Cub Cadet PRO Z 960L KW Owners Manual

Cub Cadet PRO Z 960L KW Manual

Cub Cadet PRO Z 960L KW manual content summary:

  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 1
    Operation Practices 2 Assembly & Set-Up 9 Controls & Operation 13 Service 20 Troubleshooting 28 Replacement Parts 29 Attachments & Accessories 29 Warranties 30 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 2
    instructions in this manual before attempting to operate this machine. Failure to comply with these instructions is used, it should be maintained in effective working order by the operator. In the state of your nearest engine authorized service dealer or contact the service department, P.O. Box
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 3
    . Do not operate the machine while under the influence of operate or service the equipment. Local regulations may alcohol or drugs. further restrict the age , and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 4
    which are not covered in this manual use care and good judgement. Contact your customer service representative for assistance. Slope Operation Children 16 and over should read and understand the instructions and safe operation practices in this manual and on the machine and should be trained and
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 5
    paper or cardboard, not your hands, to search for leaks! Wear gloves and safety glasses. Safely relieve all pressure in the system before performing any work on the system, and make sure that: • The ignition switch is OFF • The key is removed • The engine spark plug wire(s) removed • All connections
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 6
    manual. If the safety interlock system does not function properly, have your machine serviced servicing them. 9. Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working . Maintain or replace safety and instruction labels, as necessary. 15. contact Customer Support for
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 7
    , shields, switches, etc.) in place and working. WARNING! Your Responsibility-Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine. SAVE THESE INSTRUCTIONS! SECTION 2 - IMPORTANT SAFE OPERATION PRACTICES
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 8
    Slope Gauge (OK) Figure 1 15° Slope (TOO STEEP) Figure 2 15° Slope 15° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the dashed line. 2. Locate a vertical object on or behind
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 9
    . Please read this entire manual prior to operating the equipment. It instructs you how to safely and problems or questions concerning the machine, phone your local authorized service dealer or contact us directly. We want to ensure your complete satisfaction at all times. Throughout this manual
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 10
    and secure the seat into place with the hardware as shown in Figure 2-6. 3. Remove the shoulder screw (a) and flange lock nut (b) from manual bag and install the seat lockout bracket (c) as shown in Figure 2-7. (a) (b) Figure 2-9 6. Tilt the seat forward until the recliner bearing plate (c) is
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 11
    counter-clockwise to decrease. See Figure 2-11. Figure 2-14 To vary the lumbar support (700 and 900 series) move the lever on the right of the seat up Grease Points Before operating the tractor, refer to the Service section of this manual to check the lubrication and grease points. Grease and lubricate if
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 12
    in place with the seat prop. Remove the bolts and hex nuts from the manual bag. NOTE: The positive battery terminal is marked POS. (+) (a). The negative hex nut (f). See Figure 2-15. NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery prior to
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 13
    service minder is activated whenever the ignition switch is turned to the "ON" position. Keep a record of the actual hours of operation to assure all maintenance procedures are completed according to the instructions in this Operator's Manual MAXIMUM PERFORMANCE mode when the PTO/deck is being used.
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 14
    seat back. Refer to the Assembly & Set-Up section for instructions on adjusting the lumbar support. Seat Prop (Not Shown) The seat prop is located on Your Machine 1. Before you operate the tractor, study this manual carefully to familiarize yourself with the operation of all the instruments
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 15
    -Up section for instructions on adjusting the seat. Safety Interlock System This machine is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the machine. Contact your authorized Cub Cadet Dealer. • The safety
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 16
    to the practice area. When performing the practice session, the PTO knob should not be engaged. While practicing, operate the tractor at you to operate the controls. Refer to the Assembly & Set-Up section for instructions on adjusting the seat. 3. Move the RH and LH drive control levers inward
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 17
    the above procedure. Stopping the Tractor 1. Move both drive control levers to the neutral position to stop the motion of the tractor. 2. Push the PTO switch downward to the disengaged position. 3. Use the deck lift pedal (a) to raise the deck to its highest position and secure in place with the
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 18
    . 2. Avoid turning downhill if possible. Start at the bottom of a slope and work upward. Always slow down before turning. 3. Use extra care and go slowly when turning downhill. Operating The PTO Operate the PTO as follows: 1. Move the throttle to approximately the midthrottle position. 2. Pull the
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 19
    Standard set-up Stems (Dandelion, Bahia, Buckhorn, etc.) Very Lush &/or tall grass Low cut height (1 to 2") Mulch Material collection Abrasive (sandy), dry Wet Reconfigurable Mower Inner Baffle Installed Removed Discharge Baffle Installed Installed Cutting Blades Gauge Wheels Hi-lift Low = 3
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 20
    Service Maintenance Schedule Check gasoline level Check hydraulic hoses for leaks Check tires & tire pressure Check deck, mower and hydro drive belts Check blades and blade
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 21
    Rotella® T Triple Protection™ 15W40 • Shell Rimula® 15W40 • Reference your engine manual for other approved options Hydrostatic Fluid • Cub Drive System Fluid Plus (Shell TT-SB) • Castrol™ (Syntec®) Edge™ applications, and has excellent lubrication and corrosion protection. SECTION 4 - SERVICE 21
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 22
    Cub Cadet 251H EP grease after every 10 hours of service. • Periodically lubricate all other pivot points with a quality lubricating oil. Engine Refer to the Engine Operator's Manual for all engine maintenance intervals, procedures, specifications and instructions clothing when working near batteries
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 23
    returning to service. Although the of some type of leakage, use Cub Drive System Fluid Plus (Shell instructions provided in the Engine Operator's Manual packed with this manual problems. b. Use a fuel stabilizer for storage between 30 and 90 days: • Read the product manufacturer's instructions
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 24
    fuel in the carburetor has been exhausted. • Referring to the Engine Operator's Manual, drain the fuel from the carburetor bowl. 3. Clean the engine and the engine. The use of water will result in shortened life and reduce serviceability. Removing The Tractor From Storage 1. Check the engine oil. 2.
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 25
    following the normal starting instructions previously provided; then Cub Cadet Service Dealer. Electric PTO Clutch This clutch operates when the engine is running, the operator is in the operator's seat and the PTO is engaged. This electric clutch is a normally trouble free device. If a problem
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 26
    the parking brake. Remove ignition key and both spark plug caps. 2. Remove the PTO belt, (refer to Deck Removal on page 24). 3. To remove the belt the blades. When servicing the mower deck, be careful not to cut yourself on the sharpened blades. 1. Remove the deck as instructed in the Deck Removal
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 27
    Cub Cadet dealer to have the transmission drive belt replaced. Tractor Creeping Creeping is the slight forward or backward movement of the mower when the throttle is on and the drive levers are in the neutral position. If your mower creeps, see your Cub Cadet service dealer. SECTION 4 - SERVICE
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 28
    Troubleshooting Problem Excessive vibration Uneven cut Mower will not mulch grass (If Equipped w/Mulching Kit) Cause 1. Cutting blade loose or unbalanced. 2. Damaged or bent cutting blade. 1. Deck
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 29
    (54" Decks) Deck Belt (60/72" Decks) PTO Belt (54" Deck) PTO Belt (60" Deck) PTO Belt (72" Deck) Drive Belt Hi-Lift Blade Rear Tire Chain Kit 12V Outlet Receptacle Work Light Kit 72" Snow Blade Power Deck Parts Manual (have your full model number and serial number ready). Parts Manual downloads are
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 30
    manual problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have a question regarding your warranty coverage, you should contact the MTD Consumer Group Inc Service Department at 1-800-800-7310 or at http://support written instructions
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 31
    WARRANTED PARTS: The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if MTD Consumer Group Inc demonstrates that the outdoor equipment has been abused, neglected, or improperly maintained, and that such abuse, neglect,
  • Cub Cadet PRO Z 960L KW | Owners Manual - Page 32
    proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator's manual for information on required maintenance and service intervals. The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased or leased and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Printed In USA
Safe Operation Practices • Set-Up • Operation • Service • Troubleshooting
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
O
PERATOR
S
M
ANUAL
Form No. 769-11394A
(March 22, 2016)
Safe Operation Practices
........................................
2
Assembly & Set-Up
..................................................
9
Controls & Operation
.............................................
13
Service
....................................................................
20
Troubleshooting
....................................................
28
Replacement Parts
................................................
29
Attachments & Accessories
..................................
29
Warranties
.............................................................
30
Table of Contents
NOTE:
This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Pro Z Series
500/700/900
Lapbar