D-Link DIR-860L User Manual

D-Link DIR-860L Manual

Get D-Link DIR-860L PDF manuals and user guides View all D-Link DIR-860L manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-860L manual content summary:

  • D-Link DIR-860L | User Manual - Page 1
    Version 1.0 | April 19, 2013 User Manual Wireless AC1200 Dual Band Gigabit Cloud Router DIR-860L
  • D-Link DIR-860L | User Manual - Page 2
    are trademarks or registered trademarks of their respective companies. Copyright © 2013 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-860L User Manual i
  • D-Link DIR-860L | User Manual - Page 3
    50 Network Settings 52 Router Settings 52 DHCP Server Settings 53 DHCP Reservation 55 Storage 56 Access Files from the Internet 57 Media Server 58 IPv6 59 IPv6 Internet Connection Setup Wizard 61 IPv6 Manual Setup 66 Auto Detection 66 Static IPv6 67 D-Link DIR-860L User Manual ii
  • D-Link DIR-860L | User Manual - Page 4
    Logs 108 Statistics 109 Internet Sessions 110 Wireless 111 Routing 112 IPv6 113 IPV6 Routing 114 Support 115 Connect a Wireless Client to your Router 116 WPS Button 116 Windows® 8 117 Windows® 7 119 WPA/WPA2 119 WPS 122 Windows Vista 126 WPA/WPA2 127 D-Link DIR-860L User Manual iii
  • D-Link DIR-860L | User Manual - Page 5
    ® XP 130 WPA/WPA2 131 Troubleshooting 133 Reset Router/Forgot Password 134 Wireless Basics 137 What is Wireless 138 Tips 140 Wireless Modes 141 Networking Basics 142 Check your IP address 142 Windows® 8 Users 142 Windows® 7/Vista® Users 142 Windows® XP Users 142 Statically Assign an IP
  • D-Link DIR-860L | User Manual - Page 6
    DIR-860L Wireless AC1200 Dual Band Gigabit Cloud Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-860L
  • D-Link DIR-860L | User Manual - Page 7
    wireless adapter Web-based Configuration Utility Requirements mydlink Requirements Supported Browsers: • Internet Explorer 7 or higher • Firefox • Safari 4 or higher • Chrome Windows® Users registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-860L User Manual 2
  • D-Link DIR-860L | User Manual - Page 8
    alerts when unauthorized connections are attempted. With SharePort Mobile, wirelessly access your media on your iPhone, iPad or Android device from any connected USB drive. Best throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-860L User Manual 3
  • D-Link DIR-860L | User Manual - Page 9
    to this port. 5 Power Button Press the power button to power on and off. 6 Power Receptor Receptor for the supplied power adapter. 7 Reset Button Press and hold the reset button with a paper clip for 10 seconds to reset the router to the default factory settings. D-Link DIR-860L User Manual 4
  • D-Link DIR-860L | User Manual - Page 10
    connection to the Internet port. If the LED is orange, the connection is good but the router 2 Internet LED cannot connect to the Internet. If this LED is blinking orange, this indicates that the "on demand" connection type is set and the Internet connection is idle. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 11
    to turn it off for up to 5 minutes. • Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to "bridge" mode so the DIR-860L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 12
    on range. Try to position access points, wireless routers, wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 13
    Cable modem. This is required. Modem 2. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Ethernet Cable Ethernet Port Modem USB WPS 1 2 LAN 3 4 INTERNET POWER 12V 2A DIR-860L Internet Port (yellow) D-Link DIR-860L User Manual 8
  • D-Link DIR-860L | User Manual - Page 14
    ports on the router. USB WPS 1 2 LAN 3 4 INTERNET POWER 12V 2A DIR-860L Ethernet Cable Computer 4. Plug the power back into your DSL or Cable modem. Please wait about one minute before continuing. Modem USB WPS 1 2 LAN 3 4 INTERNET POWER 12V 2A DIR-860L Computer D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 15
    Internet (orange or green) LEDs are both lit. Please skip to page 13 to configure your router and use the manual setup procedure to configure your network and wireless settings. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 14). D-Link DIR-860L User Manual 10
  • D-Link DIR-860L | User Manual - Page 16
    , you may want to contact your ISP or manufacturer's user guide to put the router into Bridge mode, which will 'turn off' the router (NAT) functions. If you are connecting the DIR-860L router to an existing router to use as a wireless access point and/or switch, you will have to do the following
  • D-Link DIR-860L | User Manual - Page 17
    connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 18
    configure your router. Refer to page 21 • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 14. • Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 27. D-Link DIR-860L User Manual 13
  • D-Link DIR-860L | User Manual - Page 19
    Next to continue. Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. (See instructions on page 16 for PPPoE, PPTP and L2TP). D-Link DIR-860L User Manual 14
  • D-Link DIR-860L | User Manual - Page 20
    types to choose from. Select your Internet connection type. You can select DHCP Connection (Dynamic IP Address) if your Internet connection automatically provides you with an IP Address. This option is commonly used for cable modem services. Click Next to continue. D-Link DIR-860L User Manual 15
  • D-Link DIR-860L | User Manual - Page 21
    PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-860L User Manual 16
  • D-Link DIR-860L | User Manual - Page 22
    key entered to be able to connect to your wireless network. Click Next to continue. In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. D-Link DIR-860L User Manual 17
  • D-Link DIR-860L | User Manual - Page 23
    your wireless settings. Click Next to continue. If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 24
    password. Click Login to register your router. If you clicked No, I want to login with a new mydlink account fill out the requested information and click Sign up to create your mydlink account. This is a free service. Refer to www.mydlink.com for more information. D-Link DIR-860L User Manual 19
  • D-Link DIR-860L | User Manual - Page 25
    your router from an iPhone/iPad/iPod Touch (iOS 3.0 or higher), or Android device (1.6 or higher). To download the "mydlink lite" app, visit the Apple Store, Google Play or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-860L User Manual 20
  • D-Link DIR-860L | User Manual - Page 26
    your security password (Wi-Fi Password). Step 3 Once you connect to the router, launch the QRS mobile app and it will guide you through the installation of your router. Wi-Fi Name(SSID) 2.4Ghz: dlink-2c19 Wi-Fi Name(SSID) 5GHz: dlink-2C1B-media Password:gccnu80856 D-Link DIR-860L User Manual 21
  • D-Link DIR-860L | User Manual - Page 27
    ) for this app to work properly. 1. Insert your USB flash drive into DIR-860L. 2. Scan the bar code to download the SharePort Mobile app from the app store to your iPhone, iPad, or Android device. iOS Android 3. From your iOS mobile device, click Settings. D-Link DIR-860L User Manual Settings 22
  • D-Link DIR-860L | User Manual - Page 28
    Section 3 - Configuration 4. Click Wi-Fi, select the wireless network (SSID) that you created in the setup and then enter your Wi-Fi password. 5. Once connected, click on the SharePort Mobile icon. 6. The following screen will appear. D-Link DIR-860L User Manual 23
  • D-Link DIR-860L | User Manual - Page 29
    to enter your User Name and Password. Once you finish, click Done to continue. 8. For the Movie section, click the movie icon to play your movie from your USB flash drive. 9. For the Music section, click the music icon to play your music from your USB flash drive. D-Link DIR-860L User Manual 24
  • D-Link DIR-860L | User Manual - Page 30
    your files from your USB flash drive. 12. For the Folder section, click the folder icon to view your folders from your USB flash drive. D-Link DIR-860L User Manual 25
  • D-Link DIR-860L | User Manual - Page 31
    a web browser (e.g., Internet Explorer, Chrome, Firefox , or Safari) and enter http://dlinkrouter.local./ or http://192.168.0.1. Enter your password and click Login. Note: If you did not create a password with the Setup Wizard, leave the password blank by default. D-Link DIR-860L User Manual 26
  • D-Link DIR-860L | User Manual - Page 32
    user, click Manual Internet Connection Setup to configure your connection manually. (Instructions for manual setup begin below.) The next few pages will explain each of the ISP connection types. You can select the type from the My Internet Connection is drop-down menu. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 33
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 28
  • D-Link DIR-860L | User Manual - Page 34
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 29
  • D-Link DIR-860L | User Manual - Page 35
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 30
  • D-Link DIR-860L | User Manual - Page 36
    and then retype the password in the next box. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum Idle Enter a maximum idle time during which the Internet connection is Time: maintainedduringinactivity.Todisablethisfeature,enableAuto-reconnect. D-Link DIR-860L User Manual 31
  • D-Link DIR-860L | User Manual - Page 37
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 32
  • D-Link DIR-860L | User Manual - Page 38
    then retype the password in the next box. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. D-Link DIR-860L User Manual 33
  • D-Link DIR-860L | User Manual - Page 39
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DIR-860L User Manual 34
  • D-Link DIR-860L | User Manual - Page 40
    used here. B4 IPv4 Address: Enter the B4 IPv4 address value used here. (Optional.) WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will Default Gateway be displayed here. D-Link DIR-860L User Manual 35
  • D-Link DIR-860L | User Manual - Page 41
    the Quick Setup Wizard, you can click on Internet Connection Setup Wizard from the Setup > Internet screen. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. D-Link DIR-860L User Manual 36
  • D-Link DIR-860L | User Manual - Page 42
    click Next to continue. Select your Internet connection type. You can select DHCP Connection (Dynamic IP Address) if your Internet connection automatically provides you with an IP Address. This option is commonly used for cable modem services. Click Next to continue. D-Link DIR-860L User Manual 37
  • D-Link DIR-860L | User Manual - Page 43
    to your router. Click Next to continue. If you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. D-Link DIR-860L User Manual 38
  • D-Link DIR-860L | User Manual - Page 44
    Configuration If you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-860L User Manual 39
  • D-Link DIR-860L | User Manual - Page 45
    Section 3 - Configuration If you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. When the setup process is completed, you will see this screen. Click on Connect to save your settings. D-Link DIR-860L User Manual 40
  • D-Link DIR-860L | User Manual - Page 46
    page. Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 44. If you want to manually configure the wireless settings on your router click Manual Wireless Connection Setup and refer to page 46. D-Link DIR-860L User Manual 41
  • D-Link DIR-860L | User Manual - Page 47
    on Setup > Wireless Settings. Click the Wireless Connection Setup Wizard button. Enter a name for your wireless network (SSID), one for the 2.4GHz frequency and another for the 5GHz frequency. Do not use personal information as your SSID since users with wireless devices within range of your router
  • D-Link DIR-860L | User Manual - Page 48
    a passphrase for your Wireless Security Password. Click Next to continue. Note: The security password/passphrase must be between 8 and 63 characters and is case-sensitive. You will need to enter this passphrase on your wireless clients exactly or it will not connect. D-Link DIR-860L User Manual 43
  • D-Link DIR-860L | User Manual - Page 49
    Setup) and then click Next. Skip to the next page. If you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. Click Wireless Status to finish. This will take you to the Wireless Status screen. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 50
    a wireless client. Click Connect. Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. Click Wireless Status to finish. This will take you to Wireless Status screen. D-Link DIR-860L User Manual 45
  • D-Link DIR-860L | User Manual - Page 51
    is selected, the SSID of the DIR-860L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-860L in order to connect to it. Wireless Security: Refer to page 48 for more information regarding wireless security. D-Link DIR-860L User Manual 46
  • D-Link DIR-860L | User Manual - Page 52
    is selected, the SSID of the DIR-860L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-860L in order to connect to it. Wireless Security: Refer to page 48 for more information regarding wireless security. D-Link DIR-860L User Manual 47
  • D-Link DIR-860L | User Manual - Page 53
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-860L User Manual 48
  • D-Link DIR-860L | User Manual - Page 54
    must be between 8-63 characters. 7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DIR-860L User Manual 49
  • D-Link DIR-860L | User Manual - Page 55
    select TKIP and AES, TKIP, or AES. 5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default). 6. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. D-Link DIR-860L User Manual 50
  • D-Link DIR-860L | User Manual - Page 56
    Server Port, enter the port you are using with your RADIUS server. 1812 is the default port. 8. Next to RADIUS Server Shared Secret, enter the security key. 9. Click Advanced to enter settings for a secondary RADIUS Server. 10. Click Save Settings to save your settings. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 57
    .0. Host Name: Enter a name for the router. Local Domain Enter the Domain name (Optional). Name: Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-860L User Manual 52
  • D-Link DIR-860L | User Manual - Page 58
    the WAN side, disable to allow manual configuration. from WAN: NetBIOS Scope: This feature allows the configuration of a NetBIOS 'domain' name under which network hosts operates. This setting has no effect if the 'Learn NetBIOS information from WAN' is activated. D-Link DIR-860L User Manual 53
  • D-Link DIR-860L | User Manual - Page 59
    Section 3 - Configuration NetBIOS Node Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. Type: WINS IP Enter your WINS Server IP address(es). Address: D-Link DIR-860L User Manual 54
  • D-Link DIR-860L | User Manual - Page 60
    router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range port's MAC Address with the MAC address of your Ethernet card. Add/Update: Click Add/Update to save your entry. You must click Save Settings Link DIR-860L User Manual 55
  • D-Link DIR-860L | User Manual - Page 61
    a password for this account. Verify Password: Re-enter the password. Click Add/Edit to create the user. User List: Displays the accounts. The Admin and Guest accounts are built-in to the router. Number of Displays the USB device plugged into the router. Devices: D-Link DIR-860L User Manual 56
  • D-Link DIR-860L | User Manual - Page 62
    to connect. Also if you selected HTTPS, you must type in HTTPS:// instead of HTTP:// to get a secure connection. For example, if you selected HTTPS and changed the port to 3200, and your WAN IP address is 1.2.3.4, then you would enter HTTPS://1.2.3.4:3200 to connect. D-Link DIR-860L User Manual 57
  • D-Link DIR-860L | User Manual - Page 63
    music, pictures, and videos with any devices connected to your network. The iTunes Server allows iTunes software to automatically detect and play music from the router. Enable DLNA Click on this button to . USB 3.0: Click Disable if you want to disable the USB port. D-Link DIR-860L User Manual 58
  • D-Link DIR-860L | User Manual - Page 64
    a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. (Refer to page 66.) If you would like to manually configure the IPv6 local connectivity settings of your router, click on IPv6 Local Connnectivity Settings. D-Link DIR-860L User Manual 59
  • D-Link DIR-860L | User Manual - Page 65
    Section 3 - Configuration Click on Enable ULA. You can check Use default ULA prefix, or you can leave the box unchecked and enter the prefix manually in the ULA Prefix text box. Click Save Settings. D-Link DIR-860L User Manual 60
  • D-Link DIR-860L | User Manual - Page 66
    and return to the main page. The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-860L User Manual 61
  • D-Link DIR-860L | User Manual - Page 67
    Tunneling Connection (6rd). Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-860L User Manual 62
  • D-Link DIR-860L | User Manual - Page 68
    contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. D-Link DIR-860L User Manual 63
  • D-Link DIR-860L | User Manual - Page 69
    Address: LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router's LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-860L User Manual 64
  • D-Link DIR-860L | User Manual - Page 70
    used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to save your settings. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-860L User Manual 65
  • D-Link DIR-860L | User Manual - Page 71
    the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. Click Save Settings. D-Link DIR-860L User Manual 66
  • D-Link DIR-860L | User Manual - Page 72
    Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-860L User Manual 67
  • D-Link DIR-860L | User Manual - Page 73
    Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-860L User Manual 68
  • D-Link DIR-860L | User Manual - Page 74
    for optimal performance with your specific ISP. 1492 is the default MTU. IPv6 DNS Settings: Select either Obtain IPv6 DNS servers automatically or Use the following IPv6 DNS Servers Primary/Secondary DNS Enter the primary and secondary DNS server addresses. Servers: D-Link DIR-860L User Manual 69
  • D-Link DIR-860L | User Manual - Page 75
    IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. Router Advertisement Lifetime: Enter the Router Advertisement Lifetime (in minutes). Click Save Settings. D-Link DIR-860L User Manual 70
  • D-Link DIR-860L | User Manual - Page 76
    Address for the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-860L User Manual 71
  • D-Link DIR-860L | User Manual - Page 77
    Address for the DHCPv6 range for your local Start: computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local End: computers. Router Advertisemt Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-860L User Manual 72
  • D-Link DIR-860L | User Manual - Page 78
    Check to enable the Autoconfiguration feature. address assignment: Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: Click Save Settings. D-Link DIR-860L User Manual 73
  • D-Link DIR-860L | User Manual - Page 79
    Section 3 - Configuration Local Connectivity My IPv6 Connection Select Local Connectivity Only from the drop-down is: menu. LAN IPv6 Link-Local Displays the IPv6 address of the router. Address: Click Save Settings. D-Link DIR-860L User Manual 74
  • D-Link DIR-860L | User Manual - Page 80
    Section 3 - Configuration mydlink Settings The DIR-860L features a cloud service that pushes information such as firmware upgrade notifications, user activity, and intrusion alerts to the mydlink™ app on Android and Apple mobile devices. To insure that your router is up-to-date with the latest
  • D-Link DIR-860L | User Manual - Page 81
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-860L User Manual 76
  • D-Link DIR-860L | User Manual - Page 82
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DIR-860L User Manual 77
  • D-Link DIR-860L | User Manual - Page 83
    firewall port (TCP, UDP, or Both). Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 84
    prioritizing applications. By default the QoS Engine settings are disabled and The speed at which data can be transferred from the router to your ISP. This is determined by your ISP manually enter the Queue Weight for each individual Queue ID in the second column. D-Link DIR-860L User Manual 79
  • D-Link DIR-860L | User Manual - Page 85
    -side IP address falls within the range set here. Range: Application Port: Select a service or port you want to assign to this rule. Click on the Save Settings button to accept the changes made or click on the Don't Save Settings button to discard the changes made. D-Link DIR-860L User Manual 80
  • D-Link DIR-860L | User Manual - Page 86
    MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure MAC
  • D-Link DIR-860L | User Manual - Page 87
    based on time or dates, and/or block access from applications like P2P utilities or games. Enable Access Check the Enable Access Control box, and then Control: click on Add Policy to start the Wizard. Click Next to continue with the wizard. Access Control Wizard D-Link DIR-860L User Manual 82
  • D-Link DIR-860L | User Manual - Page 88
    Clone Your PC's MAC Address. Click Add and then click Next to continue. Select the filtering method. If you select the option to Block Some Access, check Apply Web Filter and/or Apply Advanced Port Filters. Click Next to continue. D-Link DIR-860L User Manual 83
  • D-Link DIR-860L | User Manual - Page 89
    . Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. Click Next. To enable Web Access Logging, click Enabled. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. D-Link DIR-860L User Manual 84
  • D-Link DIR-860L | User Manual - Page 90
    Access Control section (pages 82 - 83). Configure Select either DENY computers access to Website Filter: ONLY these sites or ALLOW computers access to ONLY these sites. Website URL/ Enter the keywords or URLs that you want Domain: to allow or block. Click Save Settings. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 91
    IP address. Add: Click the Add button to apply your settings. Inbound Filter This section will list any rules that are Rules List: created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DIR-860L User Manual 86
  • D-Link DIR-860L | User Manual - Page 92
    you want to have unrestricted Internet communication. If this computer obtains it's IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network Settings page so that the IP address of the DMZ machine does not change. D-Link DIR-860L User Manual 87
  • D-Link DIR-860L | User Manual - Page 93
    . IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG
  • D-Link DIR-860L | User Manual - Page 94
    1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-860L User Manual 89
  • D-Link DIR-860L | User Manual - Page 95
    : Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless network's channel over-lapping and causing interference, the router will automatically change to 20MHz. D-Link DIR-860L User Manual 90
  • D-Link DIR-860L | User Manual - Page 96
    PIN: Shows the current PIN. Reset PIN to Click to restore the default PIN of the router. Default: Generate New PIN: Create a random number that is a valid PIN. This becomes the router's PIN. You can then copy this PIN to the user interface of the wireless client. D-Link DIR-860L User Manual 91
  • D-Link DIR-860L | User Manual - Page 97
    page 44. Wireless Device: WPS Button You can also simply press the WPS button on the back of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 116 for more information. WPS Button D-Link DIR-860L User Manual 92
  • D-Link DIR-860L | User Manual - Page 98
    (recommended). Enable IPV4 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv4). Enable IPV6 Check the box to allow multicast traffic to pass through Multicast Streams: the router from the Internet (IPv6). D-Link DIR-860L User Manual 93
  • D-Link DIR-860L | User Manual - Page 99
    the Tools > Schedules section or click New Schedule. Wireless Enter a wireless network name (SSID) that is different Network Name: from your main wireless network. Security Mode: Select the type of security or encryption you would like to enable for the guest zone. D-Link DIR-860L User Manual 94
  • D-Link DIR-860L | User Manual - Page 100
    addresses of the firewall rule. Protocol: Select the protocol of the firewall port (All, TCP, UDP, or ICMP). Port Range: Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-860L User Manual 95
  • D-Link DIR-860L | User Manual - Page 101
    name to identify this route. Destination IP/ This is the IP address of the router used to reach the Prefix Length: specified destination or enter the IPv6 address prefix length out of the Router. Gateway: Enter the next hop that will be taken if this route is used. D-Link DIR-860L User Manual 96
  • D-Link DIR-860L | User Manual - Page 102
    remotely. Remote Admin This section will list any rules that are created. You may click the Edit icon to Inbound Filter: change the settings or enable/disable the rule, or click the Delete icon to remove the rule. Details will display the current remote admin filter. D-Link DIR-860L User Manual 97
  • D-Link DIR-860L | User Manual - Page 103
    input the time, enter the values in these Date Manually: fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click Sync. Your Computer's Time Settings to synch the date and time with the computer you are currently on. D-Link DIR-860L User Manual 98
  • D-Link DIR-860L | User Manual - Page 104
    the router logs to a SysLog SysLog Server: Server. SysLog Server IP The address of the SysLog server that will be Address: used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-860L User Manual 99
  • D-Link DIR-860L | User Manual - Page 105
    Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Enable Email When this option is enabled, router to Tools > Schedules. Detail: Detail will display selected schedule. D-Link DIR-860L User Manual 100
  • D-Link DIR-860L | User Manual - Page 106
    including any rules that you have created. If you want to save the current router configuration settings, use the Save Configuration button above. Reboot the Click to reboot the router. Device: Clear Language Click Clear to remove any installed language packs. Pack: D-Link DIR-860L User Manual 101
  • D-Link DIR-860L | User Manual - Page 107
    File to locate the language pack file on your hard drive. Click Upload to complete the language pack upgrade. Upload: Once you have a language pack update on your computer, use this option to browse for the file and then upload the information into the access point. D-Link DIR-860L User Manual 102
  • D-Link DIR-860L | User Manual - Page 108
    registered with your DDNS service provider. Username or Enter the Username or key for your DDNS Key: account. Password or Enter the Password or key for your DDNS account. Key: Timeout: Enter a timeout time (in hours). Status: Displays the current connection status. D-Link DIR-860L User Manual 103
  • D-Link DIR-860L | User Manual - Page 109
    /server from the drop-down list. Host Name: Enter the IPv6 Host Name that you registered with your DDNS service provider. Click Save. IPv6 DDNS Once you save your entry, the IPv6 DDNS host List: information will be entry or click the delete icon to remove the entry. D-Link DIR-860L User Manual 104
  • D-Link DIR-860L | User Manual - Page 110
    Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. IPv6 Ping Test: Enter the IPv6 address that you wish to Ping and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-860L User Manual 105
  • D-Link DIR-860L | User Manual - Page 111
    with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a 8pm. Name: Enter a name for your new schedule. Days: Select a day, a range of days, or All Week to include every day of the week. Time: Check All Link DIR-860L User Manual 106
  • D-Link DIR-860L | User Manual - Page 112
    wireless settings such as SSID and Channel. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Displays IPv4 and IPv6 multicast group addresses. Memberships: D-Link DIR-860L
  • D-Link DIR-860L | User Manual - Page 113
    want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your the log contents. Link to Email Clicking on this will take you to the Tools > Email Log Settings: Settings page. D-Link DIR-860L User Manual 108
  • D-Link DIR-860L | User Manual - Page 114
    3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-860L on both the WAN, LAN ports and the wireless segments. The traffic counter will reset if the device is rebooted. D-Link DIR-860L User Manual 109
  • D-Link DIR-860L | User Manual - Page 115
    Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-860L User Manual 110
  • D-Link DIR-860L | User Manual - Page 116
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection rate and MAC address of the connected wireless clients. D-Link DIR-860L User Manual 111
  • D-Link DIR-860L | User Manual - Page 117
    Section 3 - Configuration This page will display your current routing table. Routing D-Link DIR-860L User Manual 112
  • D-Link DIR-860L | User Manual - Page 118
    Section 3 - Configuration IPv6 The IPv6 page displays a summary of the Router's IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-860L User Manual 113
  • D-Link DIR-860L | User Manual - Page 119
    Section 3 - Configuration IPV6 Routing This page displays the IPV6 routing details configured for your router. D-Link DIR-860L User Manual 114
  • D-Link DIR-860L | User Manual - Page 120
    Section 3 - Configuration Support D-Link DIR-860L User Manual 115
  • D-Link DIR-860L | User Manual - Page 121
    Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-860L router. Please refer to your user manual for the wireless device
  • D-Link DIR-860L | User Manual - Page 122
    -right corner next to the time). 2. A list of available wireless networks will appear. 3. Click the wireless network (SSID) you want to connect to and then click Connect. 4. If the network is secure/encrypted, enter the Wi-Fi password (security key) and click Next. D-Link DIR-860L User Manual 117
  • D-Link DIR-860L | User Manual - Page 123
    be connected to your wireless network. If you get a good signal but cannot access the Internet, confirm the encryption by reviewing the profile or check the TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-860L User
  • D-Link DIR-860L | User Manual - Page 124
    to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 125
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-860L User Manual 120
  • D-Link DIR-860L | User Manual - Page 126
    also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 127
    4 - Security WPS The WPS feature of the DIR-860L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-860L User Manual 122
  • D-Link DIR-860L | User Manual - Page 128
    Section 4 - Security 3. Double-click the DIR-860L. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-860L User Manual 123
  • D-Link DIR-860L | User Manual - Page 129
    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-860L User Manual 124
  • D-Link DIR-860L | User Manual - Page 130
    The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-860L User Manual 125
  • D-Link DIR-860L | User Manual - Page 131
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-860L User Manual 126
  • D-Link DIR-860L | User Manual - Page 132
    . 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-860L User Manual 127
  • D-Link DIR-860L | User Manual - Page 133
    that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-860L User Manual 128
  • D-Link DIR-860L | User Manual - Page 134
    choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-860L User Manual 129
  • D-Link DIR-860L | User Manual - Page 135
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-860L User Manual 130
  • D-Link DIR-860L | User Manual - Page 136
    the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-860L User Manual 131
  • D-Link DIR-860L | User Manual - Page 137
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-860L User Manual 132
  • D-Link DIR-860L | User Manual - Page 138
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-860L User Manual 133
  • D-Link DIR-860L | User Manual - Page 139
    the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. To re-configure the router, refer to page 13. D-Link DIR-860L User Manual Reset Router/Forgot Password
  • D-Link DIR-860L | User Manual - Page 140
    Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you'll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-860L User Manual 135
  • D-Link DIR-860L | User Manual - Page 141
    Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-860L User Manual 136
  • D-Link DIR-860L | User Manual - Page 142
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DIR-860L User Manual 137
  • D-Link DIR-860L | User Manual - Page 143
    point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 144
    house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-860L User Manual 139
  • D-Link DIR-860L | User Manual - Page 145
    Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/ access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DIR-860L User Manual 140
  • D-Link DIR-860L | User Manual - Page 146
    an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 147
    IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-860L User Manual 142
  • D-Link DIR-860L | User Manual - Page 148
    . • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 149
    • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-860L User Manual 144
  • D-Link DIR-860L | User Manual - Page 150
    network. • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-860L User Manual 145
  • D-Link DIR-860L | User Manual - Page 151
    factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country's regulation. D-Link DIR-860L User Manual 146
  • D-Link DIR-860L | User Manual - Page 152
    ~ 2.483GHz ISM Band Operating Temperature • 30º to 104º F (0º to 40º C) Media Access Protocol • CSMA/CA with ACK Operating Humidity • 10% to 90% non-condensing 802.11a Radio affect wireless signal range. 2 Frequency Range varies depending on country's regulation. D-Link DIR-860L User Manual 147
  • D-Link DIR-860L | User Manual - Page 153
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-860L User Manual 148
  • D-Link DIR-860L | User Manual - Page 154
    of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code verbatim copies of this license document, but changing it is not allowed. D-Link DIR-860L User Manual 149
  • D-Link DIR-860L | User Manual - Page 155
    we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to Link DIR-860L User Manual 150
  • D-Link DIR-860L | User Manual - Page 156
    under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code that is widely used among developers working in that language. D-Link DIR-860L User Manual 151
  • D-Link DIR-860L | User Manual - Page 157
    (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or . Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-860L User Manual 152
  • D-Link DIR-860L | User Manual - Page 158
    price or no price for each copy that you convey, and you may offer support user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 159
    years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code , for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the . D-Link DIR-860L User Manual 154
  • D-Link DIR-860L | User Manual - Page 160
    mode of use of the product. "Installation Information" for a User support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access no special password or key Link DIR-860L User Manual 155
  • D-Link DIR-860L | User Manual - Page 161
    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f ) Requiring indemnification of licensors and authors of that material by anyone who or stated as exceptions; the above requirements apply either way. D-Link DIR-860L User Manual 156
  • D-Link DIR-860L | User Manual - Page 162
    compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or if the predecessor has it or can get it with reasonable efforts. D-Link DIR-860L User Manual 157
  • D-Link DIR-860L | User Manual - Page 163
    all patent claims owned or controlled by the contributor, whether a publicly available network server or other readily accessible means, then you must either (1) cause the are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey Link DIR-860L User Manual 158
  • D-Link DIR-860L | User Manual - Page 164
    from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If Link DIR-860L User Manual 159
  • D-Link DIR-860L | User Manual - Page 165
    to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-860L User Manual 160
  • D-Link DIR-860L | User Manual - Page 166
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-860L User Manual 161
  • D-Link DIR-860L | User Manual - Page 167
    to D-Link's then current functional specifications for the Software, as set forth in price paid that is attributable to the Software. Except as otherwise agreed by D-Link return the product to the original purchase point based on its return policy. In case dlink.com/. D-Link DIR-860L User Manual 162
  • D-Link DIR-860L | User Manual - Page 168
    damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-860L User Manual 163
  • D-Link DIR-860L | User Manual - Page 169
    BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-860L User Manual 164
  • D-Link DIR-860L | User Manual - Page 170
    D-LINK'S PRODUCT IS CONNECTED WITH, Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 171
    tested instructions Connect the equipment into an outlet on a circuit different from that to which the receiver is connected frequency range, then firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-860L User Manual
  • D-Link DIR-860L | User Manual - Page 172
    set forth for an uncontrolled environment. End users must follow the specific operating instructions for limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In addition, users should also be périphérique. D-Link DIR-860L User Manual 167
  • D-Link DIR-860L | User Manual - Page 173
    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 April 19, 2013 D-Link DIR-860L User Manual 168
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
User Manual
Version 1.0
|
April 19, 2013
DIR-860L
Wireless AC1200
Dual Band Gigabit Cloud Router