D-Link DI-804HV Product Manual

D-Link DI-804HV - Express ENwork Router Manual

Get D-Link DI-804HV - Express ENwork Router PDF manuals and user guides
UPC - 790069250316
View all D-Link DI-804HV manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DI-804HV manual content summary:

  • D-Link DI-804HV | Product Manual - Page 1
    D-Link DI-804HV Broadband Hardware VPN Router Manual Building Networks for People 10/08/04
  • D-Link DI-804HV | Product Manual - Page 2
    Contents Package Contents 3 Introduction ...4 Getting Started 10 Using the Configuration Menu 11 Networking Basics 68 Reset to Factory Default Settings 94 Technical Specifications 95 Frequently Asked Questions 96 Contacting Technical Support 142 Warranty ...143 Registration 146 2
  • D-Link DI-804HV | Product Manual - Page 3
    Contents of Package: n D-Link DI-804HV Broadband Hardware VPN Router n Power Adapter - 5V DC n Ethernet (CAT5-UTP/Straight-Through) Cable n Manual on CD n Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DI-804HV will cause damage and
  • D-Link DI-804HV | Product Manual - Page 4
    Introduction The D-Link DI-804HV is a 4-port Broadband Router with Virtual Private Network (VPN) functionality. It provides a complete solution for in the Quick Installation Guide (included in your package) you will have the ability to share information and resources. The DI-804HV is compatible with
  • D-Link DI-804HV | Product Manual - Page 5
    you to setup VPN server and VPN clients n Firewall Unwanted packets from outside intruders can be blocked to protect your network n DHCP server supported All of the networked computers can retrieve TCP/IP settings automatically from the DI-804HV n Web-based configuration Configurable through any
  • D-Link DI-804HV | Product Manual - Page 6
    and letting them pass or halting them based on the IP address of the source and destination. n Virtual Server supported Enables you to expose WWW, FTP and other services on your LAN to be accessible to Internet users. n User-Definable Application Sensing Tunnel You can define the attributes, for
  • D-Link DI-804HV | Product Manual - Page 7
    security functions based on the type of application or type of port that is being used. For example, a firewall can be configured to work with an FTP or Telnet server. Or a firewall can be configured to work with specific UDP or TCP ports to allow certain applications or games to work properly over
  • D-Link DI-804HV | Product Manual - Page 8
    inside of a packet. IP Security (IPSec) IPSec provides a more secure network-to-network connection across the Internet or a Wide Area Network (WAN). IPSec encrypts all communication between the client and server whereas PPTP only encrypts the data packets. Both of these VPN implementations are used
  • D-Link DI-804HV | Product Manual - Page 9
    LEDS LED stands for Light-Emitting Diode. The DI-804HV has the following LEDs as described below: LED Power M1 the device has an Internet connection A solid light indicates connection on the WAN port. This LED blinks during data transmission COM A solid light indicates a connection to an
  • D-Link DI-804HV | Product Manual - Page 10
    -804HV wireless broadband router (see the Quick Installation Guide included with the DI-804HV.) If you are connecting a desktop computer to your network and you need an Ethernet connection, you can install the D-Link DFE-530TX+ Ethernet adapter into an available PCI slot. (See the Quick Installation
  • D-Link DI-804HV | Product Manual - Page 11
    browser n Type in the IP Address of the DI-804HV (http://192.168.0.1) http://192.168.0.1 Note: If you have changed the default IP Address assigned to the DI-804HV, make sure to enter the correct IP Address. The factory default User name is admin and the default Password is blank (empty). It
  • D-Link DI-804HV | Product Manual - Page 12
    Using the Configuration Menu Setup Wizard Once you have logged in, the Home screen will appear. Click Run Wizard The welcome screen outlines the steps to complete the setup wizard. Click Next to continue. Click Next 12
  • D-Link DI-804HV | Product Manual - Page 13
    Using the Configuration Menu Setup Wizard > Set Password Click Next Old PasswordNew PasswordReconfirm- This information is masked. Type in the new password for the admin account. Type in the new password again to confirm. Click Next to continue with the Setup Wizard. 13
  • D-Link DI-804HV | Product Manual - Page 14
    to select the type of internet connection for your router. Choose the appropriate selection and click Next to continue. Click Next If you are unsure of which setting to select, please contact your Internet Service Provider. Select Others only if you use PPTP in Europe or Big Pond Cable in Australia
  • D-Link DI-804HV | Product Manual - Page 15
    Configuration Menu Setup Wizard > Set Dynamic IP Address Click Next If your ISP uses Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service , the DI-804HV will automatically copy the MAC address of the network adapter in your computer. You can also manually type in
  • D-Link DI-804HV | Product Manual - Page 16
    . Enter the IP address information originally provided to you by your ISP. You will need to complete all the required fields. WAN Subnet Mask- The subnet for the DI-804HV is preconfigured to 255.255.255.0. Configurations can be made in, but not recommended. This feature is for advanced users. WAN
  • D-Link DI-804HV | Product Manual - Page 17
    the Configuration Menu Setup Wizard > PPPoE Click Next If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) PPPoE Account- Enter in the username provided to you by your ISP. PPPoE Password
  • D-Link DI-804HV | Product Manual - Page 18
    Using the Configuration Menu Setup Wizard Click Next Configure this section only if you have an analog dial is provided by your ISP. The Dial-up Account is also known as username. Dial-up Password- Enter in the password to log into your Dial-up account. Primary DNS- The Primary DNS can be found
  • D-Link DI-804HV | Product Manual - Page 19
    Using the Configuration Menu Setup Wizard Click Restart BackRestartExit- Click on Back button to go back to previous page. Click on Restart button to finalize the settings made. Click on Exit button to end the Setup Wizard without saving any changes. 19
  • D-Link DI-804HV | Product Manual - Page 20
    you a Static IP Address PPPoE- Some ISPs require the use of PPPoE to connect to their services (mainly for DSL users) Dial-up Network Others- Dial-up users can select this option to connect to their ISP through an analog dial-up modem if broadband connectivity is unavailable. PPTP- For use in
  • D-Link DI-804HV | Product Manual - Page 21
    to obtain an IP Address automatically from their ISP (Internet Service Provider). Host Name- This is optional, but may be required by some ISPs. The host name is the device name of the Router. MAC AddressClone MAC Address- Primary DNS AddressSecondary DNS Address- The default MAC Address is
  • D-Link DI-804HV | Product Manual - Page 22
    Configuration Menu Home > WAN > Static IP Address If you use a Static IP Address, you will input information here that your ISP has provided to you. IP Address- Input the IP by your ISP. Maximum Transmission Unit; default is 1500; you may need to change the MTU to conform to your ISP. 22
  • D-Link DI-804HV | Product Manual - Page 23
    Menu Home > WAN > PPPoE Most DSL users will select this option to obtain an IP address automatically from their ISP through the use of PPPoE. User NamePassword- Your PPPoE username provided by your ISP Your PPPoE password is provided by your ISP Service Name- (Optional) Check with your ISP for
  • D-Link DI-804HV | Product Manual - Page 24
    Password- Password provided by your ISP Primary DNSSeconday DNS- If the settings are configured as "0.0.0.0," they will be automatically assigned upon connection. Assigned IP Address- (Optional) Enter in the IP between the DI-804HV and your modem. If enabled, the Broadband Router will
  • D-Link DI-804HV | Product Manual - Page 25
    WAN connection used in Europe and Russia. My IP Address- Enter the IP Address My Subnet Mask- Enter the Subnet Mask Server IP Address- Enter the Server IP Address PPTP Account- Enter the PPTP account name PPTP Password- Enter the PPTP password Connection ID- (Optional) Enter the connection ID if
  • D-Link DI-804HV | Product Manual - Page 26
    Using the Configuration Menu Home > WAN > BigPond Cable Dynamic IP Address for BigPond is a WAN connection used in Australia. User Name- Enter in the username for the BigPond account Password- Enter the password for the BigPond account Login Server IP- (Optional) enter the Login Server name
  • D-Link DI-804HV | Product Manual - Page 27
    interface for the DI804HV. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. LAN IP Address- The IP address of the LAN interface. The default IP address is
  • D-Link DI-804HV | Product Manual - Page 28
    DHCP service. Starting IP Address- Ending IP Address- The starting IP address for the DHCP server's IP assignment. The ending IP address for the DHCP server's IP assignment. Lease Time- The length of time for the DHCP lease. DHCP Clients List- Lists the DHCP clients connected to the DI-804HV
  • D-Link DI-804HV | Product Manual - Page 29
    Using the Configuration Menu Home >VPN Settings VPN Settings are settings that are used to create virtual private tunnels to remote VPN gateways. The tunnel technology supports data confidentiality, data origin, authentication and data integrity of network information by utilizing encapsulation
  • D-Link DI-804HV | Product Manual - Page 30
    Gateway- The WAN IP address of remote VPN gateway. Preshared Key- The first key that supports IKE mechanism of both VPN gateways for negotiating setup a set of frequent-used IKE proposals and select from the set of IKE proposals for the tunnel. IPSec Proposal index- Click the button to setup
  • D-Link DI-804HV | Product Manual - Page 31
    Using the Configuration Menu Home >VPN Settings > Tunnel > Method > IKE > Select IKE Proposal IKE Proposal index- A list of selected proposal indexes from the IKE proposal pool listed below. Proposal Name- This
  • D-Link DI-804HV | Product Manual - Page 32
    Using the Configuration Menu Home >VPN Settings > Tunnel > Method > IKE > Select IKE Proposal Continued... Life TimeLife Time UnitProposal ID- Add to- Enter in the life time value. There are two units
  • D-Link DI-804HV | Product Manual - Page 33
    Using the Configuration Menu Home >VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal IPSec Proposal indexProposal Name- DH Group- A list of selected proposal indexes from the IPSec proposal pool listed below.
  • D-Link DI-804HV | Product Manual - Page 34
    Using the Configuration Menu Home >VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal Continued... Life TimeLife Time UnitProposal ID- Add to- Enter in a life time value. There are two units that
  • D-Link DI-804HV | Product Manual - Page 35
    Using the Configuration Menu Home >VPN Settings > Tunnel > Manual Tunnel Name- Current tunnel name. Aggressive Mode- Enabling this mode will accelerate establishing tunnel, but the device will have less security. Local Subnet- The subnet of the VPN gateway's local network. It can be a host, a
  • D-Link DI-804HV | Product Manual - Page 36
    Using the Configuration Menu Home >VPN Settings > Tunnel > Manual Continued... Encapsulation ProtocolEncryption Algorithm- Encryption Key- Authentication Algorithm- There are two protocols that can be selected: ESP and AH. There are two algorithms that can
  • D-Link DI-804HV | Product Manual - Page 37
    page of VPN setting. IKE proposal setup includes the setting of a set of frequent-used IKE proposals and selecting from the set of IKE proposals. Tunnel Name- Current tunnel name. Dynamic VPN- This feature works with a VPN software client so the DI-804HV does not need to know the IP address of
  • D-Link DI-804HV | Product Manual - Page 38
    Configuration Menu Home >VPN Settings > Dynamic VPN Tunnel Continued... Preshared Key- The first key that supports IKE mechanism of both VPN gateways for negotiating further security keys. The preshared key must be the same for both endpoint gateways. IKE Proposal index- Click the button to setup
  • D-Link DI-804HV | Product Manual - Page 39
    Using the Configuration Menu Home >VPN Settings > Dynamic VPN Tunnel > Set IKE Proposal IKE Proposal index- A list of selected proposal indexes from the IKE proposal pool listed below. Proposal Name- This is the name
  • D-Link DI-804HV | Product Manual - Page 40
    Using the Configuration Menu Home >VPN Settings > Dynamic VPN Tunnel > Set IKE Proposal Continued... Life TimeLife Time UnitProposal ID- Add to- Enter in the life time value. There are two units that can be
  • D-Link DI-804HV | Product Manual - Page 41
    Using the Configuration Menu Home >VPN Settings > Dynamic VPN Tunnel > Set IPSEC Proposal IPSec Proposal index- Proposal Name- A list of selected proposal indexes from the IPSec proposal pool listed below. This is the name
  • D-Link DI-804HV | Product Manual - Page 42
    Using the Configuration Menu Home >VPN Settings > Dynamic VPN Tunnel > Set IPSEC Proposal Continued... Life TimeLife Time UnitProposal ID- Add to- Enter in a life time value. There are two units that can be selected:
  • D-Link DI-804HV | Product Manual - Page 43
    Using the Configuration Menu Home >VPN Settings > L2TP Server Setting Enable L2TP Server- Click to enable the L2TP Server function. Virtual IP of L2TP Enter your Virtual IP address to access the L2TP server. Server- Authentication Protocol- Select one of the following authentication protocols:
  • D-Link DI-804HV | Product Manual - Page 44
    Using the Configuration Menu Home >VPN Settings >PPTP Server Setting Enable PPTP Server- Click to enable the PPTP Server function. Virtual IP of PPTP Enter your Virtual IP address to access the PPTP server. Server- Authentication Protocol- Select one of the following authentication protocols:
  • D-Link DI-804HV | Product Manual - Page 45
    Using the Configuration Menu Advanced > Virtual Server The DI-804HV can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-804HV firewall feature
  • D-Link DI-804HV | Product Manual - Page 46
    Using the Configuration Menu Advanced > Application Some applications require multiple connections, such as Internet some of these applications work with the DI-804HV. If you need to run applications that require multiple connections, specify the port normally associated with an application in the
  • D-Link DI-804HV | Product Manual - Page 47
    it is only a single computer that you want the policy applied to, then enter the IP address of that computer in the Start Source IP and leave the End Source IP blank. Port RangeEnter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a single
  • D-Link DI-804HV | Product Manual - Page 48
    Using the Configuration Menu Advanced > MAC Filters MAC (Media Access Control) Filters are bottom of the screen, there is a list of MAC addresses from the DHCP client computers connected to the DI-804HV. To use them, select one from the drop down list. Then click the "Clone" button followed by
  • D-Link DI-804HV | Product Manual - Page 49
    Using the Configuration Menu Advanced > URL Blocking Use URL Blocking to deny LAN computers from accessing specific web sites by its URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the
  • D-Link DI-804HV | Product Manual - Page 50
    Using the Configuration Menu Advanced > Domain Blocking Use Domain Blocking to allow or deny computers access to specific Internet domains whether it is through www, ftp, snmp, etc. Disabled Domain BlockingSelect this option if you do not want to use Domain Blocking. Allow users to access all
  • D-Link DI-804HV | Product Manual - Page 51
    or deny traffic to pass through the DI-804HV. SourceChoose between a LAN or WAN source. An asterisk signifies the selection of both sources. IP StartThe starting IP address for the filter policy. Leaving the field blank selects all IPs. IP EndThe ending IP address for the filter policy. Leaving the
  • D-Link DI-804HV | Product Manual - Page 52
    the policy applied to, then enter the port number in the Start Port field and leave the End Port field blank. If you want to use all the ports, you can leave the port range empty. ScheduleSelect Always, or choose From and enter the time period during which the virtual service will be available 52
  • D-Link DI-804HV | Product Manual - Page 53
    to monitor traffic and statistics of the DI-804HV. The DI804HV supports SNMP v1 or v2c Enable SNMP- (Simple Network Management Protocol) Local- LAN (Local Area Network) RemoteGet CommunitySet CommunitySNMP v1- SNMP v2- WAN (Wide Area Network) Enter the password public in this field to allow
  • D-Link DI-804HV | Product Manual - Page 54
    IP addresses (e.g., IP addresses assigned by a DHCP capable router or server) linked to a domain name. Users who have a Dynamic DNS account may use this feature on the DI-804HV. DDNSProvider- When an IP address is automatically assigned by a DHCP server, DDNS automatically updates the DNS server
  • D-Link DI-804HV | Product Manual - Page 55
    Using the Configuration Menu Advanced > Routing Dynamic Routing- Dynamic Routing Settings allow the VPN Router to route IP packets to another network automatically. The RIP protocol is applied, and broadcasts the routing information to other routers on the network regularly. By default, it is set
  • D-Link DI-804HV | Product Manual - Page 56
    Using the Configuration Menu Advanced > DMZ If you have a computer that cannot run Internet applications properly from behind the DI-804HV, then you can allow that computer to have unrestricted Internet access. Enter the IP address of that computer as a DMZ (Demilitarized Zone) host with
  • D-Link DI-804HV | Product Manual - Page 57
    to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. A username and password is still required to access the browser-based management interface. IP AddressPort- Internet IP Address of the computer that has access to the DI-804HV. If the IP Address is
  • D-Link DI-804HV | Product Manual - Page 58
    synchronizes the time settings accurately for the DI-804HV. Enable NTP- Default NTP serverTime Zone- Select to enable NTP and synchronize the time settings on your network using an NTP server If you are enabling NTP, please enter the link to the default server. Select your time zone from the pull
  • D-Link DI-804HV | Product Manual - Page 59
    setting file created by the DI-804HV can be uploaded into the unit. To reload a system settings file, click on Browse to search the local hard drive for the file to be used. The device can also be reset back to factory default settings by clicking on the Reset to Default button. Use the restore
  • D-Link DI-804HV | Product Manual - Page 60
    First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the firmware that you downloaded from the D-Link website to be used
  • D-Link DI-804HV | Product Manual - Page 61
    packet information passed through the router such as IP address, port address, ACK, SEQ number, and so on. The router will also check every incoming packet to detect if it is valid. When DoS is enabled, the router will prevent Denial of Service attacks on all computers connected to the DI-804HV. 61
  • D-Link DI-804HV | Product Manual - Page 62
    , and peripherals. The DI-804HV is a UPnP enabled router and will only work with other UPnP devices/softwares. If you do not want to use the UPnP Functionality, it can be disabled by selecting "Disabled". The device supports VPN (Virtual Private Network) pass-through for both PPTP (Point-to-Point
  • D-Link DI-804HV | Product Manual - Page 63
    Using the Configuration Menu Status > Device Info This screen displays information about the DI-804HV DHCP RenewDHCP Release- Click to renew IP addresses sent from the DHCP server. Click to release IP addreses sent from the DHCP server. 63
  • D-Link DI-804HV | Product Manual - Page 64
    Using the Configuration Menu Status > Log This screen displays activities occurring on the DI-804HV. First PageLast Page- Click First Page to go to the first page of the log. Click Last Page to go to the last page of
  • D-Link DI-804HV | Product Manual - Page 65
    Using the Configuration Menu Status > Log Settings E-Mail Alert- SMTP Server IPEmail Address- Send Mail NowIP Address of the Syslog Server- Log Type- The DI-804HV can be set up to send the log files to a specific email address. Enter in the IP address of the mail server. Enter in the email address
  • D-Link DI-804HV | Product Manual - Page 66
    Configuration Menu Status > Stats In Stats section, traffic statistics are displayed. Refresh- This will update the page. ResetWANLAN- This will reset the packet counter to zero. Displays Received / Transmitted packets from the WAN port. Displays Received / Transmitted packets from the LAN port
  • D-Link DI-804HV | Product Manual - Page 67
    Using the Configuration Menu Help This screen displays the complete Help menu. For help at anytime, click the Help tab in the Configuration menu. 67
  • D-Link DI-804HV | Product Manual - Page 68
    Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer
  • D-Link DI-804HV | Product Manual - Page 69
    Networking Basics Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next 69
  • D-Link DI-804HV | Product Manual - Page 70
    Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next 70
  • D-Link DI-804HV | Product Manual - Page 71
    Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 71
  • D-Link DI-804HV | Product Manual - Page 72
    Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. 72
  • D-Link DI-804HV | Product Manual - Page 73
    Networking Basics Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next. 73
  • D-Link DI-804HV | Product Manual - Page 74
    restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to
  • D-Link DI-804HV | Product Manual - Page 75
    Networking Basics Naming your Computer To name your computer, please follow these directions: In Windows XP: n Click Start (in the lower left corner of the screen) n Right-click on My Computer n Select Properties and click n Select the Computer Name Tab in the System Properties window. n You may
  • D-Link DI-804HV | Product Manual - Page 76
    in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following: n Right-click on the Local Area Connection icon
  • D-Link DI-804HV | Product Manual - Page 77
    This window will appear. n Click the Support tab n Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are
  • D-Link DI-804HV | Product Manual - Page 78
    Networking Basics Assigning a Static IP Address in Windows XP/2000 n Double-click on Network Connections n Right-click on Local Area Connections n Click on Properties 78
  • D-Link DI-804HV | Product Manual - Page 79
    IP address of 192.168.0.1) n Select Use the following DNS server addresses. Enter the LAN IP address of the Wireless Router. (D-Link wireless routers have a LAN IP address of 192.168.0.1) n Click OK 192 168 0 1 192 168 0 1 The DNS server information will be supplied by your ISP (Internet Service
  • D-Link DI-804HV | Product Manual - Page 80
    n Go to the Apple Menu and se- lect System Preferences n cClick on Network n Select Built-in Ethernet in the Show pull-down menu n Select Manually in the Con- figure pull-down menu n Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields n Click Apply Now 80
  • D-Link DI-804HV | Product Manual - Page 81
    the Apple Menu and select System Preferences n Click on Network n Select Built-in Ethernet in the Show pull-down menu n Select Using DHCP in the Configure pull-down menu n Click Apply Now n The IP Address, Subnet mask, and the Router's IP Address will appear in a few seconds 81
  • D-Link DI-804HV | Product Manual - Page 82
    you have run the Network Setup Wizard on all the computers in your network (please see the Network Setup Wizard section at the beginning to a print server) or share a network printer (a printer connected to your network through a Gateway/Router,) use the Add Support Center in Microsoft Windows XP. 82
  • D-Link DI-804HV | Product Manual - Page 83
    Networking Basics Adding a local printer (a printer connected directly to a computer) A printer that is not shared on the network and is connected directly to one computer is called a local printer. If you do not need to share your printer on a network, follow these directions to add the printer to
  • D-Link DI-804HV | Product Manual - Page 84
    n (Deselect Automati- cally detect and install my Plug and Play printer if it has been selected.) n Click Next n Select Use the follow- ing port: n From the pull-down menu select the correct port for your printer (Most computers use the LPT1: port, as shown in the illustration.) n Click Next 84
  • D-Link DI-804HV | Product Manual - Page 85
    Networking Basics Adding a local printer n Select and highlight the correct driver for your printer. n Click Next (If the correct driver is not displayed, insert the CD or floppy disk that came with your printer and click Have Disk .) n At this screen, you can change the name of the printer (
  • D-Link DI-804HV | Product Manual - Page 86
    Networking Basics Adding a local printer This screen gives you information about your printer. Click Finish When the test page has printed, Click OK 86
  • D-Link DI-804HV | Product Manual - Page 87
    will display the printer icon as shown at right. You have successfully added a local printer. Sharing a network printer After you have run the Network Setup Wizard on all the computers on your network, you can run the Add Printer Wizard on all the computers on your network. Please follow these
  • D-Link DI-804HV | Product Manual - Page 88
    Networking Basics Sharing a network printer n Click on Add a printer n Click Next n Select Network Printer n Click Next 88
  • D-Link DI-804HV | Product Manual - Page 89
    Networking Basics Sharing a network printer n Select Browse for a printer n Click Next Select the printer you would like to share n Click Next n Click Finish 89
  • D-Link DI-804HV | Product Manual - Page 90
    network: n Remember the printer name n Run the Add Printer Wizard on all the computers on your network n Make sure you have already run the Network Setup Wizard on all the network computers After you run the Add Printer Wizard on all the computers in the network, you can share the printer
  • D-Link DI-804HV | Product Manual - Page 91
    Networking Basics Sharing an LPR printer To share an LPR printer (using a print server,) you will need a Print Server such as the DP-101P+. Please make sure that you have run the Network Setup Wizard on all the computers on your network. To share an LPR printer, please follow these directions: n Go
  • D-Link DI-804HV | Product Manual - Page 92
    Networking Basics Sharing an LPR printer n This screen will show you information about your printer. n Click Finish n Select the printer you are adding from the list of Printers. n Insert the printer driver disk that came with your printer. n Click Have Disk If the printer driver is already
  • D-Link DI-804HV | Product Manual - Page 93
    . n Please run the Add Printer Wizard on all the computers on your network in order to share the printer. Note: You must run the Network Setup Wizard on all the computers on your network before you run the Add Printer Wizard. 93
  • D-Link DI-804HV | Product Manual - Page 94
    you have tried other methods for troubleshooting your network, you may choose to Reset the DI-804HV to the factory default settings. To hard-reset the D-Link DI-804HV to the Factory Default Settings, please do the following: n Locate the Reset button on the back of the DI-804HV n Use a paper clip to
  • D-Link DI-804HV | Product Manual - Page 95
    Specifications Standards n IEEE 802.3 10BASET-T Ethernet n IEEE 802.3u 100BASE-TX Fast Ethernet n IEEE 802.3x Flow Control n ANSI/IEEE 802.3 NWay auto-negotiation VPN Pass Through Function n PPTP inches (31mm) Weight n ~10.8 oz. (0.3 kg) Ports n n n 4 x NWay 10BASE-T/100BASE-TX Fast Ethernet LAN
  • D-Link DI-804HV | Product Manual - Page 96
    access the web based configuration? When entering the IP Address of the DI-804HV (192.168.0.1), you Router Computer to Normal Port (hub/switch) Access Point to Normal Port (hub/switch) Print Server to Normal Port (hub/switch) Uplink Port to Normal Port (hub/switch) Rule of Thumb: "If there is a link
  • D-Link DI-804HV | Product Manual - Page 97
    to remember to properly configure the cables is problems. When to use port on a Hub/Switch - Straight-through Computer to an uplink port on a Hub/Switch - Crossover Hub/Switch uplink port to another Hub/Switch uplink port - Crossover Hub/Switch uplink port to another Hub/Switch normal port
  • D-Link DI-804HV | Product Manual - Page 98
    software for more information on disabling or configuring it. Step 3 Configure your Internet settings. Go to Start>Settings>Control Panel. Double click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click to the Connection tab and set
  • D-Link DI-804HV | Product Manual - Page 99
    ) Why can´t I access the web based configuration? (continued) Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in Windows 95, 98, or ME
  • D-Link DI-804HV | Product Manual - Page 100
    to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in Windows 2000/XP? Step 1 Click on Start and select Run. Step 2 Type cmd then click OK. Step 3 From the Command Prompt, enter ipconfig. It will return your IP Address, subnet mask, and default gateway
  • D-Link DI-804HV | Product Manual - Page 101
    same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. Make sure you take note of your computer´s Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1. How can I assign a Static
  • D-Link DI-804HV | Product Manual - Page 102
    use on the network. Set the Default Gateway to be the same as the LAN IP Address of your router (192.168.0.1). Set the Preferred DNS server to be the same as the LAN IP address of your router (192.168.0.1). The Alternate DNS server is not needed or enter a DNS server from your ISP. Click OK twice
  • D-Link DI-804HV | Product Manual - Page 103
    here (192.168.0.1). Click Add when finished. Step 4 Click on the DNS Configuration tab. Click Enable DNS. Type in a Host (can be any word). Under DNS server search order, enter the LAN IP Address of your router (192.168.0.1). Click Add. Step 5 Click OK twice. When prompted to reboot your computer
  • D-Link DI-804HV | Product Manual - Page 104
    last connected directly to the cable modem. Step 1 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button
  • D-Link DI-804HV | Product Manual - Page 105
    Renew and Continue buttons. Static Cable Connection Step 1 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN
  • D-Link DI-804HV | Product Manual - Page 106
    the D-Link tech support website at: http://support.dlink.com for the latest firmware upgrade information.) Step 2 Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle
  • D-Link DI-804HV | Product Manual - Page 107
    web configuration where you can view the device info. Under WAN, click Connect. Click Continue when prompted. You should now see that the device info will show an IP Address, verifying that the device has connected to a server and has been assigned an IP Address. Can I use my D-Link Broadband Router
  • D-Link DI-804HV | Product Manual - Page 108
    can I establish a VPN connection with another DI-804HV router? Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default: 192.168.0.1) in your web browser. By default the username is "admin" and there is no password. Step 2 Click the VPN button on
  • D-Link DI-804HV | Product Manual - Page 109
    for the remote DI804HV´s LAN and the corresponding subnet mask. Step 6 In the Remote Gateway field enter the WAN IP address of the remote DI-804HV and in the Preshared Key field, enter a key which must be exactly the same as the Preshared Key that is configured on the remote DI-804HV. Step 7 Click
  • D-Link DI-804HV | Product Manual - Page 110
    Frequently Asked Questions (continued) How can I establish a VPN connection with another DI-804HV router? (continued) Step 8 Enter a name for proposal ID number 1 and select Group 1, 2, or 5 from the DH Group dropdown menu. Step 9 Select DES or 3DES as the
  • D-Link DI-804HV | Product Manual - Page 111
    Frequently Asked Questions (continued) How can I establish a VPN connection with another DI-804HV router? (continued) Step 11 Select 1 out of the Proposal ID dropdown menu and click Add To, which will add the proposal that was just configured to the IKE Proposal Index. Click Apply and then click
  • D-Link DI-804HV | Product Manual - Page 112
    Frequently Asked Questions (continued) How can I establish a VPN connection with another DI-804HV router? (continued) Step 15 Select DES or 3DES as the Encryption Algorithm To, which will add the proposal that was just configured to the IPSec Proposal Index. Click Apply and then click Restart. 112
  • D-Link DI-804HV | Product Manual - Page 113
    a VPN connection with a DI-804V router? You need to first configure your DI-804HV router. Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default: 192.168.0.1) in your web browser. By default the username is "admin" and there is no password. Step
  • D-Link DI-804HV | Product Manual - Page 114
    ) How can I establish a VPN connection with a DI-804V router? (continued) Step 3 In the space provided, enter the Tunnel Name for ID number 1, select IKE, and then click More. Step 4 In the Local Subnet and Local Netmask fields enter the network identifier for DI-804HV´s LAN and the corresponding
  • D-Link DI-804HV | Product Manual - Page 115
    ) How can I establish a VPN connection with a DI-804V router? (continued) Step 6 In the Remote Gateway field enter the WAN IP address of the remote DI-804V and in the Preshared Key field, enter a key which must be exactly the same as the Preshared Key that is configured on the DI-804V. Step 7 Click
  • D-Link DI-804HV | Product Manual - Page 116
    Frequently Asked Questions (continued) How can I establish a VPN connection with a DI-804V router? (continued) Step 11 Select 1 out of the Proposal ID dropdown menu and click Add To, which will add the proposal that was just configured to the IKE Proposal Index. Click Apply and then click Back. Step
  • D-Link DI-804HV | Product Manual - Page 117
    to configure the DI-804V router. Step 1 Access the router's web configuration by entering the router's IP address in your web browser. The default IP address is 192.168.0.1. Login using your password. The default username is "admin" and the password is blank. Step 2 Click on Basic Setup and then
  • D-Link DI-804HV | Product Manual - Page 118
    and that Perfect Forward Secure is Disabled. Step 10 Verify the Encryption Protocol is set to 3DES and enter in your Preshared Key. Note: The Preshared Key needs to be identical to the one configured on the DI-804HV. Step 11 Leave the Key Life and IKE Life Time values at their default levels and
  • D-Link DI-804HV | Product Manual - Page 119
    ? You need to first configure your DI-804HV router. Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default: 192.168.0.1) in your web browser. By default the username is "admin" and there is no password. Step 2 Click the VPN button on the left
  • D-Link DI-804HV | Product Manual - Page 120
    ) How can I establish a VPN connection with a DFL-300 firewall? (continued) Step 3 In the space provided, enter the Tunnel Name for ID number 1, select IKE, and then click More. Step 4 In the Local Subnet and Local Netmask fields enter the network identifier for DI-804HV´s LAN and the corresponding
  • D-Link DI-804HV | Product Manual - Page 121
    (continued) How can I establish a VPN connection with a DFL-300 firewall? (continued) Step 6 In the Remote Gateway field enter the WAN IP address of the remote DFL-300 and in the Preshared Key field, enter a key which must be exactly the same as the Preshared Key that is configured on the DFL-300
  • D-Link DI-804HV | Product Manual - Page 122
    Frequently Asked Questions (continued) How can I establish a VPN connection with a DFL-300 firewall? (continued) Step 11 Select 1 out of the Proposal ID dropdown menu and click Add To, which will add the proposal that was just configured to the IKE Proposal Index. Click Apply and then click Back.
  • D-Link DI-804HV | Product Manual - Page 123
    DFL-300 by opening a web browser such as Internet Explorer and type the IP address of the DFL-300 in the address bar (192.168.1.1). Step 2 Enter the username (admin) and the password (admin). Click OK. Step 3 Click on Configuration and take note of the IP address that your ISP has assigned you. 123
  • D-Link DI-804HV | Product Manual - Page 124
    Gateway-Dynamic IP. Enter the WAN IP address of the DI-804HV if Remote Gateway-Fixed IP is selected. Step 9 Enter the network identifier corresponding subnet mask of the DI-804HV´s LAN. Step 10 Enter a Preshared Key. The Preshared Key needs to be identical to the one configured on the DI-804HV Step
  • D-Link DI-804HV | Product Manual - Page 125
    (continued) After you have configured both the router and firewall, you need to establish a connection. Step 1 Open a command prompt and from a computer connected to the Internal interface of the DFL-300 and ping the IP address of a computer that is on the internal LAN of the DI-804HV, or vice versa
  • D-Link DI-804HV | Product Manual - Page 126
    will need to open up ports or the router will block the request. Step 1 Open your web browser and enter the IP Address of your DLink router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 2 Click on Advanced on top and then click Virtual Server on the left side. Step
  • D-Link DI-804HV | Product Manual - Page 127
    be corrupted but no other company information would be exposed. D-Link, a leading maker of routers, is one company that sells products designed for setting up a DMZ How do I configure the DMZ Host? The DMZ feature allows you to forward all incoming ports to one computer on the local network. The DMZ
  • D-Link DI-804HV | Product Manual - Page 128
    ? (continued) Step 2 Log into the web based configuration of the router by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing) DDI-I8-60244HV admin Step 3 Click the Advanced tab and then click
  • D-Link DI-804HV | Product Manual - Page 129
    do I open a range of ports on my DI-804HV using Firewall rules? Step 1 Access the router's web configuration by entering the router's IP Address in your web browser. The default IP Address is 192.168.0.1. Login using your password. The default username is "admin" and the password is blank. If you
  • D-Link DI-804HV | Product Manual - Page 130
    to specify the following virtual server mapping table: Server Port 21 Server IP 192.168.0.5 Enable X 80 192.168.0.6 X 1723 192.168.0.7 X How do I use PC Anywhere with my DI-804HV router? You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1 Open your
  • D-Link DI-804HV | Product Manual - Page 131
    Frequently Asked Questions (continued) How do I use PC Anywhere with my DI-804HV router? (continued) Step 6 Create a second entry as shown here: pcanywhere2 Step 7 Click Apply and 10 Run PCAnywhere from the remote site and use the WAN IP Address of the router, not your computer´s IP Address. 131
  • D-Link DI-804HV | Product Manual - Page 132
    client when it is configured to allow remote connections. This is the case when using a Graphical Interface (such as the Java Interface) with the client. Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step
  • D-Link DI-804HV | Product Manual - Page 133
    of your Playstation. Step 1 Upgrade firmware (follow link above). Step 2 Open your web browser and enter the IP Address of the router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 3 Click on the Advanced tab and then click on Virtual Server on the left side. Step
  • D-Link DI-804HV | Product Manual - Page 134
    ) How can I use Gamespy behind my D-Link router? Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1). Enter admin for the username and your password (blank by default). Step 2 Click on the Advanced tab and then click Virtual Server on the left side. Step 3 You will
  • D-Link DI-804HV | Product Manual - Page 135
    software. If you are having problems, please follow steps below: Step 1 Enter the IP Address of your router in a web browser (192.168.0.1). Step 2 Enter your username (admin) and your password (blank by default). Step 3 Click on Advanced and then click Virtual Server. Step 4 Click Enabled and then
  • D-Link DI-804HV | Product Manual - Page 136
    configure your router. Warcraft 3 (Battlenet) uses port 6112. For the DI804HV: Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). warcraft3 100 Both 6500 6500 Step 2 Click on Advanced and then click Virtual
  • D-Link DI-804HV | Product Manual - Page 137
    while using iChat. iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403 (UDP) To video conference with other clients Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on
  • D-Link DI-804HV | Product Manual - Page 138
    Questions (continued) How do I set up my router to use iChat? -for Macintosh users(continued) Step 3 Create a new firewall rule: IP Address of the computer you are running iChat from. ichat1 WAN LAN 192.168.0.100 UDP 5060 Leave the second box empty. Under Protocol, select UDP. In the port
  • D-Link DI-804HV | Product Manual - Page 139
    ) How do I set up my router to use iChat? -for Macintosh users- For File Sharing: Step 1 Click on Advanced and then Virtual Server. Step 2 Check Enabled to activate entry. Step 3 Enter a name for your virtual server entry (ichat3). Step 4 Next to Private IP, enter the IP Address of the computer on
  • D-Link DI-804HV | Product Manual - Page 140
    Mac OSX firewall is active? -for Macintosh users- Mac OS X 10.2 and later default state. If you have opened the AIM port, you may be able to receive a file but not send them. In its default firewall at the sending computer, a different file sharing service may be used instead of iChat. The types of
  • D-Link DI-804HV | Product Manual - Page 141
    used for solving the IP Address depletion problem. Basically, each NAT box has a table consisting of pairs of local IP Addresses and globally unique other IP network) using one IP Address. D-Link´s broadband routers (ie: DI-804HV) support NAT. With proper configuration, multiple users can access
  • D-Link DI-804HV | Product Manual - Page 142
    over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com When contacting technical support, you will need the information below. (Please look on the back side of the unit.) n Serial number of the unit n Model number
  • D-Link DI-804HV | Product Manual - Page 143
    by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. Limited Software Warranty: D-Link warrants that the software portion of the product ("Software") will substantially conform to D-Link's then current functional specifications for
  • D-Link DI-804HV | Product Manual - Page 144
    manuals or accessories in the shipping package. D-Link firmware or other products or services provided by anyone other than DLink; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE
  • D-Link DI-804HV | Product Manual - Page 145
    limited warranty provides specific legal rights and the product Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user in accordance with the instructions, may cause harmful
  • D-Link DI-804HV | Product Manual - Page 146
    Registration Register online your D-Link product at http://support.dlink.com/register/ 146
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Broadband Hardware
Manual
Building Networks for People
VPN Router
DI-804HV
D-Link
10/08/04