D-Link DGS-1500-28P Datasheet

D-Link DGS-1500-28P Manual

D-Link DGS-1500-28P manual content summary:

  • D-Link DGS-1500-28P | Datasheet - Page 1
    D-Link Green 3.0 technology help reduce energy use and operating costs. DGS-1500-20/28/28P/52 IP Management (Virtual Stacking) • Built-in SNMP MIB for remote NMS (D-View 6.0) • Inexpensive Gigabit solution for small and medium business VoIP Deployment • Auto Voice VLAN Overview D-Link's DGS-1500
  • D-Link DGS-1500-28P | Datasheet - Page 2
    • IPv6 support • Auto Surveillance VLAN • Port or VLAN-based Loopback detection • Cable Diagnostics • Configurable MDI/MDIX • LLDP/LLDP-MED Trap & Logs • SNMP Trap • Trap for SmartConsole Utility • System Log DGS-1500-20/28/28P/52 SmartPro Switch D-Link Green™ 3.0 Technology D-Link takes the
  • D-Link DGS-1500-28P | Datasheet - Page 3
    L2 network segment that are connected to the user's PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1500 Series also supports D-View 6.0 and a Compact Command
  • D-Link DGS-1500-28P | Datasheet - Page 4
    DGS-1500-20/28/28P/52 SmartPro Switch Technical Specification DGS-1500-20 DGS-1500-28 DGS-1500-28P DGS-1500-52 General -pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) • Auto-negotiation • IEEE 802.3x Flow Control support for Full-Duplex Mode • IEEE 802.3af PoE1
  • D-Link DGS-1500-28P | Datasheet - Page 5
    DGS-1500-20/28/28P/52 SmartPro Switch DGS-1500-20 DGS-1500-28 DGS-1500-28P DGS-1500-52 Physical & Environmental AC Input 100 11.16 lbs 9.04 lbs Diagnostic LEDs Power (Per device) Link/Activity/Speed (Per 10/100/1000 Mbps port) Link/Activity/Speed (Per SFP port) Fan (Per Device)1,2 PoE (
  • D-Link DGS-1500-28P | Datasheet - Page 6
    -One • Supports Mirroring for Tx/Rx/Both • 802.3ad Link Aggregation • DGS-1500-20: Max. 10 groups per device, 8 ports per group • DGS-1500-28/DGS-1500-28P: Max. 14 groups per device, 8 ports per group • DGS-1500-52: Max. 26 groups per device, 8 ports per group • Cable Diagnostics • Configurable MDI
  • D-Link DGS-1500-28P | Datasheet - Page 7
    DGS-1500-20/28/28P/52 SmartPro Switch Security • Port Security • Supports up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control AAA • 802.1X Authentication • Supports local/ RADIUS database • Supports Port-based access control • Supports EAP, OTP, TLS, TTLS, PEAP • IPv6 RADIUS
  • D-Link DGS-1500-28P | Datasheet - Page 8
    DGS-1500-20/28/28P/52 SmartPro Switch Warranty Information Warranty Limited Lifetime3 Ordering Information DGS-1500-20 20-port Gigabit SmartPro Rackmount Switch including 4 SFP ports DGS-1500-28 28-port Gigabit SmartPro Rackmount Switch including 4 SFP ports DGS-1500-28P 28-port Gigabit
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

SmartPro Switch
DGS-1500-20/28/28P/52
Product Highlights
Overview
D-Link’s DGS-1500 Series SmartPro switches are designed for SMBs which need functions
such as Static Routing and Single IP Management (Virtual Stacking). This series integrates
advanced management and security functions that are similar to those of a managed
switch, but less complex. The switches feature D-Link Green™ 3.0 technology which enables
significant power savings.
Management options include SNMP, Web Management, SmartConsole Utility, and Compact
CLI. The series also supports ACL filtering and D-Link’s Safeguard Engine. The DGS-1500-20
and DGS-1500-28 both feature a fanless design. The fanless design emits less noise than a
standard switch, increases the products’ lifetimes, and makes them better suited for office
environments.
Power over Ethernet
The DGS-1500-28P’s 10/100/1000 Mbps ports are PoE-enabled for powering devices such
as IP cameras, VoIP phones and wireless access points. Compliant with 802.3af and 802.3at,
the DGS-1500-28P is capable of providing up to 30 Watts on all ports when paired with
a DPS-700. The DPS-700 enables the DGS-1500-28P to have 1+1 power redundancy and
boosts the total PoE budget to 740 W. By itself, the DGS-1500-28P has a PoE power budget
of 370 W, allowing it to provide up to 15.4 W to all ports simultaneously. Time-based
PoE enables power to a port to be shut off at a scheduled time, reducing power usage
and increasing security by powering off devices that should not be in use during non-
business hours.
Features
Green Technology
• IEEE 802.3az EEE
• Power saving via LED and Port shutoff
• Power saving via Cable Length detection
• Power saving via Link Status detection
• Time-based PoE (DGS-1500-28P only)
Security Features
• Access Control List secures network
• D-Link Safeguard Engine protects CPU from
Broadcast/Multicast/Unicast Flooding
• ARP Spoofing Prevention
• SSL
Intuitive Management
• SmartConsole utility or Web-based GUI
• Single IP Management (Virtual Stacking)
• Built-in SNMP MIB for remote NMS (D-View 6.0)
• Inexpensive Gigabit solution for small and
medium business
VoIP Deployment
• Auto Voice VLAN
L3 Static Routing
Supports Inter-VLAN and static routing for
improved efficiency
Multiple Device Management
Virtual stacking allows management of up to 32 devices
Traffic Prioritization for Voice and Video
Auto Surveillance VLAN (ASV) and Auto Voice VLAN
ensure security and telephone systems have
highest priority.
Energy Efficient Technology
IEEE
802.3az EEE and D-Link Green 3.0 technology help
reduce energy use and operating costs.