D-Link DGE-500SX User Guide
D-Link DGE-500SX Manual
 |
View all D-Link DGE-500SX manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DGE-500SX manual content summary:
- D-Link DGE-500SX | User Guide - Page 1
DGE-500SX Giga-Ether Adapter User's Guide Rev. 01 (September, 1999) 6DGE500SX.01 Printed in Taiwan RECYCLABLE - D-Link DGE-500SX | User Guide - Page 2
translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as manual, must be sent to a D-Link office. To obtain an RMA number for warranty service as to a hardware product, or to obtain warranty service as to a software product, contact the D-Link - D-Link DGE-500SX | User Guide - Page 3
OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD. LIMITATION OF LIABILITY IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF COVER OR OTHER INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT THE - D-Link DGE-500SX | User Guide - Page 4
you for choosing the D-Link DGE-500SX Giga-Ether adapter for PCI Bus-equipped personal computers. The DGE-500SX is ideal for speeding 4.0 (Service Pack 5) Windows NT 2000 Beta 3 Linux OS Kernel v2.0/2.2 Novell Netware v3.12, Support Pack 312PTD Novell Netware v3.2 Novell Netware v4.11, Support Pack - D-Link DGE-500SX | User Guide - Page 5
and writing of data. VLAN The DGE-500SX supports IEEE 802.1Q VLAN tagging and filtering at the chip level, VLAN identification information. VLANs can increase the efficiency and provide extra security for your network. Product Features Designed for versatility and performance, the DGE-500SX adapter - D-Link DGE-500SX | User Guide - Page 6
freeing it for other tasks. • Supports IEEE 802.1Q VLAN specifications, with memory for up to 16 VLANs. • Multi-mode SC Optical Fiber indicators: Full Duplex, Link and Transmit / Receive, 1000Mbps. • Driver† support for: √ Windows 95 (NDIS3) √ Windows NT 4.0 (NDIS4) √ Linux OS Kernel v2.0/2.2 √ - D-Link DGE-500SX | User Guide - Page 7
Guide, ascertain that you have: • One DGE-500SX Giga-Ether Adapter Card. • One DGE-500SX Software CD-ROM. Installing the Adapter the CMOS Setup utility, and manually assign a non-conflicting Interrupt Number and service. Software Installation Windows NT v4.0 1. Make sure the network adapter has - D-Link DGE-500SX | User Guide - Page 8
6. Click "OK" and Windows NT 4.0 will copy the files from the driver disk. 7. After the file has been copied, click "Properties" and modify the DGE-500SX configuration (see below). 8. Click "OK" after making the configuration setting changes. Windows NT 4.0 will then ask you to reboot the PC. Select - D-Link DGE-500SX | User Guide - Page 9
ones on the installation disk are older than those already on your system. 8. Specify "SLOT" and "Node Address" if necessary. 9. Select "Save parameters and load driver" after configuring the adapter settings (see below). 8 - D-Link DGE-500SX | User Guide - Page 10
windows. 5. Specify "SLOT" and "Node Address" if necessary. 6. Select "Save parameters and load driver" after configuring the adapter settings. The NetWare server will now automatically load/bind the driver. Next, you will need to modify your NetWare 5.0 Server's Autoexec file. To do so, please - D-Link DGE-500SX | User Guide - Page 11
parameter causes the DLKGE to auto negotiate the duplex mode and link speed with the device being connected. TXDMATHRESHOLD - The TXDMATHERESHOLD Systems (NOSs) supported, detailed driver‡ software installation instructions are given in README.TXT files on the DGE-500SX Software Diskette/CD-ROM - D-Link DGE-500SX | User Guide - Page 12
in Full-Duplex mode. • 1000M The LED indicator lights green when a 1000 Mbps device is connected to the adapter. • Link Steady green indicates good linkage between the DGE- 500SX and its supporting server or switch. • TX/RX Flashing green indicates activity (transmitting or receiving) within the - D-Link DGE-500SX | User Guide - Page 13
Specifications Jumperless Hardware Media interface: Optical Fiber Transceiver SC Connector EMI Certifications: • FCC Class B • CE Certification Class B • VCCI Class B and C-Tick Host interface: PCI Bus (Bus Master) I/O base address assigned by Plug and Play system Interrupt Number Assigned by Plug - D-Link DGE-500SX | User Guide - Page 14
, NSW 2069, Australia TEL: 61-2-9417-7100 FAX: 61-2-9417-1077 TOLL FREE: 1800-177-100 (Australia), 0800-900900 (New Zealand) WEB: www.dlink.com.au E-MAIL: [email protected] D-LINK CANADA 2180 Winston Park Drive, Oakville, Ontario L6H 5W1 Canada TEL: 1-905-829-5033 FAX: 1-905-829-5223 WEB: www
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
DGE-500SX
Giga-Ether Adapter
User’s Guide
Rev. 01 (September, 1999)
6DGE500SX.01
Printed in Taiwan
RECYCLABLE