Dell C7017T Web Management for Monitors Users Guide
Dell C7017T Manual
View all Dell C7017T manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell C7017T manual content summary:
- Dell C7017T | Web Management for Monitors Users Guide - Page 1
Input Source Selection, Brightness and Volume. Before accessing the Dell Monitor Web Management feature, ensure that you have a working appears and is shown on Top - left corner for 5 seconds . To access the Dell Monitor Web Management tool you need to set the IP Addresses for your computer and the - Dell C7017T | Web Management for Monitors Users Guide - Page 2
tab, specify an IP Address by selecting Use the following IP Address and enter the following values: For IP Address: 10.0.50.101 and for Subnet Mask: 255.0.0.0 (leave all other entries as blanks). 3. The IP Address configuration would now look like this: 2 Dell Web Management for Monitors - Dell C7017T | Web Management for Monitors Users Guide - Page 3
To access and use the web management tool, follow these steps: 1. Open a web browser and type the monitor's IP Address (10.0.50.100) in the address bar. Dell Web Management for Monitors 3 - Dell C7017T | Web Management for Monitors Users Guide - Page 4
2. The log-in page opens. Enter the Administrator Password to continue. 3. The Home page opens: 4 Dell Web Management for Monitors - Dell C7017T | Web Management for Monitors Users Guide - Page 5
4. Click Network Settings tab to see the network settings. 5. Click Monitor Control to see the monitor's status. It takes about 3 to 5 mins for the monitor information to be updated on the Web Management. Dell Web Management for Monitors 5 - Dell C7017T | Web Management for Monitors Users Guide - Page 6
6. Click Security to set a password. 7. Update Firmware for your monitor's network card. You can download the latest network firmware, if available, from the Dell Support website at www.dell.com/support. 6 Dell Web Management for Monitors
Dell Web Management for Monitors
1
Dell Web Management for Monitors
This monitor comes with networking capability which lets you remotely access and
change settings such as Input Source Selection, Brightness and Volume.
Before accessing the Dell Monitor Web Management feature, ensure that you have a
working Ethernet cable connected to the RJ45 port at the rear of the monitor.
•
Ethernet Enable
Press and hold the Button 1 and Button 3 on the front panel for 3 seconds to turn on , A
network icon
appears and is shown on Top - left corner for 5 seconds .
•
Ethernet Disable
Press and hold the Button 1 and Button 3 on the front panel for 3 seconds to turn off , A
network icon
appears and is shown on Top - left corner for 5 seconds .
To access the Dell Monitor Web Management tool you need to set the IP Addresses for
your computer and the monitor.
1.
Press the
Menu
key on the remote control to display the IP Address of the monitor,
or by navigating to OSD Menu >
Others
. By default, the IP Address is 10.0.50.100