly NOTE: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operating your chipper shredder. Chipper Chute (Model Series CS 3310
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 8
    1. Add oil provided before starting unit for the first time out of the box. 2. Service the engine with gasoline as instructed in the separate engine owner's manual. WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 9
    WARNING: Never operate the chipper shredder with the chipper chute in the raised position. Use the spring latch to lower the chipper chute into the operating position before starting the engine. Lock Rod (Model Series CS 3310 Only) The lock rod is located on the chipper chute support. It is used to
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 10
    Operation 5 WARNING: The operation of any chipper shredder can result in foreign objects being thrown equipped. See Figure 5-1. If the unit has a primer, prime the motor as instructed in the engine operator's manual. NOTE: A warm engine may not require choking or priming. 4. Move throttle control
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 11
    in the "Maintainenance & Adjustments" section of this manual. Chipping WARNING: Never operate the chipper shredder without chipper chute lowered into the operating position. Branches up to two inches (model series CS 2310) or three inches (model series CS 3310) in diameter can be fed into the
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 12
    the pivot points on the chute deflector with light oil once a season. 3. Follow the separate engine manual packed with your unit for engine lubrication instructions. Equipment Care • Clean the chipper shredder thoroughly after each use. • Wash bag periodically with water. Allow to dry thoroughly in
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 13
    shredder blade and chipper blades are sharp. Wear leather work gloves 4. to protect your hands when cleaning out the reduction chamber. 5. If the reduction chamber becomes clogged with debris, the shredder collection bag to the chute deflector, if desired. 2. If attached, remove debris bag. Remove
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 14
    stop. 2. Pivot the shredder screen upward as instructed under the heading Cleaning the Reduction Chamber. 3. Remove the chipper chute support brace from the frame by removing the two hex bolts and saddle washers which secure it. See Figure 7-2A. 7. Install a replacement blade (Part No. 742-0544
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 15
    piece of wood into the chute deflector opening to stabilize the impeller and prevent it from rotating when removing the shredder blade. • • • • Allow the unit to run and clear out all debris for a short time before shutting the unit down before storage. When storing the chipper shredder in an
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 16
    Troubleshooting 8 Problem Cause Remedy Engine Fails to start Engine Chipper blade dull. 1. Move throttle lever to FAST or START position. 2. Connect wire to spark plug. 3. Move choke lever to CHOKE position. 4. Fill tank with clean, fresh gasoline. 5. Prime engine as instructed in Engine Manual
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 17
    Notes 9 17
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 18
    18 Section 9 - Notes
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 19
    Description 942-04050 Shredder Blade 942-0544B Chipper Blade 719-04308 Flail Blade (3 total) 634-04627 10 x 4.0 Pneumatic Wheel Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also
  • Cub Cadet CS 3310 | CS 2210 Operator's Manual - Page 20
    FOR SNOW THROWERS, CHIPPER-SHREDDERS, CHIPPER-SHREDDER VACUUMS, LOG SPLITTERS AND JET SWEEPS The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used in the United States, its possessions and territories, and by MTD Products Limited with
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
O
PERATOR
’
S
M
ANUAL
Safe Operation Practices • Set-Up • Operation •
Maintenance • Service • Troubleshooting •
Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Form No. 769-08249
(June 8, 2012)
Chipper Shredder — Model Series CS 2310 & CS 3310
Model Series CS 2310