Dell Brocade 300 Fabric OS MIB Reference v7.1.0
Dell Brocade 300 Manual
 |
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Brocade 300 manual content summary:
- Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 1
53-1002750-01 ® 14 December 2012 Fabric OS MIB Reference Supporting Fabric OS v7.1.0 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 2
informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 3
January 2006 Changed name, updated to support Fabric OS v5.2.x. September 2006 New branding, updated to support Fabric OS v5.3.0. June 2007 Updated to support the Brocade DCX Data Center Backbone Director. October 2007 Updated to support the Brocade 300, 5100, and 5300 switches. March 2008 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 4
Document Title Fabric OS MIB Reference Fabric OS MIB Reference Publication Number Summary of Changes Publication Date 53-1002151-01 53-1002750-01 Updated to support Brocade 6510, Brocade DCX 8510-8 Backbone, and Brocade DCX 8510-4 Backbone. Added FibreAlliance extension MIB, SNMPv2 MIB, - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 5
MIBs 19 Firmware upgrades and enabled traps 20 Fabric OS commands for configuring SNMP 20 Support for Administrative Domains 23 Support for Role-Based Access Control 23 Support for IPv6 addressing 23 Support for Virtual Fabric 23 Customized traps 24 Fabric OS MIB Reference v 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 6
Interfaces group 34 AT group 38 IP group 38 ICMP group 43 TCP FIBRE-CHANNEL-FE-MIB (MIB-II branch 70 FIBRE-CHANNEL-FE-MIB organization 71 Definitions for FIBRE-CHANNEL-FE-MIB 74 fcFeConfig group 77 fcFeStatus group 80 fcFeError group 83 fcFeAccounting group 84 vi Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 7
Chapter 6 Fabric OS MIB Reference 53-1002750 Switch system group 141 Switch Fabric group 149 Switch agent configuration group 151 Fibre Channel port group 152 Name Server database group 156 Event group 158 Fabric Watch group 159 End device group 168 Switch group 169 Bloom performance monitor - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 8
usage group 174 Switch connectivity unit port statistics extension Connectivity unit group 204 Statistics group 225 Service Port configuration table for Fabric Assigned PWWN feature . . . . .239 Port configuration table for encryption or compression feature . .240 viii Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 9
Chapter 15 Chapter 16 Switch connectivity unit port table 241 FCIP MIB Objects FCIP MIB overview 243 FCIP MIB system organization of MIB objects 243 FCIP entity instance table 245 FCIP link table 246 FCIP TCP connection table 247 FCIP extended link table 247 FCIP connection statistics table - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 10
IEEE 802.3 LAG MIB Objects IEEE 802.3 LAG MIB overview 303 Aggregator group 305 Aggregator port group 307 Bridge-MIB Objects Bridge-MIB overview 313 Bridge-MIB 317 Bridge-MIB traps overview 335 BD Traps 336 BD configuration 337 BD statistics 337 x Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 11
340 ISL variables 340 End Device variables 340 SNMP configuration variables 340 iSCSI instance information variables 341 Mapping of CLI Counters to MIB Objects portStatsShow command 343 portErrShow command 344 portStats64Show command 345 portShow command 346 Fabric OS MIB Reference xi - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 12
xii Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 13
for Entity MIB object types. • Chapter 6, "SW-MIB Objects," provides information for FC Switch MIB (SW-MIB) object types. • Chapter 7, "High-Availability MIB Objects," provides Chapter 14, "USM MIB Objects," provides information on USM MIB object types. Fabric OS MIB Reference xiii 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 14
for Fabric OS vx.x.x, documenting all possible configurations and scenarios is beyond the scope of this document. This document supports Brocade Fabric OS version 7.1.0 and earlier versions, and all switches supporting these Fabric OS versions, including: • Brocade 300 • Brocade 4100 • Brocade 4900 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 15
Supported hardware and software • Brocade 8000 FCoE Switch • Brocade Encryption Switch • Brocade DCX Backbone and Brocade DCX-4S Backbone - FA4-18 Fibre Channel application blade - FCOE10-24 DCX Blade - FS8-18 Encryption Blade - FC8-16 port blade - FC8-32 port blade - FC8-48 port blade - FC8-64 port - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 16
swFwBehaviorType swFwBehaviorInt swFwLastSeverityLevel swFCportspeed - Change of version number wherever applicable For further information about new features and documentation updates for this release, refer to the release notes. xvi Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 17
keywords and operands Identifies text to enter at the GUI or CLI Provides emphasis Identifies variables Identifies paths and Internet addresses Identifies document titles code text Identifies CLI output Identifies syntax examples For readability, command names in the narrative portions of this - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 18
additional resource information, visit the Technical Committee T11 website. This website provides interface standards for high-performance and mass storage applications for Fibre Channel, storage management, and other applications: http://www.t11.org xviii Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 19
next to the power supply bays • Brocade DCX and 8510-8-On the bottom right on the port side of the chassis • Brocade DCX-4S and 8510-4-On the bottom right on the port side of the chassis, directly above the cable management comb 3. World Wide Name (WWN) Fabric OS MIB Reference xix 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 20
, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number and as much detail as possible about your comment, including the topic heading and page number and your suggestions for improvement. xx Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 21
Gateway and Brocade MIBs 19 •Firmware upgrades and enabled traps 20 •Fabric OS commands for configuring SNMP 20 •Support for Administrative Domains 23 •Support for Role-Based Access Control 23 •Support for IPv6 addressing 23 •Support for Virtual Fabric 23 •Customized traps 24 Setting the - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 22
query The management station can also receive traps, unsolicited messages from the switch agent if an unusual event occurs (Figure 3). For more information, refer to "Understanding SNMP traps" on page 4. Management Station TRAP Agent FIGURE 3 SNMP trap 2 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 23
management stations. Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch the portions relevant to configuring SNMP on a Brocade switch are referenced in the remainder of this reference. iso (1) org (3) - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 24
called a trap. Brocade switches send traps out on UDP port 162 and to any configured port. In order to receive traps, the management station IP address and severity level must be configured on the switch. Up to six trap recipients can be configured using Web Tools or the snmpConfig command. You can - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 25
. Events in the Error Log of a severity at or above the configured threshold will generate SNMP traps. The Fibre Alliance Trap (FA-TRAP) can be configured to send traps using the snmpConfig command. For more information on this command, refer to the Fabric OS Command Reference. HA traps Consider - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 26
are fourteen specific traps defined in Brocade SW-TRAP. 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to the system error log. The desired severity - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 27
information on this command, refer to Table 6 or the Fabric OS Command Reference. Object instances MIB objects are defined by the OID, which is the type of object, and by the instance number, which is an instance of that MIB object. A Fibre Channel port is a MIB object, and port 0 is an instance - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 28
of SNMP for your Fabric OS version (Table 3). TABLE 3 Firmware Fabric OS-supported SNMP versions SNMPv1 SNMPv2 SNMPv3 Fabric OS v5.x Yes Yes1 Yes2 Fabric OS v6.0.0 Yes Yes Yes Fabric OS v6.1.0 Yes Yes Yes Fabric OS v6.2.0 Yes Yes Yes 8 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 29
3 Firmware Fabric OS-supported SNMP versions (Continued) SNMPv1 SNMPv2 SNMPv3 Fabric OS v6.1.2_CEE Yes No Yes Fabric OS v6.3.0 Yes No Yes Fabric OS v6.4.0 Yes No Yes Fabric OS v6.4.1_fcoe Yes No Yes Fabric OS v7.0.0 Yes No Yes Fabric OS v7.0.1 Yes No Yes Fabric OS v7 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 30
MIB P-BRIDEGE MIB Q-BRIDEGE MIB INET-Address - MIB BRCDFCIP.mib IEEE 802.1 PAE MIB RSTP-MIB Legend Standard MIB File Dependency Module name Brocade MIB Module name FOS supported FIGURE 5 Brocade SNMP MIB dependencies and advised installation order 10 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 31
and now uses the connUnitPortStatTable for port statistics. All versions of Fabric OS support SNMPv1. Fabric OS v5.0.1 supports the SNMPv3-USM (snmpUsmMIB) MIB. Fabric OS v5.3.0 supports the FCIP MIB and ifXtable. SNMP CLI usage The examples for configuring SNMPv3 users/traps are listed in - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 32
Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Committing configuration.....done. switch snmpuser3 Auth Protocol: noAuth 12 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 33
] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] SNMPv3 trap recipient configuration: Trap Recipient's IP address : [0.0.0.0] 172.26.4.102 UserIndex: (1..6) [1] Fabric OS MIB Reference 13 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 34
Severity level : (0..5) [0] 5 Trap recipient Port : (0..65535) [162] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Committing configuration.....done. DCX_128:FID128:admin> switch:admin> snmpconfig --show snmpv3 SNMP Informs - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 35
Loading Brocade MIBs 1 switch:root> snmpTraps --show # |Mib Name |Supported Traps 001|SW-MIB |sw-track-changes-trap | |sw-fabric-watch-trap | |sw-fc-port-scn | |ip-v6-change-trap | |sw-pmgr-event-trap | |sw-event-trap | |sw-fabric-reconfig-trap | |sw-fabric-reconfig-trap | - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 36
NO swIPv6ChangeTrap: NO swPmgrEventTrap: NO swFabricReconfigTrap: NO swFabricSegmentTrap: NO swExtTrap: NO [...] To enable the SW-MIB MIB only without changing the current trap configuration: switch:admin> snmpconfig --enable mibCapability -mib_name SW-MIB 16 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 37
traps: switch:admin> snmpconfig --show mibcapability FE-MIB: YES SW-MIB: YES FA-MIB: YES FICON-MIB: YES HA-MIB: YES FCIP-MIB: YES ISCSI-MIB: YES IF-MIB: YES BD-MIB: YES SW-TRAP: YES swFault: YES swSensorScn: YES swFCPortScn: YES swEventTrap: YES DesiredSeverity:None Fabric OS MIB Reference 17 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 38
--set systemgroup Example of systemGroup configuration (default) switch:admin> snmpconfig --default systemGroup ***** This command will reset the agent's system group configuration back to factory default ***** sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 39
security DCX_128:FID128:admin 4. In the Manager (SNMP Browser), create a user snmpadmin1 with Authentication protocol as noAuth, Privacy protocol as noPriv, set the password and set the trap port as 162. (Same values are set as in the switch SNMPv3 configuration.) NOTE SNMPv3 supports AES128 and DES - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 40
switches, refer to the Fabric OS Administrator's Guide. TABLE 5 Commands for configuring SNMP Command Description snmpConfig snmpTraps This command has all the features of the existing agtcfg* commands; in addition, it has SNMPv3 configuration parameters. Enhanced in Fabric OS v6.3.0 to support - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 41
and password, the privacy protocol and password, the SNMPv3 trap recipient's IP address, its associated user index and trap severity level. When "0" is configured as a trap port, traps can be received at the default port 162. In Fabric OS v6.3.0 and later, the --set snmpv3 command supports an - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 42
[-mib_name [ -bitmask ]] --set mibCapability Configures MIBs interactively. When used without a MIB name, this command displays a menu with supported MIBs and associated traps, and for each MIB or trap, you are prompted to confirm or change the default by specifying yes or no - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 43
AD may contain switches, devices, and ports. An AD may also limit access to a configured set of users. Support for Role-Based Access Control Role-Based Access Control (RBAC) is supported in Fabric OS v5.3.0 and later releases. RBAC applies a fixed set of roles that address the access control needs - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 44
OID in trap OID to customized trap OID on different platforms. For example, Fabric Watch customized trap OID is 1.3.6.1.4.1.1588.2.1.1.62.0.5 on DCX and 1.3.6.1.4.1.1588.2.1.1.71.0.5 on Brocade 5100. This feature is not supported from FOS 7.1.0 release. 24 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 45
•System group 32 •Interfaces group 34 •AT group 38 •IP group 38 •ICMP group 43 •TCP group 45 •UDP group refer to Brocade-specific information and are provided by Brocade. MIB-II object hierarchy Figure 6 through Figure 16 depict the organization and structure of MIB-II. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 46
iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - rmon - iFMIB FIGURE 6 MIB-II - sysLocation 1.3.6.1.2.1.1.6 - sysServices 1.3.6.1.2.1.1.7 FIGURE 7 System hierarchy 26 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 47
- ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 - ifOutOctets 1.3.6.1.2.1.2.2.1.16 - ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 - ifOutNUcastPkts atIfIndex 1.3.6.1.2.1.3.1.1.1 - atPhysAddress 1.3.6.1.2.1.3.1.1.2 - atNetAddress 1.3.6.1.2.1.3.1.1.3 FIGURE 9 AT hierarchy Fabric OS MIB Reference 27 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 48
2 MIB II overview - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL - ipReasmOKs 1.3.6.1.2.1.4.15 - ipReasmFails 1.3.6.1.2.1.4.16 - ipFragOKs 1.3.6.1.2.1.4.17 - ipFragFails 1.3.6.1.2.1.4. 34.1.2 - ipAddressIfIndex 1.3.6.1.2.1.4.34.1.3 28 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 49
- ipAddressStorageType 1.3.6.1.2.1.4.34.1.11 IP hierarchy - icmp (1.3.6.1.2.1.5) 15 - icmpOutDestUnreachs 1.3.6.1.2.1.5.16 - icmpOutTimeExcds 1.3.6.1.2.1.5.17 24 - icmpOutAddrMasks 1.3.6.1.2.1.5.25 - icmpOutAddrMaskReps 1.3.6.1.2.1.5.26 FIGURE 11 ICMP hierarchy Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 50
- udpInDatagrams 1.3.6.1.2.1.7.1 - udpNoPorts 1.3.6.1.2.1.7.2 - udpInErrors 1.3.6.1.2.1.7.3 - udpOutDatagrams 1.3.6.1.2.1.7.4 - udpTable 1.3.6.1.2.1.7.5 - udpEntry 1.3.6.1.2.1.7.5.1 - udpLocalAddress 1.3.6.1.2.1.7.5.1.1 - EGP group FIGURE 13 UDP hierarchy 30 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 51
1.3.6.1.2.1.11.23 is not supported. - snmpInTooBigs 1.3.6.1.2.1.11 .15 - snmpInGetNexts 1.3.6.1.2.1.11.16 - snmpInSetRequests 1.3.6.1.2.1.11.17 group - snmpOutGenErrs 1.3.6.1.2.1.11.24 - snmpOutGetRequests 1.3.6.1.2.1.11.25 11.32 FIGURE 15 SNMP hierarchy Fabric OS MIB Reference 31 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 52
31.1.1.1.15 - ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 - ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17 - must implement the System group. If an agent is not configured to have a value for any of the System group variables, a string of length 0 is returned. 32 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 53
value using the snmpconfig command. An administratively assigned name for this managed node. By convention, this is the node's fully qualified domain name. The default is the preassigned name of the logical switch. Set this value using the snmpconfig command. Fabric OS MIB Reference 33 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 54
all systems. FCIP tunnel support is added in Fabric OS 5.3.0 and later. To support FCIP tunneling, entries are created in the ifTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). Logical Inter-Switch Link (LISL) is an FC interface. TABLE 9 Object and - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 55
Port name (if set), otherwise, FC port The type of interface, designated by the physical link protocols immediately below the network layer in the protocol stack. • For WAN interface, FCIP Link - ethernetCsmacd (6) • For transport interface - FCIPLink (224) • For FC ports - Fibre Channel - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 56
that no operational packets can be passed. This object is read-only in Fabric OS v4.x and later versions. This object should return same value with ifOperStatus for WAN and FC ports interfaces. ifOperStatus 1.3.6.1.2.1.2.2.1.8 Read only The current operational state of the interface. Valid values - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 57
must be set to the Object Identifier 0 0, which is a syntactically valid object identifier, and any conferment implementation of ASN.1 and BER must be able to generate and recognize this value. • eth0 returns null OID • lo returns null OID • fc0 returns null OID Fabric OS MIB Reference 37 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 58
time-to-live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol. Read only The total number of input datagrams received from interfaces, including those received in error. 38 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 59
discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on. The number of input datagrams discarded because the IP address in their IP header's destination - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 60
mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0. ipAdEntBcastAddr 1.3.6.1.2.1.4.20 the same interface identified by the same value of ifIndex. 40 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 61
set to -1. ipRouteNextHop 1.3.6.1.2.1.4.21.1.7 Read-write The IP address of updated or otherwise determined to be correct. Older semantics cannot be implied except through knowledge of the routing protocol by which the route was learned. NOTE: This object is not supported. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 62
are valid. One possible reason for discarding such an entry could be to free buffer space for other routing entries. NOTE: This object is not supported. 42 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 63
(3) In the absence of other information, for an IPv4 address, the status is always preferred (1). ipAddressCreated 1.3.6.1.2.1.4.34.1.8 Read updated. If this entry was updated prior to the last re-initialization of the local network management subsystem Fabric OS MIB Reference 43 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 64
of error that contribute to this counter's value. The number of ICMP Destination Unreachable messages sent. The number of ICMP Time Exceeded messages sent. The number of ICMP Parameter Problem messages sent. The number of ICMP Source Quench messages sent. 44 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 65
number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. Fabric OS MIB Reference 45 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 66
. A table containing TCP connection-specific information. Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. 46 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 67
: Fabric OS v3.1.x and v4.x do not allow the SET operation on this variable. The local IP address for this TCP connection. In the case of a connection in the listen state that is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used. The local port - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 68
Read only The local IP address for this UDP listener. In the case of a UDP listener that is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used. Read only The local port number for this UDP listener. EGP group Brocade does not support the EGP group - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 69
11.16 service. The total number of SNMP messages that were delivered to the SNMP protocol entity and were for an unsupported SNMP version SNMP protocol entity and for which the value of the error-status field is "genErr." The total number of MIB Fabric OS MIB Reference 49 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 70
24 for which the value of the error-status field is too large. entity. The total number of SNMP Set-Request PDUs that have been generated by this object overrides any configuration information; as such, switch. This value can be changed with the snmpconfig command Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 71
group is implemented in Fabric OS v5.3.0 and later versions to support FCIP tunnels. There are entries in the ifXTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). The ifXtable is used to support 64-bit FC statistics counters. TABLE 16 Object and OID - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 72
were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. 52 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 73
reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets or frames by the interface. Hard-coded to false. Set to true when media is connected, otherwise false. For virtual FC ports, it is always false. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 74
trap signifies that the sending protocol entity is re-initializing itself such that neither the agent configuration nor the protocol entity implementation is altered. This trap is generated for the following switch events: • firmwaredownload • hafailover 54 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 75
emission of such traps through an implementation-specific mechanism. This trap is generated when you perform GET or SET with invalid community strings (snmpv1). NOTE: authTraps must be enabled in the switch with the command: snmpconfig -set systemgroup. Fabric OS MIB Reference 55 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 76
2 Generic traps 56 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 77
provided by Brocade. RMON MIB object hierarchy Figure 17 through Figure 22 depict the organization and structure of RMON MIB. - iso - org - dod - internet - directory - mgmt - mib-2 - rmon - statistics - history - alarm - event FIGURE 17 RMON MIB overall hierarchy Fabric OS MIB Reference 57 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 78
1.3.6.1.2.1.16.2.2.1.11 - etherHistoryFragments 1.3.6.1.2.1.16.2.2.1.12 - etherHistoryJabbers 1.3.6.1.2.1.16.2.2.1.13 - etherHistoryCollisions 1.3.6.1.2.1.16.2.2.1.14 - etherHistoryUtilization 1.3.6.1.2.1.16.2.2.1.15 FIGURE 19 History hierarchy 58 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 79
logDescription 1.3.6.1.2.1.16.9.2.1.4 FIGURE 21 Event hierarchy - rmonEventsV2 1.3.6.1.2.1.16.0 - risingAlarm 1.3.6.1.2.1.16.0.1 - fallingAlarm 1.3.6.1.2.1.16.0.2 FIGURE 22 RMON traps hierarchy Textual conventions Table 18 lists the textual conventions used for RMON MIB. Fabric OS MIB Reference 59 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 80
) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of Ethernet utilization. The total number of packets (including bad packets, broadcast packets, and multicast packets) received. 60 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 81
and 255 octets in length inclusive (excluding framing bits but including FCS octets). The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). Fabric OS MIB Reference 61 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 82
octets in length inclusive (excluding framing bits but including FCS octets). The entity that configured this entry and is therefore using the resources assigned can be set to any number of seconds between 1 and 3600 (1 hour). The default value is 1800. 62 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 83
(excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but either had a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Fabric OS MIB Reference 63 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 84
over which the data is sampled and compared with the rising and falling thresholds. The object identifier of the particular variable to be sampled. 64 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 85
16.9 eventTable 1.3.6.1.2.1.16.9.1 Access Not accessible Not accessible Description A set of parameters that describe an event to be generated when certain conditions are met. An event is created using the rmon event command. A list of events to be generated. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 86
configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations of the event that activated this log entry. 66 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 87
Traps TABLE 24 Trap name and OID rmonEventsV2 1.3.6.1.2.1.16.0 risingAlarm 1.3.6.1.2.1.16.0.1 fallingAlarm 1.3.6.1.2.1.16.0.2 Variables Description entry crosses its falling threshold and generates an event that is configured for sending SNMP traps. Fabric OS MIB Reference 67 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 88
3 RMON Traps 68 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 89
MIBs and supported Fabric OS versions Fabric OS version FIBRE-CHANNEL-FE-MIB (MIB-II branch) FCFABRIC-ELEMENT-MIB (experimental branch) v7.1.0 Yes No v7.0.0 Yes No v6.4.1_fcoe Yes No v6.4.0 Yes No v6.3.0 Yes No v6.2.0 Yes No v6.1.2_CEE Yes No Fabric OS MIB Reference 69 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 90
not support the settable "Write" function for any of the Fibre Channel FE MIB objects except fcFxPortPhysAdminStatus. The object types in FIBRE-CHANNEL-FE-MIB are organized into the following groupings: • Configuration • Operational • Error • Accounting • Capability 70 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 91
-FE-MIB organization Figure 23 through Figure 28 depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso - org - dod - internet - mgmt - mib-2 - - fcFeClass2Accounting - fcFeClass3Accounting - fcFeCapabilities FIGURE 23 fcFeMIB hierarchy Fabric OS MIB Reference 71 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 92
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.1. 75.1.1.5.1.13 - fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 FIGURE 24 fcFeConfig hierarchy 72 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 93
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.3.1.1.11 - fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.12 FIGURE 26 fcFeError hierarchy Fabric OS MIB Reference 73 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 94
1.3.6.1.2.1.75.1.5.1.1.11 - fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 - fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 FIGURE 28 fcFeCapabilities hierarchy Definitions for FIBRE-CHANNEL-FE-MIB Table 26 lists the definitions for fcFeMIB. 74 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 95
IEEE extended Local A 24-bit value unique within the address space of a fabric. Receive data field size of an Nx_Port or Fx_Port. Buffer-to-buffer credit of an Nx_Port or Fx_Port. Version of FC-PH supported by an Nx_Port or Fx_Port. Indicates the Class 1 Stacked Connect Mode supported by an Nx_Port - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 96
4 (longWaveLED (LE)) 5 (electrical (EL)) 6 (shortWaveLaser-noOFC (SN)) The FC-0 distance range associated with a port transmitter: 1 (unknown) 2 (long) 3 (intermediate) 4 (short) Maximum number of modules within a fabric element; returns 1 for all devices. 76 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 97
group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports. The group represents a set of parameters associated with the fabric element or an Fx_Port to support its Nx_Ports. Fabric OS MIB Reference 77 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 98
, module in test mode • 4 - faulty, module is defective Contains the value of sysUpTime when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. 78 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 99
ports 64 ports 32 ports 40 ports 80 ports 32 ports 16 ports 24 ports 32 ports 32 ports 640 ports 320 ports 384 ports 24 ports 48 ports 96 ports 320 ports 640 ports 40 ports The Name_Identifier of the module. This object returns the WWN of the switch. A table that contains configuration and service - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 100
a frame might be delayed within the fabric and still be delivered. The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout value is used as the time-out value for detecting an error condition. A value indicating the set of Classes of Service supported by the Fx_Port. A flag indicating - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 101
assign its address identifier to its attached Nx_Ports during fabric login. The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. NOTE: This object is not supported on - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 102
service parameters established from a successful fabric login. The associated Nx_Port in the attachment for which the entry contains information. The version of FC-PH that the Fx_Port has agreed to support from the fabric login. The total number of buffers available for holding Class 1 connect - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 103
the counters in the link error status block. Not An entry containing error counters of a Fx_Port. accessible Read only The number of link failures detected by this Fx_Port. Read only The number of loss of synchronization errors detected by the Fx_Port. Fabric OS MIB Reference 83 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 104
. The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. The number of Offline Sequence errors received by this Fx_Port. The number of Offline Sequence issued by this Fx_Port. fcFeAccounting group The Accounting group is supported only in Fabric OS v4.x. The - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 105
until the connection is disengaged, either by an EOFdt or Link Reset. fcFxPortC2AccountingTable Not A table that contains Class 2 accounting information recorded since 1.3.6.1.2.1.75.1.4.2 accessible the management agent has re-initialized, one entry for each Fx_Port in the fabric element - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 106
field in a frame that the 1.3.6.1.2.1.75.1.5.1.1.6 Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 Read only A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. 86 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 107
that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The object types in FCFABRIC-ELEMENT-MIB are organized into the following groups: • Configuration • Operational • Error • Accounting (not supported) Fabric OS MIB Reference 87 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 108
fcFeOp - fcFxPortOperTable - fcFxPortPhysTable - fcFxlogiTable - fcFeError - fcFxPortErrorTable - fcFeAcct - fcFxPortC1AcctTable - fcFxPortC2AcctTable - fcFxPortC3AcctTable - fcFeCap - fcFxPortCapTable FIGURE 29 FCFABRIC-ELEMENT-MIB overall tree structure 88 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 109
14 - fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 - fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 - fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 - fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 - fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 FIGURE 30 fcFeConfig hierarchy Fabric OS MIB Reference 89 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 110
1.3.6.1.3.42.2.1.3.1.1.10 - fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 - fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.1.1.12 - fcFxPortOlsIns 1.3.6.1.3.42.2.1.3.1.1.13 - fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 FIGURE 32 fcFeError hierarchy 90 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 111
to 60 bits wide, occupying the remaining 8 bytes while the first nibble identifies the format of the Name_Identifier. Name_Identifier hex values: 0 (Ignored) 1 (IEEE 48-bit address) 2 (IEEE extended) 3 (Locally assigned) 4 (32-bit IP address) Fabric OS MIB Reference 91 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 112
The name identifier associated with a port. Only the following formats are allowed: IEEE48 IEEE extended Local A 24-bit value unique within the address space of a fabric. Receive Data_Field size. Buffer-to-buffer credit. Represents the version of FC-PH supported by an Nx_Port or Fx_Port. 1 (none - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 113
group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports. The group represents a set of parameters associated with the fabric element or an Fx_Port to support its Nx_Ports. Fabric OS MIB Reference 93 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 114
module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive; however, the numbers are not required to be contiguous. The Name_Identifier of the module. The return value is the WWN of the switch. 94 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 115
Fx_Port has a unique port name within the address space of the fabric. The return value is the WWN of the port. The highest or most recent version of FC-PH that the Fx_Port is configured to support. The lowest or earliest version of FC-PH that the Fx_Port is configured to support. The total number - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 116
do not support this MIB variable. The FC-0 medium of the Fx_Port. The FC-0 transmitter type of the Fx_Port. The FC-0 distance range of the Fx_Port transmitter. fcFeOp group This group consists of tables that contain operational status and established service parameters for the fabric element and - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 117
state (2). As the result of either explicit management action or per configuration information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline state (2). Fabric OS MIB Reference 97 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 118
cannot proceed. • testing (3) Port is under test. link-failure (4) Failure after online/testing version of FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 Read only The total number of buffers available for holding Class 1 connect - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 119
that contain information about the various types of errors detected. The management station might use the information in this group to determine the quality of the link between the Fx_Port and its attached Nx_Port. Implementation of this group is optional. Fabric OS MIB Reference 99 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 120
this Fx_Port to the attached Nx_Port. The number of Offline Sequence errors received by this Fx_Port. The number of Offline Sequence errors issued by this Fx_Port. fcFeAcct group Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable. 100 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 121
Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. Valid values: • yes (1) • no (2) A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. Fabric OS MIB Reference 101 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 122
. This variable has been deprecated and might be implemented for backward compatibility. A value indicating the set of media that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility. 102 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 123
overview Entity MIB is the module for representing multiple logical entities supported by a single SNMP agent. This MIB is supported only in Fabric OS v5.x, v6.0, v6.1, v6.1.2_CEE, v6.2.0, v6.3.0, organization and structure of the Entity MIB file system. Fabric OS MIB Reference 103 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 124
- entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 - entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 FIGURE 36 entityPhysical hierarchy - entityLogical - entLogicalTable .1.2.1.1.7 - entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.8 FIGURE 37 entityLogical hierarchy 104 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 125
they are imported. TABLE 37 Object Objects imported into the Entity MIB Imported from this module MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE mib-2 SNMPv2-SMI Fabric OS MIB Reference 105 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 126
(2) chassis (3) The physical entity class is known but does not match any of the supported values. The physical entity class is unknown to the agent. The physical entity class is within a chassis, and a chassis might be contained only within a stack. 106 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 127
switch power-supplying IP address + port number along with the private enterprise number and algorithm type used. An example of this type of snmpEngineID would be 00.00.06.34.00.00.00.A1.0A.20.93.CA (hex) Syntax OCTET STRING (SIZE(0..32)) Empty string or SnmpEngineID Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 128
as chassis, blade, port, and so on). This object should contain a string that identifies the entity manufacturer's name and should be set to a distinct value for each version or model of the physical entity. The name provides the entity type and number (for example, slot 1, power supply, and so on - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 129
set switches can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one blade, two power supplies, three fans) • Module: One entry for blades, two entries for power supplies, and three entries for fans Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 130
of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one switch blade, two power supplies, three fans) • Module: One entry for switch blade, up to two entries for power supplies, and up to three entries for fans 110 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 131
-40FC switch can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one blade, two power supplies, two fans) • Module: One entry for blades, two entries for power supplies, and two entries for fans Fabric OS MIB Reference 111 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 132
, slot 1 and the card in slot 1). The name provides the type of the entry and its number (for example, slot 1, power supply, and so on). The description gives the textual description of the type of the entry (for example, power supply, module, and so on). 112 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 133
such information to a printable format, in an implementation-specific manner. If no specific firmware programs are associated with the physical component, or if this information is unknown to object will contain a zero-length string. Set to empty string. Fabric OS MIB Reference 113 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 134
that result in a change of the physical entity's entPhysicalIndex value. Set to serial number and part number (if available), respectively. NOTE: For the Brocade 4024 blade, entPhysicalSerialNum displays the vendor-specific serial number; for other switches it displays the factory serial number. The - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 135
and chassis type entries. TABLE 40 Platform entPhysicalTable entries for Brocade switches Blades Fans Brocade 200E 1 3 fans not a FRU Brocade 3016 1 NA Power supply 1 PS not a FRU NA WWN card 1 WWN unit not a FRU 1 WWN unit not a FRU Fabric OS MIB Reference 115 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 136
Brocade switches (Continued) Blades Fans Power supply Brocade 3250 1 3 fans 1 PS not a FRU not a FRU Brocade 3850 1 4 fans 2 PS not a FRU not a FRU Brocade 3900 1 6 fans in 3 FRUs 2 PS Brocade 4012 Brocade unit 2 WWN units 2 WWN units 116 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 137
entries for Brocade switches (Continued) Blades Fans Power supply Brocade 7800 Extension 1 Switch Brocade VA- supported. Entity mapping group This group is not supported. General group This group is not supported. Entity MIB trap Entity MIB trap is not supported. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 138
The compliance statement for SNMP entities that implement version 2 of the Entity MIB. Mandatory groups: implementation of the entityLogicalGroup or entityLogical2Group is required to support this table. • Type: Object Object: entPhysicalSerialNum Min . 118 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 139
, and port identifiers, for which a single agent provides management information. management information. Objects: • entLastChangeTime The collection of notifications used to indicate Entity MIB data consistency and general status information. Notifications: entConfigChange Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 140
used to represent the list of logical entities, for which a single SNMP entity provides management information. Objects: • entLogicalDescr • entLogicalType • entLogicalTAddress • entLogicalTDomain • entLogicalContextEngineID • entLogicalContextName 120 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 141
Entity MIB conformance information 5 Fabric OS MIB Reference 121 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 142
5 Entity MIB conformance information 122 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 143
traps 135 •Switch system group 141 •Switch Fabric group 149 •Switch agent configuration group 151 •Fibre Channel port group 152 •Name Server database group 156 •Event group 158 •Fabric Watch group 159 •End device group 168 •Switch group 169 •Bloom performance monitor group 170 •Trunking - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 144
1588.2.1.1.1.0.11 - swStateChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.12 - swPortMoveTrap 1.3.6.1.4.1.1588.2.1.1.1.0.13 - swBrcdGenericTrap 1.3.6.1.4.1.1588.2.1.1.1.0.14 - swDeviceStatusTrap 1.3.6.1.4.1.1588.2.1.1.1.0.15 FIGURE 44 swTrapsV2 hierarchy 124 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 145
- swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 - swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1. 1588.2.1.1.1.1.23 - swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 - swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 - 1588.2.1.1.1.1.36 FIGURE 45 swSystem hierarchy Fabric OS MIB Reference 125 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 146
- swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.15 - swVfName 1.3.6.1.4.1.1588.2.1.1.1.2.16 FIGURE 46 swFabric hierarchy - swModule (1.3.6.1.4.1.1588.2.1.1.1.3) .2.1.1.1.4.11.1.3 - swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 FIGURE 48 swAgtCfg hierarchy 126 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 147
- swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 - swFCPortRxLCs 1.3.6.1.4.1.1588 - swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 - swFCPortRxBadEofs 1.3.6.1.4.1.1588 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 FIGURE 49 swFCport hierarchy Fabric OS MIB Reference 127 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 148
1588.2.1.1.1.8.5.1.2 - swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 - swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 - swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 - swEventVfid 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6 FIGURE 51 swEvent hierarchy 128 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 149
swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 - swFwDefaultBelowActs 1.3.6.1.4.1.1588 swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 - swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10 1588.2.1.1.1.10.3.1.12 FIGURE 52 swFwSystem hierarchy Fabric OS MIB Reference 129 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 150
23.3.1 - swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 - swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 - swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 - swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 FIGURE 55 swBlmPerfMnt hierarchy 130 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 151
1588.2.1.1.1.26.8 - swMemPollingInterval 1.3.6.1.4.1.1588.2.1.1.1.26.9 - swMemAction 1.3.6.1.4.1.1588.2.1.1.1.26.10 - swMemUsageLimit1 1.3.6.1.4.1.1588.2.1.1.1.26.11 - swMemUsageLimit3 1.3.6.1.4.1.1588.2.1.1.1.26.12 FIGURE 58 swCpuorMemoryUsage hierarchy Fabric OS MIB Reference 131 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 152
SwTrunkMaster Octet String of size 8 The World Wide Name (WWN) of Brocade-specific products and ports. Integer of size 1 to 239 Fibre Channel domain ID of the switch. Integer of size 1 to 2048 Index of the neighbor inter-switch link (ISL) entry. Integer of size 1 to 1024 Index of the sensor - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 153
swFwStPlRn 15 swFwElStPlRn 16 swFwMailAlert 17 supported) 2 swFwDefault 3 swFwCustom Commands: • portthconfig To set port thresholds • thconfig To set other thresholds • sysmonitor --config To set ENV/RES class ENV- Environment, RES - Resource SW-MIB overview 6 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 154
31 swFwEPortRXPerf 32 swFwEPortTXPerf 33 swFwEPortState 84 swFwEPortUtil (not supported) 87 swFwEPortLr 91 swFwEPortC3Discard 97 swFwEPortTrunkUtil 94 swFwVEPortStateChange 95 swFwVEPortUtil 96 swFwVEPortPktLoss Resource class: 83 swFwResourceFlash 134 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 155
for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. In the index swFwEnvTemp, Env refers to Environment class and Temp refers to the area Temperature. SwFwWriteVals Integer Write-only variable for applying or canceling values or action matrix changes: 1 swFwCancelWrite - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 156
Commands to configure "swFault" on page 137 N.A. (not supported) "swSensorScn" on page 137 N.A. "swFCPortScn" on page 137 "swEventTrap" on page 138 Always on For more information, refer to the snmpConfig command in the Fabric OS Command Reference. "swFabricWatchTrap" on page 138 Fabric OS - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 157
with the switch. #TYPE Switch is faulty. #SUMMARY Faulty reason: Fibre Channel Port changed its operational state. #SUMMARY Port Index %d changed state to %d. Port Name: %s and SSN is #%s #ARGUMENTS 1, 0, 2, 3 #SEVERITY Informational #TIMEINDEX 1 #STATE Operational Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 158
severity level association. Whenever an error message is generated at or above that configured severity level the recipient is notified of the event. This trap is generated for all RASLog messages. To get more details on any particular event, refer to the Fabric OS Message Reference. Trap to be sent - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 159
from the fabric. • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Fabric OS MIB Reference 139 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 160
by default. This trap is sent for one of the following events: • fabric change • device change • FAPWWN change • FDMI events This trap is enabled by default. NOTE: This trap is for internal use. This trap is sent whenever a device logs in or logs out. 140 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 161
when the firmware was last loaded to the switch. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 Fabric OS MIB Reference 141 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 162
version f = software maintenance version For example, v6.1.0_main_bld36 describes firmware version 6.1.0 and the specific build number 36. Some versions may not have a build number and will appear as the version. For example, v6.1.0 indicates Fabric OS version 6.0.0. 142 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 163
by an external Fibre Channel port. • faulty (4) - The switch is not operational. swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 Read-write The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Possible - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 164
commands, refer to the Fabric OS Command Reference. swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 Read-write The name or IP address (in dot notation) of the host to download or upload a relevant file to the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 165
switch has experienced an embedded port fault. swNumSensors Read only 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 166
task] • Track-changes on • Track-changes off swID Read only With VF-enabled fabric, the number of switches will be 0 to 128. 1.3.6.1.4.1.1588.2.1.1.1.1.24 swEtherIPAddress Read only Supported in Fabric OS v6.2.0 and later releases. 1.3.6.1.4.1.1588.2.1.1.1.1.25 The IP address of the Ethernet - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 167
changes whenever the port or the node goes to online or offline state. TABLE 46 Platform Sensors on the various Brocade switches Temp Fans Brocade 200E Brocade 300 Brocade 3014 Brocade 3016 Brocade 3250 Brocade 3850 Brocade 3900 Brocade 4012 Brocade 4016 Brocade 4018 Brocade 4020 Brocade - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 168
FC10-6 FR4-18i FA4-18 18 FC4-16IP FS8-18 FX8-24 FCOE10-24 FC8-16 FC8-32 1 sensor 5 sensors 5 sensors 5 sensors 5 sensors 3 sensors 5 sensors 5 sensors 7 sensors swNumSensors / connUnitNumSensors 3 2 2 2 2 2 18 18 7 17 17 17 23+ 23+ 9 8 8 8 65+ 39+ 8 7 148 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 169
the maximum number of ports +1. swNbRemDomain Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW. Fabric OS MIB Reference 149 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 170
is the port index on the other end of the ISL. The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000, port. swFabricMemTable Not This table contains information on the member switches of a fabric. 1.3.6.1.4.1.1588.2.1.1.1 accessible Supported in Fabric OS - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 171
Fabric ID of the switch. swVfName Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.16 This represents the virtual switch name configured in the switch. Switch agent configuration are read only. You can change the community setting using the snmpconfig command. Fabric OS MIB Reference 151 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 172
is six. If no trap recipient is configured, no traps are sent. The trap recipient IP address should be part of the Access Control List for Fabric OS v2.6.1, v3.1, and v4.x (refer to the Fabric OS Command Reference and the snmpConfig command for more information). This is the trap severity level - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 173
- When queried port is online. • Offline - When queried port is offline. • Faulty - When port is in faulty state. The following values can be used to set this object: • Online - To change port's state to Online. • Offline - To change port's state to Offline. Fabric OS MIB Reference 153 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 174
Fibre Channel port group TABLE 50 Object and OID Access Description swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.6 Read-write Indicates the link state of the port. When the port's link state changes 0. 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.20 154 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 175
of encoding error or disparity error outside frames received. swFCPortRxBadOs Read only Counts the number of invalid ordered sets received. WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as specified in FC-PH. Fabric OS MIB Reference 155 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 176
. NOTE: This object is deprecated. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.36 Read only Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE: The names should be persistent across switch reboots. Port names do not have to be unique within - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 177
of the node for the entry as defined in FC-GS-2. This value is read only and cannot be changed. The IP address of the node for the entry as defined in FC-GS-2. The format of the address is in IPv6. The class of services supported by the port. This value is a hard-coded bitmap and indicates the - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 178
event entries. The events will be received from the CHASSIS and the created logical switches. Only external RASlog messages are supported. These external messages are documented in the Fabric OS Message Reference. An entry of the event table. Every RASLOG message is identified with a unique number - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 179
on error messages, refer to the Fabric OS Message Reference. This object identifies the Virtual Fabric ID. Fabric Watch group The Fabric Watch group contains one license scalar and two tables. • The scalar, "swFwFabricWatchLicense", is used to tell if the switch has proper license for Fabric Watch - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 180
the Fabric Watch classArea combination. 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 For the class areas configured in the switch, use the thconfig --show command. swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 Read-write This applies or cancels the configuration value changes. For - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 181
be saved by setting this variable to swFwApplyWrite. Changes to these custom alarm variables can be removed by setting this variable to swFwCancelWrite. swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 5 Read only Default action matrix for changed event. Fabric OS MIB Reference 161 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 182
Default action matrix for in-between event. 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 9 swFwCustChangedActs Read-write Custom action matrix for changed 4 swFwValidActs Read only Matrix of valid acts for a classArea. 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 5 162 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 183
the write operation sets the variable to 2 (swFwDefault), the following default action matrix variables are used for the Fabric Watch classArea combination: 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 Not An entry of an individual threshold. accessible Fabric OS MIB Reference 163 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 184
6 For port-related classes such as E_Port, the indexes are from 1 through (number of ports). For eportLink015: index of 16 swFwStatus Read-write changed (2) • exceeded (3) • below (4) • above (5) • inBetween (6) • lowBufferCrsd (7) NOTE: This object is deprecated. 164 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 185
swFW faulty • • None • Critical • Error • Warings • Informational • supported) Env Power Supply 2 (Not supported) Env Temperature 1 GBIC Temperature 1 GBIC RX power 1 GBIC TX power 1 GBIC Current 1 SFP Voltage 1 SFP GBIC change 0 E Port Invalid CRCs 7 E Port Link Failures 7 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 186
down Fabric Fabric login Fabric FabricQL (Not supported) Fabric Reconfigure Fabric Segmentation Fabric Zoning change FCU Port Invalid CRCs 13 FCU Port Link Failures 13 FCU Port Protocol Errors 13 FCU Port RX Performance 13 FCU Port Loss of Signal 13 FCU Port State Changes 13 FCU Port Loss of Sync - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 187
FOP Port Link Failures 13 FOP Port Protocol Errors 13 FOP Port RX Performance 13 FOP Port Loss of Signal 13 FOP Port State Changes 13 FOP Port Loss of Sync 13 FOP Port TX Performance 13 FOP Port Invalid Words 13 FOP Port Trunk Util 13 Security Telnet Violations 0 End-to-end RX Performance End-to-end - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 188
plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef. This is an obsolete entry and does not show any value. swEndDevicePortID Read only The Fibre Channel port address ID of the entry. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 168 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 189
.2 accessible all versions of the Fabric OS. swGroupMemEntry Not 1.3.6.1.4.1.1588.2.1.1.1.22.2. accessible 1 An entry for a member of a group. swGroupID Read only 1.3.6.1.4.1.1588.2.1.1.1.22.2. 1.1 This object identifies the group ID of the member switch. Fabric OS MIB Reference 169 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 190
23.2 accessible swBlmPerfEEMntEntry Not End-to-end monitoring counter for given port. 1.3.6.1.4.1.1588.2.1.1.1.23.2. accessible 1 swBlmPerfEEPort Read only 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.1 This object identifies the port number of the switch. 170 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 191
the actual reference key. swBlmPerfEECRC Read only 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.3 End-to-end CRC error for the frames that matched the SID-DID pair. swBlmPerfEEFCWRx Read only 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.4 Get end-to-end count of Fibre Channel words (FCW) received by the port that - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 192
swTrunkPortIndex Read only 1.3.6.1.4.1.1588.2.1.1.1.24.2. 1.1 This object identifies the switch port index. The value of a port index is extracted from the second octet of the port WWN stored in swFCPortWwn (refer to "swFCPortWwn" in the Fibre Channel port group). swTrunkGroupNumber Read only - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 193
24.3. 1.3 swTrunkGrpRx Read only 1.3.6.1.4.1.1588.2.1.1.1.24 port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wtx value) for the corresponding trunk ports object identifies the switch port number on which Fabric OS MIB Reference 173 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 194
CPU usage exceeds the specified threshold limit. The system's memory usage. The number of times the system should take a memory usage sample before sending the Fabric Watch trap that indicates the current memory usage. 174 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 195
Switch connectivity unit port statistics extension table This table is an extension of connectivity unit port connectivity unit port statistics. swConnUnitCRCWithBadE OF 1.3.6.1.4.1.1588.2.1.1.1. 27.1.1 Read only The number of frames with CRC error Fabric OS MIB Reference 175 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 196
6 Switch connectivity unit port statistics extension table TABLE end of the fibre. The number of low level interrupts generated by the physical and link layer. The object represents all the interrupts received on a port. The interrupt includes LLI, unknown, and so on. 176 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 197
Switch connectivity unit port statistics extension table 6 of times the port failed to transmit frames. The object shows the count for the number of times the port has gone to offline, online, and faulty state. The number Sublayer (PCS) block errors. Fabric OS MIB Reference 177 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 198
6 Switch connectivity unit port statistics extension table 178 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 199
features of Fabric OS v6.3.0. This MIB is supported only in Fabric OS v4.1.0 and later (and is not supported in Fabric OS v3.x or Fabric OS v2.6.x). The fibreChannel - haMIB - highAvailability - haMIBTraps FIGURE 60 HA-MIB overall tree structure Fabric OS MIB Reference 179 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 200
-MIB Imported from this module MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE TimeTicks Integer32 IpAddress mib-2 fibrechannel entPhysicalIndex entPhysicalName SNMPv2-SMI SW-MIB ENTITY-MIB 180 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 201
redundant (0) Dual CP with standby CP ready to take over. • nonredundant (1) Single or Dual CP system where the standby CP is not available to take over operation of the switch entPhysicalClass set to "Container (5)" and has a child entry having entPhysicalIsFRU set to "true (1)". In Fabric OS v6 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 202
The power consumption of the switch blades. This object has values only for the following blades: • FC16-32 port blade • FC16-48 port blade • CR16-8 core blade • CR16-4 core blade This object returns zero for other FRUs. .TABLE 65 Platform Valid FRU counts for the various Brocade switches Blades - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 203
various Brocade switches (Continued) Blades Fans Power supply Brocade DCX Brocade DCX-4S Brocade 300 Brocade 5100 Brocade 5300 Brocade 8000 Brocade 7800 Extension Switch Brocade 6505 Brocade 6510 Brocade 6520 Brocade DCX 8510-8 Backbone Brocade DCX 8510-4 Backbone Brocade VA-40FC 8 port blades - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 204
1.3.6.1.4.1.1588.2.1.2.1.7.1.1 Read only The current status of the CP. Valid values: other (1) unknown (2) active (3) standby (4) failed (5) cpIpAddress Read only The IP address of the Ethernet interface of this CP. 1.3.6.1.4.1.1588.2.1.2.1.7.1.2 184 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 205
IP mask of the Ethernet interface of this CP. The IP address of the IP is powered on or off • When the switch is rebooted • changes. The cpLastEvent variable provides the information about the event that occurred. Some of the triggers that will generate this trap are: • Reboot Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 206
7 HA-MIB traps 186 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 207
group 195 FICON MIB overview The FICON MIB module (LINK-INCIDENT-MIB) defines support for FICON in Fabric OS v4.1.2 and later. This MIB addresses link incident and link failure data for FICON hosts and devices connected to a Brocade switch. The descriptions of each of the MIB variables in this - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 208
- ficonLIRR - LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 - LIRRTable 1.3.6.1.4.1.1588.2.1.1.50.3.2 - LIRREntry 1.3.6.1.4.1.1588.2.1.1.50.3.2.1 - LIRRIndex 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.1 - LIRRListenerPortWWN 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.2 188 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 209
Current Represents the LIRR Protocol. INTEGER { fcp (1), sb2 (2) } Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a fabric. OCTET STRING (SIZE (3)) Represents the value of Model Number. OCTET STRING (SIZE (3)) Fabric OS MIB Reference 189 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 210
DISPLAY-HINT "x". OCTET STRING (SIZE (2)) Represents the link WWN. OCTET STRING (SIZE (8)) Represents the RNID Param. OCTET STRING (SIZE (3)) Represents the Port Type. INTEGER { n-port (1), nl-port (2), e-port (3) } Represents the value of RNID Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 211
command in the Fabric OS Command Reference. nodeRNIDTable Not A table that contains one entry for each FICON RNID node attached to 1.3.6.1.4.1.1588.2.1.1.50.2. accessible a switch 1588.2.1.1.50.2. 2.1.10 Read only WWN of the connected port. Fabric OS MIB Reference 191 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 212
of the connected port. switchRNIDTableNumEntries Read only 1.3.6.1.4.1.1588.2.1.1.50.2. 3 The number of entries in an RNID table that corresponds to the switch. For additional information on FICON MIB tables, refer to the ficonShow command in the Fabric OS Command Reference. switchRNIDTable Not - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 213
to the ficonShow command in the Fabric OS Command Reference. A table that contains LIRR information, one entry for each LIRR incident for an attached FICON device. An entry containing LIRR information. Index into the LIRR table. WWN of the Listener port. PID for the Listener port. Registration type - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 214
RLIR table. Port WWN for RLIR Incident port. Incident node WWN. RLIR Incident port type. RLIR Incident PID. RLIR Incident port number. This is a vendor-specific port number. RLIR Connected port WWN. RLIR Connected node WWN. RLIR Fabric WWN. RLIR Link failure type. 194 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 215
nodeVfId A device registered with the switch. linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 nodeRNIDIndex link failure incident has occurred. The value of lIRRIndex will be -2147483647 and IIRRListenerPID will be 0 if there is no listener for incident. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 216
8 LinkIncident MIB traps group 196 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 217
• Revision Number • Statistic Set • Service Set NOTE The port swap feature will not have any effect on SNMP for FA MIB. FCMGMT-MIB system organization of MIB objects Figure 65 through Figure 75 depict the high level organization of the FCMGMT-MIB. Fabric OS MIB Reference 197 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 218
1.3.6.1.3.94.2.3 - revisionNumber 1.3.6.1.3.94.3 - statSet + connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitServiceSet + connUnitServiceScalars 1.3.6.1.3.94.5.1 + connUnitServiceTables 1.3.6.1.3.94.5.2 FIGURE 65 FCMGMT-MIB high level hierarchy 198 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 219
94.1.6.1.15 - connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 - connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 - 1.3.6.1.3.94.1.6.1.23 - connUnitLocation 1.3.6.1.3.94.1.6.1.24 - connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 - FIGURE 68 ConnUnitSensorTable hierarchy Fabric OS MIB Reference 199 53-1002750- - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 220
1.3.6.1.3.94.1.10.1.15 - connUnitPortControl 1.3.6.1.3.94.1.10.1.16 - connUnitPortName 1.3.6.1.3.94.1.10.1.17 - connUnitPortPhysicalNumber 1.3.6.1.3.94 11.1.8 - connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 FIGURE 70 ConnUnitEventTable hierarchy 200 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 221
- trapRegTable 1.3.6.1.3.94.2.3 - trapRegEntry 1.3.6.1.3.94.2.3.1 - trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 - trapRegPort 1.3.6.1.3.94.2.3.1.2 - trapRegFilter 1.3.6.1.3.94.2.3.1.3 - trapRegRowState 1.3.6.1.3.94.2.3.1.4 FIGURE 72 TrapRegTable hierarchy Fabric OS MIB Reference 201 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 222
connUnitPortStatCountClass1FBSYFrames 1.3.6.1.3.94.4.5.1.16 - connUnitPortStatCountClass1PBSYFrames 1.3.6.1.3. connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 - connUnitPortStatCountClass2PRJTFrames 50 FIGURE 73 ConnUnitPortStatTable hierarchy 202 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 223
the SNS table. Octet String of size An optional global-scope identifier for this connectivity unit. It MUST be a WWN for this 16 connectivity unit or 16 octets of value zero. Octet String of size 3 The Port Identifier for this entry in the SNS table. Fabric OS MIB Reference 203 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 224
a system. 13 (swdriver) Software driver. 14 (storage-access-device) Provides storage management and access for heterogeneous hosts and heterogeneous devices. Connectivity unit group Implementation of the connectivity group is mandatory for all systems. 204 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 225
during a launch. USER Replace with username PASSWORD Replace with password GLOBALID Replace with global ID SERIALNO Replace with serial number The expected value for system URL.0 is: http://{a.b.c.d} where {a.b.c.d} is the IP address of the switch if a Web Tools license is available. ""(null) where - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 226
, then use the SNMP GET command on connUnitGlobalId.10.0.0.60.69.10.02.18.0.0.0.0.0.0.0.0 returns: 10 00 00 60 69 10 02 18 00 00 00 00 00 00 00 00 The type of this connectivity unit. Set to 4 for Fibre Channel switches or to 14 for Brocade Access Gateway. 206 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 227
number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 5100 40 ports Brocade 5300 Brocade 7500 or 7500E Brocade 7600 80 ports 32 ports 16 ports Brocade 7800 Extension Switch 24 ports Brocade 8000 Brocade - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 228
"" is the IP address of the switch if Web Tools license is not available. 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If this value is not applicable, return all bits to one. Set to the switch domain ID (as per FC-SW). For a Brocade Access - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 229
switchName/sysName. A display string containing information about this connectivity unit. This object value should be persistent between boots. For a Fabric switch set to sysDescr and read only. For a Brocade Access Gateway device set to "Access Gateway." Fabric OS MIB Reference 209 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 230
Enable switch. The addressed unit puts itself into an implementation-dependant online state. In general, if a unit is in an online state, it is capable of performing meaningful Fibre Channel work. Contact information for this connectivity unit. Displays the same value as sysContact. Changing the - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 231
2 returns the Fabric OS version from telnet command version: for example, v2.6. Description of a component to which the revision corresponds. Index 1 returns the hardware version. Index 2 returns the software version. Table of the sensors supported by each connectivity unit managed by this agent - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 232
Connectivity this is for the power supply; otherwise, returns Null. power (9) • door (10) - Not supported in Fabric OS v2.6.1. Generic information on ports for a specific connUnit NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. 212 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 233
6510 Brocade 6520 Brocade DCX 8510-4 Backbone Brocade DCX 8510-8 Backbone Brocade VA-40FC 24 ports 32 ports 64 ports 32 ports 40 ports 80 ports 32 ports 16 ports 24 ports 32 ports 32 ports 640 ports 320 ports 384 ports 24 ports 48 ports 96 ports 320 ports 640 ports 40 ports Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 234
. (Not supported in Fabric OS v2.6.1.) • dc (18) DC power line. (Not supported in Fabric OS v2.6.1.) • ssa (19) Serial storage architecture. (Not supported in Fabric OS v2.6.1.) Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 235
• failure (5) - Port is faulty. • notparticipating (6) - Loop not participating and does not have a loop address. Do not use. • initializing (7) - Protocol is proceeding. Do not use. • bypass (8) - Do not use. • ols (9) - FCP offline status. (Not supported in Fabric OS v2.6.1.) NOTE: In Fabric OS v2 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 236
• unused (3) • shortwave (4) • longwave (5) • copper (6) • scsi (7) • longwaveNoOFC (8) • shortwaveNoOFC (9) • longwaveLED (10) • ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper). The module type of the - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 237
"DD AA PP" (for example, "02 00 02"). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a different AA value for each link. The Brocade Access Gateway "PP" is the port number for F_Ports and is always zero for N_Ports - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 238
uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch. • Disabling the FC port that is connected to the management station • Disabling the embedded port 218 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 239
number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 5100 40 ports Brocade 5300 80 ports Brocade 7500 or 7500E 32 ports Brocade 7600 16 ports Brocade 7800 Extension Switch 24 ports Brocade 8000 32 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 240
(4) Connected to a device (light and sync are present). • loopback (5) Port in ext loopback (loopback state). • txfault (6) Transmitter fault (bad GBIC). • noMedia (7) Media not installed (GBIC removed). • linkDown (8) Waiting for activity-rx sync (light with no sync). 220 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 241
Only external RASlog messages are supported. Fabric OS v4.4.0 and later releases do not have Panic or Debug level messages. All external messages are documented in the Fabric OS Message Reference. Each entry contains information on a specific event for the given connectivity unit. The connUnitId of - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 242
event refers. It can be the OID of a connectivity unit or of another object, like connUnitPortStatus. Always set to null. The description of the event. Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. For Fabric OS v6 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 243
1.3.6.1.3.94.1.12.1 connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 Not accessible Read only An entry describing a particular link to another. The connUnitId of the connectivity unit that contains this link table. Set to WWN of the local switch. Fabric OS MIB Reference 223 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 244
" assigned by IANA to identify the address format (for example, 1 is Ipv4, 2 is Ipv6). ISL- Type 1. Device- 0 (Null). The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. ISL- IP port. Device- 0 (Null). 224 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 245
Type of the FC connectivity unit, as defined in connUnitType. • ISL- Switch device. • End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. Table 76 displays the types of the connectivity unit. This is the Fibre Channel ID of this port. If the connectivity unit is - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 246
of a frame that could not be delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. This is the sum of all classes. If - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 247
not be delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames. Return value - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 248
end of the link. This occurs if either the fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Return value - 800000000 NOTE: This object is not supported. connUnitPortStatCountCl - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 249
connUnitPortStatCountL ossofSynchronization 1.3.6.1.3.94.4.5.1.44 Read only The number of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic. Fabric OS MIB Reference 229 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 250
9 Service group TABLE 77 Object and OID Access Description connUnitPortStatCountIn Read only validOrderedSets 1.3.6.1.3.94.4.5.1.45 The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel only statistic - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 251
FC-4 types supported by this entry in the SNS table. connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 Read only The port type of this entry in the SNS table. connUnitSnsPortIPAddress Read only The IPv6 formatted address symbolicPortname appears as "null". Fabric OS MIB Reference 231 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 252
The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. The current number of rows in the trap table. Not accessible A table containing a row for each IP address or port number to which traps are sent. Not accessible IP/port pair for a specific client. Read only - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 253
are set to default values. supported in FOS v2.6.1, v5.x, and v6.0 and later versions. Brocade does not support the following: • Connectivity Unit Port Statistics Hub Table • Connectivity Unit Port Statistics SCSI Table • Connectivity Unit Port Statistics LAN/WAN Table Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 254
status of the connectivity unit has changed. Recommended severity level (for filtering) - alert. Generated when connUnitStatus changes. For a description of how the value is calculated, refer to "connUnitStatus" on page 207. Sample trap output for Fabric OS v6.1.0. connUnitStatus.16.0.0.96.105.144 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 255
connUnitSensorStatus Overall status of the connectivity unit has changed. This trap is generated whenever the status of the sensors (like fan, power supply, temperature) present in the connectivity unit changes. Sample trap output for Fabric OS v6.1.0. connUnitSensorStatus.16.0.0.96.105.144.109.13 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 256
9 FibreAlliance MIB traps 236 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 257
statistics table 239 •Port configuration table for Fabric Assigned PWWN feature 239 •Port configuration table for encryption or - swSfpStatTable - swFapwwnFeature - swPortConfigTable - swConnUnitPortTable FIGURE 76 FA-EXT-MIB overall tree structure Fabric OS MIB Reference 237 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 258
the type of FAPWWN assigned to the port. 1 unknown 2 auto 3 userConfigured Represents the cipher mode. 1 none 2 allFrames 3 fcpAndNonFCP 4 onlyFCP Represents the status of encryption or compression feature on a port. 1 enabled 2 disabled 3 unknown 238 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 259
The table represents the FAPWWN configuration of ports. 1.3.6.1.4.1.1588.2.1.1.1.28.2. accessible 1 swPortFapwwnConfigEntry Not An entry in this table that represents the FAPWWN configuration of 1.3.6.1.4.1.1588.2.1.1.1.28.2. accessible ports. 1.1 Fabric OS MIB Reference 239 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 260
userconfigured (3) Port configuration table for Fabric OS supports 256 bytes per key. swPortCipherMode Read only 1.3.6.1.4.1.1588.2.1.1.1.28.3. 1.4 The object represents the cipher mode. Valid values: • none (1) • allFrames (2) • fcpAndNonFCP(3) • onlyFCP (4) 240 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 261
of the connectivity unit. accessible Not This represents the port entry of the connectivity unit. accessible Read only This represents the capable port speed of the connectivity unit. Read only This represents the configured speed mode of the particular port. Fabric OS MIB Reference 241 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 262
10 Switch connectivity unit port table 242 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 263
extended link table • FCIP connection statistics table FCIP MIB system organization of MIB objects Figure 78 through Figure 83 depict the high level organization of the FCIP MIB relevant to the supported tables. For a description of the entire MIB, refer to RFC4044. Fabric OS MIB Reference 243 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 264
fcipTcpConnEntry 1.3.6.1.2.1.224.1.1.6.1 fcipTcpConnLocalPort 1.3.6.1.2.1.224.1.1.6.1.1 fcipTcpConnRemPort 1.3.6.1.2.1.224.1.1.6.1.2 fcipTcpConnRWSize 1.3.6.1.2.1.224.1.1.6.1.3 fcipTcpConnMSS 1.3.6.1.2.1.224.1.1.6.1.4 FIGURE 81 fcipTcpConnTable hierarchy 244 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 265
blade: • ipif 0 in FCIP GbE port 0/ge0 Example for Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade: • Circuit 0 in FCIP VE port 12 The type of Internet address by which the entity is reachable. Only address types IPv4 and IPv6 are supported. Fabric OS MIB Reference 245 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 266
IPv6 are supported. fcipLinkLocalFcipEntityAddre Read ss create 1.3.6.1.2.1.224.1.1.5.1.6 The Internet address for the local end of this FCIP Link. The format of this object is determined by the value of the fcipLinkLocalFcipEntityAddressType object. 246 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 267
(MSS) for this TCP connection. FCIP extended link table The FCIP extended link table contains statistical information about FCIP tunnel transport operation. The information stored in this table is returned in response to portshow fciptunnel commands. Fabric OS MIB Reference 247 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 268
latency details. The information stored in this table is returned in response to portshow fciptunnel commands. fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 Not A conceptual row of the FCIP extended link containing slow starts. 1.3.6.1.4.1.1588.4.1.1.14 248 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 269
latency details. This table also gives details about FCIP circuit statistics for the Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade. This table is not supported for the Brocade 7500 or FR4-18i router blade. Corresponding CLI command received. Fabric OS MIB Reference 249 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 270
11 FCIP connection statistics table 250 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 271
• iSCSI Connection Attributes table NOTE iSCSI traps are not supported. iSCSI MIB system organization of MIB objects Figure 84 through Figure 89 depict the high level organization of the iSCSI MIB relevant to the supported tables. For a description of the entire MIB, refer to RFC4544. Fabric OS MIB - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 272
1.3.6.1.2.1.142.1.1.1.1.10 iscsiInstLastSsnFailureType 1.3.6.1.2.1.142.1.1.1.1.11 iscsiInstLastSsnRmtNodeName 1.3.6.1.2.1.142.1.1.1.1.12 iscsiInstDiscontinuityTime 1.3.6.1.2.1.142.1.1.1.1.13 FIGURE 85 iscsiInstanceAttributesTable hierarchy 252 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 273
10.1.1.15 iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16 iscsiSsnAuthIdentity 1.3.6.1.2.1.142.1.1.10.1.1.17 iscsiSsnDataSequenceInOrder 142.1.1.10.2.1.5 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 FIGURE 88 iscsi SessionStatsTable hierarchy Fabric OS MIB Reference 253 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 274
iSCSI specification supported by this iSCSI instance. This value is hard coded to zero. iscsiInstVendorID 1.3.6.1.2.1.142.1.1.1.1.5 Read only A UTF-8 string describing the manufacturer of the implementation of this instance. NOTE: This object is not supported. 254 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 275
not supported. management reboot has occurred. Agents should attempt to keep this value persistent across reboots. This node's iSCSI name. This name is independent of the location of the node, and can be resolved into a set of addresses through various discovery services. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 276
continuously increasing offsets, except during error recovery. NOTE: This object is not supported. iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13 Read- an unexpected connection termination or a connection reset. NOTE: This object is not supported. 256 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 277
connection termination or a connection reset. NOTE: This object is not supported. iscsiNodeErrorRecoveryLevel Read-write The Error Recovery Level preference of this node. 1.3.6.1.2.1.142.1.1.5.1.1.16 isciSessionAttributesTable contains a set of rows that Fabric OS MIB Reference 257 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 278
no IPS-AUTH MIB False indicates that iSCSI data PDU sequences may be transferred in any order. True indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery.The default value for this is True. 258 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 279
continuously increasing addresses, with no gaps or overlay between PDUs. Default is true. The level of error recovery negotiated between particular accessible session. Read only The count of command PDUs transferred on this session. If this counter . Fabric OS MIB Reference 259 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 280
. The value 'dns' is not allowed. iscsiCxnAddrType is hard coded to the value IPv4. iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 Read only The local Internet Network Address, of the type specified by iscsiCxnAddrType, used by this connection. 260 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 281
markers in its outgoing data stream. This object is hard coded to false. iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 Read only Active version number of the SCSI specification negotiated on this connection. This object is hard coded to zero. Fabric OS MIB Reference 261 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 282
12 iSCSI connection attributes table 262 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 283
address table 264 •SNMP target parameters table 265 •SNMP community table 266 SNMPv2 MIB overview The descriptions of each of the MIB variables in this chapter come directly from the SNMPv2 MIB itself. The notes that follow the descriptions refer to Brocade hierarchy Fabric OS MIB Reference 263 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 284
create This object specifies a default number of retries to be attempted when a response is not received for a generated message. Read create This object contains a list of tag values which are used to select target addresses for a particular operation. 264 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 285
an inconsistentValue error if an attempt is made to set this variable to a value for a security model which the implementation does not support. The security name which identifies the principal on whose behalf the SNMP messages will be generated using this entry. Fabric OS MIB Reference 265 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 286
this table, a manager must set this object to either createAndGo (4) or createAndWait (5). Until instances of all corresponding columns are appropriately configured, the value of the value of snmpCommunityName in a security model independent format. 266 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 287
in which the management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. This object specifies a set of transport endpoints which status of this conceptual row in the snmpCommunityTable. Fabric OS MIB Reference 267 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 288
13 SNMP community table 268 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 289
as provided by Brocade. Figure 94 and Figure 95 depict the organization and structure of the usmMIBObjects MIB. - iso - org - dod - internet - snmpV2 - snmpModules - snmpUsmMIB - usmMIBObjects - usmStats - usmUser FIGURE 94 usmMIBObjects overall tree structure Fabric OS MIB Reference 269 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 290
contain the expected digest value. The total number of packets received by the SNMP engine which were dropped because they could not be decrypted. 270 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 291
Command Generator Applications to coordinate their use of facilities to alter secrets in the usmUserTable. usmUserTable 1.3.6.1.6.3.15.1.2.2 Not accessible The table of users configured in the SNMP engine's Local Configuration default the userName. set Fabric OS MIB Reference 271 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 292
, with one notable difference: For the Set operation to succeed, the usmUserName of the of the procedure for changing a user's secret authentication or privacy key, and later read to determine whether the change of the secret was this conceptual row. 272 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 293
- dot1xPaePortProtocolVersion 1.0.8802.1.1.1.1.1.2.1.2 - dot1xPaePortCapabilities 1.0.8802.1.1.1.1.1.2.1.3 - dot1xPaePortInitialize 1.0.8802.1.1.1.1.1.2.1.4 - dot1xPaePortReauthenticate 1.0.8802.1.1.1.1.1.2.1.5 FIGURE 97 dot1xPaeSystem hierarchy Fabric OS MIB Reference 273 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 294
- dot1xAuthBackendOtherRequestsToSupplicant 1.0.8802.1.1.1.1.2.3.1.15 - dot1xAuthBackendNonNakResponsesFromSupplicant 1.0.8802.1.1.1.1.2.3.1.16 - dot1xAuthBackendAuthSuccesses 1.0.8802.1.1.1.1.2.3.1.17 - dot1xAuthBackendAuthFails 1.0.8802.1.1.1.1.2.3.1.18 274 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 295
control for this port. Setting this attribute to TRUE causes the authenticator PAE state machine for the port to re-authenticate the supplicant. Setting this attribute to FALSE has no effect. This attribute always returns FALSE when it is read. Fabric OS MIB Reference 275 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 296
with each port. An entry appears in this table for each port that may authenticate access to itself. The configuration information for an authenticator PAE. The current value of the authenticator PAE state machine. Valid values: • initialize (1) • disconnected (2) • connecting (3) • authenticating - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 297
machine. A table that contains the statistics objects for the authenticator PAE associated with each port. The statistics information for an authenticator PAE. The number of valid EAPOL frames of ID frames) that have been transmitted by this authenticator. Fabric OS MIB Reference 277 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 298
the Packet Body Length field is invalid. The protocol version number carried in the most recently received EAPOL frame. The source MAC address carried in the most recently received EAPOL frame. A an EAPOL start message being received from the supplicant. 278 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 299
= TRUE). Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL start message being received from the supplicant. Counts objects for the authenticator PAE associated with each port. Fabric OS MIB Reference 279 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 300
final values for the last valid session on each port where there is no session currently active. The number of octets received in user data 999) The user name representing the identity of the supplicant PAE. NOTE dot1xPaeSupplicant group is not supported. 280 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 301
variables in this chapter come directly from the LLDP MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 99 through Figure 103 depict the organization and structure of the LLDP MIB. Fabric OS MIB Reference 281 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 302
16 LLDP MIB objects overview - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpNotifications - lldpObjects - lldpConfiguration - .1.1.2.1.1.6.1.4 - lldpConfigManAddrTable 1.0.8802.1.1.2.1.1.7 FIGURE 100 lldpConfiguration hierarchy 282 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 303
LLDP MIB objects overview 16 - lldpStatistics - lldpStatsRemTablesLastChangeTime 1.0.8802.1.1.2.1.2.1 - lldpStatsRemTablesInserts 1.0.8802.1.1.2.1.2.2 .1.1.2.1.3.8.1.5 - lldpLocManAddrOID 1.0.8802.1.1.2.1.3.8.1.6 FIGURE 102 lldpLocalSystemData hierarchy Fabric OS MIB Reference 283 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 304
configuration group. The interval at which LLDP frames are transmitted on behalf of the LLDP agent. The default value for this object is 30 seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. 284 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 305
status of the local LLDP agent. The object controls, on a per port basis, whether or not notifications from the agent are enabled. The values are as follows: • true(1) - The notifications are enabled. • false(2) - The notifications are not enabled. Fabric OS MIB Reference 285 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 306
while the lldpPortConfigEntry object is equal to 'disabled(4)'. lldpStatsRxPortEntry 1.0.8802.1.1.2.1.2.7.1 Not The LLDP frame reception statistics for a particular port. The port must accessible be contained in the same chassis as the LLDP agent. 286 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 307
on a given port. An age-out is the number of times the complete set of information advertised supported on the local system. lldpLocSysCapEnabled 1.0.8802.1.1.2.1.3.6 Read only The bitmap value used to identify which system capabilities are enabled on the local system. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 308
with the local system. lldpLocManAddrOID 1.0.8802.1.1.2.1.3.8.1.6 Read only The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent. 288 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 309
Not The management address information about a particular chassis accessible component. lldpRemManAddrSubtype Not The type of management address identifier encoding used in the 1.0.8802.1.1.2.1.4.2.1.1 accessible associated lldpRemManagmentAddr object. Fabric OS MIB Reference 289 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 310
will wrap between reboots. lldpRemOrgDefInfo 1.0.8802.1.1.2.1.4.4.1.4 Read only The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdminString TC. 290 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 311
LLDP-EXT-DOT1-MIB 16 LLDP-EXT-DOT1-MIB The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. LLDP-EXT- - lldpXdot1RemProtocolTable FIGURE 104 LLDP-EXT-DOT1-MIB overall tree structure Fabric OS MIB Reference 291 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 312
16 LLDP-EXT-DOT1-MIB - lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1 - lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962 32962.1.3.4.1.1 - lldpXdot1RemProtocolId 1.0.8802.1.1.2.1.5.32962.1.3.4.1.2 FIGURE 105 LLDP-EXT-DOT1-MIB hierarchy 292 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 313
-volatile storage after a re-initialization of the management system. lldpXdot1ConfigProtocolT able 1.0.8802.1.1.2.1.5.329 62.1.1.4 Not accessible The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports. Fabric OS MIB Reference 293 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 314
to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation. 294 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 315
the port and protocol VLANs are enabled on the given port associated with the local system. If fcoeport is configured then that interface supports protocol-based value used to identify the protocols associated with the given port of the local system. Fabric OS MIB Reference 295 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 316
the PVID or does not support port-based VLAN operation, the port component. lldpXdot1RemVlanId 1.0.8802.1.1.2.1.5.329 62.1.3.3.1.1 Not The integer value used to identify the IEEE 802.1Q VLAN IDs with which accessible the given port of the remote system is compatible. 296 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 317
16 a particular port component. Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. LLDP-EXT-DOT3-MIB organization Figure 106 and Figure 107 depict the organization and structure of the LLDP-EXT-DOT3-MIB. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 318
16 LLDP-EXT-DOT3-MIB - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpObjects - lldpExtensions - lldpXdot3MIB - lldpXdot3Objects - - lldpXdot3RemMaxFrameSize 1.0.8802.1.1.2.1.5.4623.1.3.4.1.1 FIGURE 107 LLDP-EXT-DOT3-MIB hierarchy 298 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 319
with the local system) supports auto-negotiation. lldpXdot3LocPortAutoNe gEnabled 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.2 Read only The truth value used to indicate whether port auto-negotiation is enabled on the given port associated with the local system. Fabric OS MIB Reference 299 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 320
The maximum frame size information about a particular port component. lldpXdot3LocMaxFrameS ize 1.0.8802.1.1.2.1.5.462 3.1.2.4.1.1 Read only An integer value indicating the maximum supported frame size in octets on the given port of the local system. 300 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 321
(IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and if it does not support link aggregation, this value should be zero. Fabric OS MIB Reference 301 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 322
size information about a particular port component. lldpXdot3RemMaxFrame Size 1.0.8802.1.1.2.1.5.462 3.1.3.4.1.1 Read only An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. 302 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 323
In this chapter •IEEE 802.3 LAG MIB overview 303 •Aggregator group 305 •Aggregator port group 307 IEEE 802.3 LAG MIB overview The descriptions of the MIB variables in this - dot3adTablesLastChanged FIGURE 108 IEEE 802.3 LAG MIB overall tree structure Fabric OS MIB Reference 303 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 324
840.10006.300.43.1.2.1.1.21 - dot3adAggPortPartnerAdminState 1.2.840.10006.300.43.1.2.1.1.22 - dot3adAggPortPartnerOperState 1.2.840.10006.300.43.1.2.1.1.23 - dot3adAggPortAggregateOrIndividual 1.2.840.10006.300.43.1.2.1.1.24 FIGURE 111 dot3adAggPortTable hierarchy 304 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 325
among the subordinate managed objects of the containing object. This value is read only. A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator. The show debug port-channel all command returns the aggregator MAC address. Fabric OS MIB Reference 305 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 326
of all the ports associated with each aggregator. A list of the ports associated with a given aggregator. The complete set of ports currently associated with this aggregator. Each bit set in this list represents an actor port member of this link aggregation. 306 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 327
value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. NOTE: This object is not supported. Fabric OS MIB Reference 307 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 328
is a 16-bit, read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation. 308 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 329
.10006.300.43.1. 2.2.1.4 Read only The number of frames received that either carry the Slow Protocols Ethernet Type value (43B.4), but contain an unknown PDU, or addressed to the slow protocols group MAC address (43B.4), but do not carry the Slow Protocols Ethernet Type. Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 330
• attached (3) • collecting (4) • distributing (5) • collectingDistributing (6) dot3adAggPortDebugMux Reason 1.2.840.10006.300.43.1. 2.3.1.4 Read only A human-readable text string indicating the reason for the most recent change of Mux machine state. 310 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 331
the LAG ID (see 43.3.6.1) for this aggregation port has changed. dot3adTablesLastChanged Read only 1.2.840.10006.300.43.1. 3 This object indicates the ti me of the most recent change to the dot3adAggTable, dot3adAggPortListTable, or dot3adAggPortTable. Fabric OS MIB Reference 311 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 332
17 Aggregator port group 312 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 333
of the Bridge-MIB. - iso - org - dod - internet - directory - mgmt - mib-2 - dot1dBridge - dot1dNotifications - dot1dBase - dot1dStp - dot1dTp - pBridgeMIB - qBridgeMIB - rstp FIGURE 114 Bridge-MIB overall hierarchy Fabric OS MIB Reference 313 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 334
- dot1dTpPort 1.3.6.1.2.1.17.4.4.1.1 - dot1dTpPortMaxInfo 1.3.6.1.2.1.17.4.4.1.2 - dot1dTpPortInFrames 1.3.6.1.2.1.17.4.4.1.3 - dot1dTpPortOutFrames 1.3.6.1.2.1.17.4.4.1.4 - dot1dTpPortInDiscards 1.3.6.1.2.1.17.4.4.1.5 FIGURE 115 Bridge-MIB hierarchy 314 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 335
- dot1dPortPriorityTable 1.3.6.1.2.1.17.6.1.2.1 - dot1dPortPriorityEntry 1.3.6.1.2.1.17.6.1.2.1.1 - dot1dPortDefaultUserPriority 1.3.6.1.2.1.17.6.1.2.1.1.1 - dot1dPortNumTrafficClasses 1.3.6.1.2.1.17.6.1.2.1.1.2 FIGURE 116 P-Bridge MIB hierarchy Fabric OS MIB Reference 315 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 336
- dot1qStaticMulticastReceivePort 1.3.6.1.2.1.17.7.1.3.2.1.2 - dot1qStaticMulticastStaticEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.3 - dot1qStaticMulticastForbiddenEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.4 - dot1qStaticMulticastStatus 1.3.6.1.2.1.17.7.1.3.2.1.5 316 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 337
Bridge MIB hierarchy - rstp - dot1dStpVersion 1.3.6.1.2.1.17.2.16 - dot1dStpTxHoldCount 1.3.6.1.2.1.17.2.17 - dot1dStpExtPortTable 1.3.6.1.2.1.17 .1.6 FIGURE 118 RSTP hierarchy Bridge-MIB The Bridge MIB module for managing devices that support IEEE 802.1D. Fabric OS MIB Reference 317 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 338
only The port number of the port for which this entry contains bridge management information. dot1dBasePortIfIndex 1.3.6.1.2.1.17.1.4.1.2 Read only The value of the instance of the ifIndex object, defined in IF-MIB, for the interface corresponding to this port. 318 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 339
Protocol, as executed by this node. This value is used as the Root Identifier parameter in all configuration bridge PDUs originated by this node. dot1dStpRootCost 1.3.6.1.2.1.17.2.6 Read only The cost of the path to the root as seen from this bridge. Fabric OS MIB Reference 319 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 340
configuration bridge PDUs by this node on any port return a badValue error if a set is attempted Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16. 320 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 341
replaces dot1dStpPortPathCost to support IEEE 802.1t. dot1dTp group Implementation of the dot1dTp sub-tree is optional. It is implemented by those bridges that support the transparent bridging mode. A transparent or SRT bridge will implement this sub-tree. Fabric OS MIB Reference 321 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 342
how frames addressed to port from its segment. NOTE: A frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including the bridge management frames. 322 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 343
Not accessible A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. dot1dStaticEntry 1.3.6.1.2.1.17 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 344
MAC address used by this bridge when it must be referred in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that .4.6.1.3 The number of times the associated dot1dTpPortInDiscards counter has overflowed. 324 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 345
(1) - Allows modified values of dot1qPortAcceptableFrameTypes. • dot1qIngressFiltering (2) - Supports the discarding of any frame received on a port, whose VLAN classification does not include that port in its member set. Fabric OS MIB Reference 325 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 346
1.3.6.1.2.1.17.7.1.1.3 Read only Read only Read only The version number of IEEE 802.1Q that the device supports. The maximum IEEE 802.1Q VLAN-ID that the device supports. The maximum number of IEEE 802.1Q VLANs that the device supports. 326 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 347
instance of dot1qTpFdbAddress has been seen. A value of 0 indicates that the port number has not been learned but that the device does have some forwarding or filtering information about this address (for example, in the dot1qStaticUnicastTable). Fabric OS MIB Reference 327 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 348
dynamically by GMRP, or configured statically by management. dot1qForwardAllStaticPorts Read-write The set of ports configured by management in this VLAN to which all 1.3.6.1.2.1.17.7.1.2.4.1.2 multicast group-addressed frames are to be forwarded. 328 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 349
17.7.1.3.1.1.3 Read-write The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports on which a specific unicast address may be dynamically learned. Fabric OS MIB Reference 329 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 350
1.3.6.1.2.1.17.7.1.3.2.1.3 Read-write The set of port s to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must be forwarded, regardless of any dynamic information, for example, from GMRP. 330 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 351
Read only The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames. dot1qVlanCurrentUntagged Read only Ports 1.3.6.1.2.1.17.7.1.4.2.1.5 The set of ports that are transmitting traffic for this VLAN as untagged frames. Fabric OS MIB Reference 331 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 352
management. dot1qVlanForbiddenEgress Read Ports create 1.3.6.1.2.1.17.7.1.4.3.1.3 The set of ports that are prohibited by management management frames received from other devices that are classified as belonging to this VLAN (for example, GMRP, but not GVRP or STP). 332 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 353
Read-write ration 1.3.6.1.2.1.17.2.19.1.1 When operating in RSTP (version 2) mode, writing true (1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false (2) when read. Fabric OS MIB Reference 333 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 354
re-initializations of the management system. The operational point-to-point status of the LAN segment attached to this port. The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. 334 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 355
•BD MIB objects overview 335 •BD Traps 336 •BD configuration 337 •BD statistics 337 BD MIB objects overview The descriptions of bdTraps - bdTrap 1.3.6.1.4.1.1588.2.1.1.51.0.1 - bdClearTrap 1.3.6.1.4.1.1588.2.1.1.51.0.2 FIGURE 120 bdTraps hierarchy Fabric OS MIB Reference 335 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 356
bdAvgFrameSize Description This trap is sent for both latency bottleneck and congestion bottleneck with nBDType accordingly. This trap is triggered when the threshold is exceeded. This trap is sent after a latency or congestion bottleneck is cleared. 336 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 357
configuration. switch. Valid values: • true (1) • false (2) bdLThreshold Read only 1.3.6.1.4.1.1588.2.1.1.51.1.2 This object is the severity threshold for latency this parameter applies to both latency and congestion monitoring. In this duration, there Fabric OS MIB Reference 337 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 358
maximum 30 samples per port for congestion bottleneck and 30 samples per port for latency bottleneck. Each sample in sample is an average of 300 samples collected every second. ports during the averaging window. This is accessible only for bdTrap and bdClearTrap. 338 Fabric OS MIB Reference - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 359
and end device variables 340 •SNMP configuration variables 340 •iSCSI instance information variables 341 Switch variables MIB variables that assist in monitoring or modifying the status of switches are in the following tables or groups. •connUnitTable 205 •connUnitRevsTable 211 •FIBRE-CHANNEL - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 360
group 149 End Device variables •connUnitLinkTable 223 •fcFxLoginTable 82 •swFCPortName 156 SNMP configuration variables MIB variables that assist in configuring SNMP are in the following tables or groups. •trapRegTable 232 •Switch agent configuration group 151 340 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 361
gathering information about iSCSI instances are in the following tables. •iSCSI instance attributes table 254 •iSCSI node attributes table 255 •iSCSI session statistics table 259 Fabric OS MIB Reference 341 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 362
A iSCSI instance information variables 342 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 363
1588.2.1.1.1.27.1.16 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 Not supported connUnitPortStatCountTxMulticastObjects 47 connUnitPortStatCountFramesTooLong 1.3.6.1.3.94.4.5.1.50 swConnUnitBadEOF 1.3.6.1.4.1.1588.2.1.1.1.27.1.15 Fabric OS MIB Reference 343 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 364
27.1.2 portErrShow command Table 135 lists the counters displayed by the portErrShow command and the corresponding MIB objects. TABLE 135 portErrShow command Counters MIB 1.3.6.1.4.1.1588.2.1.1.1.27.1.1 1.3.6.1.3.94.4.5.1.40 1.3.6.1.3.94.4.5.1.47 344 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 365
command Table 136 lists the counters displayed by the portStats64Show command and the corresponding MIB objects. TABLE 136 portStats64Show command 16 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 Not supported 1588.2.1.1.1.27.1.15 Fabric OS MIB Reference 345 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 366
supported stat64_PBSYFrames Not supported stat64_inputBuffersFull Not supported stat64_rxClass1Frames Not supported portShow command 1.3.6.1.4.1.1588.2.1.1.1.27.1.24 Tx_unavail swConnUnitTxBufferUnavailable 1.3.6.1.4.1.1588 .4.5.1.10 346 Fabric OS MIB Reference 53-1002750 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 367
, 93 configuring SNMP, 20 connectivity group, 204, 254 CPU or memory usage group, 174 D definitions for entity MIB, 105 definitions for Fcfabric-Element-MIB, 91 definitions for Fcmgmt-MIB, 203, 254 definitions for Fibre-Channel-fe-MIB, 74 disabling MIBs, 5 E EGP group, 48 Fabric OS MIB Reference 53 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 368
265 SNMP trap registration group, 232 SNMP traps for FICON, 187 snmpConfig command, 4, 20 SNMPv2 MIB overview, 263 statistics group, 225 status group, 80 sw agent configuration group, 151 sw MIB overview, 123 sw traps, 135 switch group, 169 switch variables, 339 Fabric OS MIB Reference 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 369
switchStatusPolicySet command, 5 sw-MIB system organization of MIB objects, 123 system group, 32, 141, 264 T TCP group MIBs, 3 understanding SNMP bASICs, 2 unsupported tables, 233 unsupported traps, 234 usmMIBObjects group, 270 usmMIBObjects overview, 269 Fabric OS MIB Reference 349 53-1002750-01 - Dell Brocade 300 | Fabric OS MIB Reference v7.1.0 - Page 370
350 Fabric OS MIB Reference 53-1002750-01
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
 |
 |
53-1002750-01
14 December 2012
®
Fabric OS
MIB Reference
Supporting Fabric OS v7.1.0