D-Link DMC-1002 User Manual

D-Link DMC-1002 Manual

Get D-Link DMC-1002 PDF manuals and user guides View all D-Link DMC-1002 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DMC-1002 manual content summary:

  • D-Link DMC-1002 | User Manual - Page 1
    DMC-1002 SNMP Module for Chassis-Based Media Converter Manual Rev. 01 (JUN. 2002) 1907MCB10016000 RECYCLABLE
  • D-Link DMC-1002 | User Manual - Page 2
    3 INSTALLING THE MANAGEMENT MODULE 3 CONFIGURE THROUGH WEB BROWSER 4 CONFIGURATION VIA SERIAL PORT 4 SUPPORT SNMP MANAGEMENT 5 LED INDICATORS 5 MANAGEMENT SETTING THROUGH WEB BROWSER 6 MANAGEMENT SETTING THROUGH TERMINAL EMULATOR 13 WHEN FORGOT THE PASSWORD 19 TECHNICAL SPECIFICATIONS 20 1
  • D-Link DMC-1002 | User Manual - Page 3
    ABOUT THIS GUIDE This manual shows you how to configuring your DMC-1002 SNMP Module for Chassis-Based Media Status Indication of Modules: Unit Power; Link/Activity; Transmit; Receive LED Indication: Power/Power Fail/Fan Fail/MGM/Console/Link/ACT Support Hot-swappable Auto-negotiation for half-duplex
  • D-Link DMC-1002 | User Manual - Page 4
    about network devices, device configuration, network management, and Internet browsers. The user is assumed to be a network administrator or manager with an understanding of network 1) Connect the module to the network. Boot up for SNMP management on Web browser or emulation terminal program. 3
  • D-Link DMC-1002 | User Manual - Page 5
    browser (IE explorer, Netscape Communications, etc.) to open up the chassis monitoring system. The default IP Address for the chassis system is "192.168.1.1", and the default Login name and password is both "root". Configuration via Serial Port The Media Converter chassis system can be accessible
  • D-Link DMC-1002 | User Manual - Page 6
    5. The default Login name and password is both "root". Support SNMP Management The Media Converter Management Module support SNMP management. LED Indicators The LED indicators of the Switch include Power, ALERT, HTTP, ICQ, SMTP, SPEED, LINK/ACT and FDX/COL. The following shows the LED indicators for
  • D-Link DMC-1002 | User Manual - Page 7
    Lights green when link to networking Ethernet and blinks green for activity. MANAGEMENT SETTING THROUGH WEB BROWSER 1 Main Menu 1-1 System Function Figure (1) Main Menu There are four items in System Function menu, "Software Reboot, Factory Reset, Image Update and Configuration Update. (Figure
  • D-Link DMC-1002 | User Manual - Page 8
    1-1-1 Software Reboot To reboot for the software setting. 1-1-2 CPU Factory Reset This function is to set the CPU (DMC-1002) back to the default setting in case of the messy setting. 1-1-3 Factory Reset This function is to set both CPU (DMC-1002) and all system (all smart device installed in chassis
  • D-Link DMC-1002 | User Manual - Page 9
    While the file is uploading to the system, it will appear a warning sign. (Figure 3.2) Figure (3.1) Figure (3.2) 8
  • D-Link DMC-1002 | User Manual - Page 10
    1-1-5 Configuration Update Figure (4) The section is explaining how to upload and download the configure setting of the module. The Configuration Upload is to restore a setting file to the management module. The Configuration Download is to backup the setting from the management module. 1-2-1
  • D-Link DMC-1002 | User Manual - Page 11
    the hardware. BIOS revision: noted the version of the BIOS. Firmware revision: noted the version of the firmware. Change Password: the changing of the admit password. Confirm Password: to confirm the setting of admit password. System Name: to authorize the device system name. Location: to
  • D-Link DMC-1002 | User Manual - Page 12
    , need to press the save button to save the setting. 1-2-3 SNMP Configuration Figure (7) Get Community Name: to get the device community name (default = public). Set Community Name: to set the device community name (default = private). Trap Community Name: to authorize the device trap community
  • D-Link DMC-1002 | User Manual - Page 13
    set the warning trap when the community name of the device and workstation are different (default = enable). Power Fail Trap: to set the Power Fail Trap (default = enable). Fan Fail Trap: to set the fan fail trap (default = enable). MC Plug-in Trap: to set the trap of the Media Converter module
  • D-Link DMC-1002 | User Manual - Page 14
    MANAGEMENT SETTING THROUGH TERMINAL E M U L AT O R 2 Main Menu Figure (8) 2-1 System Function There are three items in System Function menu, "Software Reboot, Factory Reset, Image Update. (Figure 9) Figure (9) 2-1-1 Software Reboot To reboot for the software setting. 2-1-2 Factory Reset 13
  • D-Link DMC-1002 | User Manual - Page 15
    (10) The section is to set the TFTP Server IP Address first, and the default address was set to "192.168.1.2". The Image File can be updated by uploading the of the image file will write the whole firmware of the management module, please be sure that the image file is correct. 2-2 Configuration
  • D-Link DMC-1002 | User Manual - Page 16
    the hardware. BIOS revision: noted the version of the BIOS. Firmware revision: noted the version of the firmware. Change Password: the changing of the admit password. Confirm Password: to confirm the setting of admit password. System Name: to authorize the device system name. Location: to
  • D-Link DMC-1002 | User Manual - Page 17
    of the device. IP Address: to allocate an IP address for the device, the default IP is "192.168.1.1". Subnet Mask: to set the Subnet Mask, the default is "255.255.255.0". Default GW: to set the gateway address, the default is "192.168.1.254". NOTE: After configuring the system device, need to press
  • D-Link DMC-1002 | User Manual - Page 18
    the Power 1 or 2 is fail or not. Fan Fail: indicates if the Fan 1 or 2 is fail or not. 2-2-4 Media Converters Status Figure (15.1) Indicates the Link, Duplex mode and Speed status of each media 17
  • D-Link DMC-1002 | User Manual - Page 19
    converter. 2-2-4 Media Converters Status Figure (15.2) To control the linkage of each media converter. 2-3 SNMP Configuration Figure (16) Get Community Name: (default = public). to get the device community name Set Community Name: to set the device community name (default = private). 18
  • D-Link DMC-1002 | User Manual - Page 20
    Trap: to set the trap of the Media Converter module if it is pulled out (default = enable). Appendix A When forgot the password Boot up the chassis system and press the escape button repetitious three to four times, then usage will indicate out on the screen when the command key input error. 19
  • D-Link DMC-1002 | User Manual - Page 21
    and 2) Fan Fail (1 and 2) MGM (Green: CPU working; Blinking Amber: CPU Fail) Console (Blinking green: Data transfer; Blinking amber: Error Data) Physical and Environmental Temperature Humidity Dimensions EMI: Operating: 0° ~ 50° C, Storage: -10° ~ 70° C Operating: 10% ~ 90%, Storage: 5% ~ 90% 130
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Rev. 01 (JUN. 2002)
1907MCB10016000
RECYCLABLE
SNMP Module for
Chassis-Based Media Converter
Manual
DMC-1002