D-Link DGS-1100-10MP Reference Guide

D-Link DGS-1100-10MP Manual

Get D-Link DGS-1100-10MP PDF manuals and user guides View all D-Link DGS-1100-10MP manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DGS-1100-10MP manual content summary:

  • D-Link DGS-1100-10MP | Reference Guide - Page 1
    1
  • D-Link DGS-1100-10MP | Reference Guide - Page 2
    DGS-1100 MP/MPP Series Switch Web UI Reference Guide Information in this document is subject to change without notice. © 2015 D-Link Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in
  • D-Link DGS-1100-10MP | Reference Guide - Page 3
    Series Switch Web UI Reference Guide Table of Contents 1. Introduction ...1 Audience ...1 Standard Mode and Surveillance Mode...1 Other Documentation ...1 Conventions ...1 Notes, Notices, and Cautions ...2 2. Product Introduction...3 DGS-1100-10MP ...4 Front Panel ...4 Rear Panel ...4 DGS-1100-10MPP
  • D-Link DGS-1100-10MP | Reference Guide - Page 4
    DGS-1100 MP/MPP Series Switch Web UI Reference Guide 9. PoE Information...37 10. PoE Scheduling ...39 11. Time ...41 Clock Settings ...41 SNTP Settings ...41 12. Surveillance Settings ...43 13. Surveillance Log...46 14. Health Diagnostic ...47 15. Save and Tools ...48 Firmware Information ...48
  • D-Link DGS-1100-10MP | Reference Guide - Page 5
    to configuring and troubleshooting the switch. All the documents are available either from the CD, bundled with this switch, or from the D-Link website. Other documents related to this switch are: • Getting started Guide • D-Link Network Assistant (DNA) User Guide • D-Link DGS-1100 MP/MPP Series
  • D-Link DGS-1100-10MP | Reference Guide - Page 6
    Link DGS-1100 MP/MPP Series Switch User Manual Notes, Notices, and Cautions Below are examples of the three types of indicators used in this manual. When administering your switch and tells you how to avoid the problem. CAUTION: A caution indicates a potential for property damage, personal injury, or death
  • D-Link DGS-1100-10MP | Reference Guide - Page 7
    D-Link DGS-1100 MP/MPP Series Switch User Manual 2. Product Introduction The DGS-1100 MP/MPP series Smart Switch is the world's first PoE switch with ONVIF support. This allows it to recognize ONVIF devices and integrate seamlessly with your surveillance network. Various power budgets, support for
  • D-Link DGS-1100-10MP | Reference Guide - Page 8
    D-Link DGS-1100 MP/MPP Series Switch User Manual DGS-1100-10MP 8-Port 10/100/1000 Mbps + 2-Port SFP 1000 Mbps PoE switch Front Panel Figure 2-1 - DGS-1100-10MP Front Panel Power LED: The Power LED lights up when the switch is connected to a power source. Link/Act/Speed LED (Ports 1-8): Solid Green:
  • D-Link DGS-1100-10MP | Reference Guide - Page 9
    D-Link DGS-1100 MP/MPP Series Switch User Manual Power: The power port is where to connect the AC power cord. CAUTION: The SFP ports should use UL listed Optical Transceiver product, Rated Laser Class I. 3.3Vdc. CAUTION: This equipment is to be connected only to PoE networks without routing to the
  • D-Link DGS-1100-10MP | Reference Guide - Page 10
    D-Link DGS-1100 MP/MPP Series Switch User Manual DGS-1100-10MPP 8-Port 10/100/1000 Mbps + 2-Port SFP 1000 Mbps PoE switch Front Panel Figure 2-3 - DGS-1100-10MPP Front Panel Power LED: The Power LED lights up when the switch is connected to a power source. Link/Act/Speed LED (Ports 1-8): Solid Green
  • D-Link DGS-1100-10MP | Reference Guide - Page 11
    D-Link DGS-1100 MP/MPP Series Switch User Manual Power: Connect the supplied AC power cable to this port. CAUTION: The SFP ports should use UL listed Optical Transceiver product, Rated Laser Class I. 3.3Vdc. CAUTION: This equipment is to be connected only to PoE networks without routing to the
  • D-Link DGS-1100-10MP | Reference Guide - Page 12
    D-Link DGS-1100 MP/MPP Series Switch User Manual DGS-1100-26MP 24-Port 10/100/1000 Mbps + 2-Port Combo 1000BASE-T/SFP PoE switch Front Panel Figure 2-5 - DGS-1100-26MP Front Panel Power LED: The Power LED lights up when the switch is connected to a power source. Link/Act/Speed LED (Ports 1-24):
  • D-Link DGS-1100-10MP | Reference Guide - Page 13
    Link DGS-1100 MP/MPP Series Switch User Manual Figure 2-6 - DGS-1100-26MP Rear Panel Power: Connect the supplied AC power cable to this port. CAUTION: The SFP ports should use UL listed Optical Transceiver product, Rated Laser Class I. 3.3Vdc. CAUTION: This equipment is to be connected only to PoE
  • D-Link DGS-1100-10MP | Reference Guide - Page 14
    D-Link DGS-1100 MP/MPP Series Switch User Manual DGS-1100-26MPP 24-Port 10/100/1000 Mbps + 2-Port Combo 1000BASE-T/SFP PoE switch Front Panel Figure 2-7 - DGS-1100-26MPP Front Panel Power LED: The Power LED lights up when the switch is connected to a power source. Link/Act/Speed LED (Ports 1-24):
  • D-Link DGS-1100-10MP | Reference Guide - Page 15
    Link DGS-1100 MP/MPP Series Switch User Manual Figure 2-8 - DGS-1100-26MPP Rear Panel Power: Connect the supplied AC power cable to this port. CAUTION: The SFP ports should use UL listed Optical Transceiver product, Rated Laser Class I. 3.3Vdc. CAUTION: This equipment is to be connected only to PoE
  • D-Link DGS-1100-10MP | Reference Guide - Page 16
    Contents • One D-Link DGS-1100 MP/MPP Series switch • One AC power cord • Four rubber feet • Screws and two mounting brackets • One accessory kit for a ground screw • One Multi-lingual Getting Started Guide • One CD with User Manual Step 2: Switch Installation For safe switch installation and
  • D-Link DGS-1100-10MP | Reference Guide - Page 17
    Link DGS-1100 MP/MPP Series Switch User Manual CAUTION: Ensure the power cable is disconnected before installing the switch. To install, attach the mounting brackets to the switch switch in the rack. Figure 3-3 - Mount the switch in the rack or chassis Please be aware of following safety Instructions
  • D-Link DGS-1100-10MP | Reference Guide - Page 18
    D-Link DGS-1100 MP/MPP Series Switch User Manual E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the
  • D-Link DGS-1100-10MP | Reference Guide - Page 19
    D-Link DGS-1100 MP/MPP Series Switch User Manual Step 5: Attach the terminal lug ring at the other end of the grounding cable to an appropriate grounding stud or bolt on rack where the switch is installed. Step 6: Verify if the connections at the ground connector on the switch and the rack are
  • D-Link DGS-1100-10MP | Reference Guide - Page 20
    D-Link DGS-1100 MP/MPP Series Switch User Manual 4. Web-based Switch Configuration Management Options Connecting using the Web User Interface Logging onto the Smart Wizard Web User Interface Management Options The switch provides multiple access platforms that can be used to configure, manage and
  • D-Link DGS-1100-10MP | Reference Guide - Page 21
    D-Link DGS-1100 MP/MPP Series Switch User Manual Connect the Ethernet cable to any of the ports on the front panel of the switch and to the Ethernet port on the PC. Logging onto the Web User Interface To access the Web UI, simply open a web browser and enter the switch's default IP address into the
  • D-Link DGS-1100-10MP | Reference Guide - Page 22
    Link DGS-1100 MP/MPP Series Switch User Manual Smart Wizard The Smart Wizard is a configuration utility that is launched the first time the Web UI is accessed. It allows users to configure basic settings such as the switch mode, management IP and password. It can also be used to switch Guide for
  • D-Link DGS-1100-10MP | Reference Guide - Page 23
    D-Link DGS-1100 MP/MPP Series Switch User Manual Click the Exit button to discard the changes made, exit If an IP-Camera is not in the same subnet as the switch, the IP-Camera will not be automatically discovered. Place the switch management IP in the same subnet as the IPCameras for the cameras
  • D-Link DGS-1100-10MP | Reference Guide - Page 24
    D-Link DGS-1100 MP/MPP Series Switch User Manual The fields that can be configured are described below: Parameter Static DHCP IP Address Netmask Gateway Description Select this option to manually configure and use IP address settings on this switch. Select this option to obtain IP address
  • D-Link DGS-1100-10MP | Reference Guide - Page 25
    D-Link DGS-1100 MP/MPP Series Switch User Manual Click the Exit button to discard the changes made, exit other interface, for example: PoE scheduling, SNMP settings and the surveillance VLAN in use. NOTE: Settings are saved between interface types. It is possible to switch interface types and re-run
  • D-Link DGS-1100-10MP | Reference Guide - Page 26
    D-Link DGS-1100 MP/MPP Series Switch User Manual Web User Interface When you complete the Surveillance Mode Smart Wizard you will be presented with the following screen: Figure 4-5 Congratulations window Scroll to the bottom of the page and click the OK button to continue to the Web UI. 22
  • D-Link DGS-1100-10MP | Reference Guide - Page 27
    D-Link DGS-1100 MP/MPP Series Switch User Manual Areas of the User Interface The figure below shows the Main Web UI Window Description The navigation menu is displayed in this area. Click on the links and navigate the folder structure to display information on the main page. This is the main page
  • D-Link DGS-1100-10MP | Reference Guide - Page 28
    D-Link DGS-1100 MP/MPP Series Switch User Manual 5. Surveillance Overview This loads automatically when you log-in to the switch and contains two tabs; Surveillance Topology and Device Information. To return to the Surveillance Overview page after viewing other pages, click the model number of
  • D-Link DGS-1100-10MP | Reference Guide - Page 29
    D-Link DGS-1100 MP/MPP Series Switch User Manual The icon descriptions are as follows: Icon Description ) and enabling 60/70 W PoE, make sure it supports IEEE 802.3bt, as otherwise it will become damaged. See below for more information on enabling and disabling PoE. A breakdown of each device
  • D-Link DGS-1100-10MP | Reference Guide - Page 30
    D-Link DGS-1100 MP/MPP Series Switch User Manual One ONVIF IP-Camera and multiple NVRs discovered on this port. This port is set as uplink port and it is link up. This port is set as uplink port and it is link down. NOTE: A breakdown of the device icons can be found by clicking the Help menu
  • D-Link DGS-1100-10MP | Reference Guide - Page 31
    D-Link DGS-1100 MP/MPP Series Switch User Manual Enabling and Disabling PoE CAUTION: Before connecting the Powered Device (PD) and enabling 60/70 W PoE, make sure it supports IEEE 802.3bt, as otherwise it will become damaged. The power status of each port can be changed by clicking the power icon on
  • D-Link DGS-1100-10MP | Reference Guide - Page 32
    D-Link DGS-1100 MP/MPP Series Switch User Manual Device Information This is the second tab on the Surveillance Overview page and is divided into 3 areas; a device information section, PoE utilization section and bandwidth usage section. To view the following window, click on the model number of the
  • D-Link DGS-1100-10MP | Reference Guide - Page 33
    Link DGS-1100 MP/MPP Series Switch User Manual 6. Port Information The Port Information section provides an overview of the port status for each port. This includes the throughput, PoE The total inbound throughput for all ports on the switch. The total number of ONVIF IP-Cameras detected. The
  • D-Link DGS-1100-10MP | Reference Guide - Page 34
    D-Link DGS-1100 MP/MPP Series Switch User Manual Hover-over each field to get more information about each value. A breakdown of each field is below: Icon Description The port number of the port. The total inbound throughput for the port on the switch (measured in Mbps). The cable length (in
  • D-Link DGS-1100-10MP | Reference Guide - Page 35
    D-Link DGS-1100 MP/MPP Series Switch User Manual Group Details The Group Details page lists the devices connected to a specific port. Only devices that have been recognized as supporting ONVIF or NVRs will be displayed. To view the following window, click on the Port Information link in the
  • D-Link DGS-1100-10MP | Reference Guide - Page 36
    D-Link DGS-1100 MP/MPP Series Switch User Manual The device description. This can be edited on the IP-Camera Information page or NVR Information page. 32
  • D-Link DGS-1100-10MP | Reference Guide - Page 37
    Link DGS-1100 MP/MPP Series Switch User Manual 7. IP-Camera Information The IP-Camera Information section provides information on each camera connected to the switch The total inbound throughput for all ports on the switch. The PoE consumption of the switch. This is listed as one negative integer and
  • D-Link DGS-1100-10MP | Reference Guide - Page 38
    D-Link DGS-1100 MP/MPP Series Switch User Manual The total inbound throughput for the port on the switch (measured in Mbps). The PoE consumption of the port. This is listed as one negative integer and one positive integer. A negative value for PoE means that power is being consumed by the port. The
  • D-Link DGS-1100-10MP | Reference Guide - Page 39
    D-Link DGS-1100 MP/MPP Series Switch User Manual 8. NVR Information The NVR Information section provides information on each NVR connected to the switch. It features the port number, throughput, IP address and information relating to the cameras connected to the NVR, such as the group name, total
  • D-Link DGS-1100-10MP | Reference Guide - Page 40
    D-Link DGS-1100 MP/MPP Series Switch User Manual with NVR1 having Group Number 1. If an NVR is removed, the Group Numbers will be updated accordingly (if NVR1 is removed then Group Number 2 will
  • D-Link DGS-1100-10MP | Reference Guide - Page 41
    D-Link DGS-1100 MP/MPP Series Switch User Manual 9. PoE Information The PoE Information section provides information on the PoE usage of each port. The port number, PoE status, health status, PoE budget and power consumption is listed for each port. It is possible to click on the health status to be
  • D-Link DGS-1100-10MP | Reference Guide - Page 42
    D-Link DGS-1100 MP/MPP Series Switch User Manual Hover-over each field to get more information about each value. A breakdown of each field is below: Icon Description The port number of the port. The PoE status for the port (PoE on or off). The maximum PoE power budget for this port. This can
  • D-Link DGS-1100-10MP | Reference Guide - Page 43
    D-Link DGS-1100 MP/MPP Series Switch User Manual 10. PoE Scheduling PoE Scheduling is a feature which allows you to specify the amount of time that power is delivered to a PoE port. This can be used to save power when devices are not in use, or as a security feature to prevent wireless access from
  • D-Link DGS-1100-10MP | Reference Guide - Page 44
    D-Link DGS-1100 MP/MPP Series Switch User Manual Time Profile The Time Profile created above. Click the Apply button to accept the changes made. 40
  • D-Link DGS-1100-10MP | Reference Guide - Page 45
    D-Link DGS-1100 MP/MPP Series Switch User Manual 11. Time Clock Settings SNTP Settings Clock Settings This sub-menu is used to configure the time on the switch. To view the following window, go to: Time > Clock Settings in the navigation menu: Figure 11-1 Clock Settings Window The fields that can
  • D-Link DGS-1100-10MP | Reference Guide - Page 46
    D-Link DGS-1100 MP/MPP Series Switch User Manual SNTP State Set the SNTP state. Options are Enabled or Disabled. Pool Interval (30-99999) Set the synchronization interval for SNTP. The default is 720
  • D-Link DGS-1100-10MP | Reference Guide - Page 47
    D-Link DGS-1100 MP/MPP Series Switch User Manual 12. Surveillance Settings The Surveillance Settings page is Address Mask Gateway Description Choose how the management IP for this VLAN is assigned to the switch. Options are: DHCP, Static or BOOTP. If Static is chosen, the following fields become
  • D-Link DGS-1100-10MP | Reference Guide - Page 48
    D-Link DGS-1100 MP/MPP Series Switch User Manual The fields that can be configured for the SNMP Host Settings for Uplink Ports. These are used for connecting the surveillance VLAN with other switches. Enter the end port in the range for Uplink Ports. These are used for connecting the surveillance
  • D-Link DGS-1100-10MP | Reference Guide - Page 49
    process is disabled on these ports. Use the Uplink Port Settings section of the interface to define which ports connect to other switches. NOTE: The default uplink ports of the DGS-1100-10MP/10MPP are port9 and port10. The default uplink ports of DGS-1100-26MP/26MPP are port25 and port26. 45
  • D-Link DGS-1100-10MP | Reference Guide - Page 50
    D-Link DGS-1100 MP/MPP Series Switch User Manual 13. Surveillance Log The Surveillance Log consists of a list of Syslog messages that have been generated by the switch. Depending on whether a Syslog server has been defined in the Surveillance Settings section, these may be local to the switch or
  • D-Link DGS-1100-10MP | Reference Guide - Page 51
    D-Link DGS-1100 MP/MPP Series Switch User Manual 14. Health Diagnostic The Health Diagnostic page is linked-to by the Port Information and PoE Information pages and displays an overview of the port status. It contains the port number, Loopback Detection status, Cable Link status, PoE Status, Tx/Rx
  • D-Link DGS-1100-10MP | Reference Guide - Page 52
    D-Link DGS-1100 MP/MPP Series Switch User Manual 15. Save and Tools Firmware Information Firmware Upgrade & Backup Configuration Restore & Backup Reset Reboot System Firmware Information This window is used to show firmware information. To view the following window, click Tools > Firmware
  • D-Link DGS-1100-10MP | Reference Guide - Page 53
    D-Link DGS-1100 MP/MPP Series Switch User Manual Parameter Description Source File Enter the source filename and path of the firmware file located on the local PC. Alternatively click the Browse button to navigate to the location of the firmware file located on the local PC. Click the Upgrade
  • D-Link DGS-1100-10MP | Reference Guide - Page 54
    D-Link DGS-1100 MP/MPP Series Switch User Manual Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. NOTE: If the switch is in HTTPS mode, the firmware or configuration cannot be upgraded using regular
  • D-Link DGS-1100-10MP | Reference Guide - Page 55
    D-Link DGS-1100 MP/MPP Series Switch User Manual Reset This window is used to reset the switch's configuration to the factory default settings. To view the following window, click Tools > Reset, as shown below: Figure 15-6 Reset window Select the The Switch will be reset to its factory defaults
  • D-Link DGS-1100-10MP | Reference Guide - Page 56
    D-Link DGS-1100 MP/MPP Series Switch User Manual Figure 15-8 Reboot System - Rebooting window 52
  • D-Link DGS-1100-10MP | Reference Guide - Page 57
    the D-Link DGS-1100 MP/MPP Series switch and provide some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA
  • D-Link DGS-1100-10MP | Reference Guide - Page 58
    D-Link DGS-1100 MP/MPP Series Switch User Manual network into different segments which won't compete with each other for network transmission capacity. The switch acts as a high-speed selective bridge between the individual segments. The switch, without interfering with any other segments,
  • D-Link DGS-1100-10MP | Reference Guide - Page 59
    Link DGS-1100 MP/MPP Series Switch User Manual 17. Appendix B - Technical Specifications Hardware Specifications Key Components / Performance Switching Capacity: - DGS-1100-10MP: 20Gbps - DGS-1100-10MPP: 20Gbps - DGS-1100-26MP: 52Gbps - DGS-1100-26MPP: 52Gbps Max. Forwarding Rate: - DGS-1100-10MP
  • D-Link DGS-1100-10MP | Reference Guide - Page 60
    D-Link DGS-1100 MP/MPP Series Switch User Manual Asymmetric VLAN Quality of Service (QoS) 802.1p priority 4 queues Bandwidth Control Security Storm Control DoS Attack Prevention SSL D-Link Safeguard DHCP Snooping Management Web-based GUI or D-Link Network Assistant Configuration backup / restoration
  • D-Link DGS-1100-10MP | Reference Guide - Page 61
    D-Link DGS-1100 MP/MPP Series Switch User Manual 18. Appendix C - Rack mount Instructions Safety Instructions - Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions: A) Elevated Operating Ambient - If installed in a closed or
  • D-Link DGS-1100-10MP | Reference Guide - Page 62
    D-Link DGS-1100 Series Switch User Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
1