D-Link DIR-808L User Manual

D-Link DIR-808L Manual

Get D-Link DIR-808L PDF manuals and user guides View all D-Link DIR-808L manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-808L manual content summary:

  • D-Link DIR-808L | User Manual - Page 1
    Version 1.0 | July 16, 2013 User Manual Wireless AC600 Dual Band Cloud Router DIR-808L
  • D-Link DIR-808L | User Manual - Page 2
    are trademarks or registered trademarks of their respective companies. Copyright © 2013 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-808L User Manual i
  • D-Link DIR-808L | User Manual - Page 3
    Settings 48 Router Settings 48 DHCP Server Settings 49 DHCP Reservation 51 IPv6 52 IPv6 Internet Connection Setup Wizard 54 IPv6 Manual Setup 59 Auto Detection 59 Static IPv6 60 Autoconfiguration 61 PPPoE 62 IPv6 in IPv4 Tunneling 64 6 to 4 Tunneling 65 D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 4
    103 Wireless 104 Routing 105 IPv6 106 IPV6 Routing 107 Support 108 Connect a Wireless Client to your Router 109 WPS Button 109 Windows® 8 110 Windows® 7 112 WPA/WPA2 112 WPS 115 Windows Vista 119 WPA/WPA2 120 WPS/WCN 2.0 122 Windows® XP 123 WPA/WPA2 124 D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 5
    Table of Contents Troubleshooting 126 Reset Router/Forgot Password 127 Wireless Basics 130 What is Wireless 131 Tips 133 Wireless Modes 134 Networking Specifications 139 Contacting Technical Support 140 GPL Code Statement 141 Warranty 153 Registration 160 D-Link DIR-808L User Manual iv
  • D-Link DIR-808L | User Manual - Page 6
    DIR-808L Wireless AC600 Dual Band Cloud Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-808L
  • D-Link DIR-808L | User Manual - Page 7
    operating system • An installed Ethernet adapter or wireless adapter Web-based Configuration Utility Requirements mydlink Requirements Supported Browsers: • Internet Explorer 7 or higher • registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-808L User Manual 2
  • D-Link DIR-808L | User Manual - Page 8
    DIR-808L Wireless AC600 Dual Band Cloud Router provides revolutionary wireless speed - up to 150Mbps (802.11n)/433Mbps (802.11ac) - for flawless HD video streaming to multiple devices. With ground-breaking mydlink Cloud Services adversely affect wireless signal range. D-Link DIR-808L User Manual 3
  • D-Link DIR-808L | User Manual - Page 9
    clip for ten seconds to reset the router to the factory default settings. 4 Power Button Press the power button to power on and off. 5 Power Port Connect the supplied power adapter. 6 WPS Button Press to start the WPS process. The Power LED will start to blink. D-Link DIR-808L User Manual 4
  • D-Link DIR-808L | User Manual - Page 10
    to the Internet port. If the LED is orange, the connection is good but 2 Internet LED the router cannot connect to the Internet. If this LED is blinking orange, this indicates that the "on demand" connection type is set and the Internet connection is idle. D-Link DIR-808L User Manual 5
  • D-Link DIR-808L | User Manual - Page 11
    turn it off for up to 5 minutes. • Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to "bridge" mode so the DIR-808L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. D-Link DIR-808L User Manual 6
  • D-Link DIR-808L | User Manual - Page 12
    to position access points, wireless routers, and computers wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 13
    Network 1. Turn off and unplug your DSL or Cable modem. This is required. Modem 2. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Ethernet Port Ethernet Cable DIR-808L Modem Internet Port (yellow) D-Link DIR-808L User Manual 8
  • D-Link DIR-808L | User Manual - Page 14
    another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. Ethernet Cable Computer DIR-808L 4. Plug the power back into your DSL or Cable modem. Please wait about one minute before continuing. Modem DIR-808L Computer D-Link DIR-808L User Manual 9
  • D-Link DIR-808L | User Manual - Page 15
    Internet (orange or green) LEDs are both lit. Please skip to page 13 to configure your router and use the manual setup procedure to configure your network and wireless settings. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 14). D-Link DIR-808L User Manual 10
  • D-Link DIR-808L | User Manual - Page 16
    , you may want to contact your ISP or manufacturer's user guide to put the router into Bridge mode, which will 'turn off' the router (NAT) functions. If you are connecting the DIR-808L router to an existing router to use as a wireless access point and/or switch, you will have to do the following to
  • D-Link DIR-808L | User Manual - Page 17
    other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Link DIR-808L User Manual 12
  • D-Link DIR-808L | User Manual - Page 18
    configure your router. Refer to page 21 • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 14. • Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 23. D-Link DIR-808L User Manual 13
  • D-Link DIR-808L | User Manual - Page 19
    Next to continue. Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. (See instructions on page 16 for PPPoE, PPTP and L2TP). D-Link DIR-808L User Manual 14
  • D-Link DIR-808L | User Manual - Page 20
    the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to option is commonly used for cable modem services. Click Next to continue. D-Link DIR-808L User Manual 15
  • D-Link DIR-808L | User Manual - Page 21
    PPTP, enter your PPTP User Name, Password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP User Name, Password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-808L User Manual 16
  • D-Link DIR-808L | User Manual - Page 22
    to be able to connect to your wireless network. Click Next to continue. In order to secure your router, enter a new password. Check the Enable Graphical Authentication box if you want to enable CAPTCHA authentication for added security. Click Next to continue. D-Link DIR-808L User Manual 17
  • D-Link DIR-808L | User Manual - Page 23
    zone from the drop-down menu and click Next to continue. The Confirm Wi-Fi Settings window will display your wireless settings. Make a note of this information so you can configure your Wi-Fi devices. Click Next to continue. The Saving Settings window will appear. D-Link DIR-808L User Manual 18
  • D-Link DIR-808L | User Manual - Page 24
    Password. Click Login to register your router. If you clicked No, I want to login with a new mydlink account fill out the requested information and click Sign up to create your mydlink account. This is a free service. Refer to www.mydlink.com for more information. D-Link DIR-808L User Manual 19
  • D-Link DIR-808L | User Manual - Page 25
    your router from an iPhone/iPad/iPod Touch (iOS 3.0 or higher), or Android device (1.6 or higher). To download the "mydlink lite" app, visit the Apple Store, Google Play, or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-808L User Manual 20
  • D-Link DIR-808L | User Manual - Page 26
    your security password (Wi-Fi Password). Step 3 Once you connect to the router, launch the QRS mobile app and it will guide you through the installation of your router. Wi-Fi Name(SSID) 2.4Ghz: dlink-2c19 Wi-Fi Name(SSID) 5GHz: dlink-2C1B-media Password:gccnu80856 D-Link DIR-808L User Manual 21
  • D-Link DIR-808L | User Manual - Page 27
    http://dlinkrouter. Enter your password and click Login. Note: If you did not create a password with the Setup Wizard, leave the password blank by default. D-Link DIR-808L User Manual 22
  • D-Link DIR-808L | User Manual - Page 28
    router to connect to the Internet using the wizard, click Internet Connection Setup Wizard. Refer to page 32. If you consider yourself an advanced user, click Manual Internet Connection Setup to configure your connection manually. (Instructions for manual feature. D-Link DIR-808L User Manual 23
  • D-Link DIR-808L | User Manual - Page 29
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 24
  • D-Link DIR-808L | User Manual - Page 30
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 25
  • D-Link DIR-808L | User Manual - Page 31
    on the Broadband Router. It is not recommended MAC Address: that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 26
  • D-Link DIR-808L | User Manual - Page 32
    and then retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Enter a Maximum Idle Time during which the Internet connection is Time: maintainedduringinactivity.Todisablethisfeature,enableAuto-reconnect. D-Link DIR-808L User Manual 27
  • D-Link DIR-808L | User Manual - Page 33
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 28
  • D-Link DIR-808L | User Manual - Page 34
    to enable anti-phishing protection against DNS Service: fraud and auto-correction of common URL Manual. Maximum Idle Enter a Maximum Idle Time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Auto-reconnect. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 35
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 30
  • D-Link DIR-808L | User Manual - Page 36
    the router allocate Configuration: the AFTR IPv6 address automatically. Select the Manual Configuration option to enter the AFTR IPv6 address in manually. AFTR IPv6 After selecting the Manual WAN Default Gateway address will Default Gateway be displayed here. D-Link DIR-808L User Manual 31
  • D-Link DIR-808L | User Manual - Page 37
    the Quick Setup Wizard, you can click on Internet Connection Setup Wizard from the Setup > Internet screen. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. D-Link DIR-808L User Manual 32
  • D-Link DIR-808L | User Manual - Page 38
    Section 3 - Configuration In order to secure your router, enter a new Password. Click Next to continue. Select your Time Zone from the drop- automatically provides you with an IP Address. This option is commonly used for cable modem services. Click Next to continue. D-Link DIR-808L User Manual 33
  • D-Link DIR-808L | User Manual - Page 39
    ) you can click on Copy Your PC's MAC Address to copy your computer's MAC address to your router. Click Next to continue. If you selected PPPoE, enter your PPPoE User Name, Password, and other software is no longer needed and will not work through a router. D-Link DIR-808L User Manual 34
  • D-Link DIR-808L | User Manual - Page 40
    . Click Next to continue. If you selected L2TP, enter your L2TP User Name, Password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-808L User Manual 35
  • D-Link DIR-808L | User Manual - Page 41
    Section 3 - Configuration If you selected Static, enter the IP Address and DNS settings supplied by your ISP. Click Next to continue. When the setup process is completed, you will see this screen. Click on Connect to save your settings. D-Link DIR-808L User Manual 36
  • D-Link DIR-808L | User Manual - Page 42
    the next page. Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS). Refer to page 40. Click Manual Wireless Network Setup if you want to manually configure the wireless settings on your router. Refer to page 42. D-Link DIR-808L User Manual 37
  • D-Link DIR-808L | User Manual - Page 43
    router will be able to see this information. Then select one of the following options: Automatically: Select this option to automatically generate the router's network key and click Next. Manually: Select this option to manually enter your network key and click Next. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 44
    will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. If you selected Manually, the following will need to enter this passphrase on your wireless clients exactly or it will not connect. D-Link DIR-808L User Manual 39
  • D-Link DIR-808L | User Manual - Page 45
    -Fi Protected Setup) and then click Next. Skip to the next page. If you selected Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. Click OK to finish. This will take you to the Wireless Status screen. D-Link DIR-808L User Manual 40
  • D-Link DIR-808L | User Manual - Page 46
    ) method to add a wireless client. Click Connect. Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. Click OK to finish. This will take you to Wireless Status screen. D-Link DIR-808L User Manual 41
  • D-Link DIR-808L | User Manual - Page 47
    is selected, the SSID of the DIR-808L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-808L in order to connect to it. Wireless Security: Refer to page 44 for more information regarding wireless security. D-Link DIR-808L User Manual 42
  • D-Link DIR-808L | User Manual - Page 48
    is selected, the SSID of the DIR-808L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-808L in order to connect to it. Wireless Security: Refer to page 44 for more information regarding wireless security. D-Link DIR-808L User Manual 43
  • D-Link DIR-808L | User Manual - Page 49
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-808L User Manual 44
  • D-Link DIR-808L | User Manual - Page 50
    must be between 8-63 characters. 7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DIR-808L User Manual 45
  • D-Link DIR-808L | User Manual - Page 51
    (3600 is default). 6. Next to Authentication Timeout enter a time in minutes. 7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. D-Link DIR-808L User Manual 46
  • D-Link DIR-808L | User Manual - Page 52
    If the MAC Address Authentication box is checked, then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 12. Click Save Settings to save your settings. D-Link DIR-808L User Manual 47
  • D-Link DIR-808L | User Manual - Page 53
    Device Name: Enter a name for the router. Local Domain Enter the Domain Name (Optional). Name: Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-808L User Manual 48
  • D-Link DIR-808L | User Manual - Page 54
    be learned from the WAN side, disable to allow manual configuration. from WAN: NetBIOS Scope: This feature allows the configuration of a NetBIOS 'domain' name under which network hosts operates. This setting has no effect if the Learn NetBIOS from WAN is activated. D-Link DIR-808L User Manual 49
  • D-Link DIR-808L | User Manual - Page 55
    Section 3 - Configuration NetBIOS Node Select the type of NetBIOS Node: Broadcast only, Point-to-Point, Mixed-mode, or Hybrid. Type: WINS IP Enter your WINS Server IP Address(es). Address: D-Link DIR-808L User Manual 50
  • D-Link DIR-808L | User Manual - Page 56
    the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note Save: Click Save to save your entry.You must click Save Settings at the top to activate your reservations. DHCP Reservations List Link DIR-808L User Manual 51
  • D-Link DIR-808L | User Manual - Page 57
    a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. (Refer to page 59.) If you would like to manually configure the IPv6 local connectivity settings of your router, click on IPv6 Local Connnectivity Settings. D-Link DIR-808L User Manual 52
  • D-Link DIR-808L | User Manual - Page 58
    Section 3 - Configuration Click on Enable ULA. You can check Use default ULA prefix, or you can leave the box unchecked and enter the prefix manually in the ULA Prefix text box. D-Link DIR-808L User Manual 53
  • D-Link DIR-808L | User Manual - Page 59
    to return to the main page. The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-808L User Manual 54
  • D-Link DIR-808L | User Manual - Page 60
    the Guide me through the IPv6 settings button to initiate the manual continual of the wizard. There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Link DIR-808L User Manual 55
  • D-Link DIR-808L | User Manual - Page 61
    the PPPoE Password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE Password used here. Service Name: Enter the Service Name for this connection here. This field is optional. D-Link DIR-808L User Manual 56
  • D-Link DIR-808L | User Manual - Page 62
    : here. LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-808L User Manual 57
  • D-Link DIR-808L | User Manual - Page 63
    used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to save your settings. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-808L User Manual 58
  • D-Link DIR-808L | User Manual - Page 64
    will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. Click Save Settings. D-Link DIR-808L User Manual 59
  • D-Link DIR-808L | User Manual - Page 65
    the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-808L User Manual 60
  • D-Link DIR-808L | User Manual - Page 66
    the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-808L User Manual 61
  • D-Link DIR-808L | User Manual - Page 67
    optimal performance with your specific ISP. 1492 is the default MTU. IPv6 DNS Settings: Select either Obtain IPv6 DNS servers automatically or Use the following IPv6 DNS servers Primary/Secondary IPv6 Enter the primary and secondary DNS Server addresses. DNS Servers: D-Link DIR-808L User Manual 62
  • D-Link DIR-808L | User Manual - Page 68
    the DHCPv6 range for your Start: local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-808L User Manual 63
  • D-Link DIR-808L | User Manual - Page 69
    the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-808L User Manual 64
  • D-Link DIR-808L | User Manual - Page 70
    the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisemt Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-808L User Manual 65
  • D-Link DIR-808L | User Manual - Page 71
    Check to enable the Autoconfiguration feature. address assignment: Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-808L User Manual 66
  • D-Link DIR-808L | User Manual - Page 72
    Section 3 - Configuration Local Connectivity My IPv6 Connection Select Local Connectivity Only from the drop-down is: menu. LAN IPv6 Link- Displays the LAN IPv6 Link-Local Address of the router. Local Address: Click Save Settings. D-Link DIR-808L User Manual 67
  • D-Link DIR-808L | User Manual - Page 73
    Section 3 - Configuration mydlink Settings The DIR-808L features a cloud service that pushes information such as firmware upgrade notifications, user activity, and intrusion alerts to the mydlink™ app on Android and Apple mobile devices. To insure that your router is up-to-date with the latest
  • D-Link DIR-808L | User Manual - Page 74
    , which allows the service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-808L User Manual 69
  • D-Link DIR-808L | User Manual - Page 75
    in your router. Name: service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 76
    This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. set to Always, which will allow the service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 77
    By default the QoS Engine settings are disabled and application priority is Speed: the data transfer rate from the router to your ISP. This option is enabled by Engine Rules are not required. The QoS Engine supports overlaps between rules, where more than one rule Link DIR-808L User Manual 72
  • D-Link DIR-808L | User Manual - Page 78
    falls within the range set here. Remote Port The rule applies to a flow of messages whose WAN-side port number is within the range set here. Range: Click on the Save Settings button to accept the changes made, or click on Don't Save Settings to discard the changes. D-Link DIR-808L User Manual 73
  • D-Link DIR-808L | User Manual - Page 79
    accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router Save Settings to accept the changes made, or click Don't Save Settings to discard the changes. D-Link DIR-808L User Manual 74
  • D-Link DIR-808L | User Manual - Page 80
    access from applications like P2P utilities or games. Enable Access Check the Enable Access Control box, and then Control: click on Add Policy to start the Wizard. Access Control Wizard The wizard will guide you through a step-by-step process. Click Next to continue. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 81
    PC's MAC Address. Click OK, and click Next to continue. Select a filtering method from Log Web Access Only, Block All Access or Block Some Access. If you choose Block Some Access, check Apply Web Filter and/or Apply Advanced Port Filters. Click Next to continue. D-Link DIR-808L User Manual 76
  • D-Link DIR-808L | User Manual - Page 82
    number. Click Next. To enable Web Access Logging, click Enabled. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. You may click the Edit icon to change the policy, or click the Trash icon to delete the policy. D-Link DIR-808L User Manual 77
  • D-Link DIR-808L | User Manual - Page 83
    Access Control section (pages 75 - 77). Configure Select either DENY computers access to Website Filter: ONLY these sites or ALLOW computers access to ONLY these sites. Website URL/ Enter the keywords or URLs that you want Domain: to allow or block. Click Save Settings. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 84
    IP address. Add: Click the Add button to apply your settings. Inbound Filter This section will list any rules that are created. Rules List: You may click the Edit icon to change the settings or enable/disable the rule, or click the Trash icon to delete the rule. D-Link DIR-808L User Manual 79
  • D-Link DIR-808L | User Manual - Page 85
    Enable DMZ: If an application has trouble working from behind the router, you can Enable DMZ to Settings page so that the IP address of the DMZ machine does not change. PPTP: Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 86
    IPSec. Some VPN clients support traversal of IPSec through NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate devices. If you are having trouble making VoIP calls, try turning this option off. D-Link DIR-808L User Manual 81
  • D-Link DIR-808L | User Manual - Page 87
    1 is the lowest cost and 15 is the highest cost. Interface: Select the Interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-808L User Manual 82
  • D-Link DIR-808L | User Manual - Page 88
    this option to reduce interference from Coexistence: other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless network's channel over-lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-808L User Manual 83
  • D-Link DIR-808L | User Manual - Page 89
    use are quite beneficial, while the highest wireless Security setting of WPA2 is automatically used. Enable: Click router's PIN. You can then copy this PIN to the user interface of the wireless client. Reset PIN to Click to restore the default PIN of the router. Default: D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 90
    with WPS: WPS Button You can also simply press the WPS button on the back of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 109 for more information about WPS. D-Link DIR-808L User Manual WPS Button 85
  • D-Link DIR-808L | User Manual - Page 91
    information about inbound filters.) WAN Port Speed: You may set the port speed of the Internet port to 10Mbps, router from the Internet (IPv4). Enable IPV6 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv6). D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 92
    in the Tools > Schedules section or click Add New. Wireless Enter a Wireless Network Name (SSID) that is Network Name: different from your main wireless network. Enable Routing Check to allow network connectivity between the Between Zones: different zones created. D-Link DIR-808L User Manual 87
  • D-Link DIR-808L | User Manual - Page 93
    the time Schedule that the IPv6 Firewall Rule will be enabled on. The schedule may be set to Always, which will allow this service to always be enabled. You can create your own times in the Tools > Schedules section enter the last port in the field in the second box. D-Link DIR-808L User Manual 88
  • D-Link DIR-808L | User Manual - Page 94
    Name to identify this route. Destination IPv6/ This is the IP address of the router used to reach the Prefix Length: specified destination or enter the IPv6 address prefix length out of the Router. Gateway: Enter the next hop that will be taken if this route is used. D-Link DIR-808L User Manual 89
  • D-Link DIR-808L | User Manual - Page 95
    interface. If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely. Remote Admin Select Allow All or Deny All from the drop-down menu. Inbound Filter: Details: This field will display the current remote admin filter. D-Link DIR-808L User Manual 90
  • D-Link DIR-808L | User Manual - Page 96
    : To manually input the Date and Time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second. Click Save Settings. You can also click Copy Your Computer's Time Settings to synch the date and time with the computer you are currently on. D-Link DIR-808L User Manual 91
  • D-Link DIR-808L | User Manual - Page 97
    the router logs to a SysLog SysLog Server: Server. SysLog Server IP The IP Address of the SysLog server that will be Address: used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-808L User Manual 92
  • D-Link DIR-808L | User Manual - Page 98
    Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Enable Email When this option is enabled, router to Tools > Schedules. Details: Detail will display selected schedule. D-Link DIR-808L User Manual 93
  • D-Link DIR-808L | User Manual - Page 99
    from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save Configuration button above. Reboot the Click to reboot the router. Device: D-Link DIR-808L User Manual 94
  • D-Link DIR-808L | User Manual - Page 100
    Firmware You can check for firmware updates and upgrade the firmware for your router here. Check online for the latest updates by clicking Check Now. Make sure the firmware you want to use is downloaded to the local hard drive of your computer. Firmware access point. D-Link DIR-808L User Manual 95
  • D-Link DIR-808L | User Manual - Page 101
    registered with your DDNS service provider. Username or Enter the Username or Key for your DDNS Key: account. Password or Enter the Password or Key for your DDNS Key: account. Timeout: Enter a Timeout time (in hours). Status: Displays the current connection status. D-Link DIR-808L User Manual 96
  • D-Link DIR-808L | User Manual - Page 102
    server from the drop-down list. Host Name: Enter the IPv6 Host Name that you registered with your DDNS service provider. Click Save. IPv6 DDNS After you save your entry, the IPv6 DDNS host List: information will be entry or click the trash icon to delete the entry. D-Link DIR-808L User Manual 97
  • D-Link DIR-808L | User Manual - Page 103
    that you wish to Ping and click Ping. Host Name or IPv6 Address: Ping Result: The results of your ping attempts will be displayed here. D-Link DIR-808L User Manual 98
  • D-Link DIR-808L | User Manual - Page 104
    Schedules Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, icon to make changes or click the Trash icon to delete the schedule. D-Link DIR-808L User Manual 99
  • D-Link DIR-808L | User Manual - Page 105
    Name (SSID) and Channel. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Displays IPv4 and IPv6 Multicast Group Addresses. Memberships: D-Link DIR-808L User Manual 100
  • D-Link DIR-808L | User Manual - Page 106
    the level of the events to view. This router also has external Syslog Server support so you can send the log files to a router log to your email address configured in the Tools > Email Settings page. Save Log: This option will save the router log to a local hard drive. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 107
    3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-808L on both the WAN, LAN ports and the Wi-Fi® segments. The traffic counter will reset if the device is rebooted. D-Link DIR-808L User Manual 102
  • D-Link DIR-808L | User Manual - Page 108
    Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-808L User Manual 103
  • D-Link DIR-808L | User Manual - Page 109
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection rate and MAC address of the connected wireless clients. D-Link DIR-808L User Manual 104
  • D-Link DIR-808L | User Manual - Page 110
    Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-808L User Manual 105
  • D-Link DIR-808L | User Manual - Page 111
    Section 3 - Configuration IPv6 The IPv6 Status page displays a summary of the Router's IPv6 connection details, and displays the IPv6 Address and host Name (if any) for IPv6 clients. D-Link DIR-808L User Manual 106
  • D-Link DIR-808L | User Manual - Page 112
    Section 3 - Configuration IPV6 Routing This page displays the IPV6 routing details configured for your router. D-Link DIR-808L User Manual 107
  • D-Link DIR-808L | User Manual - Page 113
    Section 3 - Configuration Support D-Link DIR-808L User Manual 108
  • D-Link DIR-808L | User Manual - Page 114
    printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-808L router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below: Step
  • D-Link DIR-808L | User Manual - Page 115
    -right corner next to the time). 2. A list of available wireless networks will appear. 3. Click the wireless network (SSID) you want to connect to and then click Connect. 4. If the network is secure/encrypted, enter the Wi-Fi password (security key) and click Next. D-Link DIR-808L User Manual 110
  • D-Link DIR-808L | User Manual - Page 116
    to your wireless network. If you get a good signal but cannot access the Internet, confirm the encryption by reviewing the profile or check the TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-808L User Manual 111
  • D-Link DIR-808L | User Manual - Page 117
    to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 118
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-808L User Manual 113
  • D-Link DIR-808L | User Manual - Page 119
    connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-808L User Manual 114
  • D-Link DIR-808L | User Manual - Page 120
    4 - Security WPS The WPS feature of the DIR-808L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-808L User Manual 115
  • D-Link DIR-808L | User Manual - Page 121
    Section 4 - Security 3. Double-click the DIR-808L. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-808L User Manual 116
  • D-Link DIR-808L | User Manual - Page 122
    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-808L User Manual 117
  • D-Link DIR-808L | User Manual - Page 123
    The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-808L User Manual 118
  • D-Link DIR-808L | User Manual - Page 124
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-808L User Manual 119
  • D-Link DIR-808L | User Manual - Page 125
    . 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-808L User Manual 120
  • D-Link DIR-808L | User Manual - Page 126
    that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-808L User Manual 121
  • D-Link DIR-808L | User Manual - Page 127
    choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-808L User Manual 122
  • D-Link DIR-808L | User Manual - Page 128
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-808L User Manual 123
  • D-Link DIR-808L | User Manual - Page 129
    the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-808L User Manual 124
  • D-Link DIR-808L | User Manual - Page 130
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-808L User Manual 125
  • D-Link DIR-808L | User Manual - Page 131
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-808L User Manual 126
  • D-Link DIR-808L | User Manual - Page 132
    powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. To re-configure the router, refer to page 13. D-Link DIR-808L User Manual Reset Router/Forgot Password Reset 127
  • D-Link DIR-808L | User Manual - Page 133
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-808L User Manual 128
  • D-Link DIR-808L | User Manual - Page 134
    Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-808L User Manual 129
  • D-Link DIR-808L | User Manual - Page 135
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-808L User Manual 130
  • D-Link DIR-808L | User Manual - Page 136
    point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 137
    up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-808L User Manual 132
  • D-Link DIR-808L | User Manual - Page 138
    Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/ access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DIR-808L User Manual 133
  • D-Link DIR-808L | User Manual - Page 139
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 140
    IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-808L User Manual 135
  • D-Link DIR-808L | User Manual - Page 141
    . • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 142
    • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-808L User Manual 137
  • D-Link DIR-808L | User Manual - Page 143
    network. • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-808L User Manual 138
  • D-Link DIR-808L | User Manual - Page 144
    • One Reset Button Security • Wi-Fi Protected Access (WPA/WPA2) • WPS™ LEDs • Power/WPS Limited Warranty 1 Maximum wireless signal rate derived from IEEE Standard 802.11ac (draft), 802.11a wireless signal range. 2 Frequency Range varies depending on country's regulation D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 145
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-808L User Manual 140
  • D-Link DIR-808L | User Manual - Page 146
    of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code verbatim copies of this license document, but changing it is not allowed. D-Link DIR-808L User Manual 141
  • D-Link DIR-808L | User Manual - Page 147
    marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions terms and conditions for copying, distribution and modification follow. D-Link DIR-808L User Manual 142
  • D-Link DIR-808L | User Manual - Page 148
    a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. D-Link DIR-808L User Manual 143
  • D-Link DIR-808L | User Manual - Page 149
    source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-808L User Manual 144
  • D-Link DIR-808L | User Manual - Page 150
    Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Legal Notices, your work need not make them do so. D-Link DIR-808L User Manual 145
  • D-Link DIR-808L | User Manual - Page 151
    compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object Link DIR-808L User Manual 146
  • D-Link DIR-808L | User Manual - Page 152
    not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access Link DIR-808L User Manual 147
  • D-Link DIR-808L | User Manual - Page 153
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who or stated as exceptions; the above requirements apply either way. D-Link DIR-808L User Manual 148
  • D-Link DIR-808L | User Manual - Page 154
    possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-808L User Manual 149
  • D-Link DIR-808L | User Manual - Page 155
    of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange of the covered work and works based on it. D-Link DIR-808L User Manual 150
  • D-Link DIR-808L | User Manual - Page 156
    will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a permanently authorizes you to choose that version for the Program. D-Link DIR-808L User Manual 151
  • D-Link DIR-808L | User Manual - Page 157
    NECESSARY SERVICING, REPAIR reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 158
    Link at an Authorized D-Link Service Office. The replacement Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 159
    to D-Link's then current functional specifications for the Software, as set forth the product to the original purchase point based on its return policy. In must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt dlink.com/. D-Link DIR-808L User Manual 154
  • D-Link DIR-808L | User Manual - Page 160
    a Case ID Number from D-Link Technical Support at 1-800-361-5265, who ID Number at https://rma.dlink.ca/. • After an RMA manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 161
    BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-808L User Manual 156
  • D-Link DIR-808L | User Manual - Page 162
    . Copyright ©2013 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-808L User Manual 157
  • D-Link DIR-808L | User Manual - Page 163
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-808L User Manual
  • D-Link DIR-808L | User Manual - Page 164
    set forth for an uncontrolled environment. End users must follow the specific operating instructions MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In périphérique. D-Link DIR-808L User Manual 159
  • D-Link DIR-808L | User Manual - Page 165
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 July 16, 2013 D-Link DIR-808L User Manual 160
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
User Manual
Version 1.0
|
July 16, 2013
DIR-808L
Wireless AC600
Dual Band Cloud Router