D-Link DIR-817LW Setup Guide

D-Link DIR-817LW Manual

Get D-Link DIR-817LW PDF manuals and user guides View all D-Link DIR-817LW manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-817LW manual content summary:

  • D-Link DIR-817LW | Setup Guide - Page 1
    Users - If your ISP provided you with a modem/router combo, you will need to set it to "bridge" mode so the DIR-817LW/818LW router can work properly. Please contact your ISP or refer to the user manual for your modem/ router device. Connect your Router 1 Unplug the power to your DSL or Cable modem
  • D-Link DIR-817LW | Setup Guide - Page 2
    (no password by default). 3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to create a new Wi-Fi network name (SSID) and Wi-Fi password. Documentation is available at http://www.dlink.com Technical Support Having trouble installing your new product? D-Link's website contains
  • 1
  • 2
ENGLISH
12V
WPS
1
2
3
LAN
4
INTERNET
POWER
USB
12V
2A
WPS
1
2
3
LAN
4
INTERNET
POWER
USB
12V
WPS
1
2
3
LAN
4
INTERNET
POWER
USB
DIR-817LW/818LW
Wireless AC750
Dual Band Cloud Router
If any of the above items are missing, please contact your reseller.
DIR-817LW Dual Band Fast Ethernet Cloud Router or
DIR-818LW Dual Band Gigabit Cloud Router
Power Adapter
Ethernet Cable
Wi-Fi Configuration Card
Quick Install Guide
3
5
1
Unplug the power to your DSL or Cable modem.
2
Connect an Ethernet cable from the Internet port of the router to the
Ethernet port on your DSL or Cable modem.
3
Connect another Ethernet cable from the Ethernet port on your
computer to one of the LAN ports on the router.
4
Plug the power back into your DSL or cable modem. Please wait about
one minute before continuing.
5
Plug the power adapter into your router and connect to an available
power outlet or surge protector. If the Power LED does not light up, press
the Power button on the back of the router.
T
Modem
Modem
DIR-817LW/818LW
DIR-817LW/818LW
Computer
Modem
DIR-817LW/818LW
Computer
Package Contents
Hardware Overview
Minimum Requirements
Connect your Router
12V
2A
WPS
1
2
3
LAN
4
INTERNET
POWER
USB
6
After the router has powered up, verify that the Power (green) and Internet
(orange or green) LEDs are both lit then continue with the
Configuration
section on the other side.
Modem
DIR-817LW/818LW
Computer
Ethernet Port
Ethernet Cable
Internet Port (yellow)
Ethernet Cable
•
Users with DSL providers
- If you are using a PPPoE connection, you will need
your PPPoE user name and password. If you do not have this information, contact
your Internet provider. Do not proceed until you have this information.
•
Users with Cable providers
- Make sure you unplug the power to your modem.
In some cases, you may need to turn it off for up to five minutes.
•
Advanced Users
- If your ISP provided you with a modem/router combo, you
will need to set it to “bridge” mode so the DIR-817LW/818LW router can work
properly. Please contact your ISP or refer to the user manual for your modem/
router device.
Before you Start
Network Requirements:
• An Ethernet-based broadband modem
Web-based Configuration Requirements:
Computer with the following:
• Windows® 8, 7, Vista®, XP SP3, or Mac OS® X (v10.4)
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
Make sure you have the latest version of Java installed. Visit
www.java.com
to download the latest version.
mydlink Requirements:
For mydlink and mydlink app requirements refer to:
1
2
4
6
8
7
9
1
Power LED
A solid green light indicates a proper connection to the
power supply. The light will be solid orange during boot-up
and will blink green during the WPS process.
2
Internet LED
A solid light indicates a connection to the Internet port. If
the LED is orange, the connection is good but the router
cannot connect to the Internet. If this LED is blinking
orange, this indicates that the “on demand” connection
type is set and the Internet connection is idle.
3
USB Port
Connect a USB flash drive to share content throughout
your network.
4
WPS Button
Press the WPS button to start the WPS process. The Power
LED will start to blink.
5
LAN Ports (1-4)
Connect Ethernet devices such as computers, switches,
and video game consoles.
6
Internet Port
Connect your broadband modem to this port using an
Ethernet cable.
7
Power Button
Press the power button to power the router on and off.
8
Power Port
Connect the supplied power adapter to this port.
9
Reset Button
Press and hold the reset button with a paper clip for six
seconds to reset the router to the factory default settings.