D-Link DKVM-CB User Manual

D-Link DKVM-CB Manual

Get D-Link DKVM-CB PDF manuals and user guides View all D-Link DKVM-CB manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DKVM-CB manual content summary:

  • D-Link DKVM-CB | User Manual - Page 1
    DKVM-2/4 2/4-Port Keyboard, Video, and Mouse Switch User's Manual Rev. 1.2
  • D-Link DKVM-CB | User Manual - Page 2
    Contents Introduction 1 Product Features 2 Package Contents 2 Hardware Installation 3 Front Panel Layout 3 Rear Panel Layout 3 Using the DKVM-2/4 9 "Select" button 9 Keyboard "Hot Key" commands 10 Optional cable 11 Troubleshooting 12 Keyboard 12 Mouse 13 Video 14 Specifications 16 II
  • D-Link DKVM-CB | User Manual - Page 3
    DKVM-2/4 KVM Switch. This product will ensure easy and accurate control over 2 or 4 PCs through a single console. The DKVM support is also provided for the Microsoft Intellimouse and Microsoft Intellimouse Explorer. The DKVM-2/4 supports high resolutions. Resolutions up to 1920 x 1440 are supported
  • D-Link DKVM-CB | User Manual - Page 4
    user to control 2/4 computers from one console. Works with DOS, Windows commonly available cables. Molded KVM cables are recommended. Model No. DKVM-CB Supports Monitor resolutions of up to 1920 x 1440. Supports VGA, SVGA this User's Guide, please check that you have the following contents of this
  • D-Link DKVM-CB | User Manual - Page 5
    how to connect the console and the computers to the D-Link KVM switch unit. First the layout of front and rear panel will be shown. FRONT PANEL LAYOUT REAR PANEL LAYOUT Before you start connecting your computers and console devices to the DKVM-2/4, please make sure that everything is powered off. 3
  • D-Link DKVM-CB | User Manual - Page 6
    size makes it easy to place on the desktop. Do take the length of the cables in consideration when placing the KVM switch unit. Step 2. We will now connect the console devices. Connect your monitor to the DKVM-2/4. The 15-pin connector coming from your monitor must be inserted into the unit on
  • D-Link DKVM-CB | User Manual - Page 7
    and PS/2 mouse to the front panel of the DKVM-2/4. The connections should be made to the two 6-pin Mini DIN connectors labeled =CONSOLE= as shown below. Step 4. Now the PC connections will be made with the monitor (VGA) connections. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side
  • D-Link DKVM-CB | User Manual - Page 8
    to the connector with the mouse symbol on the rear panel of the DKVM-2/4 unit. Repeat this for all PCs. Step 6. To finish the hardware installation, connect the PS/2 keyboard cables from your computers to the DKVM-2/4 unit. Connect a keyboard cable (6-pin Mini DIN Male / Male) to the PC and to the
  • D-Link DKVM-CB | User Manual - Page 9
    Step 7. Now make sure to verify all cables. In particular, keyboard and mouse cables should be checked because they are easily switched and they use the same type of connector. Step 8. Attach the power supply to the DKVM-2/4 unit and plug it into a power outlet. You will see the LED for Port 1 light
  • D-Link DKVM-CB | User Manual - Page 10
    functionality in the same way. If you find errors, recheck all cables for proper connections before going to the troubleshooting section of this manual. Note: Please do not switch the PC port (i.e. Do not press the push button of KVM switch or run hot key) while the computers are under their boot
  • D-Link DKVM-CB | User Manual - Page 11
    the unit, or make use of the keyboard "Hot key" commands. You may notice that the mouse cannot be used for around 2 seconds when the DKVM-2/4 switches to another computer. This is normal and is caused by synchronization that makes sure the mouse operates properly. "SELECT" BUTTON Pressing the Select
  • D-Link DKVM-CB | User Manual - Page 12
    KEY" COMMANDS To send "Hot Key" commands to the DKVM-2/4 unit, press the SCROLL LOCK Key twice within 2 seconds. You will be given a beep as confirmation. Now press a command key to give a "Hot Key" command. The following commands are supported: FIRST KEY SCROLL LOCK SECOND KEY THIRD KEY SCROLL
  • D-Link DKVM-CB | User Manual - Page 13
    is given just as the unit switches to the next computer. To exit Auto-Scan mode, press the SPACE BAR. The DKVM-2/4 will stop at the last computer shown. OPTIONAL CABLE Model No. DKVM-CB 6 feet (180cm) 3-in-one Cable kit is available for DKVM-2/4 KVM switch.Visit www.dlinkshop.com for details. 11
  • D-Link DKVM-CB | User Manual - Page 14
    Troubleshooting KEYBOARD My keyboard is not detected, or a keyboard error is given during boot-up. What can be the cause? Please verify that the keyboard cables are inserted properly. The computers all boot up properly, but the keyboard is not functional. What can be the cause? One of the following
  • D-Link DKVM-CB | User Manual - Page 15
    One of the following may be the case: Please verify that all mouse cables are inserted properly. Check especially for a mix-up with the PS/2 keyboard cable What can be the cause? One of the following may be the case: Please verify that the mouse is plugged into the DKVM-2/4 unit properly. Make sure
  • D-Link DKVM-CB | User Manual - Page 16
    sure you use generic PS/2 mouse drivers. A non-standard PS/2 mouse may have extensions on the PS/2 protocol that are not supported by the DKVM-2/4 unit. Do not move the mouse or press any mouse buttons while switching from one system to the other. Try resetting the mouse by unplugging it from the
  • D-Link DKVM-CB | User Manual - Page 17
    rate is too high. Try a lower refresh rate, or try lowering the resolution. Your video cable may be too long. Video signals are high frequency signals and are therefore subject to interference. Please use video cables that are as short as possible. Make sure that the power adapter is plugged in at
  • D-Link DKVM-CB | User Manual - Page 18
    Width: 119mm Height: 46mm Depth: 105mm Weight: 478g DKVM-4 Width: 185mm Height: 46mm Depth: 105mm Weight: 684g Operation and Storage parameters: Operating Temperature: Storage Temperature: Humidity: 0~40 Degrees C (32 to 104 Degrees F) -20~60
  • D-Link DKVM-CB | User Manual - Page 19
    -900900 (New Zealand) E-MAIL: [email protected], [email protected] URL: www.dlink.com.au D-LINK BENELUX Fellenoord 130, 5611 ZB Eindhoven 91-22-652-6696 FAX: 91-22-652-8914 E-MAIL: [email protected] URL: www.dlink-india.com D-LINK ITALIA Via Nino Bonnet No. 6/b, 20154 Milano, Italy TEL:
  • D-Link DKVM-CB | User Manual - Page 20
    Power Supplies and Fans One (1) Year Spare parts and spare kits Ninety (90) days D-Link's sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The
  • D-Link DKVM-CB | User Manual - Page 21
    (90) days after the product is purchased and/or licensed. The addresses/telephone/fax list of the nearest Authorized D-Link Service Office is provided in the back of this manual. FAILURE TO PROPERLY COMPLETE AND TIMELY RETURN THE REGISTRATION CARD MAY AFFECT THE WARRANTY FOR THIS PRODUCT. Submitting
  • D-Link DKVM-CB | User Manual - Page 22
    obtain a Return Material Authorization (RMA) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in
  • D-Link DKVM-CB | User Manual - Page 23
    CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE
  • D-Link DKVM-CB | User Manual - Page 24
    transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United and used in accordance with the instructions, may cause harmful interference to encouraged to try to correct the interference by one or more of the following measures: -Reorient
  • D-Link DKVM-CB | User Manual - Page 25
    CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures Warnung! Dies ist in Produkt der Klasse B. Im Wohnbereich kann dieses Produkt Funkstoerungen verursachen. In diesem Fall
  • D-Link DKVM-CB | User Manual - Page 26
    Reseller's full address Answers to the following questions help us to support your product: 1. Where and how will the product primarily be DECnet Others 4. What network operating system(s) does your organization use ? D-Link LANsmart Novell NetWare NetWare Lite SCO Unix/Xenix PC NFS 3Com 3+Open
  • D-Link DKVM-CB | User Manual - Page 27
  • D-Link DKVM-CB | User Manual - Page 28
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
DKVM-2/4
2/4-Port Keyboard, Video,
and Mouse Switch
User’s Manual
Rev. 1.2