Dell 3110cn User Guide
Dell 3110cn Manual
 |
View all Dell 3110cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell 3110cn manual content summary:
- Dell 3110cn | User Guide - Page 1
Dell™ Color Laser Printer 3110cn User's Guide Notes, Notices, and Cautions Click the links to the left for information on the features, options, and operation of your printer. For information on other documentation included with your printer, see "Finding Information." - Dell 3110cn | User Guide - Page 2
switch 10 Control board 11 Control board cover To order replacement print cartridges or supplies from Dell: 1. Double-click the icon on your desktop. 2. Visit Dell's website, or order Dell printer supplies by phone. www.dell.com/supplies For best service, have your Dell printer Service Tag available - Dell 3110cn | User Guide - Page 3
. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks of Microsoft Corporation; Macintosh, MacOS, EtherTalk and - Dell 3110cn | User Guide - Page 4
in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Dell Inc., One Dell Way, Round Rock, Texas, 78682, USA. This equipment has been tested and found to comply with the limits for a Class B digital device - Dell 3110cn | User Guide - Page 5
: Read and follow all safety instructions in your Owner's Manual prior to setting up and operating your printer. Setup diagram Troubleshooting Guide Troubleshooting Guide: - User Settings - Configuration - Troubleshooting Instructions - Other Problems Express Service Code and Service Tag number - Dell 3110cn | User Guide - Page 6
Tag numbers are located inside the front door of your printer. · Latest drivers for my printer · Answers to technical service and support questions · Documentation for my printer Dell Support Website The Dell Support Website provides several online tools, including: · Solutions - Troubleshooting - Dell 3110cn | User Guide - Page 7
, or the key operator, an e-mail when the printer needs supplies or intervention. If you fill out printer inventory reports requiring the asset tag number of all of the printers in your area, use the Printer Information feature in the Dell Printer Configuration Web Tool . Just type the IP address of - Dell 3110cn | User Guide - Page 8
address shows 0.0.0.0 (the factory default), an IP address has not been assigned. To assign one for your printer, see "Assign an IP Address ." Use the Dell Printer Configuration Web Tool for: Printer Status Get immediate feedback on printer supply status. When print cartridge is running low, click - Dell 3110cn | User Guide - Page 9
Password Lock the operator panel with a password so that other users don't inadvertently change the printer Dell web page, and see the User's Guide on that page to verify configured settings. Order Supplies at: www.dell.com/supplies Contact Dell Support at: support.dell.com Using the Dell Printer - Dell 3110cn | User Guide - Page 10
When you have finished setting the language and proxy, type http://nnn.nnn.nnn.nnn/ (the printer's IP address) in the URL entry field of the browser to activate the Dell Printer Configuration Web Tool . For Netscape Communicator 7.1 Setting Up the Display Language 1. Select Preferences from Edit on - Dell 3110cn | User Guide - Page 11
When you select Manual proxy configuration , specify the printer's IP address in the No Proxy for: box. When you have finished setting the language and proxy, type http://nnn.nnn.nnn.nnn/ (the printer's IP address) in the URL entry field of the browser to activate the Dell Printer Configuration Web - Dell 3110cn | User Guide - Page 12
. Dell Color Displays the printer product name. Laser 3110cn IP Address: Displays the printer's IP address. Location: Displays the printer's Help Links to the Dell web page. See the User's Guide on that page. Printer Bitmap Shows the printer bitmap. The Printer Status menu appears in - Dell 3110cn | User Guide - Page 13
Password Links to the Other Features menu. Online Help Links to the Dell web page. See the User's Guide on that page. Order Supplies at: Links to the Dell web page. Contact Dell Support at: Links to the Dell support page. Web address: http://support.dell current printer configuration and updates - Dell 3110cn | User Guide - Page 14
the Dell Printer Configuration Web Tool . When you are accessing these menus, the authentication dialog appears on the screen. Type a user name and password for the printer's administrator by following the prompts displayed in the dialog box. The default user name is admin , and the default password - Dell 3110cn | User Guide - Page 15
"Non-Dell Toner " "Initialize PrintMeter " "Web Link Customization " "Print Server Settings " " Set Password " "Security " "IPsec "*2 "Reset Print Server " "Copy Printer Settings " "Copy Printer Settings " "Copy Printer Settings Report " "Print Volume " "Print Volume " "Dell ColorTrack - Dell 3110cn | User Guide - Page 16
when the optional multi protocol card is installed. *3 This item is only available when the optional wireless printer adapter is installed. *4 This item is only available with the printer using the postscript driver. *5 This item is only available when the optional 550-sheet feeder is installed - Dell 3110cn | User Guide - Page 17
Cyan Cartridge Level Magenta Cartridge Level Yellow Cartridge Level Black Cartridge Level Displays the percent of toner remaining in each print cartridge. When a cartridge is empty, a message appears. The text Print Cartridge is linked to the Dell Printer Supplies website. Consumables Status n% - Dell 3110cn | User Guide - Page 18
Service Tag Number Displays Dell's service tag number. Asset Tag Number Displays the printer's asset tag number. Printer Serial Number Displays the printer's serial number. Memory Capacity Displays the memory capacity. Processor Speed Displays the processing speed. Printer Revision Levels - Dell 3110cn | User Guide - Page 19
Settings Purpose: To display the current settings of the operator panel menus. Values: System Settings Power Saver Displays the amount of time before the printer enters the power Timer Mode 1 *1 saver timer mode 1 after it finishes a print job. Power Saver Displays the amount of time before the - Dell 3110cn | User Guide - Page 20
whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it duplexing as the default for all print jobs.This item is only available when the optional duplexer is installed. Font Displays the default font from the registered fonts in the printer - Dell 3110cn | User Guide - Page 21
whether to print in the draft mode. Line Termination Displays whether to set the line termination. Default Color Displays the color mode setting. PS Error Report Displays whether the printer outputs error contents for a PostScript error. PS Job Time-Out Displays the execution time for one - Dell 3110cn | User Guide - Page 22
Auto Registration Auto Adjustment Registration Adjustment Non-Dell Toner Non-Dell Toner Web Link Customization Select Reorder URL Regular . Displays whether to adjust the color registration automatically. Displays whether to use a refilled print cartridge. Displays the URL that Order - Dell 3110cn | User Guide - Page 23
Printer Settings , Copy Printer Settings , Dell ColorTrack , and Tray Settings menus on the Dell Printer Configuration Web Tool are discarded if they are made while the printer PS Fonts List Print Meter Color Test Page Click the Start button to print the printer settings page. Click the Start - Dell 3110cn | User Guide - Page 24
. Print ID Specifies a location where the user ID is printed. Print Text Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Banner Sheet Insert Position Specifies the position of banner sheet. Banner Sheet Specify Tray - Dell 3110cn | User Guide - Page 25
. Adobe Protocol Specifies PostScript communication protocol for each interface. Network Settings Purpose: To Specify the PostScript communication protocol for this printer. Values: Adobe Protocol Specifies PostScript communication protocol for each interface. USB Settings Purpose: To change - Dell 3110cn | User Guide - Page 26
job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not executed. Draft Mode Specifies whether to print in the draft mode. Line Termination Sets the line termination. Default Color Specifies the color mode - Dell 3110cn | User Guide - Page 27
left frame and set the password. Printer Maintenance The Printer Maintenance tab includes Paper Density , Adjust BTR , Adjust Fuser , Auto Registration Adjustment , Color Registration Adjustments , Adjust Altitude , Reset Defaults , Clear Storage , Non-Dell Toner , Initialize PrintMeter , and Web - Dell 3110cn | User Guide - Page 28
Plain Sets the reference voltage settings for the transfer roller for plain paper. Plain Thick Sets the reference voltage settings for the transfer roller for thick plain paper. Transparency Sets the reference voltage settings for the transfer roller for transparencies. Covers Sets the - Dell 3110cn | User Guide - Page 29
Purpose: To adjust the height of the installation location of the printer. Values: 0 meter Select the value close to the height of the installation location of the printer. 1000 meters 2000 meters 3000 meters Reset Defaults Purpose: To initialize the NV (non-volatile) memory. After executing - Dell 3110cn | User Guide - Page 30
factory print cartridge setting. Non-Dell-brand print cartridges may disable some printer features, reduce print quality and reduce the reliability of your printer. Dell recommends only new Dell-brand print cartridges for your printer. Dell does not provide warranty coverage for problems caused by - Dell 3110cn | User Guide - Page 31
.us.dell.com/sna Premier http://premier.dell.com Print Server Settings Use the Print Server Settings menu to set the type of printer interface and the duplex settings. Current Ethernet Settings Displays the current Ethernet settings. MAC Address Displays the printer's MAC address. Wireless - Dell 3110cn | User Guide - Page 32
Displays the IP address. Stateless Address 1-3 Displays the stateless addresses. Link Local Address Displays the link local address. Manual Gateway Address Displays the gateway address. Auto Configure Gateway Address Displays the gateway address. IPv4 Get DNS Server Displays whether - Dell 3110cn | User Guide - Page 33
period. Port Status Displays the port status. Printer URI Displays the printer URI. Connection Time-Out Displays the connection timeout connections received simultaneously by the client. Unicode Support Displays the status of the Unicode Support feature. Auto Master Mode Displays the status - Dell 3110cn | User Guide - Page 34
Time-Out AppleTalk * 3 Port Status Displays the status of the Encrypt Password feature. Displays the timeout period. Displays the connection timeout period. Displays the port status. Printer Displays the printer name used in AppleTalk. AppleTalk Zone Displays the AppleTalk zone name. AppleTalk - Dell 3110cn | User Guide - Page 35
Port Status Displays the port status. When NetWare is implemented, the status of IPX/SPX and TCP/IP is also displayed. Device Name Displays the printer name. Active Mode Displays the current mode for Active Mode. Tree Name Displays the tree name. Context Name Displays the context name of the - Dell 3110cn | User Guide - Page 36
E-Mail Alert for Service Calls. Print Server Settings The Print Server Settings tab includes Basic Information , Port Settings , Wireless LAN , TCP/IP , NetWare , SMB , AppleTalk , E-Mail Alert , Bonjour(mDNS) , and SNMP pages. Basic Information Purpose: To configure the printer's basic information - Dell 3110cn | User Guide - Page 37
. 100BASE-TX Selects 100Base-T Half-Duplex as the default value. Half-Duplex 100BASE-TX Selects 100Base-T Full-Duplex as the default value. Full-Duplex Current Ethernet Settings Displays the current settings of Ethernet. MAC Address Displays the printer's MAC address. Port Status LPD Port9100 - Dell 3110cn | User Guide - Page 38
transport protocol. IPX is only available when the multi protocol card is installed. *1 The Ethernet settings are not displayed when the optional wireless printer adapter is installed. *2 An optional multi protocol card is required to display the item. NOTE: The settings in the Port Settings page - Dell 3110cn | User Guide - Page 39
MAC Address Displays the MAC address of the printer's wireless network adapter. Link Channel Displays the channel number of the printer (Password) Manual IP Address Sets the IP address. Manual Subnet Sets the subnet mask. Mask Manual Gateway Address Sets the gateway address. IPv6 Use Manual - Dell 3110cn | User Guide - Page 40
or semicolon. IPv4 Get DNS Server Select the check box to get the DNS server address Address from automatically from the DHCP server. DHCP Manual DNS Sets the DNS server address. Server Address IPv6 Get DNS Server Select the check box to get the DNS server address Address from automatically - Dell 3110cn | User Guide - Page 41
from 10 to 20. HTTP Port Number Sets the port number to 80 or from 8000 to 9999. Simultaneous Connections Displays the maximum number of connections received simultaneously by the client. Connection Time-Out Sets the connection timeout period from 1 to 255 seconds. FTP Password Sets - Dell 3110cn | User Guide - Page 42
type. Current Frame Type Displays the current frame type. NetWare Network Address Device Name *1 Displays the IPX network address. Specifies the printer name up to 47 alphanumeric characters. For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting remains - Dell 3110cn | User Guide - Page 43
PServer Mode or Directory: PServer Mode is selected. Enter the password again. Displays the status of NetWare. Select the check box to the NetWare page will be valid only when NetWare or the printer is rebooted. Click the Restart printer to apply new settings button to apply new settings. NOTE: An - Dell 3110cn | User Guide - Page 44
valid if no input is made. The default password is password . Confirm Administrator Allows you to confirm the configured administrator password by re-entering the Password same password. Maximum Sessions Displays the maximum sessions. Unicode Support On Notifies the host name and workgroup - Dell 3110cn | User Guide - Page 45
AppleTalk Printer Specifies the printer name in the AppleTalk network up to 32 used. If specifying more than one address, separate them using commas. SMTP Login Password Specifies the SMTP account password up to 31 alphanumeric characters. POP3 Server Address* 1 Specifies the POP3 server address - Dell 3110cn | User Guide - Page 46
an E-Mail Alert for paper handling. Service Call Select the check box to receive an E-Mail Alert for Service Calls. * 1 Available when POP before original setting will remain valid if no input is made. Printer Name Specifies the printer name up to 63 alphanumeric characters and symbol sets. The - Dell 3110cn | User Guide - Page 47
value between 0 and ffff. Authenticate Error Trap Select the check box to notify Authenticate Error Trap. *1 The default value of each items can be changed by using Dell Printer Configuration Web Tool. *2 An optional multi protocol card is required to display the item. IP Filter (IPv4) Purpose - Dell 3110cn | User Guide - Page 48
From a Specified User The following describes the procedure to enable printing only from the "192.168.100.10 " IP address. Procedures: 1. Click the first column of Access List row 1 . 2. Enter "192.168.100.10 " in the Address field and "255.255.255.255 " in the Address Mask field. 3. Select Permit - Dell 3110cn | User Guide - Page 49
setup parameters from the Dell Printer Configuration Web Tool . Set the password of the operator panel from Panel Settings in the Printer Settings . This page can also be displayed by clicking Set Password in the Left Frame. NOTE: To restore the password to default (NULL), initialize the NVM memory - Dell 3110cn | User Guide - Page 50
Password Sets the password up to 10 alphanumeric characters. The password will appear as asterisks (*) in the field when it is entered. Confirm Administrator Enter the password again to confirm it. Password Security Purpose: To specify the settings for the SSL encryption communication to the printer - Dell 3110cn | User Guide - Page 51
items are copied. Printer settings are simultaneously copied to printers of up to 10 IP addresses. Copy Printer Settings Report Purpose: To verify the histories of copying after turning on the printer. Print Volume The Printer Volume menu includes the Print Volume and Dell ColorTrack pages. Print - Dell 3110cn | User Guide - Page 52
Page Count Paper Used Displays the total number of pages printed since the printer was shipped from the factory. Displays the number of pages for each paper size. Dell ColorTrack Purpose: To specify which users have access to color printing and to limit print volume per user. Values: Print User - Dell 3110cn | User Guide - Page 53
Tray 1 Paper Type Sets the type of paper loaded in the standard 250-sheet tray. Tray 1 Paper Size Sets the size of paper loaded in the standard 250-sheet tray. Tray 1 Custom Size - Y Sets the length of paper loaded in the standard 250-sheet tray. Tray 1 Custom Size - X Sets the width of paper - Dell 3110cn | User Guide - Page 54
About Your Printer The following illustrations show the standard Dell™ Color Laser Printer 3110cn, with an optional 550-sheet feeder and duplexer. - Dell 3110cn | User Guide - Page 55
options 1 Standard 250- 7 Optional 550-sheet feeder sheet tray NOTE: Your printer allows for a maximum of 3 trays (standard 250-sheet tray, optional 550-sheet feeder, and multipurpose feeder). 2 Multipurpose 8 Optional duplexer feeder 3 Side button 4 Belt unit 5 Operator panel 6 Front cover NOTE - Dell 3110cn | User Guide - Page 56
CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Owner's Manual. NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within 5 minutes. If the front cover remains open for more than 5 minutes - Dell 3110cn | User Guide - Page 57
3. Pull up the tag to remove the seal from the fuser. NOTE: Make sure to lock both levers at ends of the fuser, after removing the seal. 4. Hold one print cartridge firmly and shake it 5 or 6 times to distribute the toner evenly. 5. - Dell 3110cn | User Guide - Page 58
, do not remove the orange protective cover of the print cartridge before the cartridge is inserted into its slot in the printer. 6. Completely remove the seal from the print cartridge by pulling the tab on the end of the print cartridge. NOTE: Pull the seal out straight. Pulling the seal diagonally - Dell 3110cn | User Guide - Page 59
7. 8. Repeat steps 4, 5, 6, and 7 to install the other print cartridges. 9. Remove the orange protective covers of the each of the installed print cartridges. 10. After installing all of the print cartridges, close the front cover. - Dell 3110cn | User Guide - Page 60
- Dell 3110cn | User Guide - Page 61
Cable Connecting the Printer Locally Connecting the Printer to the Network Choosing the Right Cable Your Dell™ Color Laser Printer 3110cn interconnection cable must meet the following requirements: Connection type Connection specifications Parallel IEEE 1284 USB USB 2.0 Ethernet 10 Base-T/100 - Dell 3110cn | User Guide - Page 62
this step and go on to "Connecting the Printer to the Network." Microsoft® Windows® 2000, XP, Server 2003, XP x64, Server 2003 x64, Vista and Mac® OS X or later operating systems support USB connections. Some UNIX® and Linux computers also support USB connections. See your computer operating system - Dell 3110cn | User Guide - Page 63
A USB/parallel port requires a USB/parallel cable. Be sure to match the USB/parallel symbol on the cable to the USB/parallel symbol on the printer. Plug the other end of the cable into a USB or parallel port on the back of the computer. For a USB cable, do not plug it - Dell 3110cn | User Guide - Page 64
other attached devices are turned off and unplugged. 2. Connect the printer to the network using an Ethernet cable or the wireless printer adapter. To use a wireless printer adapter, you must install the Multi Protocol Card first. To install the card, see "Installing the Dell Multi Protocol Card". - Dell 3110cn | User Guide - Page 65
or hub. For a wireless connection, insert the wireless printer adapter into the wireless printer socket on the back of the printer. Turn On the Printer 1. Plug one end of the printer power cable into the socket at the back of the printer and the other end into a properly grounded outlet. CAUTION - Dell 3110cn | User Guide - Page 66
shows anything other than 0.0.0.0 (the factory default) or 169.254.xx.xx, the printer has an IP address assigned and stored. Go to "Verify the IP Settings." Assign an IP Address NOTE: When you assign an IP address manually in IPv6 Mode, use the Dell Printer Configuration Web Tool. To open the - Dell 3110cn | User Guide - Page 67
. 10. Press Dell Printer Configuration Web Tool displays in your browser. You can also assign the IP address to the printer when installing the printer drivers printer selection window. Verify the IP Settings 1. Print another printer settings page. 2. Look under the TCP/IP heading on the printer - Dell 3110cn | User Guide - Page 68
2. or Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type ping followed by the new printer IP address (for example, 192.168.0.11): ping 192.168.0.11 If the printer is active on the network, you will receive a reply. - Dell 3110cn | User Guide - Page 69
Enterprise Console Management Modules The following enterprise console management modules and user's manuals are available on your Drivers and Utilities CD: IBM Tivoli® NetView® CA Unicenter® HP OpenView® To use the modules, go to the following directory on your CD and run each . - Dell 3110cn | User Guide - Page 70
and 550-sheet feeder. Installing the Optional 550-Sheet Feeder Installing a Duplexer Installing a Memory Card Installing the Dell Multi Protocol Card Installing the Dell Wireless Printer Adapter 3310 USB Installing the Optional 550-Sheet Feeder CAUTION: If you are adding an optional 550-sheet - Dell 3110cn | User Guide - Page 71
onto the optional 550-sheet feeder. 4. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and remove it from the printer. 5. Join the 550-sheet feeder and the printer by tightening the two screws provided with the feeder with a coin or similar - Dell 3110cn | User Guide - Page 72
, and push until it stops. 7. Turn on the printer. NOTE: The printer will automatically detect the attached tray but will not detect the paper type. 8. Print a printer settings page to verify that the optional 550-sheet feeder is installed correctly. a. Press Menu. b. Press until Report/List appears - Dell 3110cn | User Guide - Page 73
then press Menu. 10. If you installed the optional 550-sheet feeder after installing the printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. When Using PCL Driver Windows Vista™ 1. Click Start - Dell 3110cn | User Guide - Page 74
Click Apply, and then click OK. 4. Close the Printers and Faxes (or Printers) dialog box. When Using PS Driver Windows Vista 1. Click Start Control Panel Hardware and Sound Printers. 2. Right-click the printer that is using the PS driver, and then select Properties from the displayed list. 3. Click - Dell 3110cn | User Guide - Page 75
5. Windows 2000/NT 4.0 1. Click Start Settings Printers. 2. Right-click the printer that is using the PS driver, and then select have been installed on the printer, and then click Apply Changes. Installing a Duplexer NOTICE: To protect the drums of the print cartridges against bright light, close - Dell 3110cn | User Guide - Page 76
4. Pull up on the belt release levers and rotate the belt unit up as shown in the illustration. 5. Remove the connector cap. - Dell 3110cn | User Guide - Page 77
NOTE: The connector cap in your printer may look different from illustration. 6. With the connector of the duplexer toward the slot, push the duplexer into the slot. - Dell 3110cn | User Guide - Page 78
NOTE: Make sure that the duplexer is correctly connected to the printer with connectors and cannot be moved easily. 7. Close the belt unit by pulling it down. 8. Close the front cover. - Dell 3110cn | User Guide - Page 79
. 11. If you installed the optional duplexer after installing the printer driver, update your driver by following the instructions for each operating system. If the printer is on a network, update the driver for each client. When Using PCL Driver Windows Vista 1. Click Start Control Panel Hardware - Dell 3110cn | User Guide - Page 80
Select Available for the duplexer setting. 3. Click Apply, and then click OK. 4. Close the Printers and Faxes (or Printers) dialog box. When Using PS Driver Windows Vista 1. Click Start Control Panel Hardware and Sound Printers. 2. Right-click the printer that is using the PS driver, and then select - Dell 3110cn | User Guide - Page 81
and then select Available for the Duplexer item under Installable Options. 4. Click Apply, and then click OK. 5. Close the Printers and Faxes dialog box. Windows 2000/NT 4.0 1. Click Start Settings Printers. 2. Right-click the printer that is using the PS driver, and then select Properties from the - Dell 3110cn | User Guide - Page 82
3. With the connector of the memory card toward the slot, insert the memory card at an angle into the slot. 4. Push the memory card into the slot firmly. - Dell 3110cn | User Guide - Page 83
5. Pivot the memory card downward until it clicks into place. NOTE: Make sure that the memory card is firmly fixed in the slot and cannot be moved easily. 6. Close the control board cover and turn the screw clockwise. - Dell 3110cn | User Guide - Page 84
the additional print memory after installing the printer driver, update your driver by following the instructions for the operating system you are using. If the printer is on a network, update the driver for each client. When Using PCL Driver Windows Vista 1. Click Start Control Panel Hardware and - Dell 3110cn | User Guide - Page 85
Click Apply, and then click OK. 4. Close the Printers and Faxes (or Printers) dialog box. When Using PS Driver Windows Vista 1. Click Start Control Panel Hardware and Sound Printers. 2. Right-click the printer that is using the PS driver, and then select Properties from the displayed list. 3. Click - Dell 3110cn | User Guide - Page 86
under Installable Options. 4. Click Apply, and then click OK. 5. Close the Printers and Faxes dialog box. Windows 2000/NT 4.0 1. Click Start Settings Printers. 2. Right-click the printer that is using the PS driver, and then select Properties from the displayed list. 3. Click the Device Settings - Dell 3110cn | User Guide - Page 87
2003 x64/2000/ NT 4.0 IPX/SPX NetWare3.12/3.2/4.1/4.11/4.2/5/6/6.5* AppleTalk Mac OS X 10.2.8/10.3.9/10.4.3 Bonjour Mac OS X 10.2.8/10.3.9/10.4.3 IPv6 Windows Vista *Only compatible with Support Pack 1.1 or later. 1. Make sure that the printer is turned off and unplug all cables including the - Dell 3110cn | User Guide - Page 88
4. Press the printed circles with your fingers to secure the multi protocol card to the connector. NOTE: Avoid pressing down on the multi protocol card's connector. NOTE: Make sure that the multi protocol card is firmly fixed in the connector and cannot be moved easily. 5. Insert the two screws - Dell 3110cn | User Guide - Page 89
. Press . The printer settings page is printed. d. Verify Multi-Protocol Card is listed in the printer settings under Printer Options. If it is not listed, turn off the printer, unplug the power cable, and reinstall the optional multi protocol card. Installing the Dell Wireless Printer Adapter 3310 - Dell 3110cn | User Guide - Page 90
(104-bit key) WEP Encryption/WPA/WPA2 NOTE: To use the wireless printer adapter, you must install the multi protocol card first. To install the card, see "Installing the Dell Multi Protocol Card". 1. Make sure that the printer is turned off and unplug all cables including the power cord from the - Dell 3110cn | User Guide - Page 91
Adapter attached must be installed on the printer. Scene 1. Install a printer to the already-operating wireless network (When wireless setting is already set to your computer) 1. Insert the Drivers and Utilities CD into your computer. 2. The Drivers and Utilities CD should launch the installation - Dell 3110cn | User Guide - Page 92
D is the drive NOTE: For Windows Vista, click Continue when the User 10. On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the printer printer on server check box on the Select Printer screen and also select the PostScript Driver check box on the Enter Printer - Dell 3110cn | User Guide - Page 93
, the wireless setting specified on the Enter Wireless Network Settings screen is sent to the printer. 10. On the Wireless configuration is now complete screen, create the wireless setting sent to the printer on your computer following the steps below, and then click Next. NOTE: If your computer - Dell 3110cn | User Guide - Page 94
by clicking the Print Test Page button. Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your desk. You can view and/or change the printer configuration settings, monitor toner level, and when it is time to order replacement consumables - Dell 3110cn | User Guide - Page 95
the Wireless Networks tab. d. Make sure the check box for Use Windows to configure my wireless network settings is checked. NOTE: Be sure specified on the Enter Wireless Network Settings screen is sent to the printer. 10. On the Wireless configuration is now complete screen, change the wireless - Dell 3110cn | User Guide - Page 96
is set, and then click Install. 12. If you select the I am setting up this printer on server check box on the Select Printer screen and also select the PostScript Driver check box on the Enter Printer Settings screen, the Adobe Systems Inc. License Agreement screen appears. Select the I accept the - Dell 3110cn | User Guide - Page 97
following the steps shown on the Enable Communication with Printer screen, and then click Next. The steps are by the operating system. See the instructions below. a. Select Network Connections from . d. Make sure the check box for Use Windows to configure my wireless network settings is checked. - Dell 3110cn | User Guide - Page 98
is set, and then click Install. 12. If you select the I am setting up this printer on server check box on the Select Printer screen and also select the PostScript Driver check box on the Enter Printer Settings screen, the Adobe Systems Inc. License Agreement screen appears. Select the I accept the - Dell 3110cn | User Guide - Page 99
printer configuration settings, monitor toner level, and when it is time to order replacement consumables, just click the Dell supplies link right from your Web browser. NOTE: The Dell Printer Configuration Web Tool is not available when the printer instructions below for Use Windows to configure my - Dell 3110cn | User Guide - Page 100
Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. 2. Check the IP address assigned by AutoIP on the printer wireless setting of the printer on Dell Printer Configuration Web Tool. 6. Reboot the printer. 7. Restore the - Dell 3110cn | User Guide - Page 101
using the tool provided by the operating system. See the instructions below. a. Select Network Connections from Control Panel. b. box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device - Dell 3110cn | User Guide - Page 102
of the printer on Dell Printer Configuration Web Tool. 6. Reboot the printer. 7. Restore Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. Scene 2. Construct new wireless network environment for both computer and printer - Dell 3110cn | User Guide - Page 103
instructions below for Use Windows to configure my manual of the wireless setting tool provided by your wireless device manufacturer. 2. Check the IP address assigned by AutoIP on the printer. e.g.: 168.254.1.1 3. Check that the IP address on your computer is assigned by DHCP. 4. Open Dell Printer - Dell 3110cn | User Guide - Page 104
.1.1 5. Create wireless setting of the printer on Dell Printer Configuration Web Tool. 6. Reboot the printer. 7. Restore the wireless setting on NOTE: WhenWhen your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your - Dell 3110cn | User Guide - Page 105
. See the instructions below. a. Select Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. 2. Check the IP address on your computer. e.g.: 1.2.3.4 3. Set the IP address on the printer. e.g.: 1.2.3.5 4. Open Dell Printer - Dell 3110cn | User Guide - Page 106
box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. Wireless Setting through Dell Printer Configuration Web Tool - Advanced setup Access point (Infrastructure, DHCP - Dell 3110cn | User Guide - Page 107
See the instructions below. a. Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. 2. Set up the printer wireless adapter IP address. a. Reset the settings for the wireless adapter to the default. i. Press Menu on printer - Dell 3110cn | User Guide - Page 108
IP Address. (Default IP address range: 169.254.xxx.yyy ) 3. Access Dell Printer Configuration Web Tool button without restarting the printer (Ignore the screen instructions to restart the printer). vi. Click printer installation method to complete driver installation. 5. To communicate with printer - Dell 3110cn | User Guide - Page 109
printer in the list in the Preferred Network group g. Click Move up to move the setting to the top of the list. h. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual . See the instructions below. a. Select - Dell 3110cn | User Guide - Page 110
box. NOTE: When your OS is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your as that of your computer. Match the subnet mask and gateway addresses of the printer to your computer settings. a. Press Menu button. b. Scroll to Admin menu - Dell 3110cn | User Guide - Page 111
printer from Dell Printer instructions printer in the list in Preferred Network group. g. Click Move up to move the setting to the top of the list. 8. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual - Dell 3110cn | User Guide - Page 112
until Report/List appears, and then press . c. Printer Setting is displayed. Press . The printer settings page is printed. d. Verify Wireless LAN Adapter is listed in the printer settings under Printer Options. If it is not listed, turn off the printer, unplug the power cable, and reinstall the - Dell 3110cn | User Guide - Page 113
for your printer helps avoid printing troubles. This For the best print quality in color, use 75 g/m2 (20 instructions. Paper Characteristics The following paper characteristics affect print quality and reliability. Dell feeding problems. Curl usually occurs after the paper passes through the printer, - Dell 3110cn | User Guide - Page 114
toner does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems chosen is acceptable for laser printers. Always print several color. Unacceptable Paper The following paper types are not recommended for use with the printer - Dell 3110cn | User Guide - Page 115
can be affected by the temperature in the printer fuser Preprinted papers that require a registration (the or acid paper. Selecting Paper Proper paper selection helps prevent jams and ensures trouble-free printing. To help avoid jams or poor print quality: Always use new the stack on a level surface. - Dell 3110cn | User Guide - Page 116
or releasing hazardous emissions. Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are oxidationset or oil-based the preprinted letterhead you have selected is acceptable for laser printers. Page orientation is important when printing on letterhead. Use - Dell 3110cn | User Guide - Page 117
source Standard 250-sheet tray Face up Optional 550-sheet feeder Print side Page orientation Letterhead enters the printer last Multipurpose feeder Face down Letterhead enters the printer first Selecting Pre-punched Paper Pre-punched paper brands can differ in the number and placement of holes - Dell 3110cn | User Guide - Page 118
levels of light wrinkling. Before buying large quantities of any print media, Dell recommends trying a sample first. See "Loading the Multipurpose Feeder" for instructions on loading an envelope. When printing on envelopes: Use only high-quality envelopes that are designed for use in laser printers - Dell 3110cn | User Guide - Page 119
square inch (psi). Before buying large quantities of any print media, Dell recommends trying a sample first. When printing on labels: Set the paper type to Label in the Tray Settings. Set the paper type to Label from the printer driver. Do not load labels together with paper or transparencies in the - Dell 3110cn | User Guide - Page 120
also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. Use labels edge of the sheet. Dell recommends zone coating of the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive material contaminates your printer and could void your - Dell 3110cn | User Guide - Page 121
Print Media Sizes and Support A4 A5 B5 Letter Folio (8.5 x 13 in.) Legal (8.5 x 14 in.) Executive COM-10 Envelope Monarch C5 DL Yokei size2 Yokei size3 Yokei mm (8.27 in.) to 355.6 mm (14.00 in.) long. *3 The duplexer supports user-specified print media that are 148.5 mm (5.85 in.) to 215.9 mm - Dell 3110cn | User Guide - Page 122
Recycled Multipurpose feeder Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Standard 250-sheet Optional 550-sheet tray feeder Y Y N N Y Y N N Y Y N N Y Y N N N N Y Y Y Y N N Y Y N N N N N N N N Y Y Optional duplexer Y N Y N Y N N N N N Y N N N N N N Y Setup Paper Type - Dell 3110cn | User Guide - Page 123
-216 - JPN Coated 95-105 Inkjet Printer paper cannot be used. Coated 106-163 Inkjet Printer paper cannot be used. Coated Thick 164-216 Inkjet Printer paper cannot be used. Transparency - Inkjet Printer paper cannot be used. Label - Inkjet Printer paper cannot be used. Envelopes - - - Dell 3110cn | User Guide - Page 124
prevent jams and ensures trouble-free printing. Before loading the Multipurpose Feeder Linking Trays Using the Duplex Function Using the Center Output Tray Using the laser print media. Do not use ink jet paper in the printer. All trays are loaded the same way. 1. Pull the tray out of the printer - Dell 3110cn | User Guide - Page 125
2. Slide the width guides to the edge of the tray. The width guides should be fully extended. NOTE: For Letter paper, push the lever to the 8.5" position. 3. Slide the tray to the size of the paper to be loaded by using the length guide. - Dell 3110cn | User Guide - Page 126
-specified print media, fully extend the tray by squeezing the length guide at the back of the tray. 4. Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface. 5. Place the print media into the tray with the recommended - Dell 3110cn | User Guide - Page 127
250-sheet tray Face up Optional 550-sheet feeder Print side Page orientation Letterhead enters the printer last Multipurpose feeder Face down Letterhead enters the printer first Multipurpose Feeder Capacity The multipurpose feeder can hold approximately: 150 sheets of the standard paper - Dell 3110cn | User Guide - Page 128
can use various other sizes and types of print media such as envelopes, and transparencies. 1. Gently pull open the multipurpose feeder cover. 2. Slide the width guides to the edge of the tray. The width - Dell 3110cn | User Guide - Page 129
feeder. NOTE: Do not force the print media. 4. Slide both width guides until they rest lightly against the edge of the print media stack. NOTE: program and select the print media size and type on the printer operator panel. Loading Envelopes To load envelopes in the multipurpose feeder, insert - Dell 3110cn | User Guide - Page 130
Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and damage to the printer. Using the Multipurpose , use only high-quality print media that is designed for use in laser printers. For more guidelines on print media, see "Print Media Guidelines." Do - Dell 3110cn | User Guide - Page 131
. For sizes that are acceptable for duplex printing, see "Print Media Sizes and Support." Duplex printing is only available when the optional duplexer is installed on the printer. For information on how to install the duplexer, see "Installing a Duplexer." Using Booklet Print To use booklet print - Dell 3110cn | User Guide - Page 132
Flip on Long Edge Assumes binding along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation). The following illustration shows long-edge binding for portrait and landscape pages: Flip on Short Edge Assumes binding along the short edge of the page ( - Dell 3110cn | User Guide - Page 133
Using the Output Tray Extension The output tray extension is designed to prevent print media from falling from the printer after the print job is complete. Before printing a document, make sure the output tray extension is fully extended. - Dell 3110cn | User Guide - Page 134
occurs. 1. LCD display 2. Ready indicator Lights green when the printer is ready or sleeping and blinks when data is being received. 3. buttons In the Menu mode, scrolls through menus or items. To enter numbers or passwords for secure print jobs, press these buttons. 4. Menu button Switches - Dell 3110cn | User Guide - Page 135
In the Menu mode, displays the selected menu or item and determines the selected value. In the Print mode, prints data that is in the printer. Printing a Panel Settings Page The Panel Settings page shows current settings for the operator panel menus. 1. Press Menu. 2. Press until Report/List appears - Dell 3110cn | User Guide - Page 136
driver settings, changes made to the printer settings override changes made from the printer operator panel and may require you to change the operator panel default settings. If you cannot change a setting from your software program, use the printer operator panel or the Dell Printer Configuration - Dell 3110cn | User Guide - Page 137
, press Cancel. Driver settings may override changes previously made and may require you to change the operator panel defaults. NOTE: Driver settings you choose from your software program may override the settings you select from the operator panel. Using the Dell Printer Configuration Web Tool - Dell 3110cn | User Guide - Page 138
page: 1. Press Menu. 2. Press until Report/List appears, and then press . 3. Printer Setting is displayed. Press . The printer settings page is printed. Resetting Defaults After executing this function and rebooting the printer, all the menu parameters, except the parameters for the network, are - Dell 3110cn | User Guide - Page 139
. 4. Press until Reset LAN or Reset MPC appears, and then press . 5. The Are you sure? message appears on the operator panel. Press . 6. Turn off the printer, and then on again to apply the settings. - Dell 3110cn | User Guide - Page 140
by the administrator. In this case, you can access the Stored Print, and Tray Settings menus only. However, you can use your printer driver to override printer user defaults and select settings for individual print jobs. To complete print jobs, you may also need to modify tray settings. Using the - Dell 3110cn | User Guide - Page 141
of paper jam and fatal errors. Print Meter Purpose: To print the reports for the total number of pages printed. When printed using either the printer control panel or Dell Printer Configuration Web Tool, the report will be titled Print Volume Report. - Dell 3110cn | User Guide - Page 142
the Wired Network menu to change printer settings affecting jobs sent to the printer through the wired network. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Ethernet Purpose: To specify the communication speed and the duplex settings of Ethernet. The change becomes - Dell 3110cn | User Guide - Page 143
. Uses 10base-T half-duplex. 10Base Half Uses 10base-T full-duplex. 10Base Full Uses 100base-TX half-duplex. 100Base Half Uses 100base-TX full-duplex. 100Base Full TCP/IP Purpose: To specify the TCP/IP settings for the wired network. The change becomes effective after the printer is turned off - Dell 3110cn | User Guide - Page 144
version 16.03 or later are installed. Since you cannot set IPsec in Windows Vista in this mode, use the Dell Printer Configuration Web Tool. The Get Information from Printer function on the Options tab of the printer driver is not available when using this mode. Protocol Purpose: To enable or - Dell 3110cn | User Guide - Page 145
the E-Mail Alert feature. Disable EWS Enables an access to Dell Printer Configuration Web Tool Enable* embedded in the printer. Disables an access to Dell Printer Configuration Web Tool Disable embedded in the printer. AppleTalk*1 Enables the AppleTalk port. Enable* Disables the AppleTalk port - Dell 3110cn | User Guide - Page 146
TLS port. Enable* Disables the HTTP-SSL/TLS port. Disable *1 Only displayed when an optional multi protocol card is installed on the printer and the optional wireless printer adapter is not installed on the card. IPX/SPX Purpose: To configure the IPX/SPX settings for the wired network. The change - Dell 3110cn | User Guide - Page 147
After executing this function and rebooting the printer, all wired network settings are reset to their default values. Adobe Protocol Purpose: To specify protocol is in binary format. TBCP Used when the communication protocol supports both ASCII and binary data to switch between them according to - Dell 3110cn | User Guide - Page 148
. No Reception Reset Wireless Purpose: To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values. TCP/IP Purpose: To specify the TCP/IP settings for the wireless network. The change becomes - Dell 3110cn | User Guide - Page 149
version 16.03 or later are installed. Since you cannot set IPsec in Windows Vista in this mode, use the Dell Printer Configuration Web Tool. The Get Information from Printer function on the Options tab of the printer driver is not available when using this mode. Protocol Purpose: To enable or - Dell 3110cn | User Guide - Page 150
Values: LPD Enables the LPD port. Enable* Disables the LPD port. Disable Port9100 Enables the Port9100 port. Enable* Disables the Port9100 port. Disable IPP Enables the IPP port. Enable* Disables the IPP port. Disable SMB TCP/IP Uses TCP/IP for SMB. Enable* Does not use TCP/IP for SMB. - Dell 3110cn | User Guide - Page 151
the E-Mail Alert feature. Disable EWS Enables an access to Dell Printer Configuration Web Tool Enable* embedded in the printer. Disables an access to Dell Printer Configuration Web Tool Disable embedded in the printer. AppleTalk Enables the AppleTalk port. Enable* Disables the AppleTalk port - Dell 3110cn | User Guide - Page 152
received from certain IP addresses through the wireless network is blocked. You can set up to 5 IP addresses. The change becomes effective after the printer is turned off and then on again. Values: IP Filter*1 No. n/Address (n is 1 to 5.) Sets the IP address for Filter n. No. n/Mask (n is 1 to - Dell 3110cn | User Guide - Page 153
is in binary format. TBCP Used when the communication protocol supports both ASCII and binary data to switch between them according the factory default menu settings. ECP Purpose: To specify the ECP communication mode of the parallel interface. The change becomes effective after the printer is - Dell 3110cn | User Guide - Page 154
protocol is in binary format. TBCP* Used when the communication protocol supports both ASCII and binary data to switch between them according to the Settings menu to change printer settings affecting a USB port. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Adobe - Dell 3110cn | User Guide - Page 155
is in binary format. TBCP* Used when the communication protocol supports both ASCII and binary data to switch between them according to printer settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. PowerSaver Time Purpose: To specify the amount of time the printer - Dell 3110cn | User Guide - Page 156
data from the computer. When this timeout expires, the print job is canceled. Values: Disables the job timeout. Off Specifies the amount of time the printer waits for additional data before it cancels the job. 5-300 sec 30 sec* Panel Language Purpose: To determine the language of the text on the - Dell 3110cn | User Guide - Page 157
Italian German Spanish Danish Dutch Norwegian Swedish Auto Log Print Purpose: To specify whether the printer outputs logs automatically. Values: Does not print the logs. Off* Prints the logs. On where the user ID is printed. This feature is available for the PCL driver and unavailable for the PS - Dell 3110cn | User Guide - Page 158
not be printed correctly. Print Text Purpose: To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Text data is printed on A4 or Letter size loaded. This feature is available for the PCL driver but is not available for the PS - Dell 3110cn | User Guide - Page 159
automatically. Enable* NOTE: The RAM Disk menu is only displayed when 256 MB or more of additional print memory is installed on the printer. NOTE: Restart your printer when you change the settings for the RAM Disk menu. Substitute Tray Purpose: Specifies whether or not to use another size paper when - Dell 3110cn | User Guide - Page 160
next largest size. When there is no larger paper size, the printer Larger Size substitutes paper of nearest size. Nearest Size Substitutes paper of Values: Selects millimeter as the default measurement unit. millimeter(mm)* inch(") Selects inch as the default measurement unit. Maintenance Use - Dell 3110cn | User Guide - Page 161
Plain Normal* Light Label Normal* Light Adjust BTR NOTICE: The print quality changes depending on the setting values you select for this item. Purpose: To specify the reference voltage settings for the transfer roller. Values: Plain -3 - +3 0* Plain Thick -3 - +3 0* Transparency -3 - +3 0* - Dell 3110cn | User Guide - Page 162
Label -3 - +3 0* Coated -3 - +3 0* Coated Thick -3 - +3 0* Envelope -3 - +3 0* Recycled -3 - +3 0* JPN Coated -3 - +3 0* JPN Postcard -3 - +3 0* Adjust Fuser NOTICE: The print quality changes depending on the setting values you select for this item. Purpose: To specify the - Dell 3110cn | User Guide - Page 163
Plain -2 - +2 0 Plain Thick -2 - +2 0 Transparency -2 - +2 0 Covers -2 - +2 0 Covers Thick -2 - +2 0 Label -2 - +2 0 Coated -2 - +2 0 Coated Thick -2 - +2 0 Envelope -2 - +2 Recycled 0 -2 - +2 0 - Dell 3110cn | User Guide - Page 164
the registration automatically. On* Does not adjust the registration automatically. Off Color Reg Adj Purpose: To print the color registration chart and to adjust the color registration by using the chart. This function is required after the printer is set up or moved. Values: Auto Correct Adjusts - Dell 3110cn | User Guide - Page 165
memory is installed on the printer and then the RAM Disk menu is set to Enable. Non-Dell Toner NOTICE: When Non-Dell toner is used, the printer may be severely damaged and may not be covered by your warranty. Purpose: To specify whether to use the refilled print cartridge or not. When this setting - Dell 3110cn | User Guide - Page 166
settings that only affect jobs using the PCL emulation printer language. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Paper Tray Purpose: To specify the input tray. Values: Auto* Automatically selects a tray according to the paper size and type settings of the - Dell 3110cn | User Guide - Page 167
10 B5 JPN Postcard Letter*1 Youkei 2 Env 8.5x13" Youkei 3 Env Legal Youkei 4 Env Executive Youchou 3 Env Monarch Choukei 3 Env DL Custom Size *1 Denotes country-specific factory default set duplexing as the default for all print jobs. (Select Duplex from the printer driver to duplex only - Dell 3110cn | User Guide - Page 168
specific jobs.) NOTE: Values marked by an asterisk (*) are the factory default menu settings. NOTE: The 2 Sided menu is only available when the optional duplexer is installed on the printer. Values: 2 Sided Print Binding Edge Off* On Flip Long Edge* Flip Short Edge Prints on one side of the paper - Dell 3110cn | User Guide - Page 169
Coronet Marigold Arial Arial It Arial Bd Arial BdIt Times New Times New It Times New Bd Times New BdIt Symbol Wingdings Line Printer Times Roman Times It Times Bd Times BdIt Helvetica Helvetica Ob Helvetica Bd Helvetica BdOb CourierPS CourierPS Ob CourierPS Bd CourierPS BdOb - Dell 3110cn | User Guide - Page 170
Symbol Set Purpose: To specify a symbol set for a specified font. Values: ROMAN-8* ISO L1 ISO L2 ISO L5 ISO L6 PC-8 PC-8 DN PC-775 PC-850 PC-852 PC-1004 PC-8 TK WIN L1 WIN L2 WIN L5 DESKTOP PS TEXT MC TEXT MS PUB MATH-8 PS MATH PI FONT LEGAL ISO-4 ISO-6 ISO-11 ISO-15 ISO-17 - Dell 3110cn | User Guide - Page 171
Point Size" Font Pitch Purpose: To specify the font pitch for scalable monospaced fonts. Values: The values are in steps of 0.01. 6.00 - 24.00 10.00* Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For nonscalable monospaced fonts, the pitch is displayed, but - Dell 3110cn | User Guide - Page 172
item to:" Quantity Purpose: To set the number of copies you want for the printer default value. (Set the number of copies required for a specific job from the printer driver. Values selected from the printer driver always override values selected from the operator panel.) Values: The values are in - Dell 3110cn | User Guide - Page 173
print job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not executed. Values: Disables the Hex Dump feature. Disable* Enables the Hex Dump feature. Enable Draft Mode Purpose: To save toner - Dell 3110cn | User Guide - Page 174
. CR-XX CR=CR-LF, LF=CR-LF, FF=CR-FF Default Color Purpose: To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not specified for the print job that is sent to the printer. Value: Prints in the black and white mode. Black* Prints - Dell 3110cn | User Guide - Page 175
job without printing an error message. Off NOTE: This instructions from the PS driver override the settings specified on the operator panel. PS Job compatible with regular Post Script printers. Select FromTray Panel Settings Use the Panel Settings menu to set a password to limit access to the - Dell 3110cn | User Guide - Page 176
an asterisk (*) are the factory default menu settings. See also: "Setting of Panel Lock" Panel Lock Purpose: To limit access to the menus. Values: Does not limit access to the menus. Disable* Limits access to the menus. Enable Change Password Purpose: To set a password to limit access to the menus - Dell 3110cn | User Guide - Page 177
MPF Purpose: To specify the paper loaded in the multipurpose feeder. Values: Plain* Paper Type Plain Thick Transparency Covers Covers Thick Label Coated Coated Thick Envelope Recycled JPN Coated JPN Postcard Plain S2 Plain Thick S2 Covers S2 Covers Thick S2 Coated S2 Coated Thick S2 Recycled S2 JPN - Dell 3110cn | User Guide - Page 178
10 JPN Postcard Youkei 2 Env Youkei 3 Env Youkei 4 Env Youchou 3 Env Choukei 3 Env Custom Size MPF Mode Stop printing and show an error on the operation panel if the paper Panel Specified specified from the printer driver supported paper size for the standard and optional trays, see "Print Media - Dell 3110cn | User Guide - Page 179
Optimize print quality for the specified paper. Select paper source through your software program by selecting type and size. Automatically link trays. The printer automatically links any trays containing the same type and size of paper, if you have set the Paper Type to the correct values. Tray 1 - Dell 3110cn | User Guide - Page 180
Custom Size Stored Print This Stored Print menu provides applicable printing services such as Secure Print and Proof Print. NOTE: The Stored the printer. Secure Print Purpose: To print confidential jobs. The printer can hold the job in memory until you arrive at the printer and type the password on - Dell 3110cn | User Guide - Page 181
the menu and printer settings remain unchanged. For regular printing, items can be configured using the printer driver. NOTE: Disabling and then press . 6. Press . 7. Press until Change Password appears, and then press . 8. Enter the old password (when you enter it for the first time after doing the - Dell 3110cn | User Guide - Page 182
holding Menu, turn on the printer. Continue to hold Menu until the display indicates Ready to Init. Release Menu and press . Press to select Yes, then press . The display will briefly indicate Password has been initialized. This will recover the factory default panel password. NOTE: If panel lock is - Dell 3110cn | User Guide - Page 183
much toner and paper are remaining or the configuration of options for the local printer. Status Monitor Console Use the Status Monitor Console to manage multiple Status Window. Select a printer from the list view (or Printer Selection) by clicking its name to open a Status Window or Dell Printer - Dell 3110cn | User Guide - Page 184
printer automatically by two-way communication, a window that prompts you to type the Service Tag number appears. Type your Dell printer Service Tag number in the field provided. Your Service Tag installing the printer driver. Install in advance the Dell™ Color Laser Printer 3110cn printer driver in - Dell 3110cn | User Guide - Page 185
Software Update The firmware and/or driver updates can be downloaded from http://support.dell.com. - Dell 3110cn | User Guide - Page 186
" If you experience a jam, see "Clearing Jams" for instructions. Sending a Job to Print To support all of the printer features, use the printer driver. When you choose Print from a software program, a window representing the printer driver opens. Select the appropriate settings for the specific job - Dell 3110cn | User Guide - Page 187
from the driver override the default menu settings selected from the printer operator panel. You may need to click Properties or Setup from the initial Print box to see all of the available printer settings you can change. If you are not familiar with a feature in the printer driver window, open the - Dell 3110cn | User Guide - Page 188
Faxes. Click Start Control Panel Hardware and Sound A list of available printers appears. Printers (for Windows Vista™). 3. Double-click the printer you selected when you sent the job. A list of print jobs appears in the printer window. 4. Select the job you want to cancel. 5. Press on - Dell 3110cn | User Guide - Page 189
need to configure the RAM disk settings on both the operator panel and the printer driver. NOTE: Depending on the documents, its job may be too big for a list. If you select Secure Print, you must type the password you specified in the driver when you sent the job. See "Secure Print" for more - Dell 3110cn | User Guide - Page 190
. Press . 4. Press until your user name appears, and then press . 5. If you print confidential jobs (Secure Print jobs), enter the password you have specified on the printer driver, and then press . 6. Press until the job you want to print appears, and then press . 7. Press until the action you want - Dell 3110cn | User Guide - Page 191
you select Del after Print, the held job is automatically deleted after printing. Secure Print When you send a job to the printer, you can specify a password from the driver. The password must be between 1 and 12 digits using numbers 0 through 9. The job is then held in print memory until you enter - Dell 3110cn | User Guide - Page 192
NOTE: The printer holds the job until you delete it by using the operator panel or you turn off the printer. The data on memory is cleared when the printer is turned off. NOTE: When you select Del after Print, the held job is automatically deleted after printing. - Dell 3110cn | User Guide - Page 193
name text box. 6. Click OK. The PCL driver supports an Additional Driver for Windows Vista (not including Itanium). To register the Additional Driver, follow the instructions below. 1. Click Start Control Panel Hardware and Sound Printers. 2. Right-click the printer's icon and select Sharing. 3. 4. - Dell 3110cn | User Guide - Page 194
Click the Browse button and locate the driver in the Drivers and Utilities CD. To check that the printer was successfully shared: Make sure the printer object in the Printers and Faxes (Printers for Windows 2000) folder shows it is shared. For example, in Windows 2000, a hand is shown underneath the - Dell 3110cn | User Guide - Page 195
then click Yes (For Windows 2000, click OK). If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will need to provide a path to available drivers. 6. Select whether you want this printer to be the default printer for the client, click - Dell 3110cn | User Guide - Page 196
installation process. 4. If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will need to provide a path to available drivers. 5. Select whether you want this printer to be the default printer for the client, click Next. 6. If you - Dell 3110cn | User Guide - Page 197
The distinct design is called a typeface. The typefaces you select add personality to a document. Well-chosen typefaces make a document easier to read. The printer has numerous resident fonts in PCL 5/PCL 6 and PostScript 3. See "Resident Fonts" for a listing of all resident fonts. Weight and style - Dell 3110cn | User Guide - Page 198
space fonts. It is a measure of the number of characters that will print in one horizontal inch of type. For example, all 10pitch fonts print 10 characters per inch (cpi) and all 12-pitch fonts print 12 cpi: In proportional (or typographic) fonts, every character can have a different width. Since - Dell 3110cn | User Guide - Page 199
stored as computer programs that define the outlines of the characters in the font. Each time you print characters from a scalable font, the printer creates a bitmap of the characters at the point size you choose and saves it temporarily in print memory. These temporary bitmapped fonts are deleted - Dell 3110cn | User Guide - Page 200
Courier and TimesNew (PCL 5/PCL 6)/Times New Roman (PostScript 3), are available for all printer languages. The following table lists all the fonts resident in your printer. See "Printing a Font Sample List" for instructions on how to print samples of the fonts. You can select the resident fonts - Dell 3110cn | User Guide - Page 201
AntiqueOlv Bd ITC AvantGarde Gothic Demi Oblique Bodoni Roman CG Omega Bodoni Italic CG Omega It Bodoni Bold CG Omega Bd Bodoni Bold Italic CG Omega BdIt Bodoni Poster Bodoni Poster Compressed Garamond Antiqua ITC Bookman Light Garamond Krsv ITC Bookman Light Italic Garamond Hlb ITC - Dell 3110cn | User Guide - Page 202
Marigold Arial Arial It Arial Bd Arial BdIt TimesNew TimesNew It TimesNew Bd TimesNew BdIt Symbol Wingdings Line Printer Times Roman Times It Times Bd Times BdIt Helvetica Helvetica Ob Helvetica Bd Helvetica BdOb Eurostile Bold Extended No. 2 Geneva Gill Sans Gill Sans Italic - Dell 3110cn | User Guide - Page 203
CourierPS Hoefler Text CourierPS Ob Hoefler Text Italic CourierPS Bd Hoefler Text Black CourierPS BdOb Hoefler Text Black Italic Hoefler Ornaments SymbolPS Joanna Joanna Italic Palatino Roman Joanna Bold Palatino It Joanna Bold Italic Palatino Bd Letter Gothic Palatino BdIt Letter - Dell 3110cn | User Guide - Page 204
ITC A G Go BkOb Optima Bold Italic ITC A G Go Dm Oxford ITC A G Go DmOb Palatino Roman Palatino Italic ZapfC MdIt Palatino Bold Palatino Bold Italic ZapfDingbats Stempel Garamond Roman Stempel Garamond Italic Stempel Garamond Bold Stempel Garamond Bold Italic Symbol Tekton Regular - Dell 3110cn | User Guide - Page 205
each key on the keyboard (or more specifically, for each code point). Some applications require different characters at some code points. To support multiple applications and languages, your printer has 36 symbol sets for the resident PCL 5/PCL 6 fonts. Symbol Sets for PCL 5/PCL 6 Not all font names - Dell 3110cn | User Guide - Page 206
Roman 8 (Default) ISO 8859-1 Latin 1 ISO 8859-2 Latin 2 ISO 8859-9 Latin 5 ISO 8859-10 Latin 6 PC-8 PC-8 DN PC-775 Baltic PC-850 Multilingual PC-852 Latin 2 PC-1004 OS/2 PC Turkish Windows 3.1 Latin 1 Windows 3.1 Latin 2 Windows 3.1 Latin 5 DeskTop PS Text MC Text Microsoft Publishing - Dell 3110cn | User Guide - Page 207
Fuser Contact Support 016-316 Restart Printer Reseat Memory Contact Support What this message means What you can do Error NNN-NNN relates to printer problems. Turn off the printer, and then on. If this does not solve the problem, contact Dell. See "Contacting Dell" in the Owner's Manual. The - Dell 3110cn | User Guide - Page 208
not solve the problem, contact Dell. See "Contacting Dell" in the Owner's Manual. NNN-NNN Restart Printer Reseat XXX Contact Support XXX is not fully PrintCart NNN-NNN Insert XXX Cartridge The specified print cartridge is either missing or not fully inserted into the printer. XXX is one of the - Dell 3110cn | User Guide - Page 209
· Black Print Confirm that the toner seal is removed from the specified print cartridge and the cartridge is installed correctly. If this does not solve the problem, contact Dell. See "Replacing Print Cartridges" See "Contact Dell" in the Owner's Manual. Printer cover is open. Close the specified - Dell 3110cn | User Guide - Page 210
016-799 Data Violation Press Ready to Print 193-700 Non-DELL Toner Installed Over Heat 042-700 Cooling down Please Wait... Ready printer configuration on the printer driver conforms to the printer you are using. The printer is in the custom print cartridge mode. Though some of the print cartridges - Dell 3110cn | User Guide - Page 211
the Optional Duplexer Removing Print Jams From the Optional Feeder NOTE: Before buying large quantities of any print media, Dell recommends trying them. Make sure all cables that connect to the printer are correctly attached. Overtightening the guides may cause jams. Wipe the feeder rollers in the - Dell 3110cn | User Guide - Page 212
jams may occur along the print media path. CAUTION: Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer. 1 Standard 250-sheet tray 2 Optional 550-sheet feeder 3 Multipurpose feeder 4 Optional duplexer 5 Fuser 6 Front cover - Dell 3110cn | User Guide - Page 213
Multipurpose Feeder NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within 5 minutes from the inside of the printer. 2. Remove the 250-sheet tray from the printer, and then pull out the jammed paper remaining inside the printer. If no jammed paper can - Dell 3110cn | User Guide - Page 214
there are no scraps of paper remaining inside the printer. 4. Insert the tray back into the printer, and push until it stops. 5. Open and close the front cover. Removing Print Jams From the Standard Tray NOTICE: To protect the drums of the print cartridges against bright light, close the front cover - Dell 3110cn | User Guide - Page 215
1. 2. Remove all the jammed and/or creased paper from the tray. 3. Pull the jammed paper out carefully to avoid tearing it. If it is still hard to remove the paper, go to the next step to remove the jammed paper from the inside of the printer. 4. - Dell 3110cn | User Guide - Page 216
4. Open the front cover by pushing the side button and remove the jammed paper. Then, confirm that there are no scraps of paper remaining inside the printer. 5. Close the front cover. 6. Insert the tray into the printer, and push until it stops. - Dell 3110cn | User Guide - Page 217
printer. Removing Print Jams From the Fuser NOTICE: Make sure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands on the film of the belt unit may reduce print quality. NOTICE: To protect the drums of the print cartridges - Dell 3110cn | User Guide - Page 218
3. CAUTION: The fuser is hot. Do not touch it, doing so may cause burns. 4. Open the cover of the fuser and remove the jammed paper. 5. Close the cover of the fuser and press down the levers at both ends of the fuser. - Dell 3110cn | User Guide - Page 219
6. Confirm that there are no scraps of paper remaining inside the printer, and then close the front cover. Removing Print Jams From the Optional Duplexer NOTICE: Make sure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands on the - Dell 3110cn | User Guide - Page 220
2. Pull out the jammed paper from the duplexer. If jammed paper cannot be found, go to the next step. 3. Pull up on the belt release levers and rotate the belt unit up as shown in the illustration. 4. Remove the jammed paper and close the belt unit. - Dell 3110cn | User Guide - Page 221
Jams From the Optional Feeder NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within 5 minutes. If the the front slightly, and remove it from the printer. NOTE: Paper in the 550-sheet feeder feeds to the printer from the front of the 250-sheet tray, - Dell 3110cn | User Guide - Page 222
2. Remove all jammed and/or creased paper from the tray. 3. Pull the jammed paper out carefully to avoid tearing it. If it is still hard to remove the paper, go to the next step to remove the jammed paper from the inside of the printer. 4. - Dell 3110cn | User Guide - Page 223
4. Open the front cover by pushing the side button and remove the jammed paper. Then, confirm that there are no scraps of paper remaining inside the printer. 5. Close the front cover. - Dell 3110cn | User Guide - Page 224
the paper jam message is not cleared after closing the front cover, pull out the 250-sheet tray from the printer and remove the jammed paper. 6. Insert the tray back into the printer, and push until it stops. CAUTION: Do not use excessive force on the tray. Doing so could damage the - Dell 3110cn | User Guide - Page 225
Troubleshooting Troubleshooting Guide This section consists of the following instructions. Configuration of your printer instructions User Troubleshooting Instructions Diagnostic Menu Map (Customer Mode) Testing "Print Quality" Testing "Toner Pallet Check" or "Contamination Chk" Other Problems - Dell 3110cn | User Guide - Page 226
with the printer, options, or print quality. Troubleshooting Guide Basic Printer Problems Display Problems Printing Problems Print Quality Problems Option Problems Other Problems Contacting Service Troubleshooting Guide Installing Printer Drivers Basic Printer Problems Some printer problems can be - Dell 3110cn | User Guide - Page 227
printer driver, the printer utilities, or the software program instead of the operator panel. Printing Problems Problem Supported" for more information. Flex print media before loading it in any of the sources. Make sure the print media is loaded correctly. Make sure the width and length guides - Dell 3110cn | User Guide - Page 228
does not duplex pages. Make sure 2 Sided is selected in both the PCL (Printer Control Language) menu on the printer operator panel and in the printer driver. Make sure you have enough print memory installed. Print Quality Problems Problem Print is too light. Action · The print cartridges may be - Dell 3110cn | User Guide - Page 229
Settings". · Verify that the print media is within the printer specifications. · The fuser is old or damaged. Replace the fuser. See "Replacing the Fuser". Toner spots appear on the page/printing is blurred. · Check the print cartridges to make sure they are installed correctly. · Change the - Dell 3110cn | User Guide - Page 230
page. of toner in each print cartridge and replace it with a new one if necessary. See "Replacing Print Cartridges." · If you are using fonts are supported by the printer, the host computer, and the software program. Part or all of the page prints in black. · Check the print cartridges to make - Dell 3110cn | User Guide - Page 231
the printer to an appropriate environment. Color registration is out of alignment. · Print the color registration chart and adjust the color registration from the operator panel by using the chart. See "Color Reg Adj" for more details. Colored dots are printed · Replace the print cartridge that - Dell 3110cn | User Guide - Page 232
mode. If the problems still occur, contact Dell. See "Contacting Dell" in the Owner's Manual. · This occurs when you print on talc paper or acid paper. Use neutralized paper. Vertical blanks · A print cartridge is damaged. Replace the print cartridge with a new one. Option Problems If an option - Dell 3110cn | User Guide - Page 233
Make sure the option is selected in the printer driver you are using. The following table lists printer options and corrective actions for related problems. If the suggested corrective action does not correct the problem, call customer service. Problem Action Optional tray · Make sure the 550 - Dell 3110cn | User Guide - Page 234
Troubleshooting Guide Configuration of your printer instructions User Settings Menu Map - Dell 3110cn | User Guide - Page 235
Setup printing Letter Plain 1 from Multipurpose Feeder 1. On the printer operator panel press MENU. 2. Press to get to Tray Settings. 3. Press to select Tray Settings. 4. Press to get to Paper Size. (ONLY ON 3x00cn) 5. 6. - Dell 3110cn | User Guide - Page 236
is displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn) 10. Now we have the MPF Size set to Letter. (ONLY ON 3x00cn) 11. Now same driver properties window. 26. Open up Word and create a new document. 27. Go to File Print. 28. Select the Dell Color Laser Printer from the printers list - Dell 3110cn | User Guide - Page 237
36. Click OK. 37. Click Close. 38. Now the printer driver is setup correctly. 39. Now go to File Page Setup . Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER". 43. Click OK. 44. Type in line, this puts a * by it. (ONLY ON 3x00cn) 10. Now we have the Tray 1 Size set to Letter. ( - Dell 3110cn | User Guide - Page 238
you go File Print and then click the Properties button, you will get this same driver properties window. 26. Open up Word and create a new document. 27. Go to File Print. 28. Select the Dell Color Laser Printer from the printers list. 29. Click the Properties button to the right. 30. This brings up - Dell 3110cn | User Guide - Page 239
printer driver is setup correctly. 39. Now go to File Page Setup. 40. Click the Paper Tab. 41. Change Paper Size to Legal. 42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER lower line, this puts a * by it. (ONLY ON 3x00cn) 10. Now we have the Tray 2 Size set to Letter. (ONLY - Dell 3110cn | User Guide - Page 240
all the hardware settings on the printer correct Now, all software settings driver properties window. 26. Open up Word and create a new document. 27. Go to File Print. 28. Select the Dell Color Laser Printer from the printers 37. Click Close. 38. Now the printer driver is setup correctly. 39. Now go - Dell 3110cn | User Guide - Page 241
Transparency is displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn) 10. Now we have the MPF Size set to Transparency. (ONLY ON 3x00cn) 11. Now press 25. We now have all the hardware settings on the printer correct Now, all software settings screen shots are from WORD, this was done in - Dell 3110cn | User Guide - Page 242
same driver properties window. 26. Open up Word and create a new document. 27. Go to File Print. 28. Select the Dell Color Laser Printer from the printers list Size to Legal. 42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER". 43. Click OK. 44. Type in some gibberish in the - Dell 3110cn | User Guide - Page 243
displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn) 10. Now we have the MPF Size set to Envelope. (ONLY ON 3x00cn) 11. Now same driver properties window. 26. Open up Word and create a new document. 27. Go to File Print. 28. Select the Dell Color Laser Printer from the printers list - Dell 3110cn | User Guide - Page 244
OK. 37. Click Close. 38. Now the printer driver is setup correctly. 39. Now go to File the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER". 43. Click OK. 44. Type 9. Using and , select the appropriate paper size (Letter). 10. Press the middle button, SELECT, once Letter is displayed - Dell 3110cn | User Guide - Page 245
, you go File Print and then click the Properties button, you will get this same driver properties window. 27. Open up Word and create a new document. 28. Go to File Print. 29. Select the Dell Color Laser Printer from the printers list 30. Click the Properties button to the right. 31. This brings up - Dell 3110cn | User Guide - Page 246
is attached to a network and not your computer, see "Setting Up Network Printing" in the Owner's Manual. Installing Printer Drivers Microsoft® Windows Vista™ 1. Insert the Drivers and Utilities CD into your computer. NOTE: Click Continue when the User Account Control dialog box appears. 2. Click - Dell 3110cn | User Guide - Page 247
Finish. Windows XP, Windows XP 64-bit Edition, Windows Server ® 2003, Windows Server 2003 64-bit Edition, and Windows 2000 1. Connect the printer to Hardware Wizard dialog box appears, follow the on-screen instructions to install the printer driver on your computer. 7. When the Completing the Found - Dell 3110cn | User Guide - Page 248
set-up configurations, refer to your User's Guide. Disable Microsoft® Windows Vista or Windows XP Firewall Before Printer Software Installation NOTE: This step may not be necessary if you have Windows XP Service Pack 2 installed. If your multifunction printer is connected directly to a network and - Dell 3110cn | User Guide - Page 249
Mode for network printing, you cannot install the printer driver from the Drivers and Utilities CD. Use the Add Printer wizard in Windows Vista. For details, see " Printing With Web Services for Devices (WSD)" in the User's Guide. 1. Insert the Drivers and Utilities CD into your computer to launch - Dell 3110cn | User Guide - Page 250
to set a printer as the default, select the Set this printer as default check box. d. If you want to restrict color printing, select the appropriate Dell ColorTrack option. Enter the password when Color-Password Enabled is selected for Dell ColorTrack. e. If the postscript driver is available and - Dell 3110cn | User Guide - Page 251
1. Launch the Dell Printer Configuration Web Tool. 2. Click E-Mail Alert link. 3. Under Setup printer. Scene 1. Install a printer to the already-operating wireless network (When wireless setting is already set to your computer) 1. Insert the Drivers and Utilities CD into your computer. 2. The Drivers - Dell 3110cn | User Guide - Page 252
the following operating systems: Windows XP x64 Windows Server® 2003 x64 Windows Vista x64 Windows Vista x86 ,skip step 11 and go to step 12. 11. If you select the I am setting up this printer on a server check box on the Select Printer screen and also select the PostScript Driver check box on the - Dell 3110cn | User Guide - Page 253
is sent to the printer. 10. On the Wireless configuration is now complete screen, create the wireless setting sent to the printer on your computer tool provided by the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select Network Connections from Control - Dell 3110cn | User Guide - Page 254
by clicking the Print Test Page button. Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your desk. You can view and/or change the printer configuration settings, monitor toner level, and when it is time to order replacement consumables - Dell 3110cn | User Guide - Page 255
Printer screen, and then click Next. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. The steps are as follows. For Windows - Dell 3110cn | User Guide - Page 256
of the list. j. Click OK to close the Property dialog box. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network on the Enter Wireless Network Settings screen is sent to the printer. 10. On the Wireless configuration is now complete screen, change the wireless - Dell 3110cn | User Guide - Page 257
10. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select Network Connections - Dell 3110cn | User Guide - Page 258
Windows XP x64 Windows Server® 2003 x64 Windows Vista x64 Windows Vista x86 ,skip step 12 and go to step 13. 12. If you select the I am setting up this printer on a server check box on the Select Printer screen and also select the PostScript Driver instructions below. For Windows XP and Windows - Dell 3110cn | User Guide - Page 259
added SSID to the top of the list. j. Click OK to close the Property dialog box. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network and Sharing Center. d. address used by AutoIP. 8. Set each item on the Enter Printer Settings screen, and then click Next. 9. - Dell 3110cn | User Guide - Page 260
is sent to the printer. 10. On the Wireless configuration is now complete screen, create the wireless setting sent to the printer on your computer tool provided by the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select Network Connections from Control - Dell 3110cn | User Guide - Page 261
by clicking the Print Test Page button. Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your desk. You can view and/or change the printer configuration settings, monitor toner level, and when it is time to order replacement consumables - Dell 3110cn | User Guide - Page 262
the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network and - Dell 3110cn | User Guide - Page 263
the printer. 7. Restore the wireless setting on your computer. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows - Dell 3110cn | User Guide - Page 264
this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select Network Connections from Control Panel. b. Right-click Wireless Network Connection and select Properties. c. Select the - Dell 3110cn | User Guide - Page 265
the printer. 7. Restore the wireless setting on your computer. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows - Dell 3110cn | User Guide - Page 266
you send to the printer in the list in Preferred Network group. g. Click Move up to move the setting to the top of the list. h. Click OK to close the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting - Dell 3110cn | User Guide - Page 267
the Property dialog box. NOTE: When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network and - Dell 3110cn | User Guide - Page 268
the printer. 7. Restore the wireless setting on your computer. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows - Dell 3110cn | User Guide - Page 269
according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network and Sharing Center. d. Select Connect to a network. e. Select the setting you send to the printer from the - Dell 3110cn | User Guide - Page 270
Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista e.g.: 1.2.3.4 3. Set the IP address on the printer. e.g.: 1.2.3.5 4. Open Dell Printer Configuration Web Tool using WEB browser. e.g.: http://1.2.3.5 - Dell 3110cn | User Guide - Page 271
the printer. 7. Restore the wireless setting on your computer. NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below. For Windows - Dell 3110cn | User Guide - Page 272
after confirming the connection is a success. Wireless Setting through Dell Printer Configuration Web Tool - Advanced setup Access point (Infrastructure, provided by the operating system. See the instructions below. For Windows XP and Windows Server 2003: a. Select Network Connections from Control - Dell 3110cn | User Guide - Page 273
Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows v. Scroll down and select IP Address. (Default IP address range: 169.254.xxx.yyy ) 3. Access Dell Printer Configuration Web Tool on your computer browser. a. - Dell 3110cn | User Guide - Page 274
SSID/ communication mode) from Dell Printer Configuration Web Tool. i. restarting the printer (Ignore the screen instructions to restart the printer). vi. printer installation method to complete driver installation. 5. To communicate with printer instructions below. For Windows XP and Windows - Dell 3110cn | User Guide - Page 275
according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista: a. Open Control Panel. b. Select Network and Internet. c. Select Network and Sharing Center. d. Select Connect to a network. e. Select the setting you send to the printer from the - Dell 3110cn | User Guide - Page 276
than Windows 2000, create settings according to the manual of the wireless setting tool provided by your wireless device manufacturer. For Windows Vista: Subnet mask: 255.255.0.0 4. Set the IP address from the printer control panel to be in the same range as that of your computer. Match the - Dell 3110cn | User Guide - Page 277
panel and press enter button. k. Scroll back to Gateway Address. l. Manually enter the gateway address using the directional buttons on the control panel and press the Enter button. m. Restart the printer. 5. Open Dell Printer Configuration Web Tool using the WEB browser. e.g.: http://:192.168 - Dell 3110cn | User Guide - Page 278
. See the instructions below. For Windows XP and Windows Server 2003: printer: Select Access point (Infrastructure) networks only and close the Advanced dialog box. f. Select the setting that you send to the printer than Windows 2000, create settings according to the manual of the wireless - Dell 3110cn | User Guide - Page 279
lock the operator panel. When changing the password for the Dell Printer Configuration Web Tool, click Set Password on the left frame and set the password. Troubleshooting Instructions Use the Customer Mode to locate the unit in the printer that causes a problem. Diagnostic Menu Map (Customer Mode - Dell 3110cn | User Guide - Page 280
20% density on the whole area of the paper. Magenta20% Outputs magenta toner at 20% density on the whole area of the paper. Yellow20% Outputs yellow toner at 20% density on the whole area of the paper. Black20% Outputs black toner at 20% density on the whole area of the paper. After you - Dell 3110cn | User Guide - Page 281
sure? message appears on the operator panel. Press . Turn off the printer, and then on again. Others How to replace Print cartridges CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Owner's Manual. NOTICE: To protect the drums of the print - Dell 3110cn | User Guide - Page 282
Dell recommends Dell print cartridges for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell. CAUTION: Never throw used print cartridges into a fire. The residual toner could explode resulting in burns and - Dell 3110cn | User Guide - Page 283
5 or 6 times to distribute the toner evenly. 2. Remove the print cartridge from its packaging. NOTE: To protect the drum against bright light, do not remove the orange protective cover of the print cartridge before the cartridge is inserted into its slot in the printer. 3. Completely remove the seal - Dell 3110cn | User Guide - Page 284
NOTE: Pull the seal out straight. Pulling the seal diagonally may tear it. 4. Grasp both handles of the print cartridge with the label facing up and slide the cartridge into the same color slot. Make sure the cartridge is fully inserted. 5. Remove the orange protective cover of the installed print - Dell 3110cn | User Guide - Page 285
the multipurpose feeder before opening the front cover. Dell fuser are available only through Dell. To order by phone, see your Owner's Manual. Dell recommends Dell fuser for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not - Dell 3110cn | User Guide - Page 286
3. Lift the chute gate to its upright position. 4. Release the levers at both ends of the fuser. - Dell 3110cn | User Guide - Page 287
5. Hold both sides of the installed fuser, pull it towards the front of the printer to release the connection on the right side, then lift upward to remove. Installing a New Fuser 1. Unpack a new fuser and hold both sides of the - Dell 3110cn | User Guide - Page 288
NOTE: Make sure that the fuser connector is firmly seated. 3. Lock both levers at the ends of the fuser. 4. Lower the chute gate to its horizontal position. - Dell 3110cn | User Guide - Page 289
and follow the safety instructions in your Owner's Manual. Dell separator rollers are available only through Dell. To order by phone, see your Owner's Manual. Dell recommends Dell separator rollers for your printer. Dell does not provide warranty coverage for problems caused by using accessories - Dell 3110cn | User Guide - Page 290
until it stops. Hold the tray with both hands, lift the front slightly, and remove it from the printer. NOTE: Remove all paper from the tray before opening the separator roller cover. 2. Push back the handles on each side of the separator roller cover - Dell 3110cn | User Guide - Page 291
4. Pull the separator roller hook out of the groove in the axle, and then slide the separator roller to the right. Installing the New Separator Roller in the Tray 1. Align the hole of the new separator roller with the axle. - Dell 3110cn | User Guide - Page 292
2. Slide the separator roller along the axle so the protrusions fit completely into the slots and the roller hook re-seats into the groove on the axle. 3. Close the separator roller cover until both sides click into place. 4. Load paper into the tray and replace it into the printer. - Dell 3110cn | User Guide - Page 293
4. Removing the Used Separator Roller Inside the Printer 1. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and remove it from the printer. 2. Turn the separator roller until the roller hook can be seen. - Dell 3110cn | User Guide - Page 294
the axle, and then slide the separator roller to the left. 4. Repeat steps 2 and 3 to remove the other separator roller from the inside of the printer. - Dell 3110cn | User Guide - Page 295
Installing the New Separator Roller Inside the Printer 1. Align the hole of the new separator roller with the axle. 2. Slide the separator roller along the axle so the protrusions fit completely into the slots and the roller hook re-seats into the groove on the axle. 3. - Dell 3110cn | User Guide - Page 296
more than 5 minutes, print quality may deteriorate. Dell belt units are available only through Dell. To order by phone, see your Owner's Manual. Dell recommends Dell belt units for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components - Dell 3110cn | User Guide - Page 297
unit up as shown in the illustration. CAUTION: Do not touch the inside of the printer. Some parts may be hot. Allow time for the printer to cool before attempting to remove parts in this area. 4. Hold both sides of the . Then, shift the belt unit to the right and remove the unit from the printer. - Dell 3110cn | User Guide - Page 298
Installing a New Belt Unit 1. Unpack a new belt unit. 2. Insert the left peg into the corresponding left side belt unit hole, then align the right peg with the groove, and then push down on the right side of the belt unit to seat into place. 3. Close the belt unit by pulling it down until it clicks. - Dell 3110cn | User Guide - Page 299
4. Remove the film cover from the installed belt unit and discard 5. Close the front cover. - Dell 3110cn | User Guide - Page 300
With Web Services for Devices (WSD) This section provides information for network printing with WSD, Microsoft's new Windows Vista protocol. Printer Setup Printer Setup You can install your new printer on the network using the Drivers and Utilities CD that shipped with your printer, or using - Dell 3110cn | User Guide - Page 301
Print Cartridges Replacing the Fuser Replacing Separator Rollers Replacing the Belt Unit Adjusting Color Registration Determining the Status of Supplies If your printer is connected to the network, the Dell Printer Configuration Web Tool can provide instant feedback on remaining toner levels. Type - Dell 3110cn | User Guide - Page 302
at: to order toner for your printer. You can also order print cartridges by the following method. 1. Click Start All Programs Dell Printers Additional Color Laser Software Dell Supplies Management System. The Dell Supplies Management System window appears. 2. Select your printer from the Select - Dell 3110cn | User Guide - Page 303
your Owner's Manual. Dell recommends Dell print cartridges for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell. CAUTION: Never throw used print cartridges into a fire. The residual toner could explode resulting - Dell 3110cn | User Guide - Page 304
to replace and pull it out. CAUTION: Since the used print cartridge may spill some toner, do not shake it. Installing a New Print Cartridge 1. Select the new print cartridge which color matches the color of the handles on the printer cartridge to be replaced and shake it 5 or 6 times to distribute - Dell 3110cn | User Guide - Page 305
, do not remove the orange protective cover of the print cartridge before the cartridge is inserted into its slot in the printer. 3. Completely remove the seal from the print cartridge by pulling the tab on the end of the print cartridge. NOTE: Pull the seal out straight. Pulling the seal diagonally - Dell 3110cn | User Guide - Page 306
4. 5. Remove the orange protective cover of the installed print cartridge and discard. 6. Close the front cover. - Dell 3110cn | User Guide - Page 307
the multipurpose feeder before opening the front cover. Dell fuser are available only through Dell. To order by phone, see your Owner's Manual. Dell recommends Dell fuser for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not - Dell 3110cn | User Guide - Page 308
4. Release the levers at both ends of the fuser. 5. Hold both sides of the installed fuser, pull it towards the front of the printer to release the connection on the right side, then lift upward to remove. - Dell 3110cn | User Guide - Page 309
Installing a New Fuser 1. Unpack a new fuser and hold both sides of the fuser with both hands. 2. With the connector of the fuser toward the slot, push the connector into the slot firmly. NOTE: Make sure that the fuser connector is firmly seated. 3. Lock both levers at the ends of the fuser. - Dell 3110cn | User Guide - Page 310
4. Lower the chute gate to its horizontal position. 5. Close the front cover. - Dell 3110cn | User Guide - Page 311
and follow the safety instructions in your Owner's Manual. Dell separator rollers are available only through Dell. To order by phone, see your Owner's Manual. Dell recommends Dell separator rollers for your printer. Dell does not provide warranty coverage for problems caused by using accessories - Dell 3110cn | User Guide - Page 312
NOTE: Remove all paper from the tray before opening the separator roller cover. 2. Push back the handles on each side of the separator roller cover as shown in the following illustration and open the cover. 3. Turn the separator roller until the roller hook can be seen. - Dell 3110cn | User Guide - Page 313
4. Pull the separator roller hook out of the groove in the axle, and then slide the separator roller to the right. Installing the New Separator Roller in the Tray 1. Align the hole of the new separator roller with the axle. - Dell 3110cn | User Guide - Page 314
2. Slide the separator roller along the axle so the protrusions fit completely into the slots and the roller hook re-seats into the groove on the axle. 3. Close the separator roller cover until both sides click into place. 4. Load paper into the tray and replace it into the printer. - Dell 3110cn | User Guide - Page 315
4. Removing the Used Separator Roller Inside the Printer 1. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and remove it from the printer. 2. Turn the separator roller until the roller hook can be seen. - Dell 3110cn | User Guide - Page 316
the axle, and then slide the separator roller to the left. 4. Repeat steps 2 and 3 to remove the other separator roller from the inside of the printer. - Dell 3110cn | User Guide - Page 317
Installing the New Separator Roller Inside the Printer 1. Align the hole of the new separator roller with the axle. 2. Slide the separator roller along the axle so the protrusions fit completely into the slots and the roller hook re-seats into the groove on the axle. 3. - Dell 3110cn | User Guide - Page 318
more than 5 minutes, print quality may deteriorate. Dell belt units are available only through Dell. To order by phone, see your Owner's Manual. Dell recommends Dell belt units for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components - Dell 3110cn | User Guide - Page 319
unit up as shown in the illustration. CAUTION: Do not touch the inside of the printer. Some parts may be hot. Allow time for the printer to cool before attempting to remove parts in this area. 4. Hold both sides of the . Then, shift the belt unit to the right and remove the unit from the printer. - Dell 3110cn | User Guide - Page 320
Installing a New Belt Unit 1. Unpack a new belt unit. 2. Insert the left peg into the corresponding left side belt unit hole, then align the right peg with the groove, and then push down on the right side of the belt unit to seat into place. 3. Close the belt unit by pulling it down until it clicks. - Dell 3110cn | User Guide - Page 321
4. Remove the film cover from the installed belt unit and discard. 5. Close the front cover. Adjusting Color Registration - Dell 3110cn | User Guide - Page 322
when you first install the printer or after moving it to a new location, follow the procedure below. See "Operator Panel" and "Color Reg Adj" for information about the operator panel. Printing the Color Registration Chart Use the operator panel to print the color registration chart. 1. Press Menu - Dell 3110cn | User Guide - Page 323
chart is printed with the new values. 10. Color registration adjustment is complete when the straightest Y (Yellow), M (Magenta), and C (Cyan) lines are next to the 0 line. CAUTION: After printing the color registration chart, do not turn off the printer until the printer motor has stopped running. - Dell 3110cn | User Guide - Page 324
NOTE: If 0 is not next to the straightest lines, determine the values and adjust the printer again. - Dell 3110cn | User Guide - Page 325
options securely to avoid damage. Removing the Optional 550-Sheet Feeder Removing the Optional Duplexer Removing the Optional Memory Card Removing the Optional Multi Protocol Card Removing the Wireless Printer Adapter Removing the Optional 550-Sheet Feeder NOTE: If you are removing the optional - Dell 3110cn | User Guide - Page 326
the tray module, and place it on a level surface. CAUTION: To lift the printer safely, remove the print cartridges and lift it with two people facing the front and back. Never try to lift the printer while facing its right and left sides. 5. Insert the tray into the printer, and push until it stops. - Dell 3110cn | User Guide - Page 327
Removing the Optional Duplexer NOTICE: Make sure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands on the film of the belt unit may reduce print quality. NOTICE: To protect the drums of the print cartridges against bright light, - Dell 3110cn | User Guide - Page 328
4. Hold the latch of the duplexer as shown in the following illustration and pull out the duplexer from the printer. 5. Close the belt unit by pulling it down. 6. - Dell 3110cn | User Guide - Page 329
6. Close the front cover. Removing the Optional Memory Card 1. Make sure that the printer is turned off and unplug all cables including the power cord from the rear of the printer. 2. Turn the screw on the control board cover gently in a counterclockwise direction and open the cover. - Dell 3110cn | User Guide - Page 330
3. Pull the latches on both edges of the socket outward at the same time to raise the memory card up. 4. Hold the memory card and pull it out. - Dell 3110cn | User Guide - Page 331
the control board cover and turn the screw clockwise. Removing the Optional Multi Protocol Card NOTE: If the optional wireless printer adapter is also installed, it must be removed first. 1. Make sure that the printer is turned off and unplug all cables including the power cord from the rear of the - Dell 3110cn | User Guide - Page 332
3. Remove the two screws from the multipurpose card on the back side of the control board. 4. Hold the multi protocol card and remove it from the control board. 5. Close the control board cover and turn the screw clockwise. - Dell 3110cn | User Guide - Page 333
5. Removing the Wireless Printer Adapter 1. Make sure that the printer is turned off. 2. Turn the screw on the control board cover gently in a counterclockwise direction and open the cover. 3. Remove the wireless printer adapter cap from the control board by releasing the cap's hooks. - Dell 3110cn | User Guide - Page 334
4. Remove the wireless printer adapter from the printer. 5. Attach the plate by tightening the screw on the back side of the printer to cover the wireless printer adapter socket. - Dell 3110cn | User Guide - Page 335
6. Close the control board cover and turn the screw clockwise. - Dell 3110cn | User Guide - Page 336
Compatible with Windows® (Vista, Vista x64, XP, Server 2003, XP x64, Server 2003 x64, 2000, NT 4.0); Mac OS X (10.2.8/10.3.9/10.4.x); Novell 9/10) (English). 1 Dell networked Printers are compatible with Microsoft, Novell and Linux operating systems, but Dell telephone support only supports factory - Dell 3110cn | User Guide - Page 337
PostScript 3, PCL 6, PCL5c OSes Windows Vista/Vista x64/XP/XP x64/Server 2003/Server 2003 x64/2000/NT 4.0, UNIX (Solaris 9/10, HP-UX 11.i), Linux (Red Hat ES 3/4, SuSE 9.2/9.3, TurboLinux 10 Desktop), TurboLinux 10 Desktop), Mac OS X (10.2.8, 10.3.9, 10.4.x) Interfaces Standard local: Standard - Dell 3110cn | User Guide - Page 338
Storage Temperature range -20°C to 40°C (0 °F to 104 °F) Storage humidity range 5% RH to 95% RH (no-condensation) Altitude Operating Up to 3,100 m (10,000 feet) Storage 70.9275 Kpa Chemical Emission Concentration of ozone 0.019 mg/m3 Cables Your interconnection cable must meet the following - Dell 3110cn | User Guide - Page 339
Connection specifications and symbols Connection type 1 Parallel IEEE 1284 2 USB USB2.0 3 Ethernet 10 Base-T/100 Base-TX 4 Wireless IEEE802.11b/802.11g - Dell 3110cn | User Guide - Page 340
files (for Sun/Solaris only), TIFF image files and XWD image files into the PostScript language program. Also, it makes use of the printer features to output in the following manner. Input paper selection Double-sided printing Output paper selection NOTICE: Depending on the configurations of the - Dell 3110cn | User Guide - Page 341
directly to the network. Before Using UX Filter Check the following items before using the UX filter. Before setting up the workstation, set up the printer as follows. 1. Make sure the lpd port is working or not when using the network environment. If the lpd port is not working, set LPD - Dell 3110cn | User Guide - Page 342
Installation The following are required for the installation. Supported operating system is described in "Page-Description (HP-UX) Use sam command for registration of output printer. For more information, see the HP-UX related manual. Files Added by the Installation The following files will be - Dell 3110cn | User Guide - Page 343
Dell3110cn filter description file for Dell™ Color Laser Printer 3110cn postio3110.fd Dellpostio filter description file download3110cn.fd Delldownload filter description file /usr/share/man/man1 txt2ps23110cn.1 Manual page file for txt2ps2 sunras2ps23110cn.1 Manual page file for sunras2ps2 - Dell 3110cn | User Guide - Page 344
xwd2ps23110cn.1 Manual page file for xwd2ps2 NOTE: The directories listed are default directories. Installation Procedure Overview This section provides information on the installation of the UX filter using the UNIX workstation. Linux 1. Setup the printer and network. 2. Insert the drivers and - Dell 3110cn | User Guide - Page 345
script from the drivers and utilities CD. printer model to install. Printer Model? 1. Dell Color Laser Printer 3110cn 2. Exit Enter Process No(1/2)? : 1 5. It asks whether you want to install the filter. Type . Install Filter? (y/n) [y] : y NOTE: If [ ] appears in a message, the default - Dell 3110cn | User Guide - Page 346
: The account files or logging files can be created with the file name specified in the directory path specified. Operation on Solaris Installation/Printer Setting 1. Insert the drivers and utilities CD in the CD-ROM drive of the local workstation. If CD-ROM drive is not mounted on your workstation - Dell 3110cn | User Guide - Page 347
printer model to install. Printer Model ? 1. Dell Color Laser Printer 3110cn 2. Exit Enter Process No (1/2)? : 1 5. The following menu appears. Select and set up the local printer. Solaris Installation for Dell Color Laser Printer 3110cn Type Printer 1. Set Local Printer 2. Set Remote Printer - Dell 3110cn | User Guide - Page 348
printer is a network connection printer. 9. Type the printer name to be registered with the system. Enter printer-name? [dell3110cn] : dell3110cn Printer-name is 'dell3110cn' (y/n)[y] : y 10 Installation Procedure NOTE: The host name of the output printer which you want to specify in step 6 must be - Dell 3110cn | User Guide - Page 349
device file for all workstations. 3. Type ./install.sh and run the installer. # ./install.sh 4. Select the printer model to install. Printer Model ? 1. Dell Color Laser Printer 3110cn 2. Exit Enter Process No (1/2)? : 1 5. Specify the directory to install the utility. Enter install directory name - Dell 3110cn | User Guide - Page 350
system. Delete the filters registered during the installation using the lpfilter command. # lpfilter -f dell3110cn -x (for Dell Color Laser Printer 3110cn) # lpfilter -f download3110 -x # lpfilter -f postio3110cn -x # lpfilter -f posttxt3110cn -x 3. Delete the symbolic files required to call up the - Dell 3110cn | User Guide - Page 351
files. Delete the following files from /etc/lp/fd. Filter description files for various printers. dell3110cn.fd (for Dell™ Color Laser Printer 3110cn) download3110.fd postio3110cn.fd posttxt3110cn.fd HP-UX 1. Delete the printer that was registered with the system. Use the sam command to delete the - Dell 3110cn | User Guide - Page 352
About /usr/local/dellbin3110/.dellpsdefault3110: This is the file for system default settings when using various utilities via /etc/printcap. Hereinafter, it is referred to as the default command option setting file. Method: To define a printer named a4d which prints on A4 with the long-edge binding - Dell 3110cn | User Guide - Page 353
and the lpstat command or how to make use of them, see the related manuals of Solaris. Printing From Solaris To print to the default printer: If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in the following example. % lp filename - Dell 3110cn | User Guide - Page 354
from the nth line. -y font=font Sets the font for printing single-byte alphanumeric characters. If the font specified is not available for the printer, the default fonts are used. NOTE: To specify a font, type the font name as-is after the -y font= option. % lp -y font=Courier-Oblique filename NOTE - Dell 3110cn | User Guide - Page 355
Folio (8.5 x 13 inches). legal Feed paper from the tray loaded with Legal (8.5 x 14 inches). executive Feed paper from the tray loaded with Executive (7.25 x 10.5 inches). monarch Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches). com10 Feed paper from the tray loaded with Envelope - Dell 3110cn | User Guide - Page 356
86 to 14.0 inches If this option is not specified or the tray specified tray is not available, feed paper from the default tray. -y toner_save Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. -y nc=n Specifies the number of output copies (the - Dell 3110cn | User Guide - Page 357
3 C3B Coated Thick Back/Coated 3/Coated Paper 3- Side 2 E Envelope If this option is not specified, multipurpose feeder Paper Type for the printer can be used. -y mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows. le Landscape ler - Dell 3110cn | User Guide - Page 358
) -y po=n Specifies alternate tray. Available alternate trays are as follows. 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to separators. -y sb Specifies Skip Blank Pages. -y cm=mode Specifies output color. Available output colors are as follows. - Dell 3110cn | User Guide - Page 359
-y cc=mode Specifies image types. Available image types are as follows. 0 Off 1 Photo 2 sRGB 3 Standard/ Normal 4 Presentation This option is available only for color printing and when entry data is RGB data. -y gc=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows - Dell 3110cn | User Guide - Page 360
2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -y sc=mode Specifies This option is available only for color printing. -y ct Specifies color transformation. This option is available only for color printing. -y br=mode Specifies brightness - Dell 3110cn | User Guide - Page 361
Bright 5 +4 Bright 4 +3 Bright 3 +2 Bright 2 +1 Bright 1 +0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 -y rgbc=mode Specifies RGB color correction. Available RGB color corrections are as follows. 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for - Dell 3110cn | User Guide - Page 362
-middle:magenta-high:yellowlow:yellow-middle:yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows. +3 Dark 3 +2 Dark 2 +1 Dark 1 0 Normal -1 Light 1 -2 Light 2 -3 Light 3 -Cb Option value must - Dell 3110cn | User Guide - Page 363
Secure Print/Store Print proof Proof Print UserID Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up to 12 single-byte characters from 0x20 to 0x7E, except - Dell 3110cn | User Guide - Page 364
HP-UX) This section provides information on printing from the registered logical printer during the installation. Printing From HP-UX To print to the default printer: If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in the following - Dell 3110cn | User Guide - Page 365
-d dell3110cn filename To change the default printer temporarily for printing: To change the default printer, set the printer name in the environment variable PRINTER. To set a printer named dell3110cn as the default printer for printing, type as follows. % setenv PRINTER dell3110cn % lp filename To - Dell 3110cn | User Guide - Page 366
option when authentication printing is already specified, the filter option has the higher priority over authentication printing. NOTE: If you only specify the password without specifying the user name in the environment variable, the login name is assumed as the user name. NOTICE: If you enter the - Dell 3110cn | User Guide - Page 367
Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password] [filename...] Function Reads and the command line, if no option is specified, the printer will output in 10-point font size in the portrait orientation. At the environmental optional duplexer is installed on the printer. -D - Dell 3110cn | User Guide - Page 368
the longer edge of the pages can be bound. This option is available only when optional duplexer is installed on the printer. -Itray-input Specifies the paper tray. A paper tray can be selected by directly specifying 14 inches). EX Feed paper from the tray loaded with Executive (7.25 x 10.5 inches). - Dell 3110cn | User Guide - Page 369
paper from the tray loaded with Monarch (3.875 x 7.5 inches). COM10 Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches). DL Feed paper from the tray loaded with DL (110 x 220 mm). C5 Feed is not specified or the tray specified is not available, feed paper from the default tray. -t - Dell 3110cn | User Guide - Page 370
Turns on the save toner mode for printing. The print result will be fainter than that of normal . -en Expands horizontal tabs to n columns (space). The default is 8. -ssize Specifies the font size as point size. The default is 10. -E This function turns on the image enhancement function. For models - Dell 3110cn | User Guide - Page 371
The available fonts are limited to the font in the printer. For more information, see "Understanding Fonts." -Nc= , right margin, and left margin are positive real numbers (up to two decimal points). The default is 0. -mg=0:0:0:3 Sets the left margin to 3 inches. -mg=3:3:0:5 Sets the upper margin - Dell 3110cn | User Guide - Page 372
This option is omissible. If this option is omitted, uh is specified as the default value. u User name h Host name t Date and time If the output contents all pages (a option value is necessary because output the top page only is default when PostScript file is converted.) -Hd=dl:th:a NOTICE: If the - Dell 3110cn | User Guide - Page 373
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, the default European font of the printer can be used. If the header/footer output option is specified, the font specification for the header/footer - Dell 3110cn | User Guide - Page 374
PCB JapanesePostcardBack/Japanese Postcard/Japanese Postcard - Side 2 E Envelope If this option is not specified, multipurpose feeder Paper Type of the printer can be used. -Mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows. le - Dell 3110cn | User Guide - Page 375
Landscape (Rotated) se Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are as follows. 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest size (No zoom) 6 - Dell 3110cn | User Guide - Page 376
. Available only when the paper tray for separators is specified. -Sb Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows. c Color (CMYK) k Black -Pr=mode Specifies print mode. Available print modes are as follows. hs High Speed hq High Quality - Dell 3110cn | User Guide - Page 377
RGB data. -Gc=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows. 1.0 1.0 1.4 1.4 1.8 1.8 2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -Sc=mode Specifies screen. Available screens are as follows. 0 Fineness - Dell 3110cn | User Guide - Page 378
guaranteed options are as follows. on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option value are as follows. +5 Bright - Dell 3110cn | User Guide - Page 379
1 +0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 -RGBc=mode Specifies RGB color correction. Available RGB color corrections are as follows. 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for color printing and when entry data is RGB data. -RGBPr=mode - Dell 3110cn | User Guide - Page 380
5000 5000K 6000 6000K 9300 9300K This option is available only for color printing and when entry data is RGB data. -Cb=cyan-low :yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows. +3 Dark 3 +2 Dark - Dell 3110cn | User Guide - Page 381
Secure Print/Store Print proof Proof Print UserID Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up to 12 single-byte characters from 0x20 to 0x7E, except - Dell 3110cn | User Guide - Page 382
-Hld=store:UserID:Password: Store Print -Hld=store:UserID::DocumentName -Hld=store:UserID:: Proof Print -Hld=proof:UserID::DocumentName -Hld=proof:UserID:: NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not be available if you specify it - Dell 3110cn | User Guide - Page 383
the command into the PostScript language program using txt2ps2 and print it to the printer, type as follows: % ls -alF | txt2ps2 | lpr (for Linux) number cannot be output to the PostScript program file which is output by the default option of txt2ps2. Thus, when the output of txt2ps2 is to be taken - Dell 3110cn | User Guide - Page 384
:yellow high:black-low:black-middle:black-high] [Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password] [filename...] Function Reads SunRaster data, converts it to the PostScript can be bound. This option is available only when the optional duplexer is installed on the printer. - Dell 3110cn | User Guide - Page 385
of the paper printed so that the longer edge of the pages can be bound. This option is available only when the optional duplexer is installed on the printer. -Itray-input Specifies the paper tray. A paper tray can be selected by directly specifying a tray or by specifying a paper size. When a paper - Dell 3110cn | User Guide - Page 386
14 inches). EX Feed paper from the tray loaded with Executive (7.25 x 10.5 inches). MO Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches ). COM10 Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches). DL Feed paper from the tray loaded with DL - Dell 3110cn | User Guide - Page 387
or the tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter than that will be executed from the left and bottom of the page. The default is 0.25 inches for both left and bottom. -s=width,height Specifies - Dell 3110cn | User Guide - Page 388
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, default European font of the printer can be used. If header/footer output option is specified, the font specification of header/footer is ignored - Dell 3110cn | User Guide - Page 389
-MSI Specifies multipurpose feeder. -M=type Specifies multipurpose feeder Paper Type. Available multipurpose feeder Paper Types are as follows. B FinePaper/Bond/Plain Paper 2 BB FinePaperBack/Bond/Plain Paper 2 - Side 2 P Stationary/Plain/Plain Paper 1 PB StationaryBack/Plain/Plain Paper 1 - Side 2 - Dell 3110cn | User Guide - Page 390
PCB JapanesePostcardBack/Japanese Postcard/Japanese Postcard - Side 2 E Envelope If this option is not specified, multipurpose feeder Paper Type of the printer can be used. -Mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows. le - Dell 3110cn | User Guide - Page 391
Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are as follows. 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest size (No zoom) 6 Use - Dell 3110cn | User Guide - Page 392
. Available only when the paper tray for separators is specified. -Sb Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows. c Color (CMYK) k Black -Pr=mode Specifies print mode. Available print modes are as follows. hs High speed hq High quality - Dell 3110cn | User Guide - Page 393
=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows. 1.0 1.0 1.4 1.4 1.8 1.8 2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -Sc=mode Specifies screen. Available screens are as follows. 0 Fineness 1 Gradation - Dell 3110cn | User Guide - Page 394
guaranteed options are as follows. on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option value are as follows. +5 Bright - Dell 3110cn | User Guide - Page 395
+0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 -RGBc=mode Specifies RGB color correction. Available RGB color corrections are as follows. 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for color printing and when entry data is RGB data. -RGBPr=mode - Dell 3110cn | User Guide - Page 396
5000K 6000 6000K 9300 9300K This option is available only for color printing and when entry data is RGB data. -Cb=cyan- :yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows. +3 Dark 3 +2 Dark - Dell 3110cn | User Guide - Page 397
Secure Print/Store Print proof Proof Print UserID Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up to 12 single-byte characters from 0x20 to 0x7E, except - Dell 3110cn | User Guide - Page 398
Secure Print only when you directly print data to a printer. Secure Print may not be available if you specify it password is used as authentication password. When neither of job owner name nor password is specified (-Jown=:), login user name is used as job owner name, and authentication password - Dell 3110cn | User Guide - Page 399
program using the sunras2ps2 command and output it to a printer, type as follows. % sunras2ps2 file.rs | lp Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password] [filename...] has multiple images in one file is not supported. tiff2ps2 takes filename as having been created - Dell 3110cn | User Guide - Page 400
of the paper printed so that the shorter edge of the pages can be bound. This option is available only when the optional duplexer is installed on the printer. -D Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and both sides of the - Dell 3110cn | User Guide - Page 401
14 inches). EX Feed paper from the tray loaded with Executive (7.25 x 10.5 inches). MO Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches ). COM10 Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches). DL Feed paper from the tray loaded with DL - Dell 3110cn | User Guide - Page 402
or the tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter than that will be executed from the left and bottom of the page. The default is 0.25 inches for both left and bottom. -s=width,height Specifies - Dell 3110cn | User Guide - Page 403
the paper. format specifies the contents and the order to output. This option is omissible. If this option is omitted, uh is specified as the default value. u User name h Host name t Date and time If the output contents are specified as tuh, it is output as follows. Date and Time User - Dell 3110cn | User Guide - Page 404
and footer. European fonts the same as half size alphanumeric fonts can be specified. Helvetica is specified as default. If the wrong font is specified, default European font of the printer can be used. If header/footer output option is specified, the font specification of header/footer is ignored - Dell 3110cn | User Guide - Page 405
PCB JapanesePostcardBack/Japanese Postcard/Japanese Postcard - Side 2 E Envelope If this option is not specified, multipurpose feeder Paper Type of the printer can be used. -Mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows. le - Dell 3110cn | User Guide - Page 406
Landscape (Rotated) se Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are follows. 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest size (No zoom) 6 - Dell 3110cn | User Guide - Page 407
. Available only when the paper tray for separators is specified. -Sb Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows. c Color (CMYK) k Black -Pr=mode Specifies print mode. Available print modes are as follows. hs High speed hq High quality - Dell 3110cn | User Guide - Page 408
data is RGB data. -Gc=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows. 1.0 1.0 1.4 1.4 1.8 1.8 2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -Sc=mode Specifies screen. Available screens are as follows. - Dell 3110cn | User Guide - Page 409
guaranteed options are as follows. on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option value are as follows. +5 Bright - Dell 3110cn | User Guide - Page 410
1 +0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 -RGBc=mode Specifies RGB color correction. Available RGB color corrections are as follows. 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for color printing and when entry data is RGB data. -RGBPr=mode - Dell 3110cn | User Guide - Page 411
RGB input profile option value are as follows. 0 sRGB 1 AdobeRGB This option is available only for color printing and when entry data is RGB data. -RGBTp=mode Specifies RGB color temperature. Available RGB color temperature option value are as follows. 5000 5000K 6000 6000K 9300 9300K This option is - Dell 3110cn | User Guide - Page 412
Secure Print/Store Print proof Proof Print UserID Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up to 12 single-byte characters from 0x20 to 0x7E, except - Dell 3110cn | User Guide - Page 413
-Hld=store:UserID:Password:DocumentName -Hld=store:UserID:Password: Store Print -Hld=store:UserID::DocumentName -Hld=store:UserID:: Proof Print -Hld=proof:UserID::DocumentName -Hld=proof:UserID:: NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print - Dell 3110cn | User Guide - Page 414
file.tiff > file1.ps To output the TIFF image to a printer, type as follows. % tiff2ps2 file.tiff | lpr (for UserID:Password:DocumentName] [-Jown= jobownername:password] of supported compression formats. The visual class is Static Gray and the pixel is 1 bit. The visual class is Pseudo Color and - Dell 3110cn | User Guide - Page 415
The visual class is True Color and the pixel is 24 bits or 32 bit. The image the shorter edge of the pages can be bound. This option is available only when the optional duplexer is installed on the printer. -D Enables the long-edge binding feature. When it is specified, the printing direction or - Dell 3110cn | User Guide - Page 416
14 inches). EX Feed paper from the tray loaded with Executive (7.25 x 10.5 inches). MO Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches ). COM10 Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches). DL Feed paper from the tray loaded with DL - Dell 3110cn | User Guide - Page 417
or the tray specified is not available, feed paper from the default tray. -t Turns on the save toner mode for printing. The print result will be fainter than that will be executed from the left and bottom of the page. The default is 0.25 inches for both left and bottom. -s=width,height Specifies - Dell 3110cn | User Guide - Page 418
contents and the order to output. This option is omissible. If this option is omitted, uh is specified as the default value. u User name h Host name t Date and time If the output contents are specified as tuh, it as half size alphanumeric fonts can be specified. Helvetica is specified as default. - Dell 3110cn | User Guide - Page 419
If the wrong font is specified, default European font of the printer can be used. If header/footer output option is specified, the font specification of header/footer is ignored. -MSI Specifies multipurpose feeder. -M=type Specifies multipurpose - Dell 3110cn | User Guide - Page 420
PCB JapanesePostcardBack/Japanese Postcard/Japanese Postcard - Side 2 E Envelope If this option is not specified, multipurpose feeder Paper Type of the printer can be used. -Mfo=mode Specifies orientation for multipurpose feeder. Available orientations for multipurpose feeder are as follows. le - Dell 3110cn | User Guide - Page 421
Portrait ser Portrait (Rotated) -Pon Specifies alternate tray. Available alternate trays are as follows. 0 Use printer settings 1 Display message 2 Feed from multipurpose feeder 3 Use nearest size (Adjust to fit) 4 Use larger size (Adjust to fit) 5 Use nearest size (No zoom) 6 Use - Dell 3110cn | User Guide - Page 422
. Available only when the paper tray for separators is specified. -Sb Specifies Skip Blank Pages. -Cm=mode Specifies output color. Available output colors are as follows. c Color (CMYK) k Black -Pr=mode Specifies print mode. Available print modes are as follows. hs High speed hq High quality - Dell 3110cn | User Guide - Page 423
RGB data. -Gc=mode Specifies RGB gamma correction. Available RGB gamma corrections are as follows. 1.0 1.0 1.4 1.4 1.8 1.8 2.2 2.2 2.6 2.6 off Off This option is available only for color printing and when entry data is RGB data. -Sc=mode Specifies screen. Available screens are as follows. 0 Fineness - Dell 3110cn | User Guide - Page 424
guaranteed options are as follows. on On off Off This option is available only for color printing. -Ct Specifies color transformation. This option is available only for color printing. -Br=mode Specifies brightness adjustment. Available brightness adjustment option value are as follows. +5 Bright - Dell 3110cn | User Guide - Page 425
1 +0 Normal -1 Dark 1 -2 Dark 2 -3 Dark 3 -4 Dark 4 -5 Dark 5 -RGBc=mode Specifies RGB color correction. Available RGB color corrections are as follows. 10 Perceptual 11 Saturation 12 RelativeC 13 AbsoluteC This option is available only for color printing and when entry data is RGB data. -RGBPr=mode - Dell 3110cn | User Guide - Page 426
5000 5000K 6000 6000K 9300 9300K This option is available only for color printing and when entry data is RGB data. -Cb=cyan-low :yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. Available adjustment values are as follows. +3 Dark 3 +2 Dark - Dell 3110cn | User Guide - Page 427
Secure Print/Store Print proof Proof Print UserID Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon). Password Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters). DocumentName Up to 12 single-byte characters from 0x20 to 0x7E, except - Dell 3110cn | User Guide - Page 428
-Hld=store:UserID:Password: Store Print -Hld=store:UserID::DocumentName -Hld=store:UserID:: Proof Print -Hld=proof:UserID::DocumentName -Hld=proof:UserID:: NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not be available if you specify it - Dell 3110cn | User Guide - Page 429
image into the PostScript language program and output it to a file, type as follows. % xwd2ps2 file.xwd > file.ps To output the XWD image to a printer, type as follows. % xwd2ps2 file.xwd | lpr (for Linux) % xwd2ps2 file.xwd | lp (for Solaris/HP-UX) Important When -s and -S are specified at the same - Dell 3110cn | User Guide - Page 430
be bound. This option is available only when the optional duplexer is installed on the printer. -D Enables the long-edge binding feature. When it is on the printer. -Itray-input Specifies the paper tray. The parameters to be able to specify are the same as txt2ps2. -t Turns on the save toner mode - Dell 3110cn | User Guide - Page 431
. If this option is not specified, multipurpose feeder Paper Type of the printer can be used. -Mfo=mode Specifies orientation for multipurpose feeder. -Pon Specifies . -Sb Specifies Skip Blank Pages. -Cm=mode Specifies output color. -Pr=mode Specifies print mode. -Cc=mode Specifies image types. - Dell 3110cn | User Guide - Page 432
-high:magenta-low:magenta-middle:magenta-high:yellow-low;yellowmiddle:yellow high:black-low:black-middle:black-high Specifies adjustment value for color balance of each color/density. -Cb Option value must be specified in the following order: Cyan low density, Cyan medium density, Cyan high density - Dell 3110cn | User Guide - Page 433
. Precautions and Limitations During Installation Pay attention to the following points during the installation. Solaris Use lpadmin command to register the default printer. # lpadmin -d PrinterName To inhibit the banner sheets output, change the value of nobanner=no to nobanner=yes that includes in - Dell 3110cn | User Guide - Page 434
printer, use sam command and so on. See the HP-UX related manual for details. To install UX filter into the default directory (/usr/local/dellbin3110), it's necessary to create /usr/local directory in advance. Linux To install UX filter into the default directory (/usr/local/dellbin3110), it's - Dell 3110cn | User Guide - Page 435
set against the printable area for paper allowed by the printer. Use the -ps option only when a PostScript supported. Using xwd2ps2 (Linux/Solaris/ HP-UX) There are three types of supported compression formats. The visual class is Static Gray and the pixel is 1 bit. The visual class is Pseudo Color - Dell 3110cn | User Guide - Page 436
the lp command after the conversion. % xwd2ps2 file.xwd | lp The double- sided printing (Linux/ Solaris/ HP- UX) The printer without an optional duplexer is unable to do double- sided printing. Header/footer Option (-Hd=position:format:page, -Hfheaderfont) (txt2ps2,sunras2ps2,tiff2ps2,xwd2ps2) If - Dell 3110cn | User Guide - Page 437
number of columns specified are ignored. Also, it is impossible to specify landscape and 2-column. In case of the PostScript file, it happens that the printer doesn't output all pages despite that output all page is specified. In such a case, specify print the only top page. It's impossible to use - Dell 3110cn | User Guide - Page 438
Specify the default queue. 4. Specify the printing options. Installing the Printer Driver 1. Double-click Dell-Color-Laser-3110cn-x.x-x.noarch.rpm in the Drivers and Utilities CD. 2. Type the administrator's password. 3. Click Continue in the Completed System Preparation window. Installation starts - Dell 3110cn | User Guide - Page 439
IP address in Device URI. Format: lpd://xxx.xxx.xxx.xxx (printer's IP address) 8. Select Dell from the Make menu, and then click Continue. 9. Select Dell™ Color Laser 3110cn... from the Model menu, and then click Continue. The message Printer xxx has been added successfully. appears. The set up is - Dell 3110cn | User Guide - Page 440
command in the terminal window. su (Type the administrator's password) rpm -e Dell-Color-Laser-3110cn The printer driver is uninstalled. Operation on SUSE 9.2/9.3 Installing the Printer Driver 1. Double-click Dell-Color-Laser-3110cn-x.x-x.noarch.rpm in the Drivers and Utilities CD. 2. Click - Dell 3110cn | User Guide - Page 441
of Printer and Location of Printer do not have to be specified. e. Select the Do Local Filtering check box, and then click Next. f. Select DELL in Select manufacturer. Select Color Laser 3110cn in However, sometimes you can only print from the default queue depending on the application program (for - Dell 3110cn | User Guide - Page 442
:631/admin in Location, and then press the key. 3. Type root as the user name, and type the administrator's password. The CUPS window appears. NOTE: Set the password for authority as the printer administrator before setting the printer queue. If you have not set it, go to "Setting the - Dell 3110cn | User Guide - Page 443
as the printer administrator after the Enter password again prompt.) Uninstalling the Printer Driver 1. Select Start Applications System Terminal Konsole. 2. Type the following command on the terminal window. su (Type the administrator's password) rpm -e Dell-Color-Laser-3110cn The printer driver is - Dell 3110cn | User Guide - Page 444
instructions in your Owner's Manual prior to setting up and operating your printer. Regulatory Information Federal Communications Commission (FCC) Compliance Information Statement (US Only) The Dell™ Color Laser Printer 3110cn point of purchase or service representative for additional suggestions. - Dell 3110cn | User Guide - Page 445
is provided on the device or devices covered in this document in compliance with FCC regulations: Model number: Dell™ Color Laser Printer 3110cn Company name: Dell Inc. One Dell Way Round Rock, Texas 78682 USA 512-338-4400 Industry Canada Compliance Statement This Class B digital apparatus meets - Dell 3110cn | User Guide - Page 446
B domestic environment. A Declaration of Conformity in accordance with the preceding directives and standards has been made and is on file at Dell Inc. Products Europe BV, Limerick, Ireland. CE Mark Notice This equipment complies with the essential requirements of the European Union Directive 1999 - Dell 3110cn | User Guide - Page 447
2620 - 11° Piso Col. Lomas Altas 11950 México, D.F. Enviar a: Dell Computer de México, S.A. de C.V. al Cuidado de Kuehne & Nagel de México S. de R.L. Avenida Soles No. 55 Col. Peñon de los Baños 15520 México, D.F. Número del modelo: Dell Laser Printer 5100cn Tensión de alimentación: 110-127 VAC - Dell 3110cn | User Guide - Page 448
are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition. Energy Star ENERGY STAR® Compliance Certain configurations of Dell printers comply with the requirements set forth by the Environmental - Dell 3110cn | User Guide - Page 449
is not in use for extended periods of time, particularly at night and on weekends. MSDS Materials for Dell Printer All MSDS materials for Dell Printers can be found at the following URL: http://www1.us.dell.com/content/topics/global.aspx/corp/environment/en/prod_design? c=us&l=en&s=corp&~section=001 - Dell 3110cn | User Guide - Page 450
customer in the troubleshooting process and provides for restoration of the operating system, software program and hardware drivers to the original default configuration as shipped from Dell, as well as the verification of appropriate functionality of the printer and all Dell-installed hardware. In - Dell 3110cn | User Guide - Page 451
Service Warranty and Return Policy Dell Computer Corporation ("Dell") manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry-standard practices. For information about the Dell warranty for your printer, see the Owner's Manual
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
-
428
-
429
-
430
-
431
-
432
-
433
-
434
-
435
-
436
-
437
-
438
-
439
-
440
-
441
-
442
-
443
-
444
-
445
-
446
-
447
-
448
-
449
-
450
-
451
 |
 |
Dell™ Color Laser Printer 3110cn User's Guide
Notes, Notices, and Cautions
Click the links to the left for information on the features, options, and operation of your printer. For
information on other documentation included with your printer, see "
Finding Information
."