D-Link DGS-1008TL Manual
D-Link DGS-1008TL Manual
 |
View all D-Link DGS-1008TL manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DGS-1008TL manual content summary:
- D-Link DGS-1008TL | Manual - Page 1
DGS-1008TL 8-Port 10/100/1000Mbps Gigabit Ethernet Switch Manual RECYCLABLE Rev.1.20 29071600GS08010 - D-Link DGS-1008TL | Manual - Page 2
TABLE OF CONTENTS ABOUT THIS MANUAL ...1 TERMS ...1 OVERVIEW OF THIS MANAUL 1 INTRODUCTION ...2 GIGABIT ETHERNET TECHNOLOGY 2 SWITCHING TECHNOLOGY ...3 FEATURES ...5 IEEE802.1P 10 IDENTIFYING EXTERNAL COMPONENTS 11 FRONT PANEL ...11 LED INDICATORS...11 REAR PANEL ...13 TECHNICAL SPECIFICATIONS 14 - D-Link DGS-1008TL | Manual - Page 3
MANUAL This manual will tell you how to install your D-Link DGS-1008TL 8-Port 10/100/1000Mbps Gigabit Ethernet Switch, and how to connect it to your Gigabit Ethernet network. Terms For simplicity, this documentation uses the terms "Switch" (first letter upper case) to refer to the DGS-1008TL 8-Port - D-Link DGS-1008TL | Manual - Page 4
the DGS-1008TL 8-Port 10/100/1000Mbps Gigabit Ethernet Switch, as well as giving some background information about Gigabit Ethernet and switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet, utilizing the same packet structure, format, and support - D-Link DGS-1008TL | Manual - Page 5
Switching Technology Switching is a cost-effective way of increasing the total network capacity available to users on a LAN. If an Ethernet network begins to display symptoms of congestion, low throughput, slow response times, and high rates of collision, installing a switch to a network can - D-Link DGS-1008TL | Manual - Page 6
networks, a switch is an effective way of eliminating the problem of chaining hubs beyond the "two-repeater limit." A switch beyond the 205-meter network diameter limit for 100BASE-TX networks. Switches supporting both traditional 10Mbps Ethernet, 100Mbps Fast Ethernet, 1000Mbps Gigabit Ethernet are - D-Link DGS-1008TL | Manual - Page 7
Features The DGS-1008TL 8-Port 10/100/1000Mbps Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. „ Eight 10/100/1000Mbps Auto-negotiating, Auto-MDI/MDIX Ethernet ports „ Full/ - D-Link DGS-1008TL | Manual - Page 8
1P AND QOS The DGS-1008TL Switches support 802.1p priority queuing Quality of Service. The implementation of QoS (Quality of Service) and benefits of can be saved. The Switch has separate hardware queues on every physical port to which packets from various applications are mapped to and assigned a - D-Link DGS-1008TL | Manual - Page 9
priority setting for the Switch. Class-1 has the higher priority than Class-0 on the Switch. In order to implement QoS, the user is required to instruct the Switch to examine the header of a packet to see if it has the proper identifying tag tagged. Then the user may forward these tagged - D-Link DGS-1008TL | Manual - Page 10
carton should contain the following items: „ One DGS-1008TL 8-Port 10/100/1000Mbps Gigabit Ethernet Switch „ Accessory pack: 2 mounting brackets and screws „ Four rubber feet with adhesive backing „ One AC power cord „ Quick Installation Guide „ This manual If any item is missing or damaged, please - D-Link DGS-1008TL | Manual - Page 11
Switch can be performed using the following steps: „ The surface must support at least 5 kg (11.02 lbs). „ The power outlet not place heavy objects on the Switch. Desktop or Shelf Installation When installing the DGS-1008TL on a desktop or shelf, the rubber feet included with the device must be - D-Link DGS-1008TL | Manual - Page 12
Rack Installation The Switch can be mounted in an EIA standard size, 19-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets on the switch's front panel (one on each side) and secure them with the screws provided. Attaching the mounting - D-Link DGS-1008TL | Manual - Page 13
Ethernet ports of 10/100/1000Mbps AutoNegotiation. „ Comprehensive LED indicators that display the conditions of the Switch and status of the network. A description of these LED indicators follows (see LED Indicators). LED Indicators The LED indicators of the DGS-1008TL include Power, Link/Act - D-Link DGS-1008TL | Manual - Page 14
green light indicates the switch is power on. Per port: „ Link/Act: A steady green light indicates that the corresponding port is connected and a valid link is established. This will blink green when there is activity on the port. „ 1000Mbps: The steady green light indicates that the corresponding - D-Link DGS-1008TL | Manual - Page 15
Rear Panel The rear panel of the Switch „ AC Power Connector This is a three-pronged connector that supports the power cord. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz. 13 - D-Link DGS-1008TL | Manual - Page 16
TECHNICAL SPECIFICATIONS General Standards: Protocol: Data Transfer Rate: Topology: Network Cables: Number of Ports: IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T CSMA/CD /TIA-568 100-ohm screened twisted-pair (STP) Eight (8) 10/100/1000Mbps Auto-Negotiating Ports 14 - D-Link DGS-1008TL | Manual - Page 17
Physical and Environmental AC inputs: Power Consumption: Operating Temperature: Storage Temperature: Humidity: Dimensions: EMI: Safety: 100 - 240 VAC Universal, 50/60 Hz 10.3 watts maximum 0° ~ 40°C (32°-104° F) -10° ~ 70°C (14°-158° F) 5% ~ 90% RH, non-condensing 11.02 x 7.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
DGS-1008TL
8-Port 10/100/1000Mbps
Gigabit Ethernet Switch
Manual
RECYCLABLE
Rev.1.20
29071600GS08010