D-Link DIR-813 User Manual

D-Link DIR-813 Manual

Get D-Link DIR-813 PDF manuals and user guides View all D-Link DIR-813 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-813 manual content summary:

  • D-Link DIR-813 | User Manual - Page 1
    Version 2.00 | September 17, 2015 User Manual AC750 Wi-Fi Router DIR-813
  • D-Link DIR-813 | User Manual - Page 2
    herein are trademarks or registered trademarks of their respective companies. Copyright © 2015 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-813 User Manual i
  • D-Link DIR-813 | User Manual - Page 3
    Wireless Installation Considerations 6 Manual Setup 7 Configuration 10 Setup Wizard 10 Web-based Configuration Utility 14 Internet Setup 15 Static (assigned and Date 39 Firmware Update 40 Language Pack 40 Dynamic DNS (DDNS 41 System Check 42 Device Info 43 D-Link DIR-813 User Manual ii
  • D-Link DIR-813 | User Manual - Page 4
    Troubleshooting 63 Wireless Basics 67 What is Wireless 68 Tips...70 Wireless Modes 71 Networking Basics 72 Check your IP address 72 Windows® 8 Users 72 Windows® 7/Vista® Users 72 Statically Assign an IP address 73 Windows® 8 Users 73 Windows® 7/ Vista® Users 74 D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 5
    Section 1 - Product Overview Package Contents • D-Link DIR-813 AC750 Wi-Fi Router • Power Adapter • Quick Install Guide • Ethernet Cable • Wi-Fi Configuration Card Note: Using a power supply with a different voltage rating than the one included with the DIR-813 will cause damage and void the
  • D-Link DIR-813 | User Manual - Page 6
    Overview Introduction The DIR-813 AC750 Wi-Fi Router is an affordable yet powerful wireless networking solution which combines the latest high-speed 802.11ac Wi-Fi specification with dual- rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-813 User Manual 2
  • D-Link DIR-813 | User Manual - Page 7
    will 4 WPS/Reset Button turn solid green when successfully connecting to a device. Reset - Press and hold the reset button for eight seconds to reset the router back to the factory default settings. D-Link DIR-813 User Manual 3
  • D-Link DIR-813 | User Manual - Page 8
    light will blink during data transmission. 5 LAN LEDs (1-4) A solid green light indicates a connection to a device is working properly. The LED will blink during data transmission. D-Link DIR-813 User Manual 4
  • D-Link DIR-813 | User Manual - Page 9
    it off for up to five minutes. • Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to "bridge" mode so the DIR-813 router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. D-Link DIR-813 User Manual 5
  • D-Link DIR-813 | User Manual - Page 10
    range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter's range from 3- base transmits a signal even if the phone in not in use. D-Link DIR-813 User Manual 6
  • D-Link DIR-813 | User Manual - Page 11
    Section 2 - Installation Manual Setup For best results, place the router in an open area of your intended an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Modem 1 2 3 4 WPS INTERNET 5V --1A POWER DIR-813 D-Link DIR-813 User Manual 7
  • D-Link DIR-813 | User Manual - Page 12
    . You can also connect wirelessly to the router with your computer. Use the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password of the router. Complete steps 4 and 5 before attempting to connect. 1 2 3 4 DIR-813 WPS INTERNET 5V --1A POWER Computer 4. Plug
  • D-Link DIR-813 | User Manual - Page 13
    wirelessly, you may now connect to the router using the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password. 6. After the router has powered up, verify that the Power and Internet LEDs are both lit. Proceed with router configuration. D-Link DIR-813 User Manual 9
  • D-Link DIR-813 | User Manual - Page 14
    Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkrouter.local./ or the IP address of the router (http://192.168.0.1). 2. Enter your router password. If you have not created a password yet, leave the password blank and click Login to continue. D-Link DIR-813 User Manual 10
  • D-Link DIR-813 | User Manual - Page 15
    (dynamic) is most commonly used with cable Internet, PPPoE (common with DSL), or Static. If you selected DSL (PPPoE), enter your PPPoE user name and password supplied by your ISP (Internet Service Provider). D-Link DIR-813 User Manual 11
  • D-Link DIR-813 | User Manual - Page 16
    and 5GHz bands, create a name for your Wi-Fi Network and a password. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network. Click Connect at the bottom to continue. D-Link DIR-813 User Manual 12
  • D-Link DIR-813 | User Manual - Page 17
    Section 3 - Configuration 5. Your router will now connect to the Internet. Please allow 1-2 minutes. Once the Setup is Completed message appears, click Complete. D-Link DIR-813 User Manual 13
  • D-Link DIR-813 | User Manual - Page 18
    then enter your password (Leave the password blank by default). Click Log In to continue. The Setup > Internet page will appear. You can now navigate to the settings your want to configure. If you want to run the setup wizard again, click Easy Setup on the left side. D-Link DIR-813 User Manual 14
  • D-Link DIR-813 | User Manual - Page 19
    3 - Configuration Internet Setup Static (assigned by your ISP. Default Gateway: Enter the Gateway assigned by your ISP. MAC Address: The default MAC Address is set to the WAN's physical interface MAC address on the Broadband Router. Copy ISP. 1492 is the default MTU. D-Link DIR-813 User Manual 15
  • D-Link DIR-813 | User Manual - Page 20
    router. DNS These addresses will be assigned automatically from your ISP. Addresses: You can manually enter DNS servers if you do not want to use what is assigned to you. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. D-Link DIR-813
  • D-Link DIR-813 | User Manual - Page 21
    feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Connection Mode Select Always on for most ISPs or select Manual or Connection on demand. Select: D-Link DIR-813 User Manual 17
  • D-Link DIR-813 | User Manual - Page 22
    with a username and password. PPTP: Select Dynamic Service Provider.) MAC Address: The default MAC Address is set to the WAN's physical interface MAC address on the Broadband Router Mode Select Always on for most ISPs or select Manual or Connection Select: on demand. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 23
    password. This option is typically used for DSL services Service Provider.) MAC Address: The default MAC Address is set to the WAN's physical interface MAC address on the Broadband Router Mode Select Always on for most ISPs or select Manual or Connection Select: on demand. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 24
    Wi-Fi Multimedia to enjoy basic quality of service features. WMM prioritizes traffic according to four access categories: voice, video, best effort, and background. Enable Hidden Check this option if you would not like the SSID of your wireless Wireless: network to be broadcasted by the DIR-813
  • D-Link DIR-813 | User Manual - Page 25
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-813 User Manual 21
  • D-Link DIR-813 | User Manual - Page 26
    on all other wireless clients. 5. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA/WPA2-PSK on your adapter and enter the same Wi-Fi password as you did on the router. D-Link DIR-813 User Manual 22
  • D-Link DIR-813 | User Manual - Page 27
    the local network settings of the router and to configure the DHCP settings. Router IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If computers will use the router for a DNS server. Refer to the next page for DHCP information. D-Link DIR-813 User Manual 23
  • D-Link DIR-813 | User Manual - Page 28
    address lease. Enter the Lease Time: time in minutes (default setting is 1440). DHCP Client List: Displays the name, IP address, MAC Address, and lease time of devices currently assigned IP settings by the router. Refer to the next page to set up DHCP reservations. D-Link DIR-813 User Manual 24
  • D-Link DIR-813 | User Manual - Page 29
    computer or device to always have the same IP address assigned, you can create a DHCP Reservation. The router will assign the IP address only to that computer or device. Note that this IP address must be within . Save Settings: Click Save Settings to save your entry. D-Link DIR-813 User Manual 25
  • D-Link DIR-813 | User Manual - Page 30
    : Enter the IP address of the computer on your local network that you want to allow the incoming service to. Computer Select a computer or device on your network from the dropName: down menu and then click your local network. Traffic Type: Select TCP, UDP, or Any. D-Link DIR-813 User Manual 26
  • D-Link DIR-813 | User Manual - Page 31
    Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Computer Select a computer or device on your network from the dropName: down menu and then click exactly the same. Traffic Type: Select TCP, UDP, or Any. D-Link DIR-813 User Manual 27
  • D-Link DIR-813 | User Manual - Page 32
    the firewall (public) ports associated with the trigger port to open them for inbound traffic. The DIR-813 provides some predefined applications in the table on the bottom of the web page. Select the application or port ranges. Traffic Type: Select TCP, UDP, or Any. D-Link DIR-813 User Manual 28
  • D-Link DIR-813 | User Manual - Page 33
    can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Router. Configure manual. DHCP Client Select a DHCP client from the drop-down menu and click the List:
  • D-Link DIR-813 | User Manual - Page 34
    Filtering ON and DENY computers access to ONLY sites listed. URL: Enter a website you want to either block or allow. When finished, click Save Settings. D-Link DIR-813 User Manual 30
  • D-Link DIR-813 | User Manual - Page 35
    also can setup manually. Enable manually: Key in upload Manually enter the upload bandwidth. bandwidth manually: Traffic Control Rules: When the option Automatic Distribute Bandwidth is unchecked, you can control the access bandwidth of the specific device on your network. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 36
    address. Protocol: Select the transport protocol that will be used for the filter rule. Port Range: Enter the desired port range for the filter rule. D-Link DIR-813 User Manual 32
  • D-Link DIR-813 | User Manual - Page 37
    any changes to the factory default settings may adversely affect the behavior of your network. Transmit Power: Set the transmit power of the antennas. Wireless Mode: Select one of the -lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-813 User Manual 33
  • D-Link DIR-813 | User Manual - Page 38
    any changes to the factory default settings may adversely affect the behavior of your network. Transmit Power: Set the transmit power of the antennas. Wireless Mode: Select one of the -lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-813 User Manual 34
  • D-Link DIR-813 | User Manual - Page 39
    allows you to change the LAN settings. Please be aware that any changes to the factory default settings may affect the behavior of your network. Enable UPnP: Check this box to enable to allow multicast traffic to pass through Streams: the router from the Internet. D-Link DIR-813 User Manual 35
  • D-Link DIR-813 | User Manual - Page 40
    change the PIN to the factory default PIN. Make sure to click Save Settings to save the new or default PIN. Wi-Fi Protected Displays the current WPS status on the router. Status: Add Wireless Click to start the Add a Wireless Device with WPS wizard. Device with WPS: D-Link DIR-813 User Manual 36
  • D-Link DIR-813 | User Manual - Page 41
    Remote Management. Administrator Enter a new password for the Administrator Login Name and Password: then retype the new password in the Confirm Password box. The administrator can make changes to the settings. Enable Remote Remote management allows the DIR-813 to be configured Management: from the
  • D-Link DIR-813 | User Manual - Page 42
    , including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot the Click to reboot the router. Device: Clear Language Click to remove all non-default language packs from the Pack: router. D-Link DIR-813 User Manual 38
  • D-Link DIR-813 | User Manual - Page 43
    to configure, update, and settings to the router. NTP Server Click the Automatically synchronize with D-Link's Used: Internet Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second. Click Save Settings. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 44
    Firmware Update You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink
  • D-Link DIR-813 | User Manual - Page 45
    ) The router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a Password or Key: Enter the password or key given to you by your DDNS server. Timeout: Enter a timeout time (in hours). Status: Displays the connection status of your DDNS account. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 46
    returns by allowing users to easily troubleshoot their cable connections. Ping Test: The Ping Test is used to send ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to test and click Ping. Ping Result: Displays the ping results. D-Link DIR-813 User Manual 42
  • D-Link DIR-813 | User Manual - Page 47
    /ISP IP settings for the router. Wireless 2.4GHz: Displays your wireless settings such as SSID, Channel, and Encryption status for the 2.4GHz segment. Wireless 5GHz: Displays your wireless settings such as SSID, Channel, and Encryption status for the 5GHz segment. D-Link DIR-813 User Manual 43
  • D-Link DIR-813 | User Manual - Page 48
    3 - Configuration Log This window allows you to view a log of activities on the Router. This is especially helpful detecting unauthorized network usage. Log Type: Select the type of : View the previous page. Next Page: View the next page. Clear: Clear the log. D-Link DIR-813 User Manual 44
  • D-Link DIR-813 | User Manual - Page 49
    Section 3 - Configuration Statistics The window below displays the traffic statistics on your router. D-Link DIR-813 User Manual 45
  • D-Link DIR-813 | User Manual - Page 50
    Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-813 User Manual 46
  • D-Link DIR-813 | User Manual - Page 51
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection rate and MAC address of the connected wireless clients. D-Link DIR-813 User Manual 47
  • D-Link DIR-813 | User Manual - Page 52
    Section 3 - Configuration Support Click the desired hyperlink to get more information about how to use the Router. D-Link DIR-813 User Manual 48
  • D-Link DIR-813 | User Manual - Page 53
    is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-813 router. Please refer to your user manual for the
  • D-Link DIR-813 | User Manual - Page 54
    WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To the desired network by clicking on the network name. Wireless Icon D-Link DIR-813 User Manual 50
  • D-Link DIR-813 | User Manual - Page 55
    prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function
  • D-Link DIR-813 | User Manual - Page 56
    WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-813 User Manual 52
  • D-Link DIR-813 | User Manual - Page 57
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-813 User Manual 53
  • D-Link DIR-813 | User Manual - Page 58
    also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-813 User Manual 54
  • D-Link DIR-813 | User Manual - Page 59
    4 - Security WPS The WPS feature of the DIR-813 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-813 User Manual 55
  • D-Link DIR-813 | User Manual - Page 60
    Section 4 - Security 3. Double-click the DIR-813. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-813 User Manual 56
  • D-Link DIR-813 | User Manual - Page 61
    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-813 User Manual 57
  • D-Link DIR-813 | User Manual - Page 62
    8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-813 User Manual 58
  • D-Link DIR-813 | User Manual - Page 63
    wireless utility. If you are using another company's utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have Refer to the Networking Basics section in this manual for more information. D-Link DIR-813 User Manual 59
  • D-Link DIR-813 | User Manual - Page 64
    WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-813 User Manual 60
  • D-Link DIR-813 | User Manual - Page 65
    passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-813 User Manual 61
  • D-Link DIR-813 | User Manual - Page 66
    or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-813 User Manual 62
  • D-Link DIR-813 | User Manual - Page 67
    Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-813. Read the following descriptions if you are having problems • Make sure you have an updated Java-enabled web browser. We recommend Link DIR-813 User Manual 63
  • D-Link DIR-813 | User Manual - Page 68
    to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-813 User Manual 64
  • D-Link DIR-813 | User Manual - Page 69
    Section 12 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-813 User Manual 65
  • D-Link DIR-813 | User Manual - Page 70
    on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click the Save Settings button to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 71
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-813 User Manual 67
  • D-Link DIR-813 | User Manual - Page 72
    using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless? D-Link is the worldwide school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-813 User Manual 68
  • D-Link DIR-813 | User Manual - Page 73
    popular in recent years that almost everyone is using it, whether it's for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access • Surf the web, printer with multiple computers • No need to dedicate office space D-Link DIR-813 User Manual 69
  • D-Link DIR-813 | User Manual - Page 74
    setup support all AP and wireless STA if they work in the same wireless channel. • AP-repeater (AP with WDS): only repeat same model or limited models which base on the same proprietary protocol. Please choose a universal repeater to boost the signal to extend the range. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 75
    Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless Cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-813 User Manual 71
  • D-Link DIR-813 | User Manual - Page 76
    the IP address, subnet mask, and default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-813 User Manual 72
  • D-Link DIR-813 | User Manual - Page 77
    . • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-813 User Manual 73
  • D-Link DIR-813 | User Manual - Page 78
    . • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-813 User Manual 74
  • D-Link DIR-813 | User Manual - Page 79
    • WPA & WPA2 (Wi-Fi Protected Access) • Wi-Fi Protected Setup (WPS) PIN/PBC External setup wizard • Green Ethernet • Web Setup Wizard • Dual Active Firewall (IPv4/IPv6) • Stack Network Address Translation (NAT) • Stateful Packet Inspection (SPI) • Wireless Repeater D-Link DIR-813 User Manual 75
  • D-Link DIR-813 | User Manual - Page 80
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-813 User Manual 76
  • D-Link DIR-813 | User Manual - Page 81
    Link at an Authorized D-Link Service Office. The replacement Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 82
    the product is not registered. • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects and entering the assigned Case ID Number at https:// rma.dlink.com/. D-Link DIR-813 User Manual 78
  • D-Link DIR-813 | User Manual - Page 83
    a receipt, no warranty service will be done. The Number from D-Link Technical Support at 1-800-361 https://rma.dlink.ca/. • manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 84
    software, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-813 User Manual 80
  • D-Link DIR-813 | User Manual - Page 85
    notice. Copyright ©2015 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-813 User Manual 81
  • D-Link DIR-813 | User Manual - Page 86
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-813 User Manual
  • D-Link DIR-813 | User Manual - Page 87
    forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed and operated les interférences pouvant perturber le bon fonctionnement de ce périphérique. D-Link DIR-813 User Manual 83
  • D-Link DIR-813 | User Manual - Page 88
    Appendix E - Warranty Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.00 September 17, 2015 D-Link DIR-813 User Manual 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
User Manual
Version 2.00
|
September 17, 2015
DIR-813
AC750
Wi-Fi Router