D-Link DG-102SP Product Manual

D-Link DG-102SP Manual

Get D-Link DG-102SP PDF manuals and user guides View all D-Link DG-102SP manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DG-102SP manual content summary:

  • D-Link DG-102SP | Product Manual - Page 1
    D-Link DG-102SP VoIP Station Gateway Manual Version 1.10 Building Networks for People
  • D-Link DG-102SP | Product Manual - Page 2
    -Based Management 11 Configuration Using a Console 37 Using the Boot Menu 48 Command Line Interface 56 Technical Specifications 64 Warranty 67 Registration 70 Contacting Technical Support 71 2
  • D-Link DG-102SP | Product Manual - Page 3
    Package Contents Contents of Package: „ D-Link DG-102SP VoIP Station Gateway „ Ethernet Cable (Straight-through CAT5 with RJ-45 connectors) „ 12V/1AA/C Power Adapter If any of the above items are missing, please
  • D-Link DG-102SP | Product Manual - Page 4
    Introduction The D-Link DG-102SP VoIP Station Gateway links traditional telephony networks to IP networks with conventional telephony devices such as analog phones or fax machines. The DG-102SP includes two loop start Foreign Exchange Subscriber (FXS) that interfaces with normal RJ-11 telephone
  • D-Link DG-102SP | Product Manual - Page 5
    Features and Benefits Designed for versatility and performance, the DG-102SP VoIP Gateway provides the following features: „ Two „ Command port for easy configuration „ Remote Software download/update „ IP sharing support to allow multiple users access to the Internet via a single IP address „
  • D-Link DG-102SP | Product Manual - Page 6
    ; otherwise, it is unlit. „ Status: This LED will flash quickly when the DG-102SP is either performing a self test or booting up. The LED will remain lit when the SIP server. „ WAN: This LED displays the connection speed, link status, and activity on the 10/100 dual-speed Ethernet port that is used
  • D-Link DG-102SP | Product Manual - Page 7
    1 to 2: Lights when standard phone port is in use. Note: If a powered-up device is connected to a port and the port's Link/Act status indicator is unlit, the most probable cause is a cabling or connection problem (for example, wrong cable type or bad contact) or a device malfunction. Rear Panel 7
  • D-Link DG-102SP | Product Manual - Page 8
    Getting Started Identifying External Components „ AC Power Connector: For the included power adapter. Be sure to use only the 12V1/A power adapter included with the product. Using the wrong power adapter can damage the product and void the warranty. „ Diagnostic Port: An RS-232 serial port used to
  • D-Link DG-102SP | Product Manual - Page 9
    requires a straight-through cable when connecting to a computer. make sure that your IP address on your Ethernet card is in the same subnet as the DG-102SP otherwise it will not connect Connecting the VoIP Gateway to a Hub/Switch To connect the device to either a hub or switch, you must connect the
  • D-Link DG-102SP | Product Manual - Page 10
    Configuration Configuring the VoIP Gateway There are two ways to configure the VoIP gateway: „ Using a web browser on a computer connected to the device via the WAN or LAN Ethernet connections. In the discussion below, the computer running the browser is referred to as the management station. „
  • D-Link DG-102SP | Product Manual - Page 11
    Management The DG-102SP VoIP Gateway may vary with the screen shots (pictures) in this guide. Note: This Web-based Management Module does not accept manually through a console. See the Configuring the VoIP Gateway using a Web Browser section of the "Configuration" section for specific instructions
  • D-Link DG-102SP | Product Manual - Page 12
    below: Restart Settings „ Get IP From: Select the method the VoIP gateway will use to obtain its IP settings once it is rebooted. Choices include: Manual: When Manual is selected, the VoIP gateway will obtain its IP settings from the fields located just below. 12
  • D-Link DG-102SP | Product Manual - Page 13
    . „ Host Name: This is a user-defined host name for this VoIP Gateway. „ MAC Cloning: Enter the MAC address for MAC Cloning. (This function is not supported on this version) PPPoE Settings (for DSL users) „ State: Enables or disables the PPPoE function. „ User Name: Enter the User Name for the PPPoE
  • D-Link DG-102SP | Product Manual - Page 14
    Using Web-Based Management Device Information The items on this window are described below: „ Device Type: This displays the model name of this device. „ MAC Address: This displays the MAC address of this device. „ Boot PROM Version: This displays the version number of the device's startup code. „
  • D-Link DG-102SP | Product Manual - Page 15
    Using Web-Based Management Telephony Configuration Telephony Configuration window Enter the desired information on the window above and then click Save. SIP Configuration - Server SIP Configuration window 15
  • D-Link DG-102SP | Product Manual - Page 16
    below: „ IP Address: Enter the IP address of SIP server. „ Port: Enter the port number of SIP server (Default is 5060). „ Service Domain: This is a user-defined service domain for SIP server. „ URL Format: This is a user-defined URL format for SIP server. „ User Parameter: This is used to enable
  • D-Link DG-102SP | Product Manual - Page 17
    Using Web-Based Management SIP Configuration - User Agent SIP Configuration - User Agent window The items on this window are described below: „ Same Phone Number: Enable or disable the same phone number function. „ Index: Choose the Phone 1 or Phone 2. „ Phone Number: This is a user-defined phone
  • D-Link DG-102SP | Product Manual - Page 18
    SIP Configuration - Peer to Peer window This window displays the Peer to Peer setting for non-SIP server mode. It lists the ten numbers, which support Peer to Peer communication. Click one of the ten pointer icons to access and edit the second SIP Configuration-Peer to Peer window: 18
  • D-Link DG-102SP | Product Manual - Page 19
    Using Web-Based Management SIP Configuration - Peer to Peer Second SIP Configuration - Peer to Peer window The items on this window are described below: „ Index: Choose the index number that you would like to edit (Form 1 to 10). „ Phone Number: This is a user-defined dialing phone number of the
  • D-Link DG-102SP | Product Manual - Page 20
    Using Web-Based Management Dynamic IP Assignment Dynamic IP Assignment window Use the Dynamic IP Assignment to configure the device to act as a DHCP server for the LAN. The items on this window are described below: „ Start IP Address: This is the base (starting) address for the IP pool of unassigned
  • D-Link DG-102SP | Product Manual - Page 21
    Using Web-Based Management Dynamic IP Assignment „ Leased Time: This specifies the amount of time (in hours) a client can lease an IP address from the dynamically allocated IP pool. „ DNS Server IP: This specifies the Domain Name System server, used by the DHCP clients using leased IP addresses, to
  • D-Link DG-102SP | Product Manual - Page 22
    Using Web Based Management DHCP Configuration - Static IP Assignment The Static IP Assignment functions in the same way as the Dynamic IP Assignment. The only difference is that a particular IP address can be assigned to a particular host. The host is identified by the MAC Address of its NIC which
  • D-Link DG-102SP | Product Manual - Page 23
    Using Web-Based Management NAT Configuration NAT Configuration window After entering the desired information into the window above, enable or disable the NAT Function and then click Save. 23
  • D-Link DG-102SP | Product Manual - Page 24
    Using Web-Based Management Local Server Configuration First Local Server Configuration window This window allows you to view the current local server configuration settings. Click the Edit icon on the window above to access the second Local Server Configuration window: 24
  • D-Link DG-102SP | Product Manual - Page 25
    Using Web-Based Management Local Server Configuration Second Local Server Configuration Window The items on this window are described below: „ Index: Choose the index number that you would like to edit (From 1 to 6). „ Protocol: Choose either the TCP or UDP protocol. „ Global Port: Enter the
  • D-Link DG-102SP | Product Manual - Page 26
    Using Web-Based Management SNMP Trap Configuration SNMP Trap Configuration window The items on this window are described below: „ Trap Manager IP Address: The IP address of the trap receiving station. „ Community Name: A user-defined SNMP community name. „ SNMP AuthTrap: This allows you to enable or
  • D-Link DG-102SP | Product Manual - Page 27
    Using Web-Based Management Administration Management Administration Management window To add or change a User Account, fill in the appropriate information in the User Name, Old Password (if applicable), New Password, and Confirm New Password fields. Click on the Save button to keep the settings. 27
  • D-Link DG-102SP | Product Manual - Page 28
    Using Web-Based Management Ethernet Statistics Ethernet Statistics window The items on this window are described below: „ Rx Packets: The total number of packets received by the device. „ Rx Bytes: The total number of bytes contained in packets received by the device. „ Rx Non Ucast Packets: The
  • D-Link DG-102SP | Product Manual - Page 29
    Using Web-Based Management Ethernet Statistics „ Rx Collision Errors: The number of collision errors. „ Rx Short Frames: The number of packets smaller than the 64-octet minimum. „ Rx CRC Errors: The number of packets received that failed the CRC checksum test. „ Rx Overrun Packets: The number of
  • D-Link DG-102SP | Product Manual - Page 30
    Using Web-Based Management DSP Statistics DSP Statistics window This window displays a variety of DSP statistics. 30
  • D-Link DG-102SP | Product Manual - Page 31
    Using Web-Based Management Tcid Configuration Tcid Configuration window This read-only window displays a variety of Tcid configuration settings. 31
  • D-Link DG-102SP | Product Manual - Page 32
    Using Web-Based Management Coding Profile Coding Profile window This read-only window displays various Coding Profile settings. 32
  • D-Link DG-102SP | Product Manual - Page 33
    and Configuration Update window The items on this window are described below: „ Software Update Mode: This specifies downloading the image file through a WAN Link. „ TFTP Server Address: The IP address of the TFTP server where the runtime or configuration file is located. This entry is used only if
  • D-Link DG-102SP | Product Manual - Page 34
    Using Web-Based Management Save Changes Save Changes window After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear all
  • D-Link DG-102SP | Product Manual - Page 35
    Using Web-Based Management Factory Reset Factory Reset to Default Value window Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is complete, all of the device's settings stored in NVRAM will be erased and restored to the values present when
  • D-Link DG-102SP | Product Manual - Page 36
    Using Web-Based Management Restart System Restart System window To perform a reboot of the device, which resets the system, click the Restart button. 36
  • D-Link DG-102SP | Product Manual - Page 37
    Configuration Using a Console Setting up a Console First-time configuration can be carried out through a "console," that is, either (a) a VT100-type serial data terminal, or (b) a computer running communications software set to emulate a VT100. The console must be connected to the Diagnostics port.
  • D-Link DG-102SP | Product Manual - Page 38
    Configuration Using a Console Setting up a Console A typical console connection is illustrated below: Example of a Console Connection Configuring the VoIP Gateway Using Telnet Once you have set an IP address for your device, you can use a Telnet program (in a VT-100 compatible terminal mode) to
  • D-Link DG-102SP | Product Manual - Page 39
    Configuration Using a Console Console Usage Conventions „ The up and down arrow keys, the left and right arrow keys, the Tab key, and the Backspace key can be used to move between selected items. It is recommended that you use the Tab key and Backspace key for moving around the console. „ Items in
  • D-Link DG-102SP | Product Manual - Page 40
    Configuration Using a Console Configuration Settings In order for the VoIP to function, you must provide the device with the following information: „ Where the device receives its IP settings from. „ IP settings - IP Address, Subnet Mask, and Default Gateway All of these settings are found in the
  • D-Link DG-102SP | Product Manual - Page 41
    the key to select the method that the VoIP gateway will use to obtain its IP settings once it is rebooted. Choices include: Manual: When Manual is selected, the VoIP gateway will obtain its IP settings from the fields located just below. BOOTP: When BOOTP is selected, the VoIP gateway will
  • D-Link DG-102SP | Product Manual - Page 42
    Configuration Using a Console Configuring the VoIP Gateway Using a Web Browser The VoIP gateway comes with a default IP address of 10.1.1.1. You must make sure your computer is in the same Subnet as the VoIP gateway. You can do this by changing the IP address of the computer using the screen shown
  • D-Link DG-102SP | Product Manual - Page 43
    Configuration Using a Console Configuring the VoIP Gateway Using a Web Browser Click on the Login to the web-based management module button in the middle of the window. The following window will be displayed: Initially, the VoIP gateway does not have a Username or Password. To log in, simply click
  • D-Link DG-102SP | Product Manual - Page 44
    Configuration Using a Console Configuring the VoIP Gateway Using a Web Browser To begin configuring the device, click on the Config IP folder on the left-hand side of the window (shown below). Next, click on Config Device IP Address. The following window will appear: Configure Device IP Address
  • D-Link DG-102SP | Product Manual - Page 45
    obtain its IP settings once it is rebooted. Choices include: Manual: When Manual is selected, the VoIP gateway will obtain its IP settings from MAC Cloning: Enter the MAC address for MAC Cloning. (This function is not supported on this version) PPPoE Settings (for DSL users) „ State: Enables or
  • D-Link DG-102SP | Product Manual - Page 46
    below: „ IP Address: Enter the IP address of SIP server. „ Port: Enter the port number of SIP server (Default is 5060). „ Service Domain: This is a user-defined service domain for SIP server. „ URL Format: This is a user-defined URL format for SIP server. „ User Parameter: This is used to enable
  • D-Link DG-102SP | Product Manual - Page 47
    Configuration Using a Console Configuring the VoIP Gateway Using a Web Browser „ Session Expires: Enter the timer of Expires. „ Min-SE: Enter the timer of Min-SE. „ Session Expires Refresher: Choose the session expires refresher: uac or uas. Click on the Save button at the bottom right of the screen
  • D-Link DG-102SP | Product Manual - Page 48
    Using the Boot Menu To access the Boot Menu, you must first make sure the console is connected to the Diagnostics port (an RS-232 port with a 9-socket D-shell connector and DCE-type wiring) and the appropriate cabling for the connection is being used. Please see the previous section, "Configuration
  • D-Link DG-102SP | Product Manual - Page 49
    Space> key to select the method that the VoIP gateway will use to obtain its IP settings once it is rebooted (restarted). Choices include: Manual: When Manual is selected, the VoIP gateway will obtain its IP settings from the fields located just below. BOOTP: When BOOTP is selected, the VoIP gateway
  • D-Link DG-102SP | Product Manual - Page 50
    Using the Boot Menu Configuring the IP After you have finished, press to save changes to RAM. Next, press the key to return to the Boot Menu. Position the cursor over the Save Changes item and press . This will save the settings to NV-RAM so they will still be present after
  • D-Link DG-102SP | Product Manual - Page 51
    Using the Boot Menu Device Information This screen displays various types of information about the DG-102SP as well as allowing you to enter information pertaining to name, location, and how to reach the person responsible for maintaining the device. Use the
  • D-Link DG-102SP | Product Manual - Page 52
    Using the Boot Menu Device Information „ System Contact: This is user-defined contact information for the person or department responsible for the maintenance of this device. „ Serial Number: This displays the serial number of this device „ Country Code: This is a user-defined country code for this
  • D-Link DG-102SP | Product Manual - Page 53
    Each item on the Update Boot and Application screen is described below: „ Software Update Mode: This specifies downloading the image file through a WAN Link. „ TFTP Server Address: The IP address of the TFTP server where the runtime or configuration file is located. This entry is used only if
  • D-Link DG-102SP | Product Manual - Page 54
    Using the Boot Menu Save Changes Boot Menu-Saving Settings screen After the settings have been saved to NV-RAM, they will become the default settings for the device, and they will be used every time it is powered on, reset, or rebooted. The only exception to this is a factory reset, which will clear
  • D-Link DG-102SP | Product Manual - Page 55
    Using the Boot Menu Factory Reset Boot Menu-Factory Reset screen Restart System To perform a system reset, use the arrow keys to highlight the last menu item on the Boot Menu, Restart System, and press . The following Reboot Device screen will be briefly displayed: Boot Menu-Restart System
  • D-Link DG-102SP | Product Manual - Page 56
    Command Line Interface The DG-102SP VoIP Gateway offers a line-at-a-time prompt and response scheme to execute various configuration instructions. The interface displays a single prompt character ggdbg> when it is ready to accept a command (ex. ggdbg>set or ggdbg>show). Typing a question mark after
  • D-Link DG-102SP | Product Manual - Page 57
    Command Line Interface General Setup Commands nwdbg un Definition: This command sets the username if there is a username string, or shows the username/password if only nwdbg un is typed. Parameter(s): characters>
  • D-Link DG-102SP | Product Manual - Page 58
    mac Definition: This command sets the MAC address of the voice link, or shows the MAC address if only nwdbg mac is typed. Parameter(s): mode is used to set the device's IP address and upgrade the software. Manual: While the system is booting, the system uses a fixed IP address.
  • D-Link DG-102SP | Product Manual - Page 59
    ip Definition: This command sets the fixed IP address, which is used as the system's IP address if the software boot mode is Manual mode. If only nwdbg ip is typed, this command shows the IP configuration. Parameter(s): Example: nwdbg ip 10.1.1.120 nwdbg mask
  • D-Link DG-102SP | Product Manual - Page 60
    Commands nwdbg tftp Definition: This command sets the software download link to either a WAN link or a LAN link. If only nwdbg tftp is typed, this command shows the download link. Parameter(s): Example: nwdbg tftp 0 nwdbg ca Definition: This
  • D-Link DG-102SP | Product Manual - Page 61
    Command Line Interface General Setup Commands nwdbg dns Definition: This command turns on/off the DNS function. If only nwdbg dns is typed, this command shows the DNS IP/STATE. Parameter(s): [disable | enable] Example: nwdbg dns disable nwdbg country Definition:
  • D-Link DG-102SP | Product Manual - Page 62
    Command Line Interface General Setup Commands ping Definition: This command lets the user ping an IP address from the device. Parameter(s):
  • D-Link DG-102SP | Product Manual - Page 63
    Command Line Interface TFTP Client Setup Commands tftp srvip Definition: This command sets the IP address of the TFTP server. The image must be resident on that TFTP server. If the IP address is invalid, the message ERROR will be displayed. Example: ggdbg>tftp srvip 172.16.6.245
  • D-Link DG-102SP | Product Manual - Page 64
    (MDI-X) „ IEEE 802.3 10BASE-T Ethernet compliance „ IEEE 802.3u 100BASE-TX Fast Ethernet compliant Quality of Service „ Voice service is prioritized over the data traffic. FAX Support „ V.21, V.27ter, V.29, V.17 Modulation/Demodulation. Network Protocols „ TCP/IP, UDP, ARP, ICMP, TFTP, Telnet, SNMP
  • D-Link DG-102SP | Product Manual - Page 65
    Handshake Authentication Protocol (PAP/CHAP) „ Administrative password through Telnet, Console, Web and SNMP LEDs General „ Power „ Status Ethernet „ WAN: 10/100M, Link/Act „ LAN: 10/100M, Link/Act Line „ Hook/Ringing Phone 1 to 2 „ Hook/Ringing Dimensions „ 223.3(W) x 131.7(D) x 35(H) mm 65
  • D-Link DG-102SP | Product Manual - Page 66
    Technical Specifications Number of Ports „ One 10/100BASE-TX Fast Ethernet port (WAN) „ One 10/100BASE-TX Fast Ethernet port (LAN) „ Two loop-start FXS RJ-11 ports „ One PSTN POTS RJ-11 port for Life Line „ One RS-232C, DB-9 Console port Power Supply „ AC-to-DC power adapter (provided) „ DC Input:
  • D-Link DG-102SP | Product Manual - Page 67
    defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link's sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part
  • D-Link DG-102SP | Product Manual - Page 68
    on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty. Disclaimer of Other
  • D-Link DG-102SP | Product Manual - Page 69
    such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However,
  • D-Link DG-102SP | Product Manual - Page 70
    Registration Register online your D-Link product at http://support.dlink.com/register/ 70
  • D-Link DG-102SP | Product Manual - Page 71
    over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:[email protected] Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 7:30am to 12:00am
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
Manual
Building Networks for People
D-Link DG-102SP
VoIP Station Gateway
Version 1.10