D-Link DIR 601 User Guide

D-Link DIR 601 - Dlink Wireless N 150 Home Router Manual

Get D-Link DIR 601 - Dlink Wireless N 150 Home Router PDF manuals and user guides
UPC - 790069332517
View all D-Link DIR 601 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR 601 manual content summary:

  • D-Link DIR 601 | User Guide - Page 1
  • D-Link DIR 601 | User Guide - Page 2
    are trademarks or registered trademarks of their respective companies. Copyright © 2010-2011 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-601 User Manual i
  • D-Link DIR 601 | User Guide - Page 3
    Setup Wizard 13 D-Link DIR-601 User Manual Web-based Configuration Utility 19 Internet Connection Setup Wizard 20 Manual Configuration 25 Dynamic (Cable 25 Dynamic IP Address (DHCP 26 PPPoE (DSL 27 PPTP 29 L2TP 31 Static IP Address 33 Wireless Settings 35 Manual Wireless Network Setup
  • D-Link DIR 601 | User Guide - Page 4
    ® XP 89 D-Link DIR-601 User Manual Configure WPA-PSK 90 Troubleshooting 92 Wireless Basics 96 What is Wireless 97 Wireless Modes 100 Networking Basics 101 Check your IP address 101 Statically Assign an IP address 102 Technical Specifications 103 Contacting Technical Support 104 Warranty
  • D-Link DIR 601 | User Guide - Page 5
    PProacdkuacgteOCvoentrevnietsw D-Link DIR-601 Wireless N 150 Home Router Power Adapter Ethernet Cable CD-ROM Note: Using a power supply with a different voltage rating than the one included with the DIR-601 will cause damage and void the warranty for this product. D-Link DIR-601 User Manual 1
  • D-Link DIR 601 | User Guide - Page 6
    based Cable or DSL modem • IEEE 802.11n/g wireless clients • 10/100 Ethernet Web-based Configuration Utility Wizard Requirements Computer with the following: • Windows® XP with Service Pack 2, Vista® or Windows® 7 • An installed Ethernet adapter • CD-ROM drive D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 7
    It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-601 can securely access corporate networks. • User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, you can configure your router to your specific settings within minutes. * Maximum wireless
  • D-Link DIR 601 | User Guide - Page 8
    the Ethernet cable to the cable or DSL 2 Internet Port modem. 3 Power Receptor The Power LED will illuminate red when the camera is receiving power. 4 Reset Pressing the Reset button restores the router to its original factory default settings. D-Link DIR-601 User Manual 4
  • D-Link DIR 601 | User Guide - Page 9
    solid light indicates that the wireless segment is ready. This LED blinks during wireless data 3 WLAN LED transmission. A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED 4 Local Network LEDs blinks during data transmission. D-Link DIR-601 User Manual 5
  • D-Link DIR 601 | User Guide - Page 10
    the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online. D-Link DIR-601 User Manual 6
  • D-Link DIR 601 | User Guide - Page 11
    ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-601 User Manual 7
  • D-Link DIR 601 | User Guide - Page 12
    Section 2 - Installation Network Diagram Desktop Computer Wireless Laptop DIR-601 Router 1 2 LAN 3 4 INTERNET 5V - - - 1A RESET Internet INTERNET D-Link DIR-601 User Manual 8
  • D-Link DIR 601 | User Guide - Page 13
    , Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 12 to configure your router. D-Link DIR-601 User Manual 9
  • D-Link DIR 601 | User Guide - Page 14
    If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network: • Disable UPnP™ • Disable DHCP • Change the LAN IP address to an available address on your network. The LAN
  • D-Link DIR 601 | User Guide - Page 15
    other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Link DIR-601 User Manual 11
  • D-Link DIR 601 | User Guide - Page 16
    DIR-601 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. You may manually configure your router without the wizard. Refer to the next page to manually setup your router. Insert the Quick Router Setup
  • D-Link DIR 601 | User Guide - Page 17
    completed the setup on your router with the CD, the Quick Setup Wizard will not appear. Please refer to page 20. Quick Setup Wizard To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1). D-Link DIR-601 User Manual 13
  • D-Link DIR 601 | User Guide - Page 18
    Section 3 - Configuration This wizard is designed to guide you through a step-by step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Select your time zone from the drop-down menu and click Next to continue. D-Link DIR-601 User Manual 14
  • D-Link DIR 601 | User Guide - Page 19
    Section 3 - Configuration In order to secure your new networking device, please enter a password and click Next. Select Enable Advanced DNS Services to allow this function to improve your overall Internet experience. Click Next to continue. D-Link DIR-601 User Manual 15
  • D-Link DIR 601 | User Guide - Page 20
    Section 3 - Configuration Please wait while your router detects your internet connection type. Select your Internet connection type and click Next to continue. D-Link DIR-601 User Manual 16
  • D-Link DIR 601 | User Guide - Page 21
    you have a security key for your network. If you would like the router to automatically assign a security key, choose Automatically assign a network key or you may choose Manually assign a network key and you may enter your own Network key. Click Next to continue. D-Link DIR-601 User Manual 17
  • D-Link DIR 601 | User Guide - Page 22
    Section 3 - Configuration Once this screen appears, your setup is complete. Click Save & Connect to reboot the router. Before your router reboots, you will be asked if you want to bookmark 'D-Link Router Web Management," click Ok to finish. D-Link DIR-601 User Manual 18
  • D-Link DIR 601 | User Guide - Page 23
    and enter the IP address of the router (192.168.0.1). Select Admin from the drop-down menu and then enter your password. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DIR-601 User Manual 19
  • D-Link DIR 601 | User Guide - Page 24
    of the router, the Setup > Internet page will appear. Click the Internet Connection Setup Wizard button to quickly configure your router using the setup wizard. If you want to enter your settings without running the wizard, click Manual Internet Configuration Wizard. D-Link DIR-601 User Manual 20
  • D-Link DIR 601 | User Guide - Page 25
    Section 3 - Configuration Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. D-Link DIR-601 User Manual 21
  • D-Link DIR 601 | User Guide - Page 26
    directly to your modem. If you are currently using that computer, click Clone Your PC's MAC Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. D-Link DIR-601 User Manual 22
  • D-Link DIR 601 | User Guide - Page 27
    subnet mask, gateway, and DNS server addresses. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DIR-601 User Manual 23
  • D-Link DIR 601 | User Guide - Page 28
    and password. Click Next to continue. If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. D-Link DIR-601
  • D-Link DIR 601 | User Guide - Page 29
    Configuration Dynamic (Cable) If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type is" drop-down menu. Click the Save Settings button when you have configured the connection. D-Link DIR-601 User Manual 25
  • D-Link DIR 601 | User Guide - Page 30
    address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 31
    addresses. In most cases, select Dynamic. IP Address: Enter the IP address (Static PPPoE only). User Name: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP Service Name (optional). D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 32
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 33
    ISP assigned you the IP address, subnet Mode: mask, gateway, and DNS server addresses. In most cases, select Dynamic. PPTP IP Enter the IP address (Static PPTP only). Address: PPTP Enter the Primary and Secondary DNS Server Addresses Subnet (Static PPTP only). Mask: D-Link DIR-601 User Manual 29
  • D-Link DIR 601 | User Guide - Page 34
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 35
    L2TP IP address supplied by your ISP (Static Address: only). L2TP Subnet Enter the Subnet Mask supplied by your ISP (Static Mask: only). L2TP Gateway: Enter the Gateway IP Address provided by your ISP. L2TP Server IP: Enter the Server IP provided by your ISP (optional). D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 36
    address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 37
    assigned by your ISP. Gateway: DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP (1500 is the default MTU). D-Link DIR-601 User Manual 33
  • D-Link DIR 601 | User Guide - Page 38
    address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 39
    76. Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 78. If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup and refer to the next page. D-Link DIR-601 User Manual 35
  • D-Link DIR 601 | User Guide - Page 40
    the Channel Width: Width: Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting. 40MHz - Select if you are using only 802.11n wireless clients. D-Link DIR-601 User Manual 36
  • D-Link DIR 601 | User Guide - Page 41
    is selected, the Status: SSID of the DIR-601 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-601 in order to connect to it. Wireless Refer to page 75 for more information regarding wireless security. Security: D-Link DIR-601 User Manual 37
  • D-Link DIR 601 | User Guide - Page 42
    the Subnet Mask. The default subnet mask is 255.255.255.0. Enable DNS Enter the Domain name (Optional). Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-601 User Manual 38
  • D-Link DIR 601 | User Guide - Page 43
    or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Lease Time: The length of time for the IP address lease. Enter the Lease time in minutes. Always Enable this feature to broadcast your LAN/WLAN network. Broadcast: D-Link DIR-601 User Manual 39
  • D-Link DIR 601 | User Guide - Page 44
    available, those two devices may both receive an IP Address Conflict error, or the second device may still not receive an IP Address; in that case, you may still need to extend the "DHCP IP Address Range" to address the issue, it is located in the DHCP Server section. D-Link DIR-601 User Manual 40
  • D-Link DIR 601 | User Guide - Page 45
    are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. For a list of ports for common applications, please visit http://support.dlink.com/faq/ view.asp?prod_id=1191. D-Link DIR-601 User Manual 41
  • D-Link DIR 601 | User Guide - Page 46
    . Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-601 User Manual 42
  • D-Link DIR 601 | User Guide - Page 47
    . Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-601 User Manual 43
  • D-Link DIR 601 | User Guide - Page 48
    Address Translation). Special Applications makes some of these applications work with the DIR-601 Internet side that will be used to access the application. You may define a service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-601 User Manual 44
  • D-Link DIR 601 | User Guide - Page 49
    by default. router to your ISP. This is determined by your ISP. ISP's offer speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 50
    menu. MAC Address: Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click
  • D-Link DIR 601 | User Guide - Page 51
    time or dates, and/or block access from applications like P2P utilities or games. Add Policy: Check the Enable Access Control check box and click the Add Policy button to start the Access Control Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DIR-601 User Manual 47
  • D-Link DIR 601 | User Guide - Page 52
    the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. • Address Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link DIR-601 User Manual 48
  • D-Link DIR 601 | User Guide - Page 53
    IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 54
    the Access Control section (page 46). Configure Select Deny or Allow computers access to only Website Filter these sites. Below: Clear the list Click to delete all entries in the list. below: Website URL/ Enter the keywords or URLs that you want to allow Domain: or deny. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 55
    Deny. Enable: Check to enable rule. Source IP Start: Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Source IP End: Enter the ending IP address. Enter 255.255.255.255 if you do rule, or click the Delete icon to remove the rule. D-Link DIR-601 User Manual 51
  • D-Link DIR 601 | User Guide - Page 56
    the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the System > Network Settings page so that the IP address of the DMZ machine does not change. D-Link DIR-601 User Manual 52
  • D-Link DIR 601 | User Guide - Page 57
    method of customizing specific routes of data through your network. Destination IP: Enter the IP address of packets that will take this route. Netmask: Enter the : Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-601 User Manual 53
  • D-Link DIR 601 | User Guide - Page 58
    your wireless network. This will improve the quality of video and voice applications for your wireless clients. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create higher data loss. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 59
    networking equipment, software and peripherals. WAN Ping: Unchecking the box will not allow the DIR-601 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check multicast traffic to pass Streams: through the router from the Internet. D-Link DIR-601 User Manual 55
  • D-Link DIR 601 | User Guide - Page 60
    online hackers and unauthorized users from gaining access to your router's network settings. Remote Remote management allows the DIR-601 to be configured from Management: the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only
  • D-Link DIR 601 | User Guide - Page 61
    Section 3 - Configuration Reserve: The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. D-Link DIR-601 User Manual 57
  • D-Link DIR 601 | User Guide - Page 62
    Enter the NTP server or select one from the dropUsed: down menu. Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer's Time Settings. D-Link DIR-601 User Manual 58
  • D-Link DIR 601 | User Guide - Page 63
    the router logs to a SysLog to SysLog Server. Server: SysLog Server The address of the SysLog server that will be used IP Address: to send the logs.You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-601 User Manual 59
  • D-Link DIR 601 | User Guide - Page 64
    router alert messages, and firmware update notification to your e-mail address. Enable Email When this option is enabled, router activity logs are Notification: e-mailed to a designated e-mail address. From Email This e-mail address a schedule, go to Tools > Schedules. D-Link DIR-601 User Manual 60
  • D-Link DIR 601 | User Guide - Page 65
    the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DIR-601 User Manual 61
  • D-Link DIR 601 | User Guide - Page 66
    find out if there is an updated firmware; if so, download the new firmware to your hard drive. Firmware After you have downloaded the new firmware, Upgrade: click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. D-Link DIR-601 User Manual 62
  • D-Link DIR 601 | User Guide - Page 67
    you registered with your DDNS service provider. Username or Enter the Username for your DDNS account. Key: Password or Enter the Password for your DDNS account. Key: Timeout: Enter a time (in hours). Status: Displays the current connection status to your DDNS server. D-Link DIR-601 User Manual 63
  • D-Link DIR 601 | User Guide - Page 68
    Section 3 - Configuration System Check Ping Test: The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-601 User Manual 64
  • D-Link DIR 601 | User Guide - Page 69
    The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DIR-601 User Manual 65
  • D-Link DIR 601 | User Guide - Page 70
    the current information for the DIR-601. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and the PPPoE connection. See the following page for more information. D-Link DIR-601 User Manual 66
  • D-Link DIR 601 | User Guide - Page 71
    wireless settings such as SSID and Channel. LAN Displays computers and devices that are connected Computers: to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Displays the Multicast Group IP Address. Memberships: D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 72
    level of the events to view. This router also has external Syslog Server support so you can send the log files to router log to the e-mail address configured in the Tools > Email Settings screen. Save Log: This option will save the router to a log file on your computer. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 73
    Section 3 - Configuration Stats The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-601 on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted. D-Link DIR-601 User Manual 69
  • D-Link DIR 601 | User Guide - Page 74
    pending. Dir: The direction of initiation of the conversation: Priority: Out - Initiated from LAN to WAN. In - Initiated from WAN to LAN. The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority. D-Link DIR-601 User Manual 70
  • D-Link DIR 601 | User Guide - Page 75
    of the connection. 300 seconds - UDP connections. 240 seconds - Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection can be re-established. 7800 seconds - Established or closing TCP connections. D-Link DIR-601 User Manual 71
  • D-Link DIR 601 | User Guide - Page 76
    Section 3 - Configuration Routing Table This page displays the routing details configured for your router. D-Link DIR-601 User Manual 72
  • D-Link DIR 601 | User Guide - Page 77
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-601 User Manual 73
  • D-Link DIR 601 | User Guide - Page 78
    Section 3 - Configuration Support D-Link DIR-601 User Manual 74
  • D-Link DIR 601 | User Guide - Page 79
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-601 User Manual 75
  • D-Link DIR 601 | User Guide - Page 80
    Section 4 - Security Wireless Connection Setup Wizard To run the security wizard, browse to the Setup page and then click the Wireless Connection Setup Wizard button. Click Next to continue. D-Link DIR-601 User Manual 76
  • D-Link DIR 601 | User Guide - Page 81
    click Next to continue. You will need to enter this key on your wireless clients to connect to the router. If you selected Automatically, the following screen will show you your security key to enter on your wireless clients. Click Save to finish the Security Wizard. D-Link DIR-601 User Manual 77
  • D-Link DIR 601 | User Guide - Page 82
    this on your wireless clients. PIN: Select this option to use PIN method. In order to use this method you must know the wireless client's 8 digit PIN and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. D-Link DIR-601 User Manual 78
  • D-Link DIR 601 | User Guide - Page 83
    opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side. 2. Select the Manual Wireless Connection Setup button. 3. Next to Security Mode, select WPA-Personal. 4. Next to WPA Mode, select Auto, WPA2 Only, or WPA
  • D-Link DIR 601 | User Guide - Page 84
    opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side. 2. Select the Manual Wireless Connection Setup button. 3. Next to Security Mode, select WPA-Enterprise. 4. Next to WPA Mode, select Auto, WPA2 Only, or WPA
  • D-Link DIR 601 | User Guide - Page 85
    If the MAC Address Authentication box is selected then the user will need to connect from the same computer whenever logging into the wireless network. 12. Click Advanced to enter settings for a secondary RADIUS Server. 13. Click Apply Settings to save your settings. D-Link DIR-601 User Manual 81
  • D-Link DIR 601 | User Guide - Page 86
    wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 87
    you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-601 User Manual 83
  • D-Link DIR 601 | User Guide - Page 88
    or passphrase that is on your router and click Ok. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-601 User Manual 84
  • D-Link DIR 601 | User Guide - Page 89
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-601 User Manual 85
  • D-Link DIR 601 | User Guide - Page 90
    used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-601 User Manual 86
  • D-Link DIR 601 | User Guide - Page 91
    passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-601 User Manual 87
  • D-Link DIR 601 | User Guide - Page 92
    or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-601 User Manual 88
  • D-Link DIR 601 | User Guide - Page 93
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-601 User Manual 89
  • D-Link DIR 601 | User Guide - Page 94
    Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-601 User Manual 90
  • D-Link DIR 601 | User Guide - Page 95
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-601 User Manual 91
  • D-Link DIR 601 | User Guide - Page 96
    having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screen shots on your computer will look similar to the following examples.) 1. Why can't I access the web-based configuration utility? When entering the IP address of the D-Link router
  • D-Link DIR 601 | User Guide - Page 97
    to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-601 User Manual 93
  • D-Link DIR 601 | User Guide - Page 98
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-601 User Manual 94
  • D-Link DIR 601 | User Guide - Page 99
    below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. • To change the MTU enter the
  • D-Link DIR 601 | User Guide - Page 100
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-601 User Manual 96
  • D-Link DIR 601 | User Guide - Page 101
    WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn't use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. D-Link DIR-601 User Manual 97
  • D-Link DIR 601 | User Guide - Page 102
    house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-601 User Manual 98
  • D-Link DIR 601 | User Guide - Page 103
    on same frequency. Security Don't let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. D-Link DIR-601 User Manual 99
  • D-Link DIR 601 | User Guide - Page 104
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 105
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-601 User Manual 101
  • D-Link DIR 601 | User Guide - Page 106
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-601 User
  • D-Link DIR 601 | User Guide - Page 107
    45) • 28.9Mbps (60) • 43.3Mbps (90) • 57.8Mbps (120) • 65Mbps (135) • 72.2Mbps (150) Frequency Range • 2.4GHz to 2.4835GHz Transmitter Output Power • 18.7dBm (average) LEDs • Power • Internet • WLAN • factors will adversely affect wireless signal range. D-Link DIR-601 User Manual 103
  • D-Link DIR 601 | User Guide - Page 108
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-601 User Manual 104
  • D-Link DIR 601 | User Guide - Page 109
    by D-Link at an Authorized D-Link Service Office. The replacement hardware need Link and its suppliers under this Limited Warranty will be, at D-Link's option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 110
    a Case ID Number from D-Link Technical Support at 1-877-453-5465, who ID Number at https:// rma.dlink.com/. • After an RMA manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 111
    Link. Return shipping charges shall be prepaid by D-Link if you use an address firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DIR-601 User Manual 107
  • D-Link DIR 601 | User Guide - Page 112
    . Copyright ©2010-2011 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-601 User Manual 108
  • D-Link DIR 601 | User Guide - Page 113
    instructions, antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-601 User Manual
  • D-Link DIR 601 | User Guide - Page 114
    non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-601 User Manual 110
  • D-Link DIR 601 | User Guide - Page 115
    Appendix F - Registration Registration Register your product online at registration.dlink.com Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.1 July 5, 2011 D-Link DIR-601 User Manual 111
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115