Dell 8 Fabric OS Documentation Updates
Dell 8 Manual
 |
View all Dell 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell 8 manual content summary:
- Dell 8 | Fabric OS Documentation Updates - Page 1
5533--11000022006633--0033 ® 17 December 2010 Fabric OS Documentation Updates Supporting Fabric OS v6.4.1 - Dell 8 | Fabric OS Documentation Updates - Page 2
service names mentioned are or may be trademarks or service marks of their respective owners. Notice: This document The product described by this document may contain "open source" ://www.brocade.com/support/oscd. Brocade Communications document Added update for the Fabric OS Administrator's Guide. - Dell 8 | Fabric OS Documentation Updates - Page 3
Contents About This Document In this chapter v How this document is organized v Document feedback vi Chapter 1 Access Gateway Administrator's Guide In this chapter 1 Chapter 3, Managing Policies and Features in Access Gateway Mode1 Chapter 2 Fabric OS Administrator's Guide In this chapter - Dell 8 | Fabric OS Documentation Updates - Page 4
Chapter 6 Chapter 7 DCX Backbone Hardware Reference Manual In this chapter 17 Appendix D, Port Numbering Template 17 Brocade 5100 Hardware Reference Manual In this chapter 19 Chapter 3, Brocade 5100 Operation 19 iv Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 5
OS Message Reference Fabric OS Troubleshooting and Diagnostics Guide Fabric Watch Administrator's Guide FICON Administrator's Guide iSCSI Administrator's Guide Web Tools Administrator's Guide DCX Backbone Hardware Reference Manual Brocade 5100 Hardware Reference Manual Page Number Updates on page - Dell 8 | Fabric OS Documentation Updates - Page 6
or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number of the document and as much detail as possible about your comment, including the topic heading and page number and your suggestions - Dell 8 | Fabric OS Documentation Updates - Page 7
this chapter are for the Access Gateway Administrator's Guide, part number: 53-10001760-01, published March 2010 supported for HBAs connected to switches running in Access Gateway mode. This feature is only be supported for HBAs connected to switches running in Native mode. Fabric OS Documentation - Dell 8 | Fabric OS Documentation Updates - Page 8
1 Chapter 3, Managing Policies and Features in Access Gateway Mode 2 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 9
are for the Fabric OS Administrator's Guide, part number: 53-1001763-02, Chapter 21, Using the FC-FC Routing Service 4 Chapter 14, Interoperability for Merged SANs License Trunking on an HBA Server Application Optimization and ISL supported. Fabric OS Documentation Updates 3 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 10
the following step: 6. Delete fabric mode Top Talker monitors, if they are configured. FC-FC routing and fabric mode Top Talker monitors are not concurrently supported. See "Deleting the fabric mode Top Talker monitors" on page 396 for instructions. 4 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 11
types 12 New commands in Fabric OS v6.4.1 Add the following new commands to the Fabric OS Command Reference for Fabric OS v6.4.0. Fabric OS Documentation Updates 5 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 12
Bottleneck detection, and Port Fencing. You must power off the slot before changing the buffer optimized mode. supported only on the Brocade FC8-16, FC8-32, and FC8-48 blades in a DCX or DCX-4S chassis. This command is not supported on CP and core blades On 6 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 13
bufopmode --set 11 The operation is not supported when the slot is online switch:admin> bufopmode --reset 12 The operation is not supported when the slot is online switch:admin> 12: buffer optimized mode - Off slotShow, slotPowerOn, slotPowerOff Fabric OS Documentation Updates 7 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 14
configuration is stored in nonvolatile memory and is persistent across switch reboots or power cycle. Use the portCfgShow command of the port to be configured, relative to its slot for bladed systems. Use switchShow for a listing of valid ports. mode Specifies Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 15
ON ON ON ON ON ON ON ON ON Fport Buffers Port Auto Disable Fault Delay 0001 0000 0000 0000 (output truncated) portCfgShow Fabric OS Documentation Updates 9 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 16
Zoning Operation parameters (yes, y, no, n): [no] RSCN Transmission Mode (yes, y, no, n): [no] Arbitrated Loop parameters (yes, y, no, n): [no] System services (yes, y, no, n): [no] Portlog events enable (yes, y, no, n): [no] ssl attributes (yes, y, no, n): [no] rpcd attributes (yes, y, no, n): [no - Dell 8 | Fabric OS Documentation Updates - Page 17
... Fabric parameters (yes, y, no, n): [no] yes Configure edge hold time (yes, y, no, n): [no] yes Edge hold time: (100..500) [220] System services (yes, y, no, n): [no] ssl attributes (yes, y, no, n): [no] rpcd attributes (yes, y, no, n): [no] webtools attributes (yes, y, no, n): [no] System (yes - Dell 8 | Fabric OS Documentation Updates - Page 18
Admin Context Switch Type bufOpMode O OM OM OM O OM OM O SwitchMember VF All portCfgFaultDelay O OM OM OM O OM OM O PortMember VF All 12 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 19
Chapter Fabric OS Message Reference Manual 4 In this chapter The updates in this chapter are for the Fabric OS Message Reference, part number: 53 severity level for the message SULB-1037. • "Severity - INFO" to be changed to "Severity - ERROR" Fabric OS Documentation Updates 13 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 20
4 SULB System Messages 14 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 21
to the following sections in the Fabric OS MIB Reference Guide, part number: 53-1001768-01: • "Understanding power supply is below threshold, Fabric Watch sends a warning SNMP trap. • The severity of a Fabric Watch SNMP trap for CPU and memory will always be informational. Fabric OS Documentation - Dell 8 | Fabric OS Documentation Updates - Page 22
Above action BUFFER Below low threshold Low action Chapter 4, Fabric Watch Activation On page 30 "snmpConfig -set" should appear as "snmpConfig --set". 16 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 23
are for the DCX Backbone Hardware Reference Manual, part number: 53-10000685-12, published blade on page 134, the table under the illustration should read as follows. 1 Blade Power LED 2 Blade Status LED 3 FC ports 24-47 (bottom to top) 4 FC ports 0-23 (bottom to top) Fabric OS Documentation - Dell 8 | Fabric OS Documentation Updates - Page 24
6 Appendix D, Port Numbering Template 18 Fabric OS Documentation Updates 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 25
by a user. • The FRU power switch has been turned off or the unit has been unplugged. Take one of the following actions: • Replace the FRU. • Verify that the power supply/fan assembly FRU has been enabled. • Check the power switch and plug. Fabric OS Documentation Updates 19 53-1002063-03 - Dell 8 | Fabric OS Documentation Updates - Page 26
flashing in half-second intervals) Port is faulty. Check the management interface and the error log for details on the cause of status. Contact Technical Support if required. Steady amber (for Port is receiving light or signal carrier No action required. more than five at 4 Gbps; but is not yet
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
 |
 |
53-1002063-03
17 December 2010
®
53-1002063-03
Fabric OS
Documentation Updates
Supporting Fabric OS v6.4.1