Dacor PF36 Installation Instruction - Millennia Handle Kit

INSTALLATION

INSTRUCTIONS

Millennia

®

Handle Kit,

PNs AFM36H3, ARFMH36H3

REFRIGERATOR MODELS: EF36BNF,

EF36BNNF, IF36BNNF, PF36BNDF and PF36BNNF

Part No. 102861 Rev. G

Parts Included

Millennia Style Handles

2 Large

AFM36H3 - PN 701210, ARFMH36H3 - PN 701210-01

AFM36H3 - PN 701209, ARFMH36H3 - PN 701209-01

1 Small

PN 103731

Millennia Handle

Mounting Studs* (6)

* Required for EF36 and IF36 series refrigerators only

Tools and Materials Required

The following items are not provided with the

kit and are required for proper installation.

•

3/32” Allen wrench (not supplied)

•

T20 Torx driver (PF36 series only)

•

Thin double sided tape (IF36 series only)

•

Fasteners for attaching the handle mounting studs (IF36 series only), size and

type varies with door panel configuration, see step 1 for further information

CAUTION:

To avoid damage to the refrigerator or handle

components, do not use power tools. Use hand tools

only for disassembly and assembly.

STEP 1

Model IF36BNNF only:

This kit does not include

the necessary handle stud mounting screws

because the required fastener length varies with

the total thickness of the custom panels. The panel

craftsman must determine and obtain the proper

stud mounting fasteners required for the

application prior to installing the panels on the

refrigerator.

NOTES:

See Dacor document 100504 for complete custom

panel construction information.

The handle mounting studs accommodate #10

flat head screws/bolts. Bolting the studs into place

on the panel is highly recommended for long term

stability.

If using bolts, the nut must be countersunk into the

panel (see diagram).

The inner edges of the two upper refrigerator doors

must be secured to the door using thin double

sided tape. See step 3 for additional details.

For EF36 series refrigerators, skip to step 5. For PF series refrigerators, skip to step 7.

Mounting the Stud Using a Wood Screw

Door

Stud

Thin double sided tape

Custom

door panel

assembly

Mounting the Stud Using a Nut and Bolt

(recommended)

Door

Stud

Thin double sided tape

Countersink nut

Custom

door panel

assembly