D-Link DGS-1016S Quick Install Guide

DGS-1016S

Quick Install Guide

16-Port Gigabit Desktop Switch

Thank you for purchasing the DGS-1016S 16-Port Gigabit Desktop Switch. Follow the steps

in this guide to properly set up your switch. Please verify that all the package contents listed

below are available.

If any of the above items are missing, please contact your reseller.

Network

Before You Begin

•

Visually inspect the power adapter and make sure that it is fully secured to the power

socket of the switch.

•

Do not cover the ventilation holes on the sides of the switch, and make sure there is

adequate ventilation around it.

•

Do not place heavy objects on the switch.

•

Place the switch in a cool and dry environment.

Technical Support

Having trouble installing your new product? D-Link’s website contains the latest user documentation and

software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support

through our website or by phone.

United States

Internet:

Canada

Internet:

Copyright ©2020 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other

trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual

product appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.

Version 1.00(NA) | May 28,2020

5402637

Package Contents

•

DGS-1016S 16-Port Gigabit Desktop Switch

• Four rubber feet

• Wall mounting kit

• Power adapter

The DGS-1016S will conserve energy automatically through several methods:

1.

The switch can detect when a connected device is shut down or when there is no Ethernet traffic

and can automatically reduce the power used for that port, cutting power usage substantially.

2.

The switch optimizes power usage for each port for the length of cable connected to it, using only

as much power as is required.

Energy-efficient and Eco-friendly

Power Indicator

- This green indicator light is on when the switch is receiving power;

otherwise, it is off.

Link/Act -

This LED indicator light is green when the port is successfully connected to an

1000Mbps device and will blink as data is transmitted or received.

This LED indicator light is amber when the port is successfully connected to an 100Mbps or

10Mbps device and will blink as data is transmitted or received.

LEDs

Connecting to the Switch

Step 1

Plug the supplied power adapter into the switch and the other end into a power outlet. Verify

the Power indicator is lit on the switch.

Step 2

Connect one end of an Ethernet cable to the device you want to connect to the switch and the

other end into one of the Ethernet ports on the switch. Check the Link lights (LEDs) on both

the switch and the device to verify that the cable is good and that there is a proper connection.

Note:

A Category 5 (or higher) Ethernet cable must be used for 100Mbps or higher operation.

DGS-1016S

Router

Internet

Computer

NAS

Laptop

Two mounting slots are provided on the bottom of the switch for wall mounting. Please make

sure to keep the front panel exposed in order to view the status LEDs. Please refer to the

illustrations:

A.) Mounting on a concrete wall

1. Fix the nylon screw anchors into the concrete wall.

2. Drive the T3 x 15L screws into

the nylon screw anchors.

3. Hook the switch with the mounting holes on the

bottom onto the screws, and it is completed.

B.) Mounting on a wooden wall

1. Drive the T3 x 15 L screws into the wooden wall.

2. Hook the switch with the mounting holes

on the bottom onto the screws.

Wall Mount Installation